include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #define CONFIG_MXC_UART_BASE    UART2_BASE
  17 #define CONSOLE_DEV     "ttymxc1"
  18
  19 #define CONFIG_FEC_XCV_TYPE             RGMII
  20
  21 /* Framebuffer */
  22 #define CONFIG_SYS_LDB_CLOCK    28341000
  23 #define CONFIG_LG4573
  24
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4501
  28 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  29
  30 /* MMC Configs */
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  32
  33 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          0
  36
  37 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  38
  39 #ifdef CONFIG_IMX_HAB
  40 #define HAB_EXTRA_SETTINGS \
  41         "hab_check_addr=" \
  42                 "if hab_auth_img ${check_addr} ${filesize} ; then " \
  43                         "true;" \
  44                 "else " \
  45                         "echo \"HAB checks ${hab_check_filetype} " \
  46                         "failed!\"; " \
  47                         "false; " \
  48                 "fi;\0" \
  49         "hab_check_file_fit=" \
  50                 "if env exists enable_hab_check && test " \
  51                         "${enable_hab_check} -eq 1 ; then " \
  52                         "setenv hab_check_filetype \"FIT file on SD card " \
  53                         "or eMMC\";" \
  54                         "env set check_addr ${fit_addr_r};" \
  55                         "run hab_check_addr;" \
  56                 "else " \
  57                         "true; "\
  58                 "fi;\0" \
  59         "hab_check_file_bootscript=" \
  60                 "if env exists enable_hab_check && test " \
  61                         "${enable_hab_check} -eq 1 ; then " \
  62                         "setenv hab_check_filetype \"Bootscript file\";" \
  63                         "env set check_addr ${loadaddr};" \
  64                         "run hab_check_addr;" \
  65                 "else " \
  66                         "true; "\
  67                 "fi;\0" \
  68         "hab_check_flash_fit=" \
  69                 "if env exists enable_hab_check && test " \
  70                         "${enable_hab_check} -eq 1 ; then " \
  71                         "setenv hab_check_filetype \"FIT files on flash\";" \
  72                         "env set check_addr ${fit_addr_r};" \
  73                         "run hab_check_addr;" \
  74                 "else " \
  75                         "true; "\
  76                 "fi;\0" \
  77         "enable_hab_check=1\0"
  78 #else
  79 #define HAB_EXTRA_SETTINGS \
  80         "hab_check_file_fit=echo HAB check FIT file always returns " \
  81                 "true;true\0" \
  82         "hab_check_flash_fit=echo HAB check flash FIT always returns " \
  83                 "true;true\0" \
  84         "hab_check_file_bootscript=echo HAB check bootscript always " \
  85                 "returns true;true\0" \
  86         "enable_hab_check=0\0"
  87 #endif
  88
  89 #if (CONFIG_SYS_BOARD_VERSION == 3)
  90 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
  91         "dead=led led_red on\0" \
  92         "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
  93         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
  94                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
  95         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
  96                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
  97         "mainboot=echo Booting from SD-card ...; " \
  98                 "run mainargs addmtd addmisc;" \
  99                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 100                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 101                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 102                 "run boot_board_type;" \
 103                 "bootm ${fit_addr_r}\0" \
 104         "mainargs=setenv bootargs console=${console},${baudrate} " \
 105                 "root=${mmcroot}\0" \
 106         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 107                 "${fit_file}\0" \
 108         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 109                 "${fit_addr_r} ${rescue_fit_file}\0"
 110 #elif (CONFIG_SYS_BOARD_VERSION == 4)
 111 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
 112         "dead=led led_red on;led led_red2 on;\0" \
 113         "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
 114         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
 115                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
 116         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 117                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
 118         "mainboot=echo Booting from SD-card ...; " \
 119                 "run mainargs addmtd addmisc;" \
 120                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 121                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 122                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 123                 "run boot_board_type;" \
 124                 "bootm ${fit_addr_r}\0" \
 125         "mainargs=setenv bootargs console=${console},${baudrate} " \
