include/configs/cgtqmx6eval.h

   1 /*
   2  *
   3  * Congatec Conga-QEVAl board configuration file.
   4  *
   5  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   6  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
   7  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   8  * Leo Sartre, <lsartre@adeneo-embedded.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_CGTQMX6EVAL_H
  14 #define __CONFIG_CGTQMX6EVAL_H
  15
  16 #include "mx6_common.h"
  17
  18 #define CONFIG_MACH_TYPE        4122
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_MISC_INIT_R
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE           UART2_BASE
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  31
  32 /* Miscellaneous commands */
  33 #define CONFIG_CMD_BMODE
  34
  35 /* Thermal support */
  36 #define CONFIG_IMX_THERMAL
  37
  38 /* I2C Configs */
  39 #define CONFIG_CMD_I2C
  40 #define CONFIG_SYS_I2C
  41 #define CONFIG_SYS_I2C_MXC
  42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43 #define CONFIG_SYS_I2C_SPEED              100000
  44
  45 /* PMIC */
  46 #define CONFIG_POWER
  47 #define CONFIG_POWER_I2C
  48 #define CONFIG_POWER_PFUZE100
  49 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  50
  51 /* USB Configs */
  52 #define CONFIG_CMD_USB
  53 #define CONFIG_CMD_FAT
  54 #define CONFIG_USB_EHCI
  55 #define CONFIG_USB_EHCI_MX6
  56 #define CONFIG_USB_STORAGE
  57 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  58 #define CONFIG_USB_HOST_ETHER
  59 #define CONFIG_USB_ETHER_ASIX
  60 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  61 #define CONFIG_MXC_USB_FLAGS    0
  62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
  63 #define CONFIG_USB_KEYBOARD
  64 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  65
  66 #define CONFIG_CI_UDC
  67 #define CONFIG_USBD_HS
  68 #define CONFIG_USB_GADGET_DUALSPEED
  69
  70 #define CONFIG_USB_GADGET
  71 #define CONFIG_CMD_USB_MASS_STORAGE
  72 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  73 #define CONFIG_USB_GADGET_DOWNLOAD
  74 #define CONFIG_USB_GADGET_VBUS_DRAW     2
  75
  76 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
  77 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
  78 #define CONFIG_G_DNL_MANUFACTURER       "Congatec"
  79
  80 /* Framebuffer */
  81 #define CONFIG_VIDEO
  82 #define CONFIG_VIDEO_IPUV3
  83 #define CONFIG_CFB_CONSOLE
  84 #define CONFIG_VGA_AS_SINGLE_DEVICE
  85 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  86 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  87 #define CONFIG_VIDEO_BMP_RLE8
  88 #define CONFIG_SPLASH_SCREEN
  89 #define CONFIG_SPLASH_SCREEN_ALIGN
  90 #define CONFIG_BMP_16BPP
  91 #define CONFIG_VIDEO_LOGO
  92 #define CONFIG_VIDEO_BMP_LOGO
  93 #ifdef CONFIG_MX6DL
  94 #define CONFIG_IPUV3_CLK 198000000
  95 #else
  96 #define CONFIG_IPUV3_CLK 264000000
  97 #endif
  98 #define CONFIG_IMX_HDMI
  99
 100 /* SATA */
 101 #define CONFIG_CMD_SATA
 102 #define CONFIG_DWC_AHSATA
 103 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 104 #define CONFIG_DWC_AHSATA_PORT_ID       0
 105 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 106 #define CONFIG_LBA48
 107 #define CONFIG_LIBATA
 108
 109 /* Ethernet */
 110 #define CONFIG_CMD_PING
 111 #define CONFIG_CMD_DHCP
 112 #define CONFIG_CMD_MII
 113 #define CONFIG_FEC_MXC
 114 #define CONFIG_MII
 115 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 116 #define CONFIG_FEC_XCV_TYPE             RGMII
 117 #define CONFIG_ETHPRIME                 "FEC"
 118 #define CONFIG_FEC_MXC_PHYADDR          6
 119 #define CONFIG_PHYLIB
 120 #define CONFIG_PHY_ATHEROS
 121
 122 /* Command definition */
 123
 124 #define CONFIG_MXC_UART_BASE    UART2_BASE
 125 #define CONFIG_CONSOLE_DEV      "ttymxc1"
 126 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 127 #define CONFIG_SYS_MMC_ENV_DEV          0
 128
 129 #define CONFIG_EXTRA_ENV_SETTINGS \
 130         "script=boot.scr\0" \
 131         "image=zImage\0" \
 132         "fdtfile=imx6q-qmx6.dtb\0" \
 133         "fdt_addr_r=0x18000000\0" \
 134         "boot_fdt=try\0" \
 135         "ip_dyn=yes\0" \
 136         "console=" CONFIG_CONSOLE_DEV "\0" \
 137         "bootm_size=0x10000000\0" \
 138         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 139         "mmcpart=1\0" \
 140         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 141         "update_sd_firmware=" \
 142                 "if test ${ip_dyn} = yes; then " \
 143                         "setenv get_cmd dhcp; " \
 144                 "else " \
