1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2018 Cisco Systems, Inc.
5 * Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
7 * Configuration settings for the Broadcom BCMSTB SoC family.
14 #include <linux/sizes.h>
18 #include <linux/types.h>
20 struct bcmstb_boot_parameters {
29 extern struct bcmstb_boot_parameters bcmstb_boot_parameters;
31 extern phys_addr_t prior_stage_fdt_address;
33 #endif /* __ASSEMBLY__ */
36 * Generic board configuration.
38 #define CONFIG_SYS_GENERIC_BOARD
43 #define CONFIG_SKIP_LOWLEVEL_INIT
46 * Memory configuration.
48 * The prior stage BOLT bootloader sets up memory for us.
50 * An example boot memory layout after loading everything is:
52 * 0x0000 8000 vmlinux.bin.gz
53 * : [~31 MiB uncompressed max]
54 * 0x01ef f000 FIT containing signed public key
56 * 0x01f0 0000 DTB copied from prior-stage-provided region
58 * 0x0200 0000 FIT containing ramdisk and device tree
60 * : [~208 MiB uncompressed max, to CMA/bmem low address]
61 * : [~80 MiB compressed max, to PSB low address]
62 * : device tree binary
64 * 0x0700 0000 Prior stage bootloader (PSB)
66 * 0x0761 7000 Prior-stage-provided device tree binary (DTB)
68 * 0x0f00 0000 Contiguous memory allocator (CMA/bmem) low address
70 * 0x8010 0000 U-Boot code at ELF load address
71 * : [~500 KiB in size, stripped]
72 * 0xc000 0000 Top of RAM
74 * Setting gd->relocaddr to CONFIG_SYS_TEXT_BASE in dram_init_banksize
75 * prevents U-Boot from relocating itself when it is run as an ELF
76 * program by the prior stage bootloader.
78 * We want to keep the ramdisk and FDT in the FIT image in-place, to
79 * accommodate stblinux's bmem and CMA regions. To accomplish this,
80 * we set initrd_high and fdt_high to 0xffffffff, and the load and
81 * entry addresses of the FIT ramdisk entry to 0x0.
83 * Overwriting the prior stage bootloader causes memory instability,
84 * so the compressed initramfs needs to fit between the load address
85 * and the PSB low address. In BOLT's default configuration this
86 * limits the compressed size of the initramfs to approximately 80
87 * MiB. However, BOLT can be configured to allow loading larger
88 * initramfs images, in which case this limitation is eliminated.
90 #define CONFIG_NR_DRAM_BANKS 3
92 #define CONFIG_SYS_SDRAM_BASE 0x00000000
93 #define CONFIG_SYS_TEXT_BASE 0x80100000
94 #define CONFIG_SYS_INIT_RAM_ADDR 0x80200000
95 #define CONFIG_SYS_INIT_RAM_SIZE 0x100000
96 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
97 CONFIG_SYS_INIT_RAM_SIZE - \
98 GENERATED_GBL_DATA_SIZE)
99 #define CONFIG_SYS_MALLOC_LEN ((10 * 1024) << 10) /* 10 MiB */
100 #define CONFIG_SYS_LOAD_ADDR 0x2000000
103 * CONFIG_SYS_LOAD_ADDR - 1 MiB.
105 #define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000
106 #define CONFIG_SYS_CBSIZE 512
107 #define CONFIG_SYS_MAXARGS 32
110 * Large kernel image bootm configuration.
112 #define CONFIG_SYS_BOOTM_LEN SZ_64M
115 * NS16550 configuration.
117 #define V_NS16550_CLK 81000000
119 #define CONFIG_SYS_NS16550
120 #define CONFIG_SYS_NS16550_SERIAL
121 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
122 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
125 * Serial console configuration.
127 #define CONFIG_SERIAL3 3
129 #define CONFIG_BAUDRATE 115200
130 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
134 * Informational display configuration.
136 #define CONFIG_REVISION_TAG
139 * Command configuration.
141 #define CONFIG_CMD_ASKENV
142 #define CONFIG_CMD_CACHE
143 #define CONFIG_CMD_EXT2
144 #define CONFIG_CMD_SF
145 #define CONFIG_CMD_SPI
146 #define CONFIG_CMD_SF_TEST
147 #define CONFIG_CMD_MMC
150 * Flash configuration.
152 #define CONFIG_ST_SMI
153 #define CONFIG_SPI_FLASH_STMICRO
154 #define CONFIG_SPI_FLASH_MACRONIX
157 * Filesystem configuration.
159 #define CONFIG_DOS_PARTITION
160 #define CONFIG_CMD_EXT4
161 #define CONFIG_FS_EXT4
162 #define CONFIG_CMD_FS_GENERIC
165 * Environment configuration.
167 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
169 #define CONFIG_ENV_IS_IN_SPI_FLASH 1
170 #define CONFIG_ENV_OFFSET 0x1e0000
171 #define CONFIG_ENV_SIZE (64 << 10) /* 64 KiB */
172 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
173 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
174 #define CONFIG_ENV_OVERWRITE
177 * Save the prior stage provided DTB.
179 #define CONFIG_PREBOOT \
180 "fdt addr ${fdtcontroladdr};" \
181 "fdt move ${fdtcontroladdr} ${fdtsaveaddr};" \
182 "fdt addr ${fdtsaveaddr};"
184 * Enable in-place RFS with this initrd_high setting.
186 #define CONFIG_EXTRA_ENV_SETTINGS \
187 "fdtsaveaddr=" __stringify(CONFIG_SYS_FDT_SAVE_ADDRESS) "\0" \
188 "initrd_high=0xffffffff\0" \
189 "fdt_high=0xffffffff\0"
192 * Set fdtaddr to prior stage-provided DTB in board_late_init, when
193 * writeable environment is available.
195 #define CONFIG_BOARD_LATE_INIT
197 #define CONFIG_SYS_MAX_FLASH_BANKS 1
199 #define CONFIG_DM_SPI 1
201 #endif /* __BCMSTB_H */