include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_GENERIC_BOARD
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #include "../board/freescale/common/ics307_clk.h"
  17
  18 #ifdef CONFIG_RAMBOOT_PBL
  19 #ifdef CONFIG_SECURE_BOOT
  20 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  22 #ifdef CONFIG_NAND
  23 #define CONFIG_RAMBOOT_NAND
  24 #endif
  25 #define CONFIG_BOOTSCRIPT_COPY_RAM
  26 #else
  27 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  29 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  30 #if defined(CONFIG_P3041DS)
  31 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  32 #elif defined(CONFIG_P4080DS)
  33 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  34 #elif defined(CONFIG_P5020DS)
  35 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  36 #elif defined(CONFIG_P5040DS)
  37 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  38 #endif
  39 #endif
  40 #endif
  41
  42 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  43 /* Set 1M boot space */
  44 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  45 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  46                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  47 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  48 #define CONFIG_SYS_NO_FLASH
  49 #endif
  50
  51 /* High Level Configuration Options */
  52 #define CONFIG_BOOKE
  53 #define CONFIG_E500                     /* BOOKE e500 family */
  54 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  55 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  56 #define CONFIG_MP                       /* support multiple processors */
  57
  58 #ifndef CONFIG_SYS_TEXT_BASE
  59 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  60 #endif
  61
  62 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  63 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  64 #endif
  65
  66 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  67 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  68 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  69 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  70 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  71 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  72 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  73 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  74 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  75
  76 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  77
  78 #define CONFIG_ENV_OVERWRITE
  79
  80 #ifdef CONFIG_SYS_NO_FLASH
  81 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  82 #define CONFIG_ENV_IS_NOWHERE
  83 #endif
  84 #else
  85 #define CONFIG_FLASH_CFI_DRIVER
  86 #define CONFIG_SYS_FLASH_CFI
  87 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  88 #endif
  89
  90 #if defined(CONFIG_SPIFLASH)
  91 #define CONFIG_SYS_EXTRA_ENV_RELOC
  92 #define CONFIG_ENV_IS_IN_SPI_FLASH
  93 #define CONFIG_ENV_SPI_BUS              0
  94 #define CONFIG_ENV_SPI_CS               0
  95 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  96 #define CONFIG_ENV_SPI_MODE             0
  97 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  98 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  99 #define CONFIG_ENV_SECT_SIZE            0x10000
 100 #elif defined(CONFIG_SDCARD)
 101 #define CONFIG_SYS_EXTRA_ENV_RELOC
 102 #define CONFIG_ENV_IS_IN_MMC
 103 #define CONFIG_FSL_FIXED_MMC_LOCATION
 104 #define CONFIG_SYS_MMC_ENV_DEV          0
 105 #define CONFIG_ENV_SIZE                 0x2000
 106 #define CONFIG_ENV_OFFSET               (512 * 1658)
 107 #elif defined(CONFIG_NAND)
 108 #define CONFIG_SYS_EXTRA_ENV_RELOC
 109 #define CONFIG_ENV_IS_IN_NAND
 110 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 111 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 112 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 113 #define CONFIG_ENV_IS_IN_REMOTE
 114 #define CONFIG_ENV_ADDR         0xffe20000
 115 #define CONFIG_ENV_SIZE         0x2000
 116 #elif defined(CONFIG_ENV_IS_NOWHERE)
 117 #define CONFIG_ENV_SIZE         0x2000
 118 #else
 119 #define CONFIG_ENV_IS_IN_FLASH
 120 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 121 #define CONFIG_ENV_SIZE         0x2000
 122 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 123 #endif
 124
 125 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 126
 127 /*
 128  * These can be toggled for performance analysis, otherwise use default.