 145                         "setenv get_cmd tftp; " \
 146                 "fi; " \
 147                 "if mmc dev ${mmcdev}; then "   \
 148                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 149                                 "setexpr fw_sz ${filesize} / 0x200; " \
 150                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 151                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 152                         "fi; "  \
 153                 "fi\0" \
 154         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 155                 "root=${mmcroot}\0" \
 156         "loadbootscript=" \
 157                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 158         "bootscript=echo Running bootscript from mmc ...; " \
 159                 "source\0" \
 160         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 161         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 162         "mmcboot=echo Booting from mmc ...; " \
 163                 "run mmcargs; " \
 164                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 165                         "if run loadfdt; then " \
 166                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 167                         "else " \
 168                                 "if test ${boot_fdt} = try; then " \
 169                                         "bootz; " \
 170                                 "else " \
 171                                         "echo WARN: Cannot load the DT; " \
 172                                 "fi; " \
 173                         "fi; " \
 174                 "else " \
 175                         "bootz; " \
 176                 "fi;\0" \
 177         "netargs=setenv bootargs console=${console},${baudrate} " \
 178                 "root=/dev/nfs " \
 179                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 180         "netboot=echo Booting from net ...; " \
 181                 "run netargs; " \
 182                 "if test ${ip_dyn} = yes; then " \
 183                         "setenv get_cmd dhcp; " \
 184                 "else " \
 185                         "setenv get_cmd tftp; " \
 186                 "fi; " \
 187                 "${get_cmd} ${image}; " \
 188                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 189                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 190                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 191                         "else " \
 192                                 "if test ${boot_fdt} = try; then " \
 193                                         "bootz; " \
 194                                 "else " \
 195                                         "echo WARN: Cannot load the DT; " \
 196                                 "fi; " \
 197                         "fi; " \
 198                 "else " \
 199                         "bootz; " \
 200                 "fi;\0" \
 201
 202 #define CONFIG_BOOTCOMMAND \
 203         "mmc dev ${mmcdev};" \
 204         "if mmc rescan; then " \
 205                 "if run loadbootscript; then " \
 206                 "run bootscript; " \
 207                 "else " \
 208                         "if run loadimage; then " \
 209                                 "run mmcboot; " \
 210                         "else run netboot; " \
 211                         "fi; " \
 212                 "fi; " \
 213         "else run netboot; fi"
 214
 215 #define CONFIG_SYS_MEMTEST_START       0x10000000
 216 #define CONFIG_SYS_MEMTEST_END         0x10010000
 217 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 218
 219 /* Physical Memory Map */
 220 #define CONFIG_NR_DRAM_BANKS           1
 221 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 222 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 223
 224 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 225 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 226 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 227
 228 #define CONFIG_SYS_INIT_SP_OFFSET \
 229         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 230 #define CONFIG_SYS_INIT_SP_ADDR \
 231         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 232
 233 /* Environment organization */
 234 #define CONFIG_ENV_SIZE                 (8 * 1024)
 235
 236 #define CONFIG_ENV_IS_IN_MMC
 237
 238 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 239 #define CONFIG_SYS_MMC_ENV_DEV          0
 240
 241 #endif                         /* __CONFIG_CGTQMX6EVAL_H */