4 * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem
5 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation version 2.
11 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
12 * kind, whether express or implied; without even the implied warranty
13 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
17 #ifndef __CONFIG_BAV335X_H
18 #define __CONFIG_BAV335X_H
20 #include <configs/ti_am335x_common.h>
21 #define CONFIG_ENV_IS_NOWHERE
23 #ifndef CONFIG_SPL_BUILD
24 # define CONFIG_TIMESTAMP
26 # ifdef CONFIG_ENABLE_VBOOT
30 #define CONFIG_SYS_BOOTM_LEN (16 << 20)
32 #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
33 #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
36 #define V_OSCK 24000000 /* Clock output from T2 */
37 #define V_SCLK (V_OSCK)
39 /* Custom script for NOR */
40 #define CONFIG_SYS_LDSCRIPT "board/birdland/bav335x/u-boot.lds"
42 /* Always 128 KiB env size */
43 #define CONFIG_ENV_SIZE (128 << 10)
45 /* Enhance our eMMC support / experience. */
46 #define CONFIG_CMD_GPT
47 #define CONFIG_EFI_PARTITION
51 "mtdids=" MTDIDS_DEFAULT "\0" \
52 "mtdparts=" MTDPARTS_DEFAULT "\0" \
53 "nandargs=setenv bootargs console=${console} " \
56 "rootfstype=${nandrootfstype}\0" \
57 "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
58 "nandrootfstype=ubifs rootwait=1\0" \
59 "nandboot=echo Booting from nand ...; " \
61 "nand read ${fdtaddr} u-boot-spl-os; " \
62 "nand read ${loadaddr} kernel; " \
63 "bootz ${loadaddr} - ${fdtaddr}\0"
68 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
70 #ifndef CONFIG_SPL_BUILD
71 #define CONFIG_EXTRA_ENV_SETTINGS \
72 DEFAULT_LINUX_BOOT_ENV \
78 "fdtfile=undefined\0" \
79 "console=ttyO0,115200n8\0" \
80 "loadaddr=0x82000000\0" \
81 "fdtaddr=0x88000000\0" \
82 "rdaddr=0x88080000\0" \
83 "initrd_high=0xffffffff\0" \
84 "fdt_high=0xffffffff\0" \
86 "uuid_disk=${uuid_gpt_disk};" \
87 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
92 "mmcroot=/dev/mmcblk0p2 ro\0" \
93 "mmcrootfstype=ext4 rootwait fixrtc\0" \
94 "rootpath=/export/rootfs\0" \
96 "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
97 "ramroot=/dev/ram0 rw\0" \
98 "ramrootfstype=ext2\0" \
99 "mmcargs=setenv bootargs console=${console} ${optargs} " \
100 "root=${mmcroot} rootfstype=${mmcrootfstype} ${cmdline}\0" \
101 "server_ip=192.168.1.100\0" \
102 "gw_ip=192.168.1.1\0" \
103 "netmask=255.255.255.0\0" \
107 "root_dir=/home/userid/targetNFS\0" \
108 "nfs_options=,vers=3\0" \
109 "nfsrootfstype=ext4 rootwait fixrtc\0" \
110 "nfsargs=setenv bootargs console=${console} ${optargs} " \
111 "root=/dev/nfs rw rootfstype=${nfsrootfstype} " \
112 "nfsroot=${nfsroot} ip=${ip} ${cmdline}\0" \
113 "netargs=setenv bootargs console=${console} " \
114 "${optargs} root=/dev/nfs " \
115 "nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp\0" \
116 "bootenv=uEnv.txt\0" \
117 "script=boot.scr\0" \
118 "scriptfile=${script}\0" \
119 "loadbootscript=load mmc ${bootpart} ${loadaddr} ${scriptfile};\0" \
120 "bootscript=echo Running bootscript from mmc${bootpart} ...; " \
121 "source ${loadaddr}\0" \
122 "loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \
123 "importbootenv=echo Importing environment from mmc ...; " \
124 "env import -t -r $loadaddr $filesize\0" \
125 "ramargs=setenv bootargs console=${console} " \
126 "${optargs} root=${ramroot} rootfstype=${ramrootfstype}\0" \
127 "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
128 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
129 "loadrd=load mmc ${bootpart} ${rdaddr} " \
130 "${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \
131 "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; " \
132 "load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
133 "mmcboot=mmc dev ${mmcdev}; " \
134 "if mmc rescan; then " \
136 "setenv bootpart ${mmcdev}:1; " \
137 "if test -e mmc ${bootpart} /etc/fstab; then " \
138 "setenv mmcpart 1;" \
140 "echo Checking for: /uEnv.txt ...;" \
141 "if test -e mmc ${bootpart} /uEnv.txt; then " \
142 "if run loadbootenv; then " \
144 "echo Loaded environment from ${bootenv};" \
145 "run importbootenv;" \
147 "echo Checking if uenvcmd is set ...;" \
148 "if test -n ${uenvcmd}; then " \