 126                 "root=${mmcroot}\0" \
 127         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 128                 "${fit_file}\0" \
 129         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 130                 "${fit_addr_r} ${rescue_fit_file}\0"
 131 #else
 132 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
 133         "dead=led led_red on\0" \
 134         "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
 135         "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
 136                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
 137         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 138                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
 139         "mainboot=echo Booting from SD-card ...; " \
 140                 "run mainargs addmtd addmisc;" \
 141                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 142                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 143                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 144                 "run boot_board_type;" \
 145                 "bootm ${fit_addr_r}\0" \
 146         "mainargs=setenv bootargs console=${console},${baudrate} " \
 147                 "root=${mmcroot}\0" \
 148         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 149                 "${fit_file}\0" \
 150         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 151                 "${fit_addr_r} ${rescue_fit_file}\0"
 152 #endif
 153
 154 #define CONFIG_EXTRA_ENV_SETTINGS \
 155         "disable_giga=yes\0" \
 156         "usb_pgood_delay=2000\0" \
 157         "nor_bootdelay=-2\0" \
 158         "script=u-boot.scr\0" \
 159         "fit_file=/boot/system.itb\0" \
 160         "rescue_fit_file=/boot/rescue.itb\0" \
 161         "loadaddr=0x12000000\0" \
 162         "fit_addr_r=0x14000000\0" \
 163         "uboot=/boot/u-boot.imx\0" \
 164         "uboot_sz=d0000\0" \
 165         "panel=lb07wv8\0" \
 166         "splashpos=m,m\0" \
 167         "console=" CONSOLE_DEV "\0" \
 168         "fdt_high=0xffffffff\0"   \
 169         "initrd_high=0xffffffff\0" \
 170         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 171         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
 172         "get_env=mw ${loadaddr} 0 0x20000;" \
 173                 "mmc rescan;" \
 174                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 175                 "env import -t ${loadaddr}\0" \
 176         "default_env=gpio set wp_spi_nor.gpio-hog;" \
 177                 "sf probe;" \
 178                 "sf protect unlock 0 0x1000000;" \
 179                 "mw ${loadaddr} 0 0x20000;" \
 180                 "env export -t ${loadaddr} serial# ethaddr " \
 181                 "board_type panel addmisc addmiscM addmiscC addmiscD;" \
 182                 "env default -a;" \
 183                 "env import -t ${loadaddr}\0" \
 184         "loadbootscript=" \
 185                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 186                 "${script};\0" \
 187         "loadbootscriptUSB=" \
 188                 "ext4load usb 0 ${loadaddr} ${script};\0" \
 189         "loadbootscriptUSBf=" \
 190                 "fatload usb 0 ${loadaddr} ${script};\0" \
 191         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
 192                 "source\0" \
 193         "bootscript=echo Running bootscript from mmc ...; " \
 194                 "source\0" \
 195         "mmcpart=1\0" \
 196         "mmcrescuepart=3\0" \
 197         "mmcdev=0\0" \
 198         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 199         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 200                 "root=${mmcroot}\0" \
 201         "mmcboot=echo Booting from mmc ...; " \
 202                 "run mmcargs addmtd addmisc;" \
 203                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 204                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 205                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 206                 "run boot_board_type;" \
 207                 "bootm ${fit_addr_r}\0" \
 208         "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 209                 "${fit_file}\0" \
 210         "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 211                 "${uboot}\0" \
 212         "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 213                 "${fit_addr_r} ${rescue_fit_file}\0" \
 214         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 215                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 216                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 217                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 218                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 219                 "sf write ${loadaddr} 400 ${filesize};" \
 220                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 221                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 222         "rescueargs=setenv bootargs console=${console},${baudrate} " \
 223                 "root=/dev/ram rw\0 " \
 224         "rescueboot=echo Booting rescue system ...; " \
