include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_GENERIC_BOARD
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #include "../board/freescale/common/ics307_clk.h"
  17
  18 #ifdef CONFIG_RAMBOOT_PBL
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  22 #if defined(CONFIG_P3041DS)
  23 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  24 #elif defined(CONFIG_P4080DS)
  25 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  26 #elif defined(CONFIG_P5020DS)
  27 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  28 #elif defined(CONFIG_P5040DS)
  29 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  30 #endif
  31 #endif
  32
  33 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  34 /* Set 1M boot space */
  35 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  36 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  37                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  38 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  39 #define CONFIG_SYS_NO_FLASH
  40 #endif
  41
  42 /* High Level Configuration Options */
  43 #define CONFIG_BOOKE
  44 #define CONFIG_E500                     /* BOOKE e500 family */
  45 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  46 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  47 #define CONFIG_MP                       /* support multiple processors */
  48
  49 #ifndef CONFIG_SYS_TEXT_BASE
  50 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  51 #endif
  52
  53 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  54 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  55 #endif
  56
  57 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  58 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  59 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  60 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  61 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  62 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  63 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  64 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  65 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  66
  67 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  68
  69 #define CONFIG_ENV_OVERWRITE
  70
  71 #ifdef CONFIG_SYS_NO_FLASH
  72 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  73 #define CONFIG_ENV_IS_NOWHERE
  74 #endif
  75 #else
  76 #define CONFIG_FLASH_CFI_DRIVER
  77 #define CONFIG_SYS_FLASH_CFI
  78 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  79 #endif
  80
  81 #if defined(CONFIG_SPIFLASH)
  82 #define CONFIG_SYS_EXTRA_ENV_RELOC
  83 #define CONFIG_ENV_IS_IN_SPI_FLASH
  84 #define CONFIG_ENV_SPI_BUS              0
  85 #define CONFIG_ENV_SPI_CS               0
  86 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  87 #define CONFIG_ENV_SPI_MODE             0
  88 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  89 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  90 #define CONFIG_ENV_SECT_SIZE            0x10000
  91 #elif defined(CONFIG_SDCARD)
  92 #define CONFIG_SYS_EXTRA_ENV_RELOC
  93 #define CONFIG_ENV_IS_IN_MMC
  94 #define CONFIG_FSL_FIXED_MMC_LOCATION
  95 #define CONFIG_SYS_MMC_ENV_DEV          0
  96 #define CONFIG_ENV_SIZE                 0x2000
  97 #define CONFIG_ENV_OFFSET               (512 * 1658)
  98 #elif defined(CONFIG_NAND)
  99 #define CONFIG_SYS_EXTRA_ENV_RELOC
 100 #define CONFIG_ENV_IS_IN_NAND
 101 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 102 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 103 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 104 #define CONFIG_ENV_IS_IN_REMOTE
 105 #define CONFIG_ENV_ADDR         0xffe20000
 106 #define CONFIG_ENV_SIZE         0x2000
 107 #elif defined(CONFIG_ENV_IS_NOWHERE)
 108 #define CONFIG_ENV_SIZE         0x2000
 109 #else
 110 #define CONFIG_ENV_IS_IN_FLASH
 111 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 112 #define CONFIG_ENV_SIZE         0x2000
 113 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 114 #endif
 115
 116 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 117
 118 /*
 119  * These can be toggled for performance analysis, otherwise use default.
