include/configs/cyrus.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Based on corenet_ds.h
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
  10 #error Must call Cyrus CONFIG with a specific CPU enabled.
  11 #endif
  12
  13 #define CONFIG_SDCARD
  14 #define CONFIG_FSL_SATA_V2
  15 #define CONFIG_PCIE3
  16 #define CONFIG_PCIE4
  17 #ifdef CONFIG_ARCH_P5020
  18 #define CONFIG_SYS_FSL_RAID_ENGINE
  19 #define CONFIG_SYS_DPAA_RMAN
  20 #endif
  21 #define CONFIG_SYS_DPAA_PME
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
  29 #if defined(CONFIG_ARCH_P5020)
  30 #define CONFIG_SYS_CLK_FREQ 133000000
  31 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
  32 #elif defined(CONFIG_ARCH_P5040)
  33 #define CONFIG_SYS_CLK_FREQ 100000000
  34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  39
  40 #define CONFIG_SYS_MMC_MAX_DEVICE     1
  41
  42 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  43 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  44 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  45 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  46 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  47 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  48
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 #if defined(CONFIG_SDCARD)
  52 #define CONFIG_SYS_EXTRA_ENV_RELOC
  53 #define CONFIG_FSL_FIXED_MMC_LOCATION
  54 #define CONFIG_SYS_MMC_ENV_DEV          0
  55 #define CONFIG_ENV_SIZE                 0x2000
  56 #define CONFIG_ENV_OFFSET               (512 * 1658)
  57 #endif
  58
  59 /*
  60  * These can be toggled for performance analysis, otherwise use default.
  61  */
  62 #define CONFIG_SYS_CACHE_STASHING
  63 #define CONFIG_BACKSIDE_L2_CACHE
  64 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  65 #define CONFIG_BTB                      /* toggle branch predition */
  66 #define CONFIG_DDR_ECC
  67 #ifdef CONFIG_DDR_ECC
  68 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  69 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  70 #endif
  71
  72 #define CONFIG_ENABLE_36BIT_PHYS
  73
  74 #ifdef CONFIG_PHYS_64BIT
  75 #define CONFIG_ADDR_MAP
  76 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  77 #endif
  78
  79 /* test POST memory test */
  80 #undef CONFIG_POST
  81 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  82 #define CONFIG_SYS_MEMTEST_END          0x00400000
  83
  84 /*
  85  *  Config the L3 Cache as L3 SRAM
  86  */
  87 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  88 #ifdef CONFIG_PHYS_64BIT
  89 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
  90 #else
  91 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
  92 #endif
  93 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
  94 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
  95
  96 #ifdef CONFIG_PHYS_64BIT
  97 #define CONFIG_SYS_DCSRBAR              0xf0000000
  98 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  99 #endif
 100
 101 /*
 102  * DDR Setup
 103  */
 104 #define CONFIG_VERY_BIG_RAM
 105 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 106 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 107
 108 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 109 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 110
 111 #define CONFIG_DDR_SPD
 112
 113 #define CONFIG_SYS_SPD_BUS_NUM  1
 114 #define SPD_EEPROM_ADDRESS1     0x51
 115 #define SPD_EEPROM_ADDRESS2     0x52
 116 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 117
 118 /*
 119  * Local Bus Definitions
 120  */
 121
 122 #define CONFIG_SYS_LBC0_BASE            0xe0000000 /* Start of LBC Registers */
 123 #ifdef CONFIG_PHYS_64BIT
 124 #define CONFIG_SYS_LBC0_BASE_PHYS       0xfe0000000ull
 125 #else
 126 #define CONFIG_SYS_LBC0_BASE_PHYS       CONFIG_SYS_LBC0_BASE
 127 #endif
 128
 129 #define CONFIG_SYS_LBC1_BASE            0xe1000000 /* Start of LBC Registers */
 130 #ifdef CONFIG_PHYS_64BIT
 131 #define CONFIG_SYS_LBC1_BASE_PHYS       0xfe1000000ull
 132 #else
 133 #define CONFIG_SYS_LBC1_BASE_PHYS       CONFIG_SYS_LBC1_BASE
 134 #endif
 135