150 "echo Running uenvcmd ...;" \
153 "echo Checking if client_ip is set ...;" \
154 "if test -n ${client_ip}; then " \
155 "if test -n ${dtb}; then " \
156 "setenv fdtfile ${dtb};" \
157 "echo using ${fdtfile} ...;" \
160 "if test -n ${uname_r}; then " \
161 "echo Running nfsboot_uname_r ...;" \
162 "run nfsboot_uname_r;" \
164 "echo Running nfsboot ...;" \
168 "echo Checking for: /${script} ...;" \
169 "if test -e mmc ${bootpart} /${script}; then " \
171 "setenv scriptfile ${script};" \
172 "run loadbootscript;" \
173 "echo Loaded script from ${scriptfile};" \
177 "echo Checking for: /boot/${script} ...;" \
178 "if test -e mmc ${bootpart} /boot/${script}; then " \
180 "setenv scriptfile /boot/${script};" \
181 "run loadbootscript;" \
182 "echo Loaded script from ${scriptfile};" \
186 "echo Checking for: /boot/uEnv.txt ...;" \
187 "for i in 1 2 3 4 5 6 7 ; do " \
188 "setenv mmcpart ${i};" \
189 "setenv bootpart ${mmcdev}:${mmcpart};" \
190 "if test -e mmc ${bootpart} /boot/uEnv.txt; then " \
192 "load mmc ${bootpart} ${loadaddr} " \
194 "env import -t ${loadaddr} ${filesize};" \
195 "echo Loaded environment from /boot/uEnv.txt;" \
196 "if test -n ${dtb}; then " \
197 "setenv fdtfile ${dtb};" \
198 "echo Using: dtb=${fdtfile} ...;" \
200 "echo Checking if uname_r is set in " \
201 "/boot/uEnv.txt...;" \
202 "if test -n ${uname_r}; then " \
204 "echo Running uname_boot ...;" \
205 "setenv mmcroot /dev/mmcblk${mmcdev}" \
212 "netboot=echo Booting from network ...; " \
213 "setenv autoload no; " \
215 "tftp ${loadaddr} ${bootfile}; " \
216 "tftp ${fdtaddr} ${fdtfile}; " \
218 "bootz ${loadaddr} - ${fdtaddr}\0" \
219 "nfsboot=echo Booting from ${server_ip} ...; " \
220 "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
221 "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \
222 ":${device}:${autoconf}; " \
223 "setenv autoload no; " \
224 "setenv serverip ${server_ip}; " \
225 "setenv ipaddr ${client_ip}; " \
226 "tftp ${loadaddr} ${bootfile}; " \
227 "tftp ${fdtaddr} dtbs/${fdtfile}; " \
229 "bootz ${loadaddr} - ${fdtaddr}\0" \
230 "nfsboot_uname_r=echo Booting from ${server_ip} ...; " \
231 "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
232 "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \
233 ":${device}:${autoconf}; " \
234 "setenv autoload no; " \
235 "setenv serverip ${server_ip}; " \
236 "setenv ipaddr ${client_ip}; " \
237 "tftp ${loadaddr} vmlinuz-${uname_r}; " \
238 "tftp ${fdtaddr} dtbs/${uname_r}/${fdtfile}; " \
240 "bootz ${loadaddr} - ${fdtaddr}\0" \
241 "ramboot=echo Booting from ramdisk ...; " \
243 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
245 "if test $board_rev = B; then " \
246 "setenv fdtfile birdland_bav335b.dtb; " \
247 "setenv fdtbase am335x-boneblack; fi; " \
248 "if test $board_rev = A; then " \
249 "setenv fdtfile birdland_bav335a.dtb; " \
250 "setenv fdtbase am335x-boneblack; fi; " \
251 "if test $fdtfile = undefined; then " \
252 "echo WARNING: Could not determine device tree to use; fi; \0" \
254 "setenv bootdir /boot; " \
255 "setenv bootfile vmlinuz-${uname_r}; " \
256 "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
257 "echo loading ${bootdir}/${bootfile} ...; "\
259 "setenv fdtdir /boot/dtbs/${uname_r}; " \
260 "if test -e mmc ${bootpart} ${fdtdir}/${fdtfile}; then " \
263 "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \
264 "if test -e mmc ${bootpart} ${fdtdir}/" \
265 "${fdtfile}; then " \
268 "setenv fdtdir /boot/dtb-${uname_r}; " \
269 "if test -e mmc ${bootpart} ${fdtdir}" \
270 "/${fdtfile}; then " \
273 "setenv fdtdir /boot/dtbs; " \
274 "if test -e mmc ${bootpart} ${fdtdir}" \
275 "/${fdtfile}; then " \
278 "echo; echo unable to find " \
280 "did you name it correctly?" \
281 "echo booting fallback " \
284 "/${fdtbase}.dtb]...;" \
285 "setenv fdtdir /boot/dtbs/" \
295 "setenv rdfile initrd.img-${uname_r}; " \
296 "if test -e mmc ${bootpart} ${bootdir}/${rdfile}; then " \
297 "echo loading ${bootdir}/${rdfile} ...; "\
299 "if test -n ${uuid}; then " \
300 "setenv mmcroot UUID=${uuid} ro;" \
303 "echo debug: [${bootargs}] ... ;" \
304 "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} " \
305 "${fdtaddr}] ... ;" \