 120  */
 121 #define CONFIG_SYS_CACHE_STASHING
 122 #define CONFIG_BACKSIDE_L2_CACHE
 123 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 124 #define CONFIG_BTB                      /* toggle branch predition */
 125 #define CONFIG_DDR_ECC
 126 #ifdef CONFIG_DDR_ECC
 127 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 128 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 129 #endif
 130
 131 #define CONFIG_ENABLE_36BIT_PHYS
 132
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_ADDR_MAP
 135 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 136 #endif
 137
 138 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 139 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 140 #define CONFIG_SYS_MEMTEST_END          0x00400000
 141 #define CONFIG_SYS_ALT_MEMTEST
 142 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 143
 144 /*
 145  *  Config the L3 Cache as L3 SRAM
 146  */
 147 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 148 #ifdef CONFIG_PHYS_64BIT
 149 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 150 #else
 151 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 152 #endif
 153 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 154 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 155
 156 #ifdef CONFIG_PHYS_64BIT
 157 #define CONFIG_SYS_DCSRBAR              0xf0000000
 158 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 159 #endif
 160
 161 /* EEPROM */
 162 #define CONFIG_ID_EEPROM
 163 #define CONFIG_SYS_I2C_EEPROM_NXID
 164 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 165 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 166 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 167
 168 /*
 169  * DDR Setup
 170  */
 171 #define CONFIG_VERY_BIG_RAM
 172 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 173 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 174
 175 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 176 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 177
 178 #define CONFIG_DDR_SPD
 179 #define CONFIG_SYS_FSL_DDR3
 180
 181 #define CONFIG_SYS_SPD_BUS_NUM  1
 182 #define SPD_EEPROM_ADDRESS1     0x51
 183 #define SPD_EEPROM_ADDRESS2     0x52
 184 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 185 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 186
 187 /*
 188  * Local Bus Definitions
 189  */
 190
 191 /* Set the local bus clock 1/8 of platform clock */
 192 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 193
 194 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 195 #ifdef CONFIG_PHYS_64BIT
 196 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 197 #else
 198 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 199 #endif
 200
 201 #define CONFIG_SYS_FLASH_BR_PRELIM \
 202                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 203                  | BR_PS_16 | BR_V)
 204 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 205                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 206
 207 #define CONFIG_SYS_BR1_PRELIM \
 208         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 209 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 210
 211 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 214 #else
 215 #define PIXIS_BASE_PHYS         PIXIS_BASE
 216 #endif
 217
 218 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 219 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 220
 221 #define PIXIS_LBMAP_SWITCH      7
 222 #define PIXIS_LBMAP_MASK        0xf0
 223 #define PIXIS_LBMAP_SHIFT       4
 224 #define PIXIS_LBMAP_ALTBANK     0x40
 225
 226 #define CONFIG_SYS_FLASH_QUIET_TEST
 227 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 228
 229 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 230 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 231 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 232 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 233
 234 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 235
 236 #if defined(CONFIG_RAMBOOT_PBL)
 237 #define CONFIG_SYS_RAMBOOT
 238 #endif
 239
 240 /* Nand Flash */
 241 #ifdef CONFIG_NAND_FSL_ELBC
 242 #define CONFIG_SYS_NAND_BASE            0xffa00000
 243 #ifdef CONFIG_PHYS_64BIT
 244 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 245 #else
 246 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 247 #endif
 248
 249 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 250 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 251 #define CONFIG_MTD_NAND_VERIFY_WRITE
 252 #define CONFIG_CMD_NAND
 253 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 254
 255 /* NAND flash config */
 256 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 257                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 258                                | BR_PS_8               /* Port Size = 8 bit */ \
 259                                | BR_MS_FCM             /* MSEL = FCM */ \
 260                                | BR_V)                 /* valid */
 261 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 262                                | OR_FCM_PGS            /* Large Page*/ \
 263                                | OR_FCM_CSCT \
 264                                | OR_FCM_CST \
 265                                | OR_FCM_CHT \
 266                                | OR_FCM_SCY_1 \
 267                                | OR_FCM_TRLX \
 268                                | OR_FCM_EHTR)
 269
 270 #ifdef CONFIG_NAND
 271 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 272 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 273 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 274 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 275 #else
 276 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 277 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 278 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 279 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 280 #endif
 281 #else
 282 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 283 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 284 #endif /* CONFIG_NAND_FSL_ELBC */
 285
 286 #define CONFIG_SYS_FLASH_EMPTY_INFO
 287 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 288 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 289
 290 #define CONFIG_BOARD_EARLY_INIT_F
 291 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 292 #define CONFIG_MISC_INIT_R
 293
 294 #define CONFIG_HWCONFIG
 295
 296 /* define to use L1 as initial stack */
 297 #define CONFIG_L1_INIT_RAM
 298 #define CONFIG_SYS_INIT_RAM_LOCK
 299 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 300 #ifdef CONFIG_PHYS_64BIT
 301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 302 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 303 /* The assembler doesn't like typecast */
 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 305         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 306           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 307 #else
 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 311 #endif
 312 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 313
 314 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 315 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 316
 317 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 318 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 319