 136 /* Set the local bus clock 1/16 of platform clock */
 137 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_16 | LCRR_EADC_1)
 138
 139 #define CONFIG_SYS_BR0_PRELIM \
 140 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
 141 #define CONFIG_SYS_BR1_PRELIM \
 142 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
 143
 144 #define CONFIG_SYS_OR0_PRELIM   0xfff00010
 145 #define CONFIG_SYS_OR1_PRELIM   0xfff00010
 146
 147 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 148
 149 #if defined(CONFIG_RAMBOOT_PBL)
 150 #define CONFIG_SYS_RAMBOOT
 151 #endif
 152
 153 #define CONFIG_HWCONFIG
 154
 155 /* define to use L1 as initial stack */
 156 #define CONFIG_L1_INIT_RAM
 157 #define CONFIG_SYS_INIT_RAM_LOCK
 158 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 159 #ifdef CONFIG_PHYS_64BIT
 160 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 161 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 162 /* The assembler doesn't like typecast */
 163 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 164         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 165           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 166 #else
 167 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 168 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 169 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 170 #endif
 171 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 172
 173 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 174 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 175
 176 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 177 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 178
 179 /* Serial Port - controlled on board with jumper J8
 180  * open - index 2
 181  * shorted - index 1
 182  */
 183 #define CONFIG_SYS_NS16550_SERIAL
 184 #define CONFIG_SYS_NS16550_REG_SIZE     1
 185 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 186
 187 #define CONFIG_SYS_BAUDRATE_TABLE       \
 188 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 189
 190 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 191 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 192 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 193 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 194
 195 /* I2C */
 196 #define CONFIG_SYS_I2C
 197 #define CONFIG_SYS_I2C_FSL
 198 #define CONFIG_I2C_MULTI_BUS
 199 #define CONFIG_I2C_CMD_TREE
 200 #define CONFIG_SYS_FSL_I2C_SPEED                400000  /* I2C speed and slave address */
 201 #define CONFIG_SYS_FSL_I2C_SLAVE                0x7F
 202 #define CONFIG_SYS_FSL_I2C_OFFSET               0x118000
 203 #define CONFIG_SYS_FSL_I2C2_SPEED               400000  /* I2C speed and slave address */
 204 #define CONFIG_SYS_FSL_I2C2_SLAVE               0x7F
 205 #define CONFIG_SYS_FSL_I2C2_OFFSET              0x118100
 206 #define CONFIG_SYS_FSL_I2C3_SPEED               400000  /* I2C speed and slave address */
 207 #define CONFIG_SYS_FSL_I2C3_SLAVE               0x7F
 208 #define CONFIG_SYS_FSL_I2C3_OFFSET              0x119000
 209 #define CONFIG_SYS_FSL_I2C4_SPEED               400000  /* I2C speed and slave address */
 210 #define CONFIG_SYS_FSL_I2C4_SLAVE               0x7F
 211 #define CONFIG_SYS_FSL_I2C4_OFFSET              0x119100
 212
 213 #define CONFIG_ID_EEPROM
 214 #define CONFIG_SYS_I2C_EEPROM_NXID
 215 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 217 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 218
 219 #define CONFIG_SYS_I2C_GENERIC_MAC
 220 #define CONFIG_SYS_I2C_MAC1_BUS 3
 221 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
 222 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
 223 #define CONFIG_SYS_I2C_MAC2_BUS 0
 224 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 225 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 226
 227 #define CONFIG_RTC_MCP79411             1
 228 #define CONFIG_SYS_RTC_BUS_NUM          3
 229 #define CONFIG_SYS_I2C_RTC_ADDR         0x6f
 230
 231 /*
 232  * eSPI - Enhanced SPI
 233  */
 234
 235 /*
 236  * General PCI
 237  * Memory space is mapped 1-1, but I/O space must start from 0.
