include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #define CONFIG_MXC_UART_BASE    UART2_BASE
  17 #define CONSOLE_DEV     "ttymxc1"
  18
  19 #define CONFIG_FEC_XCV_TYPE             RGMII
  20
  21 /* Framebuffer */
  22 #define CONFIG_SYS_LDB_CLOCK    28341000
  23 #define CONFIG_LG4573
  24
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4501
  28 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  29
  30 /* MMC Configs */
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  32
  33 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          0
  36
  37 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  38
  39 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
  40         "dead=led led_red on\0" \
  41         "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
  42         "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
  43                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
  44         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
  45                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
  46         "mainboot=echo Booting from SD-card ...; " \
  47                 "run mainargs addmtd addmisc;" \
  48                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
  49                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
  50                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
  51                 "run boot_board_type;" \
  52                 "bootm ${fit_addr_r}\0" \
  53         "mainargs=setenv bootargs console=${console},${baudrate} " \
  54                 "root=${mmcroot}\0" \
  55         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
  56                 "${fit_file}\0" \
  57         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
  58                 "${fit_addr_r} ${rescue_fit_file}\0"
  59
  60 #define CONFIG_EXTRA_ENV_SETTINGS \
  61         "disable_giga=yes\0" \
  62         "usb_pgood_delay=2000\0" \
  63         "nor_bootdelay=-2\0" \
  64         "script=u-boot.scr\0" \
  65         "fit_file=/boot/system.itb\0" \
  66         "rescue_fit_file=/boot/rescue.itb\0" \
  67         "loadaddr=0x12000000\0" \
  68         "fit_addr_r=0x14000000\0" \
  69         "uboot=/boot/u-boot.imx\0" \
  70         "uboot_sz=d0000\0" \
  71         "panel=lb07wv8\0" \
  72         "splashpos=m,m\0" \
  73         "console=" CONSOLE_DEV "\0" \
  74         "fdt_high=0xffffffff\0"   \
  75         "initrd_high=0xffffffff\0" \
  76         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
  77         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
  78         "get_env=mw ${loadaddr} 0 0x20000;" \
  79                 "mmc rescan;" \
  80                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
  81                 "env import -t ${loadaddr}\0" \
  82         "default_env=gpio set wp_spi_nor.gpio-hog;" \
  83                 "sf probe;" \
  84                 "sf protect unlock 0 0x1000000;" \
  85                 "mw ${loadaddr} 0 0x20000;" \
  86                 "env export -t ${loadaddr} serial# ethaddr " \
  87                 "board_type panel addmisc addmiscM addmiscC addmiscD;" \
  88                 "env default -a;" \
  89                 "env import -t ${loadaddr}\0" \
  90         "loadbootscript=" \
  91                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
  92                 "${script};\0" \
  93         "loadbootscriptUSB=" \
  94                 "ext4load usb 0 ${loadaddr} ${script};\0" \
  95         "loadbootscriptUSBf=" \
  96                 "fatload usb 0 ${loadaddr} ${script};\0" \
  97         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
  98                 "source\0" \
  99         "bootscript=echo Running bootscript from mmc ...; " \
 100                 "source\0" \
 101         "mmcpart=1\0" \
 102         "mmcrescuepart=3\0" \
 103         "mmcdev=0\0" \
 104         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 105         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 106                 "root=${mmcroot}\0" \
 107         "mmcboot=echo Booting from mmc ...; " \
 108                 "run mmcargs addmtd addmisc;" \
 109                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 110                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 111                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 112                 "run boot_board_type;" \
 113                 "bootm ${fit_addr_r}\0" \
 114         "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 115                 "${fit_file}\0" \
 116         "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 117                 "${uboot}\0" \
 118         "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 119                 "${fit_addr_r} ${rescue_fit_file}\0" \
 120         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 121                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 122                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 123                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 124                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 125                 "sf write ${loadaddr} 400 ${filesize};" \