 320 /* Serial Port - controlled on board with jumper J8
 321  * open - index 2
 322  * shorted - index 1
 323  */
 324 #define CONFIG_CONS_INDEX       1
 325 #define CONFIG_SYS_NS16550
 326 #define CONFIG_SYS_NS16550_SERIAL
 327 #define CONFIG_SYS_NS16550_REG_SIZE     1
 328 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 329
 330 #define CONFIG_SYS_BAUDRATE_TABLE       \
 331         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 332
 333 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 334 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 335 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 336 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 337
 338 /* Use the HUSH parser */
 339 #define CONFIG_SYS_HUSH_PARSER
 340
 341 /* pass open firmware flat tree */
 342 #define CONFIG_OF_LIBFDT
 343 #define CONFIG_OF_BOARD_SETUP
 344 #define CONFIG_OF_STDOUT_VIA_ALIAS
 345
 346 /* new uImage format support */
 347 #define CONFIG_FIT
 348 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 349
 350 /* I2C */
 351 #define CONFIG_SYS_I2C
 352 #define CONFIG_SYS_I2C_FSL
 353 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 354 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 355 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 356 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 357 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 358 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 359
 360 /*
 361  * RapidIO
 362  */
 363 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 364 #ifdef CONFIG_PHYS_64BIT
 365 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 366 #else
 367 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 368 #endif
 369 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 370
 371 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 372 #ifdef CONFIG_PHYS_64BIT
 373 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 374 #else
 375 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 376 #endif
 377 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 378
 379 /*
 380  * for slave u-boot IMAGE instored in master memory space,
 381  * PHYS must be aligned based on the SIZE
 382  */
 383 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 384 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 385 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 386 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 387 /*
 388  * for slave UCODE and ENV instored in master memory space,
 389  * PHYS must be aligned based on the SIZE
 390  */
 391 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 392 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 393 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 394
 395 /* slave core release by master*/
 396 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 397 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 398
 399 /*
 400  * SRIO_PCIE_BOOT - SLAVE
 401  */
 402 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 403 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 404 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 405                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 406 #endif
 407
 408 /*
 409  * eSPI - Enhanced SPI
 410  */
 411 #define CONFIG_FSL_ESPI
 412 #define CONFIG_SPI_FLASH
 413 #define CONFIG_SPI_FLASH_SPANSION
 414 #define CONFIG_CMD_SF
 415 #define CONFIG_SF_DEFAULT_SPEED         10000000
 416 #define CONFIG_SF_DEFAULT_MODE          0
 417
 418 /*
 419  * General PCI
 420  * Memory space is mapped 1-1, but I/O space must start from 0.
 421  */
 422
 423 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 424 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 425 #ifdef CONFIG_PHYS_64BIT
 426 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 427 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 428 #else
 429 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 430 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 431 #endif
 432 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 433 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 434 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 435 #ifdef CONFIG_PHYS_64BIT
 436 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 437 #else
 438 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 439 #endif
 440 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 441
 442 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 443 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 444 #ifdef CONFIG_PHYS_64BIT
 445 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 446 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 447 #else
 448 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 449 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 450 #endif
 451 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 452 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 453 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 454 #ifdef CONFIG_PHYS_64BIT
 455 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 456 #else
 457 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 458 #endif
 459 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 460
 461 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 462 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 463 #ifdef CONFIG_PHYS_64BIT
 464 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 465 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 466 #else
 467 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 468 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 469 #endif
 470 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 471 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 472 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 473 #ifdef CONFIG_PHYS_64BIT
 474 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 475 #else
 476 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 477 #endif
 478 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 479
 480 /* controller 4, Base address 203000 */
 481 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 482 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 483 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 484 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 485 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 486 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 487
 488 /* Qman/Bman */
 489 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 490 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 491 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 492 #ifdef CONFIG_PHYS_64BIT
 493 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 494 #else
 495 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 496 #endif
 497 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 498 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 499 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 500 #ifdef CONFIG_PHYS_64BIT
 501 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 502 #else
 503 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 504 #endif
 505 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 506
 507 #define CONFIG_SYS_DPAA_FMAN
 508 #define CONFIG_SYS_DPAA_PME
 509 /* Default address of microcode for the Linux Fman driver */
 510 #if defined(CONFIG_SPIFLASH)
 511 /*
 512  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 513  * env, so we got 0x110000.
