socfpga: implement arria V socdk SPI flash config in dts
[oweals/u-boot.git] / include / configs / aristainetos.h
1 /*
2  * (C) Copyright 2015
3  * (C) Copyright 2014
4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
8  *
9  * Configuration settings for the Freescale i.MX6Q SabreSD board.
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13 #ifndef __ARISTAINETOS_CONFIG_H
14 #define __ARISTAINETOS_CONFIG_H
15
16 #define CONFIG_MX6
17
18 #include "mx6_common.h"
19 #include <linux/sizes.h>
20
21 #define CONFIG_DISPLAY_CPUINFO
22 #define CONFIG_DISPLAY_BOARDINFO
23
24 #include <asm/arch/imx-regs.h>
25 #include <asm/imx-common/gpio.h>
26
27 #define CONFIG_MACH_TYPE        4501
28 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
29 #define CONFIG_HOSTNAME         aristainetos
30 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
31
32 #define CONFIG_SYS_GENERIC_BOARD
33
34 /* Size of malloc() pool */
35 #define CONFIG_SYS_MALLOC_LEN           (64 * SZ_1M)
36
37 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_MXC_GPIO
39
40 #define CONFIG_MXC_UART
41 #define CONFIG_MXC_UART_BASE    UART5_BASE
42 #define CONFIG_CONSOLE_DEV      "ttymxc4"
43
44 #define CONFIG_CMD_FUSE
45 #define CONFIG_MXC_OCOTP
46
47 /* MMC Configs */
48 #define CONFIG_FSL_ESDHC
49 #define CONFIG_FSL_USDHC
50 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
51
52 #define CONFIG_MMC
53 #define CONFIG_CMD_MMC
54 #define CONFIG_GENERIC_MMC
55 #define CONFIG_BOUNCE_BUFFER
56 #define CONFIG_CMD_EXT2
57 #define CONFIG_CMD_FAT
58 #define CONFIG_DOS_PARTITION
59
60 #define CONFIG_CMD_PING
61 #define CONFIG_CMD_DHCP
62 #define CONFIG_CMD_MII
63 #define CONFIG_CMD_NET
64 #define CONFIG_FEC_MXC
65 #define CONFIG_MII
66 #define IMX_FEC_BASE                    ENET_BASE_ADDR
67 #define CONFIG_FEC_XCV_TYPE             RMII
68 #define CONFIG_ETHPRIME                 "FEC"
69 #define CONFIG_FEC_MXC_PHYADDR          0
70
71 #define CONFIG_PHYLIB
72 #define CONFIG_PHY_MICREL
73
74 #define CONFIG_CMD_SF
75 #define CONFIG_SPI_FLASH
76 #define CONFIG_SPI_FLASH_MTD
77 #define CONFIG_SPI_FLASH_STMICRO
78 #define CONFIG_MXC_SPI
79 #define CONFIG_SF_DEFAULT_BUS           3
80 #define CONFIG_SF_DEFAULT_CS            0
81 #define CONFIG_SF_DEFAULT_SPEED         20000000
82 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
83 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
84 /* allow to overwrite serial and ethaddr */
85 #define CONFIG_ENV_OVERWRITE
86 #define CONFIG_CONS_INDEX               1
87 #define CONFIG_BAUDRATE                 115200
88
89 /* Command definition */
90 #include <config_cmd_default.h>
91
92 #define CONFIG_CMD_BMODE
93 #define CONFIG_CMD_BOOTZ
94 #define CONFIG_CMD_SETEXPR
95 #undef CONFIG_CMD_IMLS
96
97 #define CONFIG_BOOTDELAY                3
98
99 #define CONFIG_LOADADDR                 0x12000000
100 #define CONFIG_SYS_TEXT_BASE            0x17800000
101
102 #define CONFIG_EXTRA_ENV_SETTINGS \
103         "script=u-boot.scr\0" \
104         "fit_file=/boot/system.itb\0" \
105         "loadaddr=0x12000000\0" \
106         "fit_addr_r=0x14000000\0" \
107         "uboot=/boot/u-boot.imx\0" \
108         "uboot_sz=d0000\0" \
109         "rescue_sys_addr=f0000\0" \
110         "rescue_sys_length=f10000\0" \
111         "board_type=aristainetos7@1\0" \
112         "panel=lb07wv8\0" \
113         "splashpos=m,m\0" \
114         "console=" CONFIG_CONSOLE_DEV "\0" \
115         "fdt_high=0xffffffff\0"   \
116         "initrd_high=0xffffffff\0" \
117         "mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \
118         "mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \
119                 "-(rescue-system);gpmi-nand:-(ubi)\0" \
120         "addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \
121         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
122         "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
123                 "default ${board_type}\0" \
124         "get_env=mw ${loadaddr} 0 0x20000;" \
125                 "mmc rescan;" \
126                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
127                 "env import -t ${loadaddr}\0" \
128         "default_env=mw ${loadaddr} 0 0x20000;" \
129                 "env export -t ${loadaddr} serial# ethaddr eth1addr " \
130                 "board_type panel;" \
131                 "env default -a;" \
