include/configs/colibri_vf.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2015-2016 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex VF50/VF61 modules.
   6  *
   7  * Based on vf610twr.h:
   8  * Copyright 2013 Freescale Semiconductor, Inc.
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <asm/arch/imx-regs.h>
  15
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_SKIP_LOWLEVEL_INIT
  19
  20 #ifdef CONFIG_CMD_FUSE
  21 #define CONFIG_MXC_OCOTP
  22 #endif
  23
  24 #ifdef CONFIG_VIDEO_FSL_DCU_FB
  25 #define CONFIG_SPLASH_SCREEN_ALIGN
  26 #define CONFIG_VIDEO_LOGO
  27 #define CONFIG_VIDEO_BMP_LOGO
  28 #define CONFIG_SYS_FSL_DCU_LE
  29
  30 #define CONFIG_SYS_DCU_ADDR             DCU0_BASE_ADDR
  31 #define DCU_LAYER_MAX_NUM               64
  32 #endif
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  36
  37 /* Allow to overwrite serial and ethaddr */
  38 #define CONFIG_ENV_OVERWRITE
  39
  40 /* NAND support */
  41 #define CONFIG_SYS_NAND_ONFI_DETECTION
  42 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  43 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  44
  45 /* Dynamic MTD partition support */
  46
  47 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  48 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  49
  50 #define CONFIG_FEC_MXC
  51 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  52 #define CONFIG_FEC_XCV_TYPE             RMII
  53 #define CONFIG_FEC_MXC_PHYADDR          0
  54
  55 #define CONFIG_IPADDR           192.168.10.2
  56 #define CONFIG_NETMASK          255.255.255.0
  57 #define CONFIG_SERVERIP         192.168.10.1
  58
  59 #define CONFIG_LOADADDR                 0x80008000
  60 #define CONFIG_FDTADDR                  0x84000000
  61
  62 /* We boot from the gfxRAM area of the OCRAM. */
  63 #define CONFIG_BOARD_SIZE_LIMIT         520192
  64
  65 #define SD_BOOTCMD \
  66         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  67         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  68         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  69         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
  70         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
  71         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  72
  73 #define NFS_BOOTCMD \
  74         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  75         "nfsboot=run setup; " \
  76         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
  77         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  78         "dhcp ${kernel_addr_r} && "     \
  79         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  80         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  81
  82 #define UBI_BOOTCMD     \
  83         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
  84         "ubi.fm_autoconvert=1\0" \
  85         "ubiboot=run setup; " \
  86         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
  87         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
  88         "ubi part ubi && " \
  89         "ubi read ${kernel_addr_r} kernel && " \
  90         "ubi read ${fdt_addr_r} dtb && " \
  91         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  92
  93 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
  94
  95 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
  96
  97 #define CONFIG_EXTRA_ENV_SETTINGS \
  98         "kernel_addr_r=0x82000000\0" \
  99         "fdt_addr_r=0x84000000\0" \
 100         "kernel_file=zImage\0" \
 101         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 102         "fdt_board=eval-v3\0" \
 103         "fdt_fixup=;\0" \
 104         "defargs=\0" \
 105         "console=ttyLP0\0" \
 106         "setup=setenv setupargs " \
 107         "console=tty1 console=${console}" \
 108         ",${baudrate}n8 ${memargs}\0" \
 109         "setsdupdate=mmc rescan && set interface mmc && " \
 110         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 111         "source ${loadaddr}\0" \
 112         "setusbupdate=usb start && set interface usb && " \
 113         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 114         "source ${loadaddr}\0" \
 115         "setupdate=run setsdupdate || run setusbupdate\0" \
 116         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 117         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 118         "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \
 119         "splashpos=m,m\0" \
 120         SD_BOOTCMD \
 121         NFS_BOOTCMD \
 122         UBI_BOOTCMD
 123
 124 /* Miscellaneous configurable options */
 125 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 126 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 127
 128 #define CONFIG_SYS_MEMTEST_START        0x80010000
 129 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 130
 131 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 132 #define CONFIG_SYS_HZ                   1000
 133
 134 /* Physical memory map */
 135 #define PHYS_SDRAM                      (0x80000000)
 136 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 137
 138 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 139 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 140 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 141
 142 #define CONFIG_SYS_INIT_SP_OFFSET \
 143         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 144 #define CONFIG_SYS_INIT_SP_ADDR \
 145         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 146
 147 /* Environment organization */
 148
 149 #ifdef CONFIG_ENV_IS_IN_MMC
 150 #define CONFIG_SYS_MMC_ENV_DEV          0
 151 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 152 #define CONFIG_ENV_SIZE                 (8 * 1024)
 153 #endif
 154
 155 #ifdef CONFIG_ENV_IS_IN_NAND
 156 #define CONFIG_ENV_SIZE                 (64 * 2048)
 157 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 158 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 159 #endif
 160
 161 /* USB Host Support */
 162 #define CONFIG_USB_EHCI_VF
 163 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 164 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 165
 166 /* USB DFU */
 167 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 168
 169 /* USB Storage */
 170
 171 #endif /* __CONFIG_H */