 514  */
 515 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 516 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 517 #elif defined(CONFIG_SDCARD)
 518 /*
 519  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 520  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 521  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 522  */
 523 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 524 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 525 #elif defined(CONFIG_NAND)
 526 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 527 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 528 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 529 /*
 530  * Slave has no ucode locally, it can fetch this from remote. When implementing
 531  * in two corenet boards, slave's ucode could be stored in master's memory
 532  * space, the address can be mapped from slave TLB->slave LAW->
 533  * slave SRIO or PCIE outbound window->master inbound window->
 534  * master LAW->the ucode address in master's memory space.
 535  */
 536 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 537 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 538 #else
 539 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 540 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 541 #endif
 542 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 543 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 544
 545 #ifdef CONFIG_SYS_DPAA_FMAN
 546 #define CONFIG_FMAN_ENET
 547 #define CONFIG_PHYLIB_10G
 548 #define CONFIG_PHY_VITESSE
 549 #define CONFIG_PHY_TERANETICS
 550 #endif
 551
 552 #ifdef CONFIG_PCI
 553 #define CONFIG_PCI_INDIRECT_BRIDGE
 554 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 555 #define CONFIG_E1000
 556
 557 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 558 #define CONFIG_DOS_PARTITION
 559 #endif  /* CONFIG_PCI */
 560
 561 /* SATA */
 562 #ifdef CONFIG_FSL_SATA_V2
 563 #define CONFIG_LIBATA
 564 #define CONFIG_FSL_SATA
 565
 566 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 567 #define CONFIG_SATA1
 568 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 569 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 570 #define CONFIG_SATA2
 571 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 572 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 573
 574 #define CONFIG_LBA48
 575 #define CONFIG_CMD_SATA
 576 #define CONFIG_DOS_PARTITION
 577 #define CONFIG_CMD_EXT2
 578 #endif
 579
 580 #ifdef CONFIG_FMAN_ENET
 581 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 582 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 583 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 584 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 585 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 586
 587 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 588 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 589 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 590 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 591 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 592
 593 #define CONFIG_SYS_TBIPA_VALUE  8
 594 #define CONFIG_MII              /* MII PHY management */
 595 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 596 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 597 #endif
 598
 599 /*
 600  * Environment
 601  */
 602 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 603 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 604
 605 /*
 606  * Command line configuration.