132                 "env import -t ${loadaddr}\0" \
133         "loadbootscript=" \
134                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
135         "bootscript=echo Running bootscript from mmc ...; " \
136                 "source\0" \
137         "mmcpart=1\0" \
138         "mmcdev=0\0" \
139         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
140         "mmcargs=setenv bootargs console=${console},${baudrate} " \
141                 "root=${mmcroot}\0" \
142         "mmcboot=echo Booting from mmc ...; " \
143                 "run mmcargs addmtd addmisc set_fit_default;" \
144                 "bootm ${fit_addr_r}\0" \
145         "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
146                 "${fit_file}\0" \
147         "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
148                 "${uboot}\0" \
149         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
150                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
151                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
152                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
153                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
154                 "sf write ${loadaddr} 400 ${filesize};" \
155                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
156                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
157         "ubiargs=setenv bootargs console=${console},${baudrate} " \
158                 "ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \
159         "ubiboot=echo Booting from ubi ...; " \
160                 "run ubiargs addmtd addmisc set_fit_default;" \
161                 "bootm ${fit_addr_r}\0" \
162         "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
163                 "ubifsload ${fit_addr_r} /boot/system.itb; " \
164                 "imi ${fit_addr_r}\0 " \
165         "rescueargs=setenv bootargs console=${console},${baudrate} " \
166                 "root=/dev/ram rw\0 " \
167         "rescueboot=echo Booting rescue system from NOR ...; " \
168                 "run rescueargs addmtd addmisc set_fit_default;" \
169                 "bootm ${fit_addr_r}\0" \
170         "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
171                 "${rescue_sys_length}; imi ${fit_addr_r}\0 "
172
173 #define CONFIG_BOOTCOMMAND \
174         "mmc dev ${mmcdev};" \
175         "if mmc rescan; then " \
176                 "if run loadbootscript; then " \
177                         "run bootscript; " \
178                 "else " \
179                         "if run mmc_load_fit; then " \
180                                 "run mmcboot; " \
181                         "else " \
182                                 "if run ubifs_load_fit; then " \
183                                         "run ubiboot; " \
184                                 "else " \
185                                         "if run rescue_load_fit; then " \
186                                                 "run rescueboot; " \
187                                         "else " \
188                                                 "echo RESCUE SYSTEM BOOT " \
189                                                         "FAILURE;" \
190                                         "fi; " \
191                                 "fi; " \
192                         "fi; " \
193                 "fi; " \
194         "else " \
195                 "if run ubifs_load_fit; then " \
196                         "run ubiboot; " \
197                 "else " \
198                         "if run rescue_load_fit; then " \
199                                 "run rescueboot; " \
200                         "else " \
201                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
202                         "fi; " \
203                 "fi; " \
204         "fi"
205
206 #define CONFIG_ARP_TIMEOUT              200UL
207
208 /* Miscellaneous configurable options */
209 #define CONFIG_SYS_LONGHELP
210 #define CONFIG_SYS_HUSH_PARSER
211 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
212 #define CONFIG_AUTO_COMPLETE
213 #define CONFIG_SYS_CBSIZE               256
214
215 /* Print Buffer Size */
216 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
217 #define CONFIG_SYS_MAXARGS             16