 129  */
 130 #define CONFIG_SYS_CACHE_STASHING
 131 #define CONFIG_BACKSIDE_L2_CACHE
 132 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 133 #define CONFIG_BTB                      /* toggle branch predition */
 134 #define CONFIG_DDR_ECC
 135 #ifdef CONFIG_DDR_ECC
 136 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 137 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 138 #endif
 139
 140 #define CONFIG_ENABLE_36BIT_PHYS
 141
 142 #ifdef CONFIG_PHYS_64BIT
 143 #define CONFIG_ADDR_MAP
 144 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 145 #endif
 146
 147 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 148 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 149 #define CONFIG_SYS_MEMTEST_END          0x00400000
 150 #define CONFIG_SYS_ALT_MEMTEST
 151 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 152
 153 /*
 154  *  Config the L3 Cache as L3 SRAM
 155  */
 156 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 157 #ifdef CONFIG_PHYS_64BIT
 158 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 159 #else
 160 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 161 #endif
 162 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 163 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 164
 165 #ifdef CONFIG_PHYS_64BIT
 166 #define CONFIG_SYS_DCSRBAR              0xf0000000
 167 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 168 #endif
 169
 170 /* EEPROM */
 171 #define CONFIG_ID_EEPROM
 172 #define CONFIG_SYS_I2C_EEPROM_NXID
 173 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 174 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 175 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 176
 177 /*
 178  * DDR Setup
 179  */
 180 #define CONFIG_VERY_BIG_RAM
 181 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 182 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 183
 184 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 185 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 186
 187 #define CONFIG_DDR_SPD
 188 #define CONFIG_SYS_FSL_DDR3
 189
 190 #define CONFIG_SYS_SPD_BUS_NUM  1
 191 #define SPD_EEPROM_ADDRESS1     0x51
 192 #define SPD_EEPROM_ADDRESS2     0x52
 193 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 194 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 195
 196 /*
 197  * Local Bus Definitions
 198  */
 199
 200 /* Set the local bus clock 1/8 of platform clock */
 201 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 202
 203 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 204 #ifdef CONFIG_PHYS_64BIT
 205 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 206 #else
 207 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 208 #endif
 209
 210 #define CONFIG_SYS_FLASH_BR_PRELIM \
 211                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 212                  | BR_PS_16 | BR_V)
 213 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 214                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 215
 216 #define CONFIG_SYS_BR1_PRELIM \
 217         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 218 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 219
 220 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 221 #ifdef CONFIG_PHYS_64BIT
 222 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 223 #else
 224 #define PIXIS_BASE_PHYS         PIXIS_BASE
 225 #endif
 226
 227 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 228 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 229
 230 #define PIXIS_LBMAP_SWITCH      7
 231 #define PIXIS_LBMAP_MASK        0xf0
 232 #define PIXIS_LBMAP_SHIFT       4
 233 #define PIXIS_LBMAP_ALTBANK     0x40
 234
 235 #define CONFIG_SYS_FLASH_QUIET_TEST
 236 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 237
 238 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 239 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 240 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 241 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 242
 243 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 244
 245 #if defined(CONFIG_RAMBOOT_PBL)
 246 #define CONFIG_SYS_RAMBOOT
 247 #endif
 248
 249 /* Nand Flash */
 250 #ifdef CONFIG_NAND_FSL_ELBC
 251 #define CONFIG_SYS_NAND_BASE            0xffa00000
 252 #ifdef CONFIG_PHYS_64BIT
 253 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 254 #else
 255 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 256 #endif
 257
 258 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 259 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 260 #define CONFIG_CMD_NAND
 261 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 262
 263 /* NAND flash config */
 264 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 265                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 266                                | BR_PS_8               /* Port Size = 8 bit */ \
 267                                | BR_MS_FCM             /* MSEL = FCM */ \
 268                                | BR_V)                 /* valid */
 269 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 270                                | OR_FCM_PGS            /* Large Page*/ \
 271                                | OR_FCM_CSCT \
 272                                | OR_FCM_CST \
 273                                | OR_FCM_CHT \
 274                                | OR_FCM_SCY_1 \
 275                                | OR_FCM_TRLX \
 276                                | OR_FCM_EHTR)
 277
 278 #ifdef CONFIG_NAND
 279 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 280 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 281 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 282 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 283 #else
 284 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 285 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 286 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 287 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 288 #endif
 289 #else
 290 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 291 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 292 #endif /* CONFIG_NAND_FSL_ELBC */
 293
 294 #define CONFIG_SYS_FLASH_EMPTY_INFO
 295 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 296 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 297
 298 #define CONFIG_BOARD_EARLY_INIT_F
 299 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 300 #define CONFIG_MISC_INIT_R
 301
 302 #define CONFIG_HWCONFIG
 303
 304 /* define to use L1 as initial stack */
 305 #define CONFIG_L1_INIT_RAM
 306 #define CONFIG_SYS_INIT_RAM_LOCK
 307 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 308 #ifdef CONFIG_PHYS_64BIT
 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 311 /* The assembler doesn't like typecast */
 312 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 313         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 314           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 315 #else
 316 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 317 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 318 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 319 #endif
 320 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 321
 322 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 323 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 324
 325 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 326 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 327
 328 /* Serial Port - controlled on board with jumper J8
 329  * open - index 2
 330  * shorted - index 1
 331  */
 332 #define CONFIG_CONS_INDEX       1
 333 #define CONFIG_SYS_NS16550
 334 #define CONFIG_SYS_NS16550_SERIAL
 335 #define CONFIG_SYS_NS16550_REG_SIZE     1
 336 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 337
 338 #define CONFIG_SYS_BAUDRATE_TABLE       \
 339         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 340