 126                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 127                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 128         "rescueargs=setenv bootargs console=${console},${baudrate} " \
 129                 "root=/dev/ram rw\0 " \
 130         "rescueboot=echo Booting rescue system ...; " \
 131                 "run rescueargs addmtd addmisc;" \
 132                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
 133                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 134                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 135                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 136                 "run boot_board_type;" \
 137                 "if bootm ${fit_addr_r}; then ; " \
 138                 "else " \
 139                         "run dead; " \
 140                 "fi; \0" \
 141         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
 142                 "\\\\${bootargs} " \
 143         "rescueReason=18\0 " \
 144         "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
 145         "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
 146         "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
 147                 "${rescue_fit_file}\0" \
 148         "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
 149                 "${rescue_fit_file}\0" \
 150         "usbroot=/dev/sda1 rootwait rw\0" \
 151         "usbboot=echo Booting from usb-stick ...; " \
 152                 "run usbargs addmtd addmisc;" \
 153                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 154                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 155                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 156                 "run boot_board_type;" \
 157                 "bootm ${fit_addr_r}\0" \
 158         "usbargs=setenv bootargs console=${console},${baudrate} " \
 159                 "root=${usbroot}\0" \
 160         "mmc_rescue_boot=" \
 161                 "run r_reason_syserr;" \
 162                 "if run mmc_rescue_load_fit hab_check_file_fit; then " \
 163                         "run rescueboot; " \
 164                 "else " \
 165                         "run dead; " \
 166                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
 167                 "fi;\0" \
 168         "main_rescue_boot=" \
 169                 "if run main_load_fit hab_check_flash_fit; then " \
 170                         "if run mainboot; then ; " \
 171                         "else " \
 172                                 "run r_reason_syserr;" \
 173                                 "if run rescue_load_fit hab_check_file_fit;" \
 174                                         "then run rescueboot; " \
 175                                 "else " \
 176                                         "run dead; " \
 177                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
 178                                 "fi; " \
 179                         "fi; " \
 180                 "else " \
 181                         "run r_reason_syserr;" \
 182                         "if run rescue_load_fit hab_check_file_fit; then " \
 183                                 "run rescueboot; " \
 184                         "else " \
 185                                 "run dead; " \
 186                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 187                         "fi; " \
 188                 "fi;\0" \
 189         "usb_mmc_rescue_boot=" \
 190                 "usb start;" \
 191                 "if usb storage; then " \
 192                         "if run loadbootscriptUSB " \
 193                                 "hab_check_file_bootscript;" \
 194                                 "then run bootscriptUSB; " \
 195                         "fi; " \
 196                         "if run loadbootscriptUSBf " \
 197                                 "hab_check_file_bootscript;" \
 198                                 "then run bootscriptUSB; " \
 199                         "fi; " \
 200                         "if run usb_load_fit hab_check_file_fit; then " \
 201                                 "run usbboot; " \
 202                         "fi; " \
 203                         "if run usb_load_fitf hab_check_file_fit; then " \
 204                                 "run usbboot; " \
 205                         "fi; "\
 206                         "if run usb_load_rescuefit hab_check_file_fit;" \
 207                                 "then run r_reason_syserr rescueboot;" \
 208                         "fi; " \
 209                         "if run usb_load_rescuefitf hab_check_file_fit;" \
 210                                 "then run r_reason_syserr rescueboot;" \
 211                         "fi; " \
 212                         "run mmc_rescue_boot;" \
 213                 "fi; "\
 214                 "run mmc_rescue_boot;\0" \
 215         "rescue_xload_boot=" \
 216                 "run r_reason_syserr;" \
 217                 "if test ${bootmode} -ne 0 ; then " \
 218                         "mmc dev ${mmcdev};" \
 219                         "if mmc rescan; then " \
 220                                 "if run mmc_rescue_load_fit " \
 221                                         "hab_check_file_fit; then " \
 222                                         "run rescueboot; " \
