include/configs/display5.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2017
   4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11
  12 /* Falcon Mode */
  13 #define CONFIG_CMD_SPL
  14 #define CONFIG_SYS_SPL_ARGS_ADDR        0x18000000
  15 #define CONFIG_CMD_SPL_WRITE_SIZE       (44 * SZ_1K)
  16
  17 /* Falcon Mode - MMC support */
  18 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x3F00
  19 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  \
  20         (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  21 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x100   /* 128KiB */
  22
  23 /*
  24  * display5 SPI-NOR memory layout
  25  *
  26  * The definition can be found in Kconfig's
  27  * CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT
  28  *
  29  * 0x000000 - 0x020000 : SPI.SPL (128KiB)
  30  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  31  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  32  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
  33  * 0x140000 - 0x940000 : SPI.fitImage-recovery (8MiB)
  34  * 0x940000 - 0xD40000 : SPI.swupdate-kernel-FIT (4MiB)
  35  * 0xD40000 - 0x1540000 : SPI.swupdate-initramfs  (8MiB)
  36  */
  37
  38 #ifndef CONFIG_SPL_BUILD
  39 #define CONFIG_MTD_DEVICE
  40 #define CONFIG_SPI_FLASH_MTD
  41 #define CONFIG_MTD_PARTITIONS
  42 #endif
  43
  44 /* Below values are "dummy" - only to avoid build break */
  45 #define CONFIG_SYS_SPI_KERNEL_OFFS      0x150000
  46 #define CONFIG_SYS_SPI_ARGS_OFFS        0x140000
  47 #define CONFIG_SYS_SPI_ARGS_SIZE        0x10000
  48
  49 #include "imx6_spl.h"
  50 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
  51
  52 #define CONFIG_CMDLINE_TAG
  53 #define CONFIG_SETUP_MEMORY_TAGS
  54 #define CONFIG_INITRD_TAG
  55 #define CONFIG_REVISION_TAG
  56
  57 /* Size of malloc() pool */
  58 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  59 #define CONFIG_MISC_INIT_R
  60
  61 /*#define CONFIG_MXC_UART*/
  62 #define CONFIG_MXC_UART_BASE            UART5_BASE
  63
  64 /* SPI NOR Flash */
  65 #ifdef CONFIG_CMD_SF
  66 #define CONFIG_SF_DEFAULT_BUS           1
  67 #define CONFIG_SF_DEFAULT_CS            (0 | (IMX_GPIO_NR(5, 29) << 8))
  68 #define CONFIG_SF_DEFAULT_SPEED         50000000
  69 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  70 #endif
  71
  72 /* I2C Configs */
  73 #define CONFIG_SYS_I2C
  74 #define CONFIG_SYS_I2C_MXC
  75 #define CONFIG_SYS_I2C_MXC_I2C1
  76 #define CONFIG_SYS_I2C_MXC_I2C2
  77 #define CONFIG_SYS_I2C_MXC_I2C3
  78 #define CONFIG_I2C_MULTI_BUS
  79 #define CONFIG_SYS_I2C_SPEED            100000
  80 #define CONFIG_I2C_EDID
  81 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
  82
  83 /* Ethernet */
  84 #ifdef CONFIG_FEC_MXC
  85 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  86 #define CONFIG_FEC_XCV_TYPE             RGMII
  87 #define CONFIG_ETHPRIME                 "FEC"
  88 #define CONFIG_FEC_MXC_PHYADDR          0
  89 #define CONFIG_MII
  90 #endif
  91
  92 /* MMC Configs */
  93 #define CONFIG_FSL_USDHC
  94 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  95 #define CONFIG_SYS_FSL_USDHC_NUM        2
  96 #define CONFIG_SUPPORT_EMMC_BOOT
  97
  98 /* allow to overwrite serial and ethaddr */
  99 #define CONFIG_ENV_OVERWRITE
 100 #define CONFIG_BAUDRATE                 115200
 101
 102 #ifndef CONFIG_BOOTCOMMAND
 103 #define CONFIG_BOOTCOMMAND "run boot_mmc"
 104 #endif
 105
 106 #define PARTS_DEFAULT \
 107         /* Linux partitions */ \
 108         "partitions=" \
 109         "uuid_disk=${uuid_gpt_disk};" \
 110         "name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
 111         "name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
 112         "name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
 113         "name=rootfs2,size=1528M,uuid=${uuid_gpt_rootfs2};" \
 114         "name=data,size=-,uuid=${uuid_gpt_data}\0"
 115
 116 #define FACTORY_PROCEDURE \
 117         "echo '#######################';" \
 118         "echo '# Factory Boot        #';" \
 119         "echo '#######################';" \
 120         "env default -a;" \
 121         "saveenv;" \
