2 * Copyright 2015 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 module.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/imx-regs.h>
18 #define CONFIG_SYS_THUMB_BUILD
19 #define CONFIG_USE_ARCH_MEMCPY
20 #define CONFIG_USE_ARCH_MEMSET
21 #define CONFIG_SYS_FSL_CLK
23 #define CONFIG_ARCH_MISC_INIT
24 #define CONFIG_DISPLAY_BOARDINFO
26 #define CONFIG_SKIP_LOWLEVEL_INIT
28 #define CONFIG_CMD_FUSE
29 #ifdef CONFIG_CMD_FUSE
30 #define CONFIG_MXC_OCOTP
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
36 #define CONFIG_BOARD_EARLY_INIT_F
38 /* Allow to overwrite serial and ethaddr */
39 #define CONFIG_ENV_OVERWRITE
40 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
41 #define CONFIG_BAUDRATE 115200
44 #define CONFIG_CMD_NAND
45 #define CONFIG_SYS_NAND_ONFI_DETECTION
46 #define CONFIG_SYS_MAX_NAND_DEVICE 1
47 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
49 /* Dynamic MTD partition support */
50 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
51 #define CONFIG_MTD_PARTITIONS
52 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
53 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
54 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
61 #define CONFIG_FSL_ESDHC
62 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
63 #define CONFIG_SYS_FSL_ESDHC_NUM 1
65 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
67 #define CONFIG_GENERIC_MMC
68 #define CONFIG_DOS_PARTITION
72 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
74 #define CONFIG_FEC_MXC
76 #define IMX_FEC_BASE ENET1_BASE_ADDR
77 #define CONFIG_FEC_XCV_TYPE RMII
78 #define CONFIG_FEC_MXC_PHYADDR 0
80 #define CONFIG_PHY_MICREL
82 #define CONFIG_IPADDR 192.168.10.2
83 #define CONFIG_NETMASK 255.255.255.0
84 #define CONFIG_SERVERIP 192.168.10.1
86 #define CONFIG_BOARD_LATE_INIT
88 #define CONFIG_LOADADDR 0x80008000
89 #define CONFIG_FDTADDR 0x84000000
91 /* We boot from the gfxRAM area of the OCRAM. */
92 #define CONFIG_SYS_TEXT_BASE 0x3f408000
93 #define CONFIG_BOARD_SIZE_LIMIT 524288
96 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
97 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
98 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
99 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
100 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
101 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
103 #define NFS_BOOTCMD \
104 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
105 "nfsboot=run setup; " \
106 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
107 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
108 "dhcp ${kernel_addr_r} && " \
109 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
110 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
112 #define UBI_BOOTCMD \
113 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
114 "ubi.fm_autoconvert=1\0" \
115 "ubiboot=run setup; " \
116 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
117 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
118 "ubi part ubi && ubifsmount ubi0:rootfs && " \
119 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
120 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
121 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
123 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
125 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
127 #define CONFIG_EXTRA_ENV_SETTINGS \
128 "kernel_addr_r=0x82000000\0" \
129 "fdt_addr_r=0x84000000\0" \
130 "kernel_file=zImage\0" \
131 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
132 "fdt_board=eval-v3\0" \
135 "setup=setenv setupargs " \
136 "console=tty1 console=${console}" \
137 ",${baudrate}n8 ${memargs}\0" \
138 "setsdupdate=mmc rescan && set interface mmc && " \
139 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
140 "source ${loadaddr}\0" \
141 "setusbupdate=usb start && set interface usb && " \
142 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
143 "source ${loadaddr}\0" \
144 "setupdate=run setsdupdate || run setusbupdate\0" \
145 "mtdparts=" MTDPARTS_DEFAULT "\0" \
146 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
151 /* Miscellaneous configurable options */
152 #define CONFIG_SYS_LONGHELP /* undef to save memory */
153 #undef CONFIG_AUTO_COMPLETE
154 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
155 #define CONFIG_SYS_PBSIZE \
156 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
157 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
158 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
160 #define CONFIG_SYS_MEMTEST_START 0x80010000
161 #define CONFIG_SYS_MEMTEST_END 0x87C00000
163 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
164 #define CONFIG_SYS_HZ 1000
165 #define CONFIG_CMDLINE_EDITING
169 * The stack sizes are set up in start.S using the settings below
171 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
173 /* Physical memory map */
174 #define CONFIG_NR_DRAM_BANKS 1
175 #define PHYS_SDRAM (0x80000000)
176 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
178 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
179 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
180 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
182 #define CONFIG_SYS_INIT_SP_OFFSET \
183 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
184 #define CONFIG_SYS_INIT_SP_ADDR \
185 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
187 /* Environment organization */
188 #define CONFIG_SYS_NO_FLASH
190 #ifdef CONFIG_ENV_IS_IN_MMC
191 #define CONFIG_SYS_MMC_ENV_DEV 0
192 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
193 #define CONFIG_ENV_SIZE (8 * 1024)
196 #ifdef CONFIG_ENV_IS_IN_NAND
197 #define CONFIG_ENV_SIZE (64 * 2048)
198 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
199 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
202 #define CONFIG_SYS_NO_FLASH
204 /* USB Host Support */
205 #define CONFIG_USB_EHCI
206 #define CONFIG_USB_EHCI_VF
207 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
208 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
210 /* USB Client Support */
211 #define CONFIG_TRDX_VID 0x1B67
212 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
213 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
214 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
215 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
218 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
221 #define CONFIG_USB_FUNCTION_MASS_STORAGE
223 #endif /* __CONFIG_H */