 223                                 "else " \
 224                                         "usb start;" \
 225                                         "if usb storage; then " \
 226                                                 "if run usb_load_rescuefit " \
 227                                                         "hab_check_file_fit;"\
 228                                                         "then " \
 229                                                         "run rescueboot;" \
 230                                                 "fi; " \
 231                                                 "if run usb_load_rescuefitf "\
 232                                                         "hab_check_file_fit;"\
 233                                                         "then " \
 234                                                         "run rescueboot;" \
 235                                                 "fi; " \
 236                                         "fi;" \
 237                                 "fi;" \
 238                                 "run dead; " \
 239                                 "echo RESCUE SYSTEM ON SD OR " \
 240                                         "USB BOOT FAILURE;" \
 241                         "else " \
 242                                 "usb start;" \
 243                                 "if usb storage; then " \
 244                                         "if run usb_load_rescuefit " \
 245                                                 "hab_check_file_fit; then " \
 246                                                 "run rescueboot;" \
 247                                         "fi; " \
 248                                         "if run usb_load_rescuefitf " \
 249                                                 "hab_check_file_fit; then " \
 250                                                 "run rescueboot;" \
 251                                         "fi; " \
 252                                 "fi;" \
 253                                 "run dead; " \
 254                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
 255                         "fi; " \
 256                 "else "\
 257                         "if run rescue_load_fit hab_check_file_fit; then " \
 258                                 "run rescueboot; " \
 259                         "else " \
 260                                 "run dead; " \
 261                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
 262                         "fi; " \
 263                 "fi;\0" \
 264         "ari_boot=if test ${bootmode} -ne 0 ; then " \
 265                 "mmc dev ${mmcdev};" \
 266                 "if mmc rescan; then " \
 267                         "if run loadbootscript hab_check_file_bootscript;" \
 268                                 "then run bootscript; " \
 269                         "fi; " \
 270                         "if run mmc_load_fit hab_check_file_fit; then " \
 271                                 "if run mmcboot; then ; " \
 272                                 "else " \
 273                                         "run mmc_rescue_boot;" \
 274                                 "fi; " \
 275                         "else " \
 276                                 "run usb_mmc_rescue_boot;" \
 277                         "fi; " \
 278                 "else " \
 279                         "run usb_mmc_rescue_boot;" \
 280                 "fi; " \
 281         "else "\
 282                 "run main_rescue_boot;" \
 283         "fi; \0"\
 284         CONFIG_EXTRA_ENV_BOARD_SETTINGS
 285
 286 #define CONFIG_ARP_TIMEOUT              200UL
 287
 288 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 289 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
 290 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 291
 292 /* Physical Memory Map */
 293 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 294
 295 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 296 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 297 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 298
 299 #define CONFIG_SYS_INIT_SP_OFFSET \
 300         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 301 #define CONFIG_SYS_INIT_SP_ADDR \
 302         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 303
 304 #define CONFIG_SYS_FSL_USDHC_NUM        2
 305
 306 /* NAND stuff */
 307 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 308 #define CONFIG_SYS_NAND_BASE            0x40000000
 309 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 310 #define CONFIG_SYS_NAND_ONFI_DETECTION
 311
 312 /* DMA stuff, needed for GPMI/MXS NAND support */
 313
 314 /* USB Configs */
 315 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 316 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 317 #define CONFIG_MXC_USB_FLAGS    0
 318
 319 /* UBI support */
 320
 321 /* Framebuffer */
 322 /* check this console not needed, after test remove it */
 323 #define CONFIG_SPLASH_SCREEN
 324 #define CONFIG_SPLASH_SCREEN_ALIGN
 325 #define CONFIG_IMX_VIDEO_SKIP
 326 #define CONFIG_VIDEO_LOGO
 327 #define CONFIG_VIDEO_BMP_LOGO
 328 #define CONFIG_BMP_16BPP
 329 #define CONFIG_VIDEO_BMP_RLE8
 330
 331 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 332
 333 #endif                         /* __ARISTAINETOS2_CONFIG_H */