2 * Copyright 2009-2010 Freescale Semiconductor, Inc.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * Corenet DS style board configuration file
29 #include "../board/freescale/common/ics307_clk.h"
31 /* High Level Configuration Options */
33 #define CONFIG_E500 /* BOOKE e500 family */
34 #define CONFIG_E500MC /* BOOKE e500mc family */
35 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
36 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */
37 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
38 #define CONFIG_MP /* support multiple processors */
40 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
41 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
42 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
43 #define CONFIG_PCI /* Enable PCI/PCIE */
44 #define CONFIG_PCIE1 /* PCIE controler 1 */
45 #define CONFIG_PCIE2 /* PCIE controler 2 */
46 #define CONFIG_PCIE3 /* PCIE controler 3 */
47 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
48 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
49 #define CONFIG_SYS_HAS_SERDES /* has SERDES */
51 #define CONFIG_SRIO1 /* SRIO port 1 */
52 #define CONFIG_SRIO2 /* SRIO port 2 */
54 #define CONFIG_FSL_LAW /* Use common FSL init code */
56 #define CONFIG_ENV_OVERWRITE
58 #ifdef CONFIG_SYS_NO_FLASH
59 #define CONFIG_ENV_IS_NOWHERE
61 #define CONFIG_ENV_IS_IN_FLASH
62 #define CONFIG_FLASH_CFI_DRIVER
63 #define CONFIG_SYS_FLASH_CFI
66 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */
67 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
70 * These can be toggled for performance analysis, otherwise use default.
72 #define CONFIG_SYS_CACHE_STASHING
73 #define CONFIG_BACKSIDE_L2_CACHE
74 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
75 #define CONFIG_BTB /* toggle branch predition */
76 /*#define CONFIG_DDR_ECC*/
78 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
79 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef
82 #define CONFIG_ENABLE_36BIT_PHYS
84 #ifdef CONFIG_PHYS_64BIT
85 #define CONFIG_ADDR_MAP
86 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
89 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
90 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
91 #define CONFIG_SYS_MEMTEST_END 0x00400000
92 #define CONFIG_SYS_ALT_MEMTEST
93 #define CONFIG_PANIC_HANG /* do not reset board on panic */
96 * Base addresses -- Note these are effective addresses where the
97 * actual resources get mapped (not physical addresses)
99 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 /* CCSRBAR Default */
100 #define CONFIG_SYS_CCSRBAR 0xfe000000 /* relocated CCSRBAR */
101 #ifdef CONFIG_PHYS_64BIT
102 #define CONFIG_SYS_CCSRBAR_PHYS 0xffe000000ull /* physical addr of CCSRBAR */
104 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
106 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
108 #ifdef CONFIG_PHYS_64BIT
109 #define CONFIG_SYS_DCSRBAR 0xf0000000
110 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
114 #define CONFIG_ID_EEPROM
115 #define CONFIG_SYS_I2C_EEPROM_NXID
116 #define CONFIG_SYS_EEPROM_BUS_NUM 0
117 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
118 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
123 #define CONFIG_VERY_BIG_RAM
124 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
125 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
127 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
128 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
130 #define CONFIG_DDR_SPD
131 #define CONFIG_FSL_DDR3
133 #define CONFIG_SYS_SPD_BUS_NUM 1
134 #define SPD_EEPROM_ADDRESS1 0x51
135 #define SPD_EEPROM_ADDRESS2 0x52
136 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
139 * Local Bus Definitions
142 /* Set the local bus clock 1/8 of platform clock */
143 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
145 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */
146 #ifdef CONFIG_PHYS_64BIT
147 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
149 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
152 #define CONFIG_SYS_BR0_PRELIM \
153 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
155 #define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
156 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
158 #define CONFIG_SYS_BR1_PRELIM \
159 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
160 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7
162 #define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
163 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
164 #ifdef CONFIG_PHYS_64BIT
165 #define PIXIS_BASE_PHYS 0xfffdf0000ull
167 #define PIXIS_BASE_PHYS PIXIS_BASE
170 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
171 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
173 #define PIXIS_LBMAP_SWITCH 7
174 #define PIXIS_LBMAP_MASK 0xf0
175 #define PIXIS_LBMAP_SHIFT 4
176 #define PIXIS_LBMAP_ALTBANK 0x40
178 #define CONFIG_SYS_FLASH_QUIET_TEST
179 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
181 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
182 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
183 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
184 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
186 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
188 #define CONFIG_SYS_FLASH_EMPTY_INFO
189 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
190 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
192 #define CONFIG_BOARD_EARLY_INIT_F
193 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
194 #define CONFIG_MISC_INIT_R
196 #define CONFIG_HWCONFIG
198 /* define to use L1 as initial stack */
199 #define CONFIG_L1_INIT_RAM
200 #define CONFIG_SYS_INIT_RAM_LOCK
201 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
202 #ifdef CONFIG_PHYS_64BIT
203 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
204 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
205 /* The assembler doesn't like typecast */
206 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
207 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
208 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
210 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
211 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
212 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
214 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
216 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
217 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
219 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
220 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
222 /* Serial Port - controlled on board with jumper J8
226 #define CONFIG_CONS_INDEX 1
227 #define CONFIG_SYS_NS16550
228 #define CONFIG_SYS_NS16550_SERIAL
229 #define CONFIG_SYS_NS16550_REG_SIZE 1
230 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
232 #define CONFIG_SYS_BAUDRATE_TABLE \
233 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
235 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
236 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
237 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
238 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
240 /* Use the HUSH parser */
241 #define CONFIG_SYS_HUSH_PARSER