 122         "gpt write mmc ${mmcdev} ${partitions};" \
 123         "run tftp_sf_SPL;" \
 124         "run tftp_sf_uboot;" \
 125         TFTP_UPDATE_KERNEL \
 126         "run tftp_sf_fitImg_recovery;" \
 127         "run tftp_sf_fitImg_SWU;" \
 128         "run tftp_sf_initramfs_SWU;" \
 129         TFTP_UPDATE_ROOTFS \
 130         "echo '#######################';" \
 131         "echo '# END - OK            #';" \
 132         "echo '#######################';" \
 133         "setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
 134         "setenv boot_os 'n';" \
 135         "saveenv;" \
 136         "reset;"
 137
 138 #define SWUPDATE_RECOVERY_PROCEDURE \
 139         "echo '#######################';" \
 140         "echo '# RECOVERY SWUupdate  #';" \
 141         "echo '#######################';" \
 142         "setenv loadaddr_swu_initramfs 0x14000000;" \
 143         "setenv bootargs console=${console} " \
 144                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
 145                 ":${hostname}::off root=/dev/ram rw;" \
 146         "sf probe;" \
 147         "sf read ${loadaddr} swu-kernel;" \
 148         "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
 149         "bootm ${loadaddr} ${loadaddr_swu_initramfs};"
 150
 151 #define KERNEL_RECOVERY_PROCEDURE \
 152         "echo '#######################';" \
 153         "echo '# RECOVERY KERNEL IMG #';" \
 154         "echo '#######################';" \
 155         "sf probe;" \
 156         "sf read ${loadaddr} lin-recovery;" \
 157         "bootm;"
 158
 159 #define SETUP_BOOTARGS \
 160         "run set_rootfs_part;" \
 161         "setenv bootargs ${bootargs} console=${console} "         \
 162                       "root=/dev/mmcblk${mmcdev}p${rootfs_part} " \
 163                       "rootwait rootfstype=ext4 rw; " \
 164         "run set_kernel_part;" \
 165         "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 166         "mmc read ${loadaddr} ${lba_start} 0x2000; " \
 167         "setenv fdt_conf imx6q-${board}-${display}.dtb; "
 168
 169 /* All the numbers are in LBAs */
 170 #define __TFTP_UPDATE_KERNEL \
 171         "tftp_mmc_fitImg=" \
 172            "if test ! -n ${kernel_part}; then " \
 173                "setenv kernel_part ${kernel_part_active};" \
 174            "fi;" \
 175            "if tftp ${loadaddr} ${kernel_file}; then " \
 176                "setexpr fw_sz ${filesize} / 0x200; " \
 177                "setexpr fw_sz ${fw_sz} + 1; "  \
 178                "part start mmc ${mmcdev} ${kernel_part} lba_start; " \
 179                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 180            "; fi\0" \
 181
 182 #define TFTP_UPDATE_KERNEL \
 183         "setenv kernel_part ${kernel_part_active};" \
 184         "run tftp_mmc_fitImg;" \
 185         "setenv kernel_part ${kernel_part_backup};" \
 186         "run tftp_mmc_fitImg;" \
 187
 188 #define __TFTP_UPDATE_ROOTFS \
 189         "tftp_mmc_rootfs=" \
 190            "if test ! -n ${rootfs_part}; then " \
 191                "setenv rootfs_part ${rootfs_part_active};" \
 192            "fi;" \
 193            "if tftp ${loadaddr} ${rootfs_file}; then " \
 194                "setexpr fw_sz ${filesize} / 0x200; " \
 195                "setexpr fw_sz ${fw_sz} + 1; "  \
 196                "part start mmc ${mmcdev} ${rootfs_part} lba_start; " \
 197                "mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
 198            "; fi\0" \
 199
 200 /* To save some considerable time, we only once download the rootfs image */
 201 /* and store it on 'active' and 'backup' rootfs partitions */
 202 #define TFTP_UPDATE_ROOTFS \
 203         "setenv rootfs_part ${rootfs_part_active};" \
 204         "run tftp_mmc_rootfs;" \
 205         "part start mmc ${mmcdev} ${rootfs_part_backup} lba_start;" \
 206         "mmc write ${loadaddr} ${lba_start} ${fw_sz};" \
 207
 208 #define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 209         "tftp_sf_fitImg_SWU=" \
 210             "if tftp ${loadaddr} ${kernel_file}; then " \
 211                 "sf probe;" \
 212                 "sf erase swu-kernel +${filesize};" \