 238  */
 239
 240 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 241 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 242 #ifdef CONFIG_PHYS_64BIT
 243 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 244 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 245 #else
 246 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 247 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 248 #endif
 249 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 250 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 251 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 252 #ifdef CONFIG_PHYS_64BIT
 253 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 254 #else
 255 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 256 #endif
 257 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 258
 259 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 260 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 261 #ifdef CONFIG_PHYS_64BIT
 262 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 263 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 264 #else
 265 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 266 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 267 #endif
 268 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 269 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 270 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 271 #ifdef CONFIG_PHYS_64BIT
 272 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 273 #else
 274 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 275 #endif
 276 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 277
 278 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 279 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 280 #ifdef CONFIG_PHYS_64BIT
 281 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 282 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 283 #else
 284 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 285 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 286 #endif
 287 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 288 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 289 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 290 #ifdef CONFIG_PHYS_64BIT
 291 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 292 #else
 293 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 294 #endif
 295 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 296
 297 /* controller 4, Base address 203000 */
 298 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 299 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 300 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 301 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 302 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 303 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 304
 305 /* Qman/Bman */
 306 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 307 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 308 #ifdef CONFIG_PHYS_64BIT
 309 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 310 #else
 311 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 312 #endif
 313 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 314 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 315 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 316 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 317 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 318 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 319                                          CONFIG_SYS_BMAN_CENA_SIZE)
 320 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 321 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 322 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 323 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 324 #ifdef CONFIG_PHYS_64BIT
 325 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 326 #else
 327 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 328 #endif
 329 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 330 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 331 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 332 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 333 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 334 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 335                                           CONFIG_SYS_QMAN_CENA_SIZE)
 336 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 337 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 338
 339 #define CONFIG_SYS_DPAA_FMAN
 340 /* Default address of microcode for the Linux Fman driver */
 341 /*
 342  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 343  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 344  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 345  */
 346 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 347 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 348
 349 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 350 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 351
 352 #ifdef CONFIG_SYS_DPAA_FMAN
 353 #define CONFIG_FMAN_ENET
 354 #endif
 355
 356 #ifdef CONFIG_PCI
 357 #define CONFIG_PCI_INDIRECT_BRIDGE
 358
 359 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 360 #endif  /* CONFIG_PCI */
 361
 362 /* SATA */
 363 #ifdef CONFIG_FSL_SATA_V2
 364 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 365 #define CONFIG_SATA1
 366 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 367 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 368 #define CONFIG_SATA2
 369 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 370 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 371
 372 #define CONFIG_LBA48
 373 #endif
 374
 375 #ifdef CONFIG_FMAN_ENET
 376 #define CONFIG_SYS_TBIPA_VALUE  8
 377 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 378 #endif
 379
 380 /*
 381  * Environment
 382  */
 383 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 384 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 385
 386 /*
 387  * USB
 388  */
 389 #define CONFIG_HAS_FSL_DR_USB
 390 #define CONFIG_HAS_FSL_MPH_USB
 391
 392 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 393 #define CONFIG_USB_EHCI_FSL
 394 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 395 #define CONFIG_EHCI_IS_TDI
 396  /* _VIA_CONTROL_EP  */
 397 #endif
 398
 399 #ifdef CONFIG_MMC
 400 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 401 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 402 #endif
 403
 404 /*
 405  * Miscellaneous configurable options
 406  */
 407 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 408
 409 /*
 410  * For booting Linux, the board info and command line data
 411  * have to be in the first 64 MB of memory, since this is
 412  * the maximum mapped by the Linux kernel during initialization.
 413  */
 414 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 415 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 416
 417 #ifdef CONFIG_CMD_KGDB
 418 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 419 #endif
 420
 421 /*
 422  * Environment Configuration
 423  */
 424 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 425 #define CONFIG_BOOTFILE         "uImage"
 426 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 427
 428 /* default location for tftp and bootm */
 429 #define CONFIG_LOADADDR         1000000
 430
 431 #define __USB_PHY_TYPE  utmi
 432
 433 #define CONFIG_EXTRA_ENV_SETTINGS \
 434 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 435 "bank_intlv=cs0_cs1;"                                   \
 436 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 437 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 438 "netdev=eth0\0"                                         \
 439 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 440 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 441 "consoledev=ttyS0\0"                                    \
 442 "ramdiskaddr=2000000\0"                                 \
 443 "fdtaddr=1e00000\0"                                     \
 444 "bdev=sda3\0"
 445
 446 #define CONFIG_HDBOOT                                   \
 447 "setenv bootargs root=/dev/$bdev rw "           \
 448 "console=$consoledev,$baudrate $othbootargs;"   \
 449 "tftp $loadaddr $bootfile;"                     \
 450 "tftp $fdtaddr $fdtfile;"                       \
 451 "bootm $loadaddr - $fdtaddr"
 452
 453 #define CONFIG_NFSBOOTCOMMAND                   \
 454 "setenv bootargs root=/dev/nfs rw "     \
 455 "nfsroot=$serverip:$rootpath "          \
 456 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 457 "console=$consoledev,$baudrate $othbootargs;"   \
 458 "tftp $loadaddr $bootfile;"             \
 459 "tftp $fdtaddr $fdtfile;"               \
 460 "bootm $loadaddr - $fdtaddr"
 461
 462 #define CONFIG_RAMBOOTCOMMAND                           \
 463 "setenv bootargs root=/dev/ram rw "             \
 464 "console=$consoledev,$baudrate $othbootargs;"   \
 465 "tftp $ramdiskaddr $ramdiskfile;"               \
 466 "tftp $loadaddr $bootfile;"                     \
 467 "tftp $fdtaddr $fdtfile;"                       \
 468 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 469
 470 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 471
 472 #include <asm/fsl_secure_boot.h>
 473
 474 #endif  /* __CONFIG_H */