242 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
244 /* pass open firmware flat tree */
245 #define CONFIG_OF_LIBFDT
246 #define CONFIG_OF_BOARD_SETUP
247 #define CONFIG_OF_STDOUT_VIA_ALIAS
249 /* new uImage format support */
251 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
254 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */
255 #define CONFIG_HARD_I2C /* I2C with hardware support */
256 #define CONFIG_I2C_MULTI_BUS
257 #define CONFIG_I2C_CMD_TREE
258 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
259 #define CONFIG_SYS_I2C_SLAVE 0x7F
260 #define CONFIG_SYS_I2C_OFFSET 0x118000
261 #define CONFIG_SYS_I2C2_OFFSET 0x118100
266 #define CONFIG_SYS_RIO1_MEM_VIRT 0xa0000000
267 #ifdef CONFIG_PHYS_64BIT
268 #define CONFIG_SYS_RIO1_MEM_PHYS 0xc20000000ull
270 #define CONFIG_SYS_RIO1_MEM_PHYS 0xa0000000
272 #define CONFIG_SYS_RIO1_MEM_SIZE 0x10000000 /* 256M */
274 #define CONFIG_SYS_RIO2_MEM_VIRT 0xb0000000
275 #ifdef CONFIG_PHYS_64BIT
276 #define CONFIG_SYS_RIO2_MEM_PHYS 0xc30000000ull
278 #define CONFIG_SYS_RIO2_MEM_PHYS 0xb0000000
280 #define CONFIG_SYS_RIO2_MEM_SIZE 0x10000000 /* 256M */
284 * Memory space is mapped 1-1, but I/O space must start from 0.
287 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
288 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
289 #ifdef CONFIG_PHYS_64BIT
290 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
291 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
293 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
294 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
296 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
297 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
298 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
299 #ifdef CONFIG_PHYS_64BIT
300 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
302 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
304 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
306 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
307 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
308 #ifdef CONFIG_PHYS_64BIT
309 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
310 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
312 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
313 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
315 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
316 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
317 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
318 #ifdef CONFIG_PHYS_64BIT
319 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
321 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
323 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
325 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
326 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xe0000000
327 #ifdef CONFIG_PHYS_64BIT
328 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
329 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
331 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
332 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
334 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
335 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
336 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
337 #ifdef CONFIG_PHYS_64BIT
338 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
340 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
342 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
344 /* controller 4, Base address 203000 */
345 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
346 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
347 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
348 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
349 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
350 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
353 #define CONFIG_SYS_BMAN_NUM_PORTALS 10
354 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
355 #ifdef CONFIG_PHYS_64BIT
356 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
358 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
360 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
361 #define CONFIG_SYS_QMAN_NUM_PORTALS 10
362 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
363 #ifdef CONFIG_PHYS_64BIT
364 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
366 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
368 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
370 #define CONFIG_SYS_DPAA_FMAN
371 #define CONFIG_SYS_DPAA_PME
372 /* Default address of microcode for the Linux Fman driver */
373 #define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000
374 #ifdef CONFIG_PHYS_64BIT
375 #define CONFIG_SYS_FMAN_FW_ADDR_PHYS 0xFEF000000ULL
377 #define CONFIG_SYS_FMAN_FW_ADDR_PHYS CONFIG_SYS_FMAN_FW_ADDR
380 #ifdef CONFIG_SYS_DPAA_FMAN
381 #define CONFIG_FMAN_ENET
386 /*PCIE video card used*/
387 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT
393 #define CONFIG_BIOSEMU
394 #define CONFIG_CFB_CONSOLE
395 #define CONFIG_VIDEO_SW_CURSOR
396 #define CONFIG_VGA_AS_SINGLE_DEVICE
397 #define CONFIG_ATI_RADEON_FB
398 #define CONFIG_VIDEO_LOGO
399 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
402 #define CONFIG_NET_MULTI
403 #define CONFIG_PCI_PNP /* do pci plug-and-play */
406 #ifndef CONFIG_PCI_PNP
407 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS
408 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS
409 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */
412 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
413 #define CONFIG_DOS_PARTITION
414 #endif /* CONFIG_PCI */
417 #ifdef CONFIG_FSL_SATA_V2
418 #define CONFIG_LIBATA
419 #define CONFIG_FSL_SATA
421 #define CONFIG_SYS_SATA_MAX_DEVICE 2
423 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
424 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
426 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
427 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
430 #define CONFIG_CMD_SATA
431 #define CONFIG_DOS_PARTITION
432 #define CONFIG_CMD_EXT2
435 #ifdef CONFIG_FMAN_ENET
436 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c
437 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d
438 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e
439 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f
440 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
442 #if (CONFIG_SYS_NUM_FMAN == 2)
443 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c
444 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d
445 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e
446 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f
447 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0
450 #define CONFIG_SYS_TBIPA_VALUE 8
451 #define CONFIG_MII /* MII PHY management */
452 #define CONFIG_ETHPRIME "FM1@DTSEC1"
453 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
459 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
460 #define CONFIG_ENV_SIZE 0x2000
461 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
463 #define CONFIG_LOADS_ECHO /* echo on for serial download */
464 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
467 * Command line configuration.