 341 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 342 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 343 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 344 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 345
 346 /* Use the HUSH parser */
 347 #define CONFIG_SYS_HUSH_PARSER
 348
 349 /* pass open firmware flat tree */
 350 #define CONFIG_OF_LIBFDT
 351 #define CONFIG_OF_BOARD_SETUP
 352 #define CONFIG_OF_STDOUT_VIA_ALIAS
 353
 354 /* new uImage format support */
 355 #define CONFIG_FIT
 356 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 357
 358 /* I2C */
 359 #define CONFIG_SYS_I2C
 360 #define CONFIG_SYS_I2C_FSL
 361 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 362 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 363 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 364 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 365 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 366 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 367
 368 /*
 369  * RapidIO
 370  */
 371 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 372 #ifdef CONFIG_PHYS_64BIT
 373 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 374 #else
 375 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 376 #endif
 377 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 378
 379 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 380 #ifdef CONFIG_PHYS_64BIT
 381 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 382 #else
 383 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 384 #endif
 385 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 386
 387 /*
 388  * for slave u-boot IMAGE instored in master memory space,
 389  * PHYS must be aligned based on the SIZE
 390  */
 391 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 392 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 393 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 394 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 395 /*
 396  * for slave UCODE and ENV instored in master memory space,
 397  * PHYS must be aligned based on the SIZE
 398  */
 399 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 400 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 401 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 402
 403 /* slave core release by master*/
 404 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 405 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 406
 407 /*
 408  * SRIO_PCIE_BOOT - SLAVE
 409  */
 410 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 411 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 412 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 413                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 414 #endif
 415
 416 /*
 417  * eSPI - Enhanced SPI
 418  */
 419 #define CONFIG_FSL_ESPI
 420 #define CONFIG_SPI_FLASH_SPANSION
 421 #define CONFIG_CMD_SF
 422 #define CONFIG_SF_DEFAULT_SPEED         10000000
 423 #define CONFIG_SF_DEFAULT_MODE          0
 424
 425 /*
 426  * General PCI
 427  * Memory space is mapped 1-1, but I/O space must start from 0.
 428  */
 429
 430 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 431 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 432 #ifdef CONFIG_PHYS_64BIT
 433 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 434 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 435 #else
 436 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 437 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 438 #endif
 439 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 440 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 441 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 442 #ifdef CONFIG_PHYS_64BIT
 443 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 444 #else
 445 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 446 #endif
 447 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 448
 449 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 450 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 451 #ifdef CONFIG_PHYS_64BIT
 452 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 453 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 454 #else
 455 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 456 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 457 #endif
 458 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 459 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 460 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 461 #ifdef CONFIG_PHYS_64BIT
 462 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 463 #else
 464 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 465 #endif
 466 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 467
 468 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 469 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 470 #ifdef CONFIG_PHYS_64BIT
 471 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 472 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 473 #else
 474 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 475 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 476 #endif
 477 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 478 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 479 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 480 #ifdef CONFIG_PHYS_64BIT
 481 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 482 #else
 483 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 484 #endif
 485 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 486
 487 /* controller 4, Base address 203000 */
 488 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 489 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 490 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 491 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 492 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 493 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 494
 495 /* Qman/Bman */
 496 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 497 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 498 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 499 #ifdef CONFIG_PHYS_64BIT
 500 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 501 #else
 502 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 503 #endif
 504 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 505 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 506 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 507 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 508 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 509 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 510                                         CONFIG_SYS_BMAN_CENA_SIZE)
 511 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 512 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 513 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 514 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 515 #ifdef CONFIG_PHYS_64BIT
 516 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 517 #else
 518 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 519 #endif
 520 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 521 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 522 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 523 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 524 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 525 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 526                                         CONFIG_SYS_QMAN_CENA_SIZE)
 527 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 528 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 529
 530 #define CONFIG_SYS_DPAA_FMAN
 531 #define CONFIG_SYS_DPAA_PME
 532 /* Default address of microcode for the Linux Fman driver */
 533 #if defined(CONFIG_SPIFLASH)
 534 /*
 535  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 536  * env, so we got 0x110000.
