2 * Rick Bronson <rick@efn.org>
4 * Configuation settings for the AT91RM9200DK board.
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * If we are developing, we might want to start armboot from ram
30 * so we MUST NOT initialize critical regs like mem-timing ...
32 #define CONFIG_INIT_CRITICAL /* undef for developing */
34 /* ARM asynchronous clock */
35 #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
36 #define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
37 /* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
39 #define AT91_SLOW_CLOCK 32768 /* slow clock */
41 #define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
42 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
43 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
44 #define CONFIG_SETUP_MEMORY_TAGS 1
45 #define CONFIG_INITRD_TAG 1
48 * Size of malloc() pool
50 #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
51 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
53 #define CONFIG_BAUDRATE 115200
55 #define CFG_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
61 #undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
63 #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
65 #define CONFIG_BOOTDELAY 3
66 /* #define CONFIG_ENV_OVERWRITE 1 */
68 #define CONFIG_COMMANDS \
73 CFG_CMD_AUTOSCRIPT | \
78 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
79 #include <cmd_confdefs.h>
81 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
82 #define SECTORSIZE 512
86 #define ADDR_COLUMN_PAGE 3
88 #define NAND_ChipID_UNKNOWN 0x00
89 #define NAND_MAX_FLOORS 1
90 #define NAND_MAX_CHIPS 1
92 #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
93 #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
95 #define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
96 #define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
98 #define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
100 #define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
101 #define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
102 #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
103 #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
104 /* the following are NOP's in our implementation */
105 #define NAND_CTL_CLRALE(nandptr)
106 #define NAND_CTL_SETALE(nandptr)
107 #define NAND_CTL_CLRCLE(nandptr)
108 #define NAND_CTL_SETCLE(nandptr)
110 #define CONFIG_NR_DRAM_BANKS 1
111 #define PHYS_SDRAM 0x20000000
112 #define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
114 #define CFG_MEMTEST_START PHYS_SDRAM
115 #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
117 #define CONFIG_DRIVER_ETHER
118 #define CONFIG_NET_RETRY_COUNT 20
119 #define CONFIG_AT91C_USE_RMII
121 #define CONFIG_HAS_DATAFLASH 1
122 #define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
123 #define CFG_MAX_DATAFLASH_BANKS 2
124 #define CFG_MAX_DATAFLASH_PAGES 16384
125 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
126 #define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
128 #define PHYS_FLASH_1 0x10000000
129 #define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
130 #define CFG_FLASH_BASE PHYS_FLASH_1
131 #define CFG_MAX_FLASH_BANKS 1
132 #define CFG_MAX_FLASH_SECT 40
133 #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
134 #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
136 #undef CFG_ENV_IS_IN_DATAFLASH
138 #ifdef CFG_ENV_IS_IN_DATAFLASH
139 #define CFG_ENV_OFFSET 0x20000
140 #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
141 #define CFG_ENV_SIZE 0x2000 /* 0x8000 */
143 #define CFG_ENV_IS_IN_FLASH 1
144 #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* 0x10000 */
145 #define CFG_ENV_SIZE 0x2000 /* 0x8000 */
149 #define CFG_LOAD_ADDR 0x21000000 /* default load address */
151 #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */
152 #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
153 #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */
155 #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
157 #define CFG_PROMPT "Uboot> " /* Monitor Command Prompt */
158 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
159 #define CFG_MAXARGS 16 /* max number of command args */
160 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
163 /*-----------------------------------------------------------------------
164 * Board specific extension for bd_info
166 * This structure is embedded in the global bd_info (bd_t) structure
167 * and can be used by the board specific code (eg board/...)
172 /* helper variable for board environment handling
174 * env_crc_valid == 0 => uninitialised
175 * env_crc_valid > 0 => environment crc in flash is valid
176 * env_crc_valid < 0 => environment crc in flash is invalid
182 #define CFG_HZ AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to
183 AT91C_TC_TIMER_DIV1_CLOCK */
185 #define CONFIG_STACKSIZE (32*1024) /* regular stack */
187 #ifdef CONFIG_USE_IRQ
188 #error CONFIG_USE_IRQ not supported