ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / colibri-imx6ull.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2018 Toradex AG
4  *
5  * Configuration settings for the Colibri iMX6ULL module.
6  *
7  * based on colibri_imx7.h
8  */
9
10 #ifndef __COLIBRI_IMX6ULL_CONFIG_H
11 #define __COLIBRI_IMX6ULL_CONFIG_H
12
13 #include "mx6_common.h"
14 #define CONFIG_IOMUX_LPSR
15
16 /* #define CONFIG_DBG_MONITOR*/
17 #define PHYS_SDRAM_SIZE                 SZ_512M
18
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
21
22 /* Network */
23 #define CONFIG_FEC_XCV_TYPE             RMII
24 #define CONFIG_ETHPRIME                 "FEC"
25 #define CONFIG_FEC_MXC_PHYADDR          0
26
27 #define CONFIG_IP_DEFRAG
28 #define CONFIG_TFTP_BLOCKSIZE           16352
29 #define CONFIG_TFTP_TSIZE
30
31 /* ENET1 */
32 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
33
34 /* MMC Config*/
35 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
36 #define CONFIG_SYS_FSL_USDHC_NUM        1
37
38 #undef CONFIG_BOOTM_PLAN9
39 #undef CONFIG_BOOTM_RTEMS
40
41 /* I2C configs */
42 #define CONFIG_SYS_I2C_SPEED            100000
43
44 #define CONFIG_IPADDR                   192.168.10.2
45 #define CONFIG_NETMASK                  255.255.255.0
46 #define CONFIG_SERVERIP                 192.168.10.1
47
48 #define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
49
50 #define MEM_LAYOUT_ENV_SETTINGS \
51         "bootm_size=0x10000000\0" \
52         "fdt_addr_r=0x82000000\0" \
53         "fdt_high=0xffffffff\0" \
54         "initrd_high=0xffffffff\0" \
55         "kernel_addr_r=0x81000000\0" \
56         "pxefile_addr_r=0x87100000\0" \
57         "ramdisk_addr_r=0x82100000\0" \
58         "scriptaddr=0x87000000\0"
59
60 #define NFS_BOOTCMD \
61         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
62         "nfsboot=run setup; " \
63                 "setenv bootargs ${defargs} ${nfsargs} " \
64                 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
65                 "dhcp ${kernel_addr_r} && " \
66                 "tftp ${fdt_addr_r} " FDT_FILE " && " \
67                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
68
69 #define SD_BOOTCMD \
70         "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
71         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
72         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
73         "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
74         "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
75         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
76
77 #define UBI_BOOTCMD \
78         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
79                 "ubi.fm_autoconvert=1\0" \
80         "ubiboot=run setup; " \
81                 "setenv bootargs ${defargs} ${ubiargs} " \
82                 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
83                 "ubi part ubi &&" \
84                 "ubi read ${kernel_addr_r} kernel && " \
85                 "ubi read ${fdt_addr_r} dtb && " \
86                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
87
88 #define CONFIG_BOOTCOMMAND "run ubiboot; " \
89         "setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
90
91 #define BOOT_TARGET_DEVICES(func) \
92         func(MMC, mmc, 0) \
93         func(USB, usb, 0) \
94         func(DHCP, dhcp, na)
95 #include <config_distro_bootcmd.h>
96
97 #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
98
99 #define CONFIG_EXTRA_ENV_SETTINGS \
100         BOOTENV \
101         MEM_LAYOUT_ENV_SETTINGS \
102         NFS_BOOTCMD \
103         SD_BOOTCMD \
104         UBI_BOOTCMD \
105         "console=ttymxc0\0" \
106         "defargs=user_debug=30\0" \
107         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
108         "fdt_board=eval-v3\0" \
109         "fdt_fixup=;\0" \
110         "ip_dyn=yes\0" \
111         "kernel_file=zImage\0" \
112         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
113         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
114                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
115                 "${board}/flash_eth.img && source ${loadaddr}\0" \
116         "setsdupdate=mmc rescan && setenv interface mmc && " \
117                 "fatload ${interface} 0:1 ${loadaddr} " \
118                 "${board}/flash_blk.img && source ${loadaddr}\0" \
119         "setup=setenv setupargs " \
120                 "console=tty1 console=${console}" \
121                 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
122         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
123         "setusbupdate=usb start && setenv interface usb && " \
124                 "fatload ${interface} 0:1 ${loadaddr} " \
125                 "${board}/flash_blk.img && source ${loadaddr}\0" \
126         "splashpos=m,m\0" \
127         "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
128         "vidargs=video=mxsfb:640x480-16@60"
129
130 #define CONFIG_SYS_MEMTEST_START        0x80000000
131 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x08000000)
132
133 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
134
135 /* Physical Memory Map */
136 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
137
138 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
139 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
140 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
141
142 #define CONFIG_SYS_INIT_SP_OFFSET \
143         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
144 #define CONFIG_SYS_INIT_SP_ADDR \
145         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
146
147 #if defined(CONFIG_ENV_IS_IN_NAND)
148 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
149 #define CONFIG_ENV_OFFSET               (28 * CONFIG_ENV_SECT_SIZE)
150 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
151 #endif
152
153 /* NAND stuff */
154 #define CONFIG_SYS_MAX_NAND_DEVICE      1
155 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
156 #define CONFIG_SYS_NAND_BASE            -1
157 #define CONFIG_SYS_NAND_ONFI_DETECTION
158 #define CONFIG_SYS_NAND_USE_FLASH_BBT
159
160 /* USB Configs */
161 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
162
163 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
164 #define CONFIG_MXC_USB_FLAGS            0
165 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
166
167 #define CONFIG_IMX_THERMAL
168
169 #define CONFIG_USBD_HS
170
171 /* USB Device Firmware Update support */
172 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
173 #define DFU_DEFAULT_POLL_TIMEOUT        300
174
175 #ifdef CONFIG_VIDEO
176 #define CONFIG_VIDEO_MXS
177 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
178 #define CONFIG_VIDEO_LOGO
179 #define CONFIG_SPLASH_SCREEN
180 #define CONFIG_SPLASH_SCREEN_ALIGN
181 #define CONFIG_BMP_16BPP
182 #define CONFIG_VIDEO_BMP_RLE8
183 #define CONFIG_VIDEO_BMP_LOGO
184 #endif
185
186 #endif