 213                 "sf write ${loadaddr} swu-kernel ${filesize};" \
 214         "; fi\0"          \
 215
 216 #define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 217         "swu_initramfs_file=swupdate-image-display5.ext3.gz.u-boot\0" \
 218         "tftp_sf_initramfs_SWU=" \
 219             "if tftp ${loadaddr} ${swu_initramfs_file}; then " \
 220                 "sf probe;" \
 221                 "sf erase swu-initramfs +${filesize};" \
 222                 "sf write ${loadaddr} swu-initramfs ${filesize};" \
 223         "; fi\0"          \
 224
 225 #define TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
 226         "kernel_recovery_file=fitImage-initramfs\0" \
 227         "tftp_sf_fitImg_recovery=" \
 228             "if tftp ${loadaddr} ${kernel_recovery_file}; then " \
 229                 "sf probe;" \
 230                 "sf erase lin-recovery +${filesize};" \
 231                 "sf write ${loadaddr} lin-recovery ${filesize};" \
 232         "; fi\0"          \
 233
 234 #define TFTP_UPDATE_BOOTLOADER \
 235         "ubootfile=u-boot.img\0" \
 236         "ubootfileSPL=SPL\0" \
 237         "tftp_sf_uboot=" \
 238             "if tftp ${loadaddr} ${ubootfile}; then " \
 239                 "sf probe;" \
 240                 "sf erase u-boot +${filesize};" \
 241                 "sf write ${loadaddr} u-boot ${filesize}" \
 242         "; fi\0"          \
 243         "tftp_sf_SPL="    \
 244             "if tftp ${loadaddr} ${ubootfileSPL}; then " \
 245                 "sf probe;" \
 246                 "setexpr uboot_SPL_size ${filesize} + 0x400;" \
 247                 "sf erase 0x0 +${uboot_SPL_size};" \
 248                 "sf write ${loadaddr} 0x400 ${filesize};" \
 249         "fi\0" \
 250
 251 #define CONFIG_EXTRA_ENV_SETTINGS         \
 252         PARTS_DEFAULT \
 253         "display=tianma-tm070-800x480\0" \
 254         "board=display5\0" \
 255         "mmcdev=0\0" \
 256         "altbootcmd=run recovery\0" \
 257         "bootdelay=1\0" \
 258         "baudrate=115200\0" \
 259         "bootcmd=" CONFIG_BOOTCOMMAND "\0" \
 260         "factory=" FACTORY_PROCEDURE "\0" \
 261         "bootlimit=3\0" \
 262         "ethact=FEC\0" \
 263         "netdev=eth0\0" \
 264         "boot_os=y\0" \
 265         "hostname=display5\0" \
 266         "loadaddr=0x12000000\0" \
 267         "fdtaddr=0x12800000\0" \
 268         "console=ttymxc4,115200 quiet\0" \
 269         "fdtfile=imx6q-display5.dtb\0" \
 270         "fdt_high=0xffffffff\0" \
 271         "initrd_high=0xffffffff\0" \
 272         "kernel_file=fitImage\0" \
 273         "up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 274         "download_kernel=" \
 275                 "tftpboot ${loadaddr} ${kernel_file};\0" \
 276         "boot_kernel_recovery=" KERNEL_RECOVERY_PROCEDURE "\0" \
 277         "boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 278         "recovery=" \
 279         "if test ${BOOT_FROM_RECOVERY} = SWU; then " \
 280              "echo BOOT: RECOVERY: SWU;" \
 281              "run boot_swu_recovery;" \
 282         "else " \
 283              "echo BOOT: RECOVERY: Linux;" \
 284              "run boot_kernel_recovery;" \
 285         "fi\0" \
 286         "boot_tftp=" \
 287         "if run download_kernel; then "   \
 288              "setenv bootargs console=${console} " \
 289              "root=/dev/mmcblk0p2 rootwait;" \
 290              "bootm ${loadaddr} - ${fdtaddr};" \
 291         "fi\0" \
 292         "addip=setenv bootargs ${bootargs} " \
 293         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 294             "${hostname}:eth0:on"         \
 295         "\0"      \
 296         "nfsargs=setenv bootargs " \
 297         "root=/dev/nfs rw "       \
 298         "nfsroot=${serverip}:${rootpath},nolock,nfsvers=3" \
 299         "\0" \
 300         "rootpath=/srv/tftp/DISP5/rootfs\0" \
 301         "boot_nfs=" \
 302         "if run download_kernel; then "   \
 303              "run nfsargs;"       \
 304              "run addip;"         \
 305              "setenv bootargs ${bootargs} console=${console};"    \
 306              "setenv fdt_conf imx6q-${board}-${display}.dtb; " \