469 #include <config_cmd_default.h>
471 #define CONFIG_CMD_ELF
472 #define CONFIG_CMD_ERRATA
473 #define CONFIG_CMD_IRQ
474 #define CONFIG_CMD_I2C
475 #define CONFIG_CMD_MII
476 #define CONFIG_CMD_PING
477 #define CONFIG_CMD_SETEXPR
480 #define CONFIG_CMD_PCI
481 #define CONFIG_CMD_NET
487 #define CONFIG_CMD_USB
488 #define CONFIG_USB_STORAGE
489 #define CONFIG_USB_EHCI
490 #define CONFIG_USB_EHCI_FSL
491 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
492 #define CONFIG_CMD_EXT2
497 #define CONFIG_FSL_ESDHC
498 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
499 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
500 #define CONFIG_CMD_MMC
501 #define CONFIG_GENERIC_MMC
502 #define CONFIG_CMD_EXT2
503 #define CONFIG_CMD_FAT
504 #define CONFIG_DOS_PARTITION
508 * Miscellaneous configurable options
510 #define CONFIG_SYS_LONGHELP /* undef to save memory */
511 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
512 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
513 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
514 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
515 #ifdef CONFIG_CMD_KGDB
516 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
518 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
520 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
521 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
522 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
523 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
526 * For booting Linux, the board info and command line data
527 * have to be in the first 16 MB of memory, since this is
528 * the maximum mapped by the Linux kernel during initialization.
530 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
532 #ifdef CONFIG_CMD_KGDB
533 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
534 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
538 * Environment Configuration
540 #define CONFIG_ROOTPATH /opt/nfsroot
541 #define CONFIG_BOOTFILE uImage
542 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
544 /* default location for tftp and bootm */
545 #define CONFIG_LOADADDR 1000000
547 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
549 #define CONFIG_BAUDRATE 115200
551 #define CONFIG_EXTRA_ENV_SETTINGS \
552 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
553 "bank_intlv=cs0_cs1\0" \
555 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
556 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \
557 "tftpflash=tftpboot $loadaddr $uboot && " \
558 "protect off $ubootaddr +$filesize && " \
559 "erase $ubootaddr +$filesize && " \
560 "cp.b $loadaddr $ubootaddr $filesize && " \
561 "protect on $ubootaddr +$filesize && " \
562 "cmp.b $loadaddr $ubootaddr $filesize\0" \
563 "consoledev=ttyS0\0" \
564 "ramdiskaddr=2000000\0" \
565 "ramdiskfile=p4080ds/ramdisk.uboot\0" \
567 "fdtfile=p4080ds/p4080ds.dtb\0" \
570 "fman_ucode="MK_STR(CONFIG_SYS_FMAN_FW_ADDR_PHYS)"\0"
572 #define CONFIG_HDBOOT \
573 "setenv bootargs root=/dev/$bdev rw " \
574 "console=$consoledev,$baudrate $othbootargs;" \
575 "tftp $loadaddr $bootfile;" \
576 "tftp $fdtaddr $fdtfile;" \
577 "bootm $loadaddr - $fdtaddr"
579 #define CONFIG_NFSBOOTCOMMAND \
580 "setenv bootargs root=/dev/nfs rw " \
581 "nfsroot=$serverip:$rootpath " \
582 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
583 "console=$consoledev,$baudrate $othbootargs;" \
584 "tftp $loadaddr $bootfile;" \
585 "tftp $fdtaddr $fdtfile;" \
586 "bootm $loadaddr - $fdtaddr"
588 #define CONFIG_RAMBOOTCOMMAND \
589 "setenv bootargs root=/dev/ram rw " \
590 "console=$consoledev,$baudrate $othbootargs;" \
591 "tftp $ramdiskaddr $ramdiskfile;" \
592 "tftp $loadaddr $bootfile;" \
593 "tftp $fdtaddr $fdtfile;" \
594 "bootm $loadaddr $ramdiskaddr $fdtaddr"
596 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
598 #endif /* __CONFIG_H */