include/configs/baltos.h

   1 /*
   2  * am335x_evm.h
   3  *
   4  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation version 2.
   9  *
  10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  11  * kind, whether express or implied; without even the implied warranty
  12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #ifndef __CONFIG_BALTOS_H
  17 #define __CONFIG_BALTOS_H
  18
  19 #include <linux/sizes.h>
  20 #include <configs/ti_am335x_common.h>
  21
  22 #define MACH_TYPE_TIAM335EVM            3589    /* Until the next sync */
  23 #define CONFIG_MACH_TYPE                MACH_TYPE_TIAM335EVM
  24
  25 /* Clock Defines */
  26 #define V_OSCK                          24000000  /* Clock output from T2 */
  27 #define V_SCLK                          (V_OSCK)
  28
  29 /* Custom script for NOR */
  30 #define CONFIG_SYS_LDSCRIPT             "board/vscom/baltos/u-boot.lds"
  31
  32 /* Always 128 KiB env size */
  33 #define CONFIG_ENV_SIZE                 (128 << 10)
  34
  35 /* Enhance our eMMC support / experience. */
  36 #define CONFIG_CMD_GPT
  37 #define CONFIG_PARTITION_UUIDS
  38 #define CONFIG_CMD_PART
  39
  40 /* FIT support */
  41 #define CONFIG_SYS_BOOTM_LEN         SZ_64M
  42
  43 /* UBI Support */
  44 #define CONFIG_CMD_MTDPARTS
  45 #define CONFIG_MTD_PARTITIONS
  46 #define CONFIG_MTD_DEVICE
  47 #define CONFIG_RBTREE
  48 #define CONFIG_LZO
  49 #define CONFIG_CMD_UBIFS
  50
  51 /* I2C configuration */
  52 #undef CONFIG_SYS_OMAP24_I2C_SPEED
  53 #define CONFIG_SYS_OMAP24_I2C_SPEED 1000
  54
  55 #ifdef CONFIG_NAND
  56 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x00080000
  57 #ifdef CONFIG_SPL_OS_BOOT
  58 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
  59 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
  60 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
  61 #endif
  62 #define NANDARGS \
  63         "mtdids=" MTDIDS_DEFAULT "\0" \
  64         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  65         "nandargs=setenv bootargs console=${console} " \
  66                 "${optargs} " \
  67                 "${mtdparts} " \
  68                 "root=${nandroot} " \
  69                 "rootfstype=${nandrootfstype}\0" \
  70         "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
  71         "nandrootfstype=ubifs rootwait=1\0" \
  72         "nandboot=echo Booting from nand ...; " \
  73                 "run nandargs; " \
  74                 "setenv loadaddr 0x84000000; " \
  75                 "ubi part UBI; " \
  76                 "ubifsmount ubi0:kernel; " \
  77                 "ubifsload $loadaddr kernel-fit.itb;" \
  78                 "ubifsumount; " \
  79                 "bootm ${loadaddr}#conf${board_name}; " \
  80                 "if test $? -ne 0; then echo Using default FIT config; " \
  81                 "bootm ${loadaddr}; fi;\0"
  82 #else
  83 #define NANDARGS ""
  84 #endif
  85
  86 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  87
  88 #ifndef CONFIG_SPL_BUILD
  89 #define CONFIG_EXTRA_ENV_SETTINGS \
  90         DEFAULT_LINUX_BOOT_ENV \
  91         "boot_fdt=try\0" \
  92         "bootpart=0:2\0" \
  93         "bootdir=/boot\0" \
  94         "bootfile=zImage\0" \
  95         "fdtfile=undefined\0" \
  96         "console=ttyO0,115200n8\0" \
  97         "partitions=" \
  98                 "uuid_disk=${uuid_gpt_disk};" \
  99                 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
 100         "optargs=\0" \
 101         "mmcdev=0\0" \
 102         "mmcroot=/dev/mmcblk0p2 ro\0" \
 103         "usbroot=/dev/sda2 ro\0" \
 104         "mmcrootfstype=ext4 rootwait\0" \
 105         "usbrootfstype=ext4 rootwait\0" \
 106         "rootpath=/export/rootfs\0" \
 107         "nfsopts=nolock\0" \
 108         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
 109                 "::off\0" \
 110         "ramroot=/dev/ram0 rw\0" \
 111         "ramrootfstype=ext2\0" \
 112         "mmcargs=setenv bootargs console=${console} " \
 113                 "${optargs} " \
 114                 "${mtdparts} " \
 115                 "root=${mmcroot} " \
 116                 "rootfstype=${mmcrootfstype}\0" \
 117         "usbargs=setenv bootargs console=${console} " \
 118                 "${optargs} " \
 119                 "${mtdparts} " \
 120                 "root=${usbroot} " \
 121                 "rootfstype=${usbrootfstype}\0" \
 122         "spiroot=/dev/mtdblock4 rw\0" \
 123         "spirootfstype=jffs2\0" \
 124         "spisrcaddr=0xe0000\0" \
 125         "spiimgsize=0x362000\0" \
 126         "spibusno=0\0" \
 127         "spiargs=setenv bootargs console=${console} " \
 128                 "${optargs} " \
 129                 "root=${spiroot} " \
 130                 "rootfstype=${spirootfstype}\0" \