 537  */
 538 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 539 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 540 #elif defined(CONFIG_SDCARD)
 541 /*
 542  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 543  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 544  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 545  */
 546 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 547 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 548 #elif defined(CONFIG_NAND)
 549 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 550 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 551 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 552 /*
 553  * Slave has no ucode locally, it can fetch this from remote. When implementing
 554  * in two corenet boards, slave's ucode could be stored in master's memory
 555  * space, the address can be mapped from slave TLB->slave LAW->
 556  * slave SRIO or PCIE outbound window->master inbound window->
 557  * master LAW->the ucode address in master's memory space.
 558  */
 559 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 560 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 561 #else
 562 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 563 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 564 #endif
 565 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 566 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 567
 568 #ifdef CONFIG_SYS_DPAA_FMAN
 569 #define CONFIG_FMAN_ENET
 570 #define CONFIG_PHYLIB_10G
 571 #define CONFIG_PHY_VITESSE
 572 #define CONFIG_PHY_TERANETICS
 573 #endif
 574
 575 #ifdef CONFIG_PCI
 576 #define CONFIG_PCI_INDIRECT_BRIDGE
 577 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 578
 579 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 580 #define CONFIG_DOS_PARTITION
 581 #endif  /* CONFIG_PCI */
 582
 583 /* SATA */
 584 #ifdef CONFIG_FSL_SATA_V2
 585 #define CONFIG_LIBATA
 586 #define CONFIG_FSL_SATA
 587
 588 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 589 #define CONFIG_SATA1
 590 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 591 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 592 #define CONFIG_SATA2
 593 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 594 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 595
 596 #define CONFIG_LBA48
 597 #define CONFIG_CMD_SATA
 598 #define CONFIG_DOS_PARTITION
 599 #define CONFIG_CMD_EXT2
 600 #endif
 601
 602 #ifdef CONFIG_FMAN_ENET
 603 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 604 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 605 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 606 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 607 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 608
 609 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 610 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 611 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 612 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 613 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 614
 615 #define CONFIG_SYS_TBIPA_VALUE  8
 616 #define CONFIG_MII              /* MII PHY management */
 617 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 618 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 619 #endif
 620
 621 /*
 622  * Environment
 623  */
 624 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 625 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 626
 627 /*
 628  * Command line configuration.
