2 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_DB_88F6820_GP_H
8 #define _CONFIG_DB_88F6820_GP_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_ARMADA_XP /* SOC Family Name */
14 #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */
16 #define CONFIG_SYS_L2_PL310
18 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
19 #define CONFIG_SYS_GENERIC_BOARD
20 #define CONFIG_DISPLAY_BOARDINFO_LATE
22 #define CONFIG_SYS_TEXT_BASE 0x04000000
23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
26 * Commands configuration
28 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
29 #define CONFIG_CMD_CACHE
30 #define CONFIG_CMD_DHCP
31 #define CONFIG_CMD_ENV
32 #define CONFIG_CMD_EXT2
33 #define CONFIG_CMD_EXT4
34 #define CONFIG_CMD_FAT
35 #define CONFIG_CMD_FS_GENERIC
36 #define CONFIG_CMD_I2C
37 #define CONFIG_CMD_MMC
38 #define CONFIG_CMD_PING
40 #define CONFIG_CMD_SPI
41 #define CONFIG_CMD_TFTPPUT
42 #define CONFIG_CMD_TIME
45 #define CONFIG_SYS_I2C
46 #define CONFIG_SYS_I2C_MVTWSI
47 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
48 #define CONFIG_SYS_I2C_SLAVE 0x0
49 #define CONFIG_SYS_I2C_SPEED 100000
51 /* SPI NOR flash default params, used by sf commands */
52 #define CONFIG_SF_DEFAULT_SPEED 1000000
53 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
54 #define CONFIG_SPI_FLASH_STMICRO
57 * SDIO/MMC Card Configuration
60 #define CONFIG_MMC_SDMA
61 #define CONFIG_GENERIC_MMC
63 #define CONFIG_MV_SDHCI
64 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
66 /* Partition support */
67 #define CONFIG_DOS_PARTITION
68 #define CONFIG_EFI_PARTITION
70 /* Additional FS support/configuration */
71 #define CONFIG_SUPPORT_VFAT
73 /* Environment in SPI NOR flash */
74 #define CONFIG_ENV_IS_IN_SPI_FLASH
75 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
76 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
77 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
79 #define CONFIG_PHY_MARVELL /* there is a marvell phy */
80 #define CONFIG_PHY_ADDR { 1, 0 }
81 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
82 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
84 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
85 #define CONFIG_SYS_ALT_MEMTEST
87 /* Keep device tree and initrd in lower memory so the kernel can access them */
88 #define CONFIG_EXTRA_ENV_SETTINGS \
89 "fdt_high=0x10000000\0" \
90 "initrd_high=0x10000000\0"
93 * mv-common.h should be defined after CMD configs since it used them
94 * to enable certain macros
96 #include "mv-common.h"
98 #endif /* _CONFIG_DB_88F6820_GP_H */