 131         "netargs=setenv bootargs console=${console} " \
 132                 "${optargs} " \
 133                 "root=/dev/nfs " \
 134                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
 135                 "ip=dhcp\0" \
 136         "bootenv=uEnv.txt\0" \
 137         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 138         "usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \
 139         "importbootenv=echo Importing environment from mmc ...; " \
 140                 "env import -t $loadaddr $filesize\0" \
 141         "usbimportbootenv=echo Importing environment from USB ...; " \
 142                 "env import -t $loadaddr $filesize\0" \
 143         "ramargs=setenv bootargs console=${console} " \
 144                 "${optargs} " \
 145                 "root=${ramroot} " \
 146                 "rootfstype=${ramrootfstype}\0" \
 147         "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
 148         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 149         "usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \
 150         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 151         "usbloados=run usbargs; " \
 152                 "bootm ${loadaddr}#conf${board_name}; " \
 153                 "if test $? -ne 0; then " \
 154                         "echo Using default FIT configuration; " \
 155                         "bootm ${loadaddr}; " \
 156                 "fi;\0" \
 157         "mmcloados=run mmcargs; " \
 158                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 159                         "if run loadfdt; then " \
 160                                 "bootz ${loadaddr} - ${fdtaddr}; " \
 161                         "else " \
 162                                 "if test ${boot_fdt} = try; then " \
 163                                         "bootz; " \
 164                                 "else " \
 165                                         "echo WARN: Cannot load the DT; " \
 166                                 "fi; " \
 167                         "fi; " \
 168                 "else " \
 169                         "bootz; " \
 170                 "fi;\0" \
 171         "usbboot=usb reset; " \
 172                 "if usb storage; then " \
 173                         "echo USB drive found;" \
 174                         "if run usbloadbootenv; then " \
 175                                 "echo Loaded environment from ${bootenv};" \
 176                                 "run usbimportbootenv;" \
 177                         "fi;" \
 178                         "if test -n $uenvcmd; then " \
 179                                 "echo Running uenvcmd ...;" \
 180                                 "run uenvcmd;" \
 181                         "fi;" \
 182                         "if run usbloadimage; then " \
 183                                 "run usbloados;" \
 184                         "fi;" \
 185                 "fi;\0" \
 186         "mmcboot=mmc dev ${mmcdev}; " \
 187                 "if mmc rescan; then " \
 188                         "echo SD/MMC found on device ${mmcdev};" \
 189                         "if run loadbootenv; then " \
 190                                 "echo Loaded environment from ${bootenv};" \
 191                                 "run importbootenv;" \
 192                         "fi;" \
 193                         "if test -n $uenvcmd; then " \
 194                                 "echo Running uenvcmd ...;" \
 195                                 "run uenvcmd;" \
 196                         "fi;" \
 197                         "if run loadimage; then " \
 198                                 "run mmcloados;" \
 199                         "fi;" \
 200                 "fi;\0" \
 201         "spiboot=echo Booting from spi ...; " \
 202                 "run spiargs; " \
 203                 "sf probe ${spibusno}:0; " \
 204                 "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
 205                 "bootz ${loadaddr}\0" \
 206         "netboot=echo Booting from network ...; " \
 207                 "setenv autoload no; " \
 208                 "dhcp; " \
 209                 "tftp ${loadaddr} ${bootfile}; " \
 210                 "tftp ${fdtaddr} ${fdtfile}; " \
 211                 "run netargs; " \
 212                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 213         "ramboot=echo Booting from ramdisk ...; " \
 214                 "run ramargs; " \
 215                 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 216         "findfdt=setenv fdtfile am335x-baltos.dtb\0" \
 217         NANDARGS
 218         /*DFUARGS*/
 219 #endif
 220
 221 #define CONFIG_BOOTCOMMAND \
 222         "run findfdt; " \
 223         "run usbboot;" \