 607  */
 608 #include <config_cmd_default.h>
 609
 610 #define CONFIG_CMD_DHCP
 611 #define CONFIG_CMD_ELF
 612 #define CONFIG_CMD_ERRATA
 613 #define CONFIG_CMD_GREPENV
 614 #define CONFIG_CMD_IRQ
 615 #define CONFIG_CMD_I2C
 616 #define CONFIG_CMD_MII
 617 #define CONFIG_CMD_PING
 618 #define CONFIG_CMD_SETEXPR
 619 #define CONFIG_CMD_REGINFO
 620
 621 #ifdef CONFIG_PCI
 622 #define CONFIG_CMD_PCI
 623 #define CONFIG_CMD_NET
 624 #endif
 625
 626 /*
 627 * USB
 628 */
 629 #define CONFIG_HAS_FSL_DR_USB
 630 #define CONFIG_HAS_FSL_MPH_USB
 631
 632 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 633 #define CONFIG_CMD_USB
 634 #define CONFIG_USB_STORAGE
 635 #define CONFIG_USB_EHCI
 636 #define CONFIG_USB_EHCI_FSL
 637 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 638 #define CONFIG_CMD_EXT2
 639 #endif
 640
 641 #ifdef CONFIG_MMC
 642 #define CONFIG_FSL_ESDHC
 643 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 644 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 645 #define CONFIG_CMD_MMC
 646 #define CONFIG_GENERIC_MMC
 647 #define CONFIG_CMD_EXT2
 648 #define CONFIG_CMD_FAT
 649 #define CONFIG_DOS_PARTITION
 650 #endif
 651
 652 /* Hash command with SHA acceleration supported in hardware */
 653 #ifdef CONFIG_FSL_CAAM
 654 #define CONFIG_CMD_HASH
 655 #define CONFIG_SHA_HW_ACCEL
 656 #endif
 657
 658 /*
 659  * Miscellaneous configurable options
 660  */
 661 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 662 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 663 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 664 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 665 #ifdef CONFIG_CMD_KGDB
 666 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 667 #else
 668 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 669 #endif
 670 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 671 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 672 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 673
 674 /*
 675  * For booting Linux, the board info and command line data
 676  * have to be in the first 64 MB of memory, since this is
 677  * the maximum mapped by the Linux kernel during initialization.
 678  */
 679 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 680 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 681
 682 #ifdef CONFIG_CMD_KGDB
 683 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 684 #endif
 685
 686 /*
 687  * Environment Configuration
 688  */
 689 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 690 #define CONFIG_BOOTFILE         "uImage"
 691 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 692
 693 /* default location for tftp and bootm */
 694 #define CONFIG_LOADADDR         1000000
 695
 696 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 697
 698 #define CONFIG_BAUDRATE 115200
 699
 700 #ifdef CONFIG_P4080DS
 701 #define __USB_PHY_TYPE  ulpi
 702 #else
 703 #define __USB_PHY_TYPE  utmi
 704 #endif
 705
 706 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 707         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 708         "bank_intlv=cs0_cs1;"                                   \
 709         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 710         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 711         "netdev=eth0\0"                                         \
 712         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 713         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 714         "tftpflash=tftpboot $loadaddr $uboot && "               \
 715         "protect off $ubootaddr +$filesize && "                 \
 716         "erase $ubootaddr +$filesize && "                       \
 717         "cp.b $loadaddr $ubootaddr $filesize && "               \
 718         "protect on $ubootaddr +$filesize && "                  \
 719         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 720         "consoledev=ttyS0\0"                                    \
 721         "ramdiskaddr=2000000\0"                                 \
 722         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 723         "fdtaddr=c00000\0"                                      \
 724         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 725         "bdev=sda3\0"
 726
 727 #define CONFIG_HDBOOT                                   \
 728         "setenv bootargs root=/dev/$bdev rw "           \
 729         "console=$consoledev,$baudrate $othbootargs;"   \
 730         "tftp $loadaddr $bootfile;"                     \
 731         "tftp $fdtaddr $fdtfile;"                       \
 732         "bootm $loadaddr - $fdtaddr"
 733
 734 #define CONFIG_NFSBOOTCOMMAND                   \
 735         "setenv bootargs root=/dev/nfs rw "     \
 736         "nfsroot=$serverip:$rootpath "          \
 737         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 738         "console=$consoledev,$baudrate $othbootargs;"   \
 739         "tftp $loadaddr $bootfile;"             \
 740         "tftp $fdtaddr $fdtfile;"               \
 741         "bootm $loadaddr - $fdtaddr"
 742
 743 #define CONFIG_RAMBOOTCOMMAND                           \
 744         "setenv bootargs root=/dev/ram rw "             \
 745         "console=$consoledev,$baudrate $othbootargs;"   \
 746         "tftp $ramdiskaddr $ramdiskfile;"               \
 747         "tftp $loadaddr $bootfile;"                     \
 748         "tftp $fdtaddr $fdtfile;"                       \
 749         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 750
 751 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 752
 753 #include <asm/fsl_secure_boot.h>
 754
 755 #endif  /* __CONFIG_H */