306 "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
309 "echo debug: [${bootargs}] ... ;" \
310 "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
311 "bootz ${loadaddr} - ${fdtaddr}; " \
318 #define CONFIG_BOOTCOMMAND \
320 "i2c mw 0x24 1 0x3e; " \
322 "setenv mmcdev 0; " \
323 "setenv bootpart 0:1; " \
328 "setenv mmcdev 1; " \
329 "setenv bootpart 1:1; " \
332 /* NS16550 Configuration */
333 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
334 #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
335 #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
336 #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
337 #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
338 #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
339 #define CONFIG_BAUDRATE 115200
341 #define CONFIG_CMD_EEPROM
342 #define CONFIG_ENV_EEPROM_IS_ON_I2C
343 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
344 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
347 #define CONFIG_POWER_TPS65217
348 #define CONFIG_POWER_TPS65910
351 #ifndef CONFIG_NOR_BOOT
352 /* Bootcount using the RTC block */
353 #define CONFIG_BOOTCOUNT_LIMIT
354 #define CONFIG_BOOTCOUNT_AM33XX
355 #define CONFIG_SYS_BOOTCOUNT_BE
357 /* USB gadget RNDIS */
359 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
363 /* NAND: device related configs */
364 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
365 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
366 CONFIG_SYS_NAND_PAGE_SIZE)
367 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
368 #define CONFIG_SYS_NAND_OOBSIZE 64
369 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
370 /* NAND: driver related configs */
371 #define CONFIG_NAND_OMAP_GPMC
372 #define CONFIG_NAND_OMAP_ELM
373 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
374 #define CONFIG_SYS_NAND_ECCPOS { \
375 2, 3, 4, 5, 6, 7, 8, 9, \
376 10, 11, 12, 13, 14, 15, 16, 17, \
377 18, 19, 20, 21, 22, 23, 24, 25, \
378 26, 27, 28, 29, 30, 31, 32, 33, \
379 34, 35, 36, 37, 38, 39, 40, 41, \
380 42, 43, 44, 45, 46, 47, 48, 49, \
381 50, 51, 52, 53, 54, 55, 56, 57, }
383 #define CONFIG_SYS_NAND_ECCSIZE 512
384 #define CONFIG_SYS_NAND_ECCBYTES 14
385 #define CONFIG_SYS_NAND_ONFI_DETECTION
386 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
387 #define MTDIDS_DEFAULT "nand0=nand.0"
388 #define MTDPARTS_DEFAULT \
391 "128k(NAND.SPL.backup1)," \
392 "128k(NAND.SPL.backup2)," \
393 "128k(NAND.SPL.backup3)," \
394 "256k(NAND.u-boot-spl-os)," \
396 "128k(NAND.u-boot-env)," \
397 "128k(NAND.u-boot-env.backup1)," \
400 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
401 #undef CONFIG_ENV_IS_NOWHERE
402 #define CONFIG_ENV_IS_IN_NAND
403 #define CONFIG_ENV_OFFSET 0x001c0000
404 #define CONFIG_ENV_OFFSET_REDUND 0x001e0000
405 #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
406 /* NAND: SPL related configs */
407 #ifdef CONFIG_SPL_NAND_SUPPORT
408 #define CONFIG_SPL_NAND_AM33XX_BCH
410 #ifdef CONFIG_SPL_OS_BOOT
411 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
412 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
413 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
415 #endif /* !CONFIG_NAND */
418 * For NOR boot, we must set this to the start of where NOR is mapped
421 #ifdef CONFIG_NOR_BOOT
422 #define CONFIG_SYS_TEXT_BASE 0x08000000
426 * USB configuration. We enable MUSB support, both for host and for
427 * gadget. We set USB0 as peripheral and USB1 as host, based on the
428 * board schematic and physical port wired to each. Then for host we
429 * add mass storage support and for gadget we add both RNDIS ethernet
432 #define CONFIG_USB_MUSB_DSPS
433 #define CONFIG_USB_MUSB_PIO_ONLY
434 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
435 #define CONFIG_AM335X_USB0
436 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
437 #define CONFIG_AM335X_USB1
438 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
440 #ifndef CONFIG_SPL_USBETH_SUPPORT
442 #define CONFIG_USB_FUNCTION_FASTBOOT
443 #define CONFIG_CMD_FASTBOOT
444 #define CONFIG_ANDROID_BOOT_IMAGE
445 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
446 #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