 225                 "run rescueargs addmtd addmisc;" \
 226                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
 227                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 228                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 229                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 230                 "run boot_board_type;" \
 231                 "if bootm ${fit_addr_r}; then ; " \
 232                 "else " \
 233                         "run dead; " \
 234                 "fi; \0" \
 235         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
 236                 "\\\\${bootargs} " \
 237         "rescueReason=18\0 " \
 238         "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
 239         "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
 240         "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
 241                 "${rescue_fit_file}\0" \
 242         "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
 243                 "${rescue_fit_file}\0" \
 244         "usbroot=/dev/sda1 rootwait rw\0" \
 245         "usbboot=echo Booting from usb-stick ...; " \
 246                 "run usbargs addmtd addmisc;" \
 247                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 248                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 249                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 250                 "run boot_board_type;" \
 251                 "bootm ${fit_addr_r}\0" \
 252         "usbargs=setenv bootargs console=${console},${baudrate} " \
 253                 "root=${usbroot}\0" \
 254         "mmc_rescue_boot=" \
 255                 "run r_reason_syserr;" \
 256                 "if run mmc_rescue_load_fit hab_check_file_fit; then " \
 257                         "run rescueboot; " \
 258                 "else " \
 259                         "run dead; " \
 260                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
 261                 "fi;\0" \
 262         "main_rescue_boot=" \
 263                 "if run main_load_fit hab_check_flash_fit; then " \
 264                         "if run mainboot; then ; " \
 265                         "else " \
 266                                 "run r_reason_syserr;" \
 267                                 "if run rescue_load_fit hab_check_file_fit;" \
 268                                         "then run rescueboot; " \
 269                                 "else " \
 270                                         "run dead; " \
 271                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
 272                                 "fi; " \
 273                         "fi; " \
 274                 "else " \
 275                         "run r_reason_syserr;" \
 276                         "if run rescue_load_fit hab_check_file_fit; then " \
 277                                 "run rescueboot; " \
 278                         "else " \
 279                                 "run dead; " \
 280                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 281                         "fi; " \
 282                 "fi;\0" \
 283         "usb_mmc_rescue_boot=" \
 284                 "usb start;" \
 285                 "if usb storage; then " \
 286                         "if run loadbootscriptUSB " \
 287                                 "hab_check_file_bootscript;" \
 288                                 "then run bootscriptUSB; " \
 289                         "fi; " \
 290                         "if run loadbootscriptUSBf " \
 291                                 "hab_check_file_bootscript;" \
 292                                 "then run bootscriptUSB; " \
 293                         "fi; " \
 294                         "if run usb_load_fit hab_check_file_fit; then " \
 295                                 "run usbboot; " \
 296                         "fi; " \
 297                         "if run usb_load_fitf hab_check_file_fit; then " \
 298                                 "run usbboot; " \
 299                         "fi; "\
 300                         "if run usb_load_rescuefit hab_check_file_fit;" \
 301                                 "then run r_reason_syserr rescueboot;" \
 302                         "fi; " \
 303                         "if run usb_load_rescuefitf hab_check_file_fit;" \
 304                                 "then run r_reason_syserr rescueboot;" \
 305                         "fi; " \
 306                         "run mmc_rescue_boot;" \
 307                 "fi; "\
 308                 "run mmc_rescue_boot;\0" \
 309         "rescue_xload_boot=" \
 310                 "run r_reason_syserr;" \
 311                 "if test ${bootmode} -ne 0 ; then " \
 312                         "mmc dev ${mmcdev};" \
 313                         "if mmc rescan; then " \
 314                                 "if run mmc_rescue_load_fit " \
 315                                         "hab_check_file_fit; then " \
 316                                         "run rescueboot; " \
 317                                 "else " \
 318                                         "usb start;" \