 224         "run mmcboot;" \
 225         "setenv mmcdev 1; " \
 226         "setenv bootpart 1:2; " \
 227         "run mmcboot;" \
 228         "run nandboot;"
 229
 230 /* NS16550 Configuration */
 231 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* Base EVM has UART0 */
 232 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 233 #define CONFIG_SYS_NS16550_COM3         0x48024000      /* UART2 */
 234 #define CONFIG_SYS_NS16550_COM4         0x481a6000      /* UART3 */
 235 #define CONFIG_SYS_NS16550_COM5         0x481a8000      /* UART4 */
 236 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 237 #define CONFIG_BAUDRATE                 115200
 238
 239 #define CONFIG_CMD_EEPROM
 240 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 241 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
 242 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 243
 244 /* PMIC support */
 245 #define CONFIG_POWER_TPS65910
 246
 247 /* SPL */
 248 #ifndef CONFIG_NOR_BOOT
 249 /* Bootcount using the RTC block */
 250 #define CONFIG_BOOTCOUNT_LIMIT
 251 #define CONFIG_BOOTCOUNT_AM33XX
 252
 253 /* USB gadget RNDIS */
 254
 255 /* General network SPL, both CPSW and USB gadget RNDIS */
 256 #define CONFIG_SPL_NET_VCI_STRING       "AM335x U-Boot SPL"*/
 257
 258 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
 259
 260 #ifdef CONFIG_NAND
 261 #define CONFIG_NAND_OMAP_GPMC
 262 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 263 #define CONFIG_NAND_OMAP_ELM
 264 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 265 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 266                                          CONFIG_SYS_NAND_PAGE_SIZE)
 267 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 268 #define CONFIG_SYS_NAND_OOBSIZE         64
 269 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 270 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 271 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 272                                          10, 11, 12, 13, 14, 15, 16, 17, \
 273                                          18, 19, 20, 21, 22, 23, 24, 25, \
 274                                          26, 27, 28, 29, 30, 31, 32, 33, \
 275                                          34, 35, 36, 37, 38, 39, 40, 41, \
 276                                          42, 43, 44, 45, 46, 47, 48, 49, \
 277                                          50, 51, 52, 53, 54, 55, 56, 57, }
 278
 279 #define CONFIG_SYS_NAND_ECCSIZE         512
 280 #define CONFIG_SYS_NAND_ECCBYTES        14
 281 #define CONFIG_SYS_NAND_ONFI_DETECTION
 282 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 283 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 284 #endif
 285 #endif
 286
 287 /*
 288  * USB configuration.  We enable MUSB support, both for host and for
 289  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 290  * board schematic and physical port wired to each.  Then for host we
 291  * add mass storage support and for gadget we add both RNDIS ethernet
 292  * and DFU.
 293  */
 294 #define CONFIG_USB_MUSB_DSPS
 295 #define CONFIG_USB_MUSB_PIO_ONLY
 296 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 297 #define CONFIG_AM335X_USB0
 298 #define CONFIG_AM335X_USB0_MODE MUSB_HOST
 299 #define CONFIG_AM335X_USB1
 300 #define CONFIG_AM335X_USB1_MODE MUSB_OTG
 301
 302 #ifdef CONFIG_USB_MUSB_GADGET
 303 #define CONFIG_USB_ETHER
 304 #define CONFIG_USB_ETH_RNDIS
 305 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
 306 #endif /* CONFIG_USB_MUSB_GADGET */
 307
 308 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 309 /* disable host part of MUSB in SPL */
 310 /* disable EFI partitions and partition UUID support */
 311 #undef CONFIG_PARTITION_UUIDS
 312 /*
 313  * Disable CPSW SPL support so we fit within the 101KiB limit.
 314  */
 315 #endif
 316
 317 /* Network. */
 318 #define CONFIG_PHY_GIGE
 319 #define CONFIG_PHYLIB
 320 #define CONFIG_PHY_ADDR                 0
 321 #define CONFIG_PHY_SMSC
 322 #define CONFIG_MII
 323 #define CONFIG_PHY_ATHEROS
 324
 325 /* NAND support */
 326 #ifdef CONFIG_NAND
 327 #define CONFIG_CMD_NAND
 328 #define GPMC_NAND_ECC_LP_x8_LAYOUT      1
 329 #if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
 330 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 331 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:128k(SPL)," \
 332                                         "128k(SPL.backup1)," \
 333                                         "128k(SPL.backup2)," \
 334                                         "128k(SPL.backup3)," \
 335                                         "1920k(u-boot)," \
 336                                         "-(UBI)"
 337 #define CONFIG_ENV_IS_NOWHERE
 338 #endif
 339 #endif
 340
 341 #endif  /* ! __CONFIG_BALTOS_H */