218 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
219
220 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
221 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
222 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
223
224 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
225
226 #define CONFIG_CMDLINE_EDITING
227 #define CONFIG_STACKSIZE                (128 * 1024)
228
229 /* Physical Memory Map */
230 #define CONFIG_NR_DRAM_BANKS            1
231 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
232
233 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
234 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
235 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
236
237 #define CONFIG_SYS_INIT_SP_OFFSET \
238         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
239 #define CONFIG_SYS_INIT_SP_ADDR \
240         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
241
242 /* FLASH and environment organization */
243 #define CONFIG_SYS_NO_FLASH
244
245 #define CONFIG_ENV_SIZE                 (12 * 1024)
246 #define CONFIG_ENV_IS_IN_SPI_FLASH
247 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
248 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
249 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
250 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
251 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
252 #define CONFIG_ENV_SECT_SIZE            (0x010000)
253 #define CONFIG_ENV_OFFSET               (0x0d0000)
254 #define CONFIG_ENV_OFFSET_REDUND        (0x0e0000)
255
256 #define CONFIG_OF_LIBFDT
257
258 #define CONFIG_CMD_CACHE
259
260 #define CONFIG_SYS_FSL_USDHC_NUM        2
261
262 #define CONFIG_CMD_I2C
263 #define CONFIG_SYS_I2C
264 #define CONFIG_SYS_I2C_MXC
265 #define CONFIG_SYS_I2C_SPEED            100000
266 #define CONFIG_SYS_I2C_SLAVE            0x7f
267 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x00} }
268
269 #define CONFIG_CMD_GPIO
270 #define CONFIG_GPIO_ENABLE_SPI_FLASH    IMX_GPIO_NR(2, 15)
271
272 /* NAND stuff */
273 #define CONFIG_CMD_NAND
274 #define CONFIG_CMD_NAND_TRIMFFS
275 #define CONFIG_NAND_MXS
276 #define CONFIG_SYS_MAX_NAND_DEVICE      1
277 #define CONFIG_SYS_NAND_BASE            0x40000000
278 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
279 #define CONFIG_SYS_NAND_ONFI_DETECTION
280
281 /* DMA stuff, needed for GPMI/MXS NAND support */
282 #define CONFIG_APBH_DMA
283 #define CONFIG_APBH_DMA_BURST
284 #define CONFIG_APBH_DMA_BURST8
285
286 /* RTC */
287 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
288 #define CONFIG_SYS_RTC_BUS_NUM  2
289 #define CONFIG_RTC_M41T11
290 #define CONFIG_CMD_DATE
291
292 /* USB Configs */
293 #define CONFIG_CMD_USB
294 #define CONFIG_CMD_FAT
295 #define CONFIG_USB_EHCI
296 #define CONFIG_USB_EHCI_MX6
297 #define CONFIG_USB_STORAGE
298 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
299 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
300 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
301 #define CONFIG_MXC_USB_FLAGS    0
302
303 #define ARISTAINETOS_USB_OTG_PWR        IMX_GPIO_NR(4, 15)
304 #define ARISTAINETOS_USB_H1_PWR         IMX_GPIO_NR(3, 31)
305
306 /* UBI support */
307 #define CONFIG_CMD_MTDPARTS
308 #define CONFIG_MTD_PARTITIONS
309 #define CONFIG_MTD_DEVICE
310 #define CONFIG_RBTREE
311 #define CONFIG_LZO
312 #define CONFIG_CMD_UBI
313 #define CONFIG_CMD_UBIFS
314
315 #define CONFIG_MTD_UBI_FASTMAP
316 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT      1
317
318 #define CONFIG_HW_WATCHDOG
319 #define CONFIG_IMX_WATCHDOG
320
321 #define CONFIG_FIT
322
323 /* Framebuffer */
324 #define CONFIG_VIDEO
325 #define CONFIG_VIDEO_IPUV3
326 /* check this console not needed, after test remove it */
327 #define CONFIG_CFB_CONSOLE
328 #define CONFIG_VGA_AS_SINGLE_DEVICE
329 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
330 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
331 #define CONFIG_VIDEO_BMP_RLE8
332 #define CONFIG_SPLASH_SCREEN
333 #define CONFIG_SPLASH_SCREEN_ALIGN
334 #define CONFIG_BMP_16BPP
335 #define CONFIG_VIDEO_LOGO
336 #define CONFIG_VIDEO_BMP_LOGO
337 #define CONFIG_IPUV3_CLK 198000000
338 #define CONFIG_IMX_VIDEO_SKIP
339
340 #define CONFIG_CMD_BMP
341
342 #define CONFIG_PWM_IMX
343 #define CONFIG_IMX6_PWM_PER_CLK 66000000
344 #endif                         /* __ARISTAINETOS_CONFIG_H */