 319                                         "if usb storage; then " \
 320                                                 "if run usb_load_rescuefit " \
 321                                                         "hab_check_file_fit;"\
 322                                                         "then " \
 323                                                         "run rescueboot;" \
 324                                                 "fi; " \
 325                                                 "if run usb_load_rescuefitf "\
 326                                                         "hab_check_file_fit;"\
 327                                                         "then " \
 328                                                         "run rescueboot;" \
 329                                                 "fi; " \
 330                                         "fi;" \
 331                                 "fi;" \
 332                                 "run dead; " \
 333                                 "echo RESCUE SYSTEM ON SD OR " \
 334                                         "USB BOOT FAILURE;" \
 335                         "else " \
 336                                 "usb start;" \
 337                                 "if usb storage; then " \
 338                                         "if run usb_load_rescuefit " \
 339                                                 "hab_check_file_fit; then " \
 340                                                 "run rescueboot;" \
 341                                         "fi; " \
 342                                         "if run usb_load_rescuefitf " \
 343                                                 "hab_check_file_fit; then " \
 344                                                 "run rescueboot;" \
 345                                         "fi; " \
 346                                 "fi;" \
 347                                 "run dead; " \
 348                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
 349                         "fi; " \
 350                 "else "\
 351                         "if run rescue_load_fit hab_check_file_fit; then " \
 352                                 "run rescueboot; " \
 353                         "else " \
 354                                 "run dead; " \
 355                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
 356                         "fi; " \
 357                 "fi;\0" \
 358         "ari_boot=if test ${bootmode} -ne 0 ; then " \
 359                 "mmc dev ${mmcdev};" \
 360                 "if mmc rescan; then " \
 361                         "if run loadbootscript hab_check_file_bootscript;" \
 362                                 "then run bootscript; " \
 363                         "fi; " \
 364                         "if run mmc_load_fit hab_check_file_fit; then " \
 365                                 "if run mmcboot; then ; " \
 366                                 "else " \
 367                                         "run mmc_rescue_boot;" \
 368                                 "fi; " \
 369                         "else " \
 370                                 "run usb_mmc_rescue_boot;" \
 371                         "fi; " \
 372                 "else " \
 373                         "run usb_mmc_rescue_boot;" \
 374                 "fi; " \
 375         "else "\
 376                 "run main_rescue_boot;" \
 377         "fi; \0"\
 378         HAB_EXTRA_SETTINGS \
 379         CONFIG_EXTRA_ENV_BOARD_SETTINGS
 380
 381 #define CONFIG_ARP_TIMEOUT              200UL
 382
 383 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 384 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
 385 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 386
 387 /* Physical Memory Map */
 388 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 389
 390 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 391 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 392 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 393
 394 #define CONFIG_SYS_INIT_SP_OFFSET \
 395         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 396 #define CONFIG_SYS_INIT_SP_ADDR \
 397         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 398
 399 #define CONFIG_SYS_FSL_USDHC_NUM        2
 400
 401 /* NAND stuff */
 402 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 403 #define CONFIG_SYS_NAND_BASE            0x40000000
 404 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 405 #define CONFIG_SYS_NAND_ONFI_DETECTION
 406
 407 /* DMA stuff, needed for GPMI/MXS NAND support */
 408
 409 /* USB Configs */
 410 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 411 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 412 #define CONFIG_MXC_USB_FLAGS    0
 413
 414 /* UBI support */
 415
 416 /* Framebuffer */
 417 /* check this console not needed, after test remove it */
 418 #define CONFIG_SPLASH_SCREEN
 419 #define CONFIG_SPLASH_SCREEN_ALIGN
 420 #define CONFIG_IMX_VIDEO_SKIP
 421 #define CONFIG_VIDEO_LOGO
 422 #define CONFIG_VIDEO_BMP_LOGO
 423 #define CONFIG_BMP_16BPP
 424 #define CONFIG_VIDEO_BMP_RLE8
 425
 426 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 427
 428 #endif                         /* __ARISTAINETOS2_CONFIG_H */