448 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
451 #ifdef CONFIG_USB_MUSB_GADGET
452 #define CONFIG_USB_FUNCTION_MASS_STORAGE
453 #endif /* CONFIG_USB_MUSB_GADGET */
455 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
456 /* disable host part of MUSB in SPL */
457 /* disable EFI partitions and partition UUID support */
458 #undef CONFIG_PARTITION_UUIDS
459 #undef CONFIG_EFI_PARTITION
462 /* USB Device Firmware Update support */
463 #ifndef CONFIG_SPL_BUILD
464 #define DFU_ALT_INFO_MMC \
465 "dfu_alt_info_mmc=" \
469 "MLO.raw raw 0x100 0x100;" \
470 "u-boot.img.raw raw 0x300 0x400;" \
471 "spl-os-args.raw raw 0x80 0x80;" \
472 "spl-os-image.raw raw 0x900 0x2000;" \
473 "spl-os-args fat 0 1;" \
474 "spl-os-image fat 0 1;" \
475 "u-boot.img fat 0 1;" \
478 #define DFU_ALT_INFO_NAND \
479 "dfu_alt_info_nand=" \
481 "SPL.backup1 part 0 2;" \
482 "SPL.backup2 part 0 3;" \
483 "SPL.backup3 part 0 4;" \
485 "u-boot-spl-os part 0 6;" \
489 #define DFU_ALT_INFO_NAND ""
491 #define DFU_ALT_INFO_RAM \
492 "dfu_alt_info_ram=" \
493 "kernel ram 0x80200000 0xD80000;" \
494 "fdt ram 0x80F80000 0x80000;" \
495 "ramdisk ram 0x81000000 0x4000000\0"
497 "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
504 * Default to using SPI for environment, etc.
505 * 0x000000 - 0x020000 : SPL (128KiB)
506 * 0x020000 - 0x0A0000 : U-Boot (512KiB)
507 * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
508 * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
509 * 0x0E0000 - 0x442000 : Linux Kernel
510 * 0x442000 - 0x800000 : Userland
512 #if defined(CONFIG_SPI_BOOT)
514 #define CONFIG_SPL_SPI_LOAD
515 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
517 #define CONFIG_ENV_IS_IN_SPI_FLASH
518 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
519 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
520 #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
521 #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
522 #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
523 #define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
524 #define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
525 "512k(u-boot),128k(u-boot-env1)," \
526 "128k(u-boot-env2),3464k(kernel)," \
528 #elif defined(CONFIG_EMMC_BOOT)
529 #undef CONFIG_ENV_IS_NOWHERE
530 #define CONFIG_ENV_IS_IN_MMC
531 #define CONFIG_SYS_MMC_ENV_DEV 1
532 #define CONFIG_SYS_MMC_ENV_PART 2
533 #define CONFIG_ENV_OFFSET 0x0
534 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
535 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
539 #define CONFIG_SF_DEFAULT_SPEED 24000000
542 #define CONFIG_PHY_GIGE
543 #define CONFIG_PHYLIB
544 #define CONFIG_PHY_SMSC
548 * Number of Sectors/Blocks = 128
549 * Sector Size = 128 KiB
550 * Word length = 16 bits
552 * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
553 * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
554 * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
555 * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
556 * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
558 #if defined(CONFIG_NOR)
559 #undef CONFIG_SYS_NO_FLASH
560 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
561 #define CONFIG_SYS_FLASH_PROTECTION
562 #define CONFIG_SYS_FLASH_CFI
563 #define CONFIG_FLASH_CFI_DRIVER
564 #define CONFIG_FLASH_CFI_MTD
565 #define CONFIG_SYS_MAX_FLASH_SECT 128
566 #define CONFIG_SYS_MAX_FLASH_BANKS 1
567 #define CONFIG_SYS_FLASH_BASE (0x08000000)
568 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
569 #define CONFIG_SYS_FLASH_SIZE 0x01000000
570 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
571 /* Reduce SPL size by removing unlikey targets */
572 #ifdef CONFIG_NOR_BOOT
573 #define CONFIG_ENV_IS_IN_FLASH
574 #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
575 #define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
576 #define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
577 #define MTDIDS_DEFAULT "nor0=physmap-flash.0"
578 #define MTDPARTS_DEFAULT \
579 "mtdparts=physmap-flash.0:" \
581 "128k(u-boot-env1)," \
582 "128k(u-boot-env2)," \
583 "4m(kernel),-(rootfs)"
585 #endif /* NOR support */
587 #endif /* ! __CONFIG_AM335X_EVM_H */