 629  */
 630 #define CONFIG_CMD_DHCP
 631 #define CONFIG_CMD_ELF
 632 #define CONFIG_CMD_ERRATA
 633 #define CONFIG_CMD_GREPENV
 634 #define CONFIG_CMD_IRQ
 635 #define CONFIG_CMD_I2C
 636 #define CONFIG_CMD_MII
 637 #define CONFIG_CMD_PING
 638 #define CONFIG_CMD_REGINFO
 639
 640 #ifdef CONFIG_PCI
 641 #define CONFIG_CMD_PCI
 642 #endif
 643
 644 /*
 645 * USB
 646 */
 647 #define CONFIG_HAS_FSL_DR_USB
 648 #define CONFIG_HAS_FSL_MPH_USB
 649
 650 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 651 #define CONFIG_CMD_USB
 652 #define CONFIG_USB_STORAGE
 653 #define CONFIG_USB_EHCI
 654 #define CONFIG_USB_EHCI_FSL
 655 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 656 #define CONFIG_CMD_EXT2
 657 #endif
 658
 659 #ifdef CONFIG_MMC
 660 #define CONFIG_FSL_ESDHC
 661 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 662 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 663 #define CONFIG_CMD_MMC
 664 #define CONFIG_GENERIC_MMC
 665 #define CONFIG_CMD_EXT2
 666 #define CONFIG_CMD_FAT
 667 #define CONFIG_DOS_PARTITION
 668 #endif
 669
 670 /* Hash command with SHA acceleration supported in hardware */
 671 #ifdef CONFIG_FSL_CAAM
 672 #define CONFIG_CMD_HASH
 673 #define CONFIG_SHA_HW_ACCEL
 674 #endif
 675
 676 /*
 677  * Miscellaneous configurable options
 678  */
 679 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 680 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 681 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 682 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 683 #ifdef CONFIG_CMD_KGDB
 684 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 685 #else
 686 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 687 #endif
 688 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 689 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 690 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 691
 692 /*
 693  * For booting Linux, the board info and command line data
 694  * have to be in the first 64 MB of memory, since this is
 695  * the maximum mapped by the Linux kernel during initialization.
 696  */
 697 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 698 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 699
 700 #ifdef CONFIG_CMD_KGDB
 701 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 702 #endif
 703
 704 /*
 705  * Environment Configuration
 706  */
 707 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 708 #define CONFIG_BOOTFILE         "uImage"
 709 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 710
 711 /* default location for tftp and bootm */
 712 #define CONFIG_LOADADDR         1000000
 713
 714 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 715
 716 #define CONFIG_BAUDRATE 115200
 717
 718 #ifdef CONFIG_P4080DS
 719 #define __USB_PHY_TYPE  ulpi
 720 #else
 721 #define __USB_PHY_TYPE  utmi
 722 #endif
 723
 724 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 725         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 726         "bank_intlv=cs0_cs1;"                                   \
 727         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 728         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 729         "netdev=eth0\0"                                         \
 730         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 731         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 732         "tftpflash=tftpboot $loadaddr $uboot && "               \
 733         "protect off $ubootaddr +$filesize && "                 \
 734         "erase $ubootaddr +$filesize && "                       \
 735         "cp.b $loadaddr $ubootaddr $filesize && "               \
 736         "protect on $ubootaddr +$filesize && "                  \
 737         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 738         "consoledev=ttyS0\0"                                    \
 739         "ramdiskaddr=2000000\0"                                 \
 740         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 741         "fdtaddr=c00000\0"                                      \
 742         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 743         "bdev=sda3\0"
 744
 745 #define CONFIG_HDBOOT                                   \
 746         "setenv bootargs root=/dev/$bdev rw "           \
 747         "console=$consoledev,$baudrate $othbootargs;"   \
 748         "tftp $loadaddr $bootfile;"                     \
 749         "tftp $fdtaddr $fdtfile;"                       \
 750         "bootm $loadaddr - $fdtaddr"
 751
 752 #define CONFIG_NFSBOOTCOMMAND                   \
 753         "setenv bootargs root=/dev/nfs rw "     \
 754         "nfsroot=$serverip:$rootpath "          \
 755         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 756         "console=$consoledev,$baudrate $othbootargs;"   \
 757         "tftp $loadaddr $bootfile;"             \
 758         "tftp $fdtaddr $fdtfile;"               \
 759         "bootm $loadaddr - $fdtaddr"
 760
 761 #define CONFIG_RAMBOOTCOMMAND                           \
 762         "setenv bootargs root=/dev/ram rw "             \
 763         "console=$consoledev,$baudrate $othbootargs;"   \
 764         "tftp $ramdiskaddr $ramdiskfile;"               \
 765         "tftp $loadaddr $bootfile;"                     \
 766         "tftp $fdtaddr $fdtfile;"                       \
 767         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 768
 769 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 770
 771 #include <asm/fsl_secure_boot.h>
 772
 773 #ifdef CONFIG_SECURE_BOOT
 774 #define CONFIG_CMD_BLOB
 775 #endif
 776
 777 #endif  /* __CONFIG_H */