 307              "bootm ${loadaddr}#conf@${fdt_conf};" \
 308         "fi\0" \
 309         "falcon_setup=" \
 310         "if mmc dev ${mmcdev}; then "     \
 311              SETUP_BOOTARGS \
 312              "spl export fdt ${loadaddr}#conf@${fdt_conf};" \
 313              "setexpr fw_sz ${fdtargslen} / 0x200; " \
 314              "setexpr fw_sz ${fw_sz} + 1; "  \
 315              "mmc write ${fdtargsaddr} " \
 316              __stringify(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR)" ${fw_sz}; " \
 317         "fi\0" \
 318         "boot_mmc=" \
 319         "if mmc dev ${mmcdev}; then "     \
 320              SETUP_BOOTARGS \
 321              "bootm ${loadaddr}#conf@${fdt_conf};" \
 322         "fi\0" \
 323         "set_kernel_part=" \
 324         "if test ${BOOT_FROM} = ACTIVE; then " \
 325              "setenv kernel_part ${kernel_part_active};" \
 326              "echo BOOT: ACTIVE;" \
 327         "else if test ${BOOT_FROM} = BACKUP; then " \
 328              "setenv kernel_part ${kernel_part_backup};" \
 329              "echo BOOT: BACKUP;" \
 330         "else " \
 331              "run recovery;" \
 332         "fi;fi\0" \
 333         "set_rootfs_part=" \
 334         "if test ${BOOT_FROM} = ACTIVE; then " \
 335              "setenv rootfs_part ${rootfs_part_active};" \
 336         "else if test ${BOOT_FROM} = BACKUP; then " \
 337              "setenv rootfs_part ${rootfs_part_backup};" \
 338         "else " \
 339              "run recovery;" \
 340         "fi;fi\0" \
 341         "BOOT_FROM=ACTIVE\0" \
 342         "BOOT_FROM_RECOVERY=Linux\0" \
 343         TFTP_UPDATE_BOOTLOADER \
 344         "kernel_part_active=1\0" \
 345         "kernel_part_backup=3\0" \
 346         __TFTP_UPDATE_KERNEL \
 347         "rootfs_part_active=2\0" \
 348         "rootfs_part_backup=4\0" \
 349         "rootfs_file=core-image-lwn-display5.ext4\0" \
 350         __TFTP_UPDATE_ROOTFS \
 351         TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
 352         TFTP_UPDATE_RECOVERY_SWU_KERNEL \
 353         TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
 354         "\0" \
 355
 356 /* Miscellaneous configurable options */
 357 #undef CONFIG_SYS_CBSIZE
 358 #define CONFIG_SYS_CBSIZE               2048
 359
 360 /* Print Buffer Size */
 361 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 362                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 363 #define CONFIG_SYS_MAXARGS              32
 364 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 365
 366 #define CONFIG_STANDALONE_LOAD_ADDR     0x10001000
 367 #define CONFIG_SYS_HZ                   1000
 368
 369 /* Physical Memory Map */
 370 #define CONFIG_NR_DRAM_BANKS            1
 371 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 372 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 373
 374 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 375 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 376
 377 #define CONFIG_SYS_INIT_SP_OFFSET \
 378         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 379 #define CONFIG_SYS_INIT_SP_ADDR \
 380         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 381
 382 /* Commands */
 383 #define CONFIG_MTD_PARTITIONS
 384 #define CONFIG_MTD_DEVICE
 385
 386 /* ENV config */
 387 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
 388 #define CONFIG_ENV_SIZE         (SZ_64K)
 389 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
 390 #define CONFIG_ENV_OFFSET               (0x120000)
 391 #define CONFIG_ENV_SECT_SIZE            (SZ_64K)
 392 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 393 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 394                                                 CONFIG_ENV_SECT_SIZE)
 395 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 396
 397 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 398 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 399 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 400 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 401 #endif
 402
 403 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 404 #endif /* __CONFIG_H */