sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / apf27.h
1 /*
2  *
3  * Configuration settings for the Armadeus Project motherboard APF27
4  *
5  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
6  *
7  * SPDX-License-Identifier:    GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_VERSION_VARIABLE
14 #define CONFIG_ENV_VERSION      10
15 #define CONFIG_IDENT_STRING     " apf27 patch 3.10"
16 #define CONFIG_BOARD_NAME apf27
17
18 /*
19  * SoC configurations
20  */
21 #define CONFIG_ARM926EJS                /* this is an ARM926EJS CPU */
22 #define CONFIG_MX27                     /* in a Freescale i.MX27 Chip */
23 #define CONFIG_MACH_TYPE        1698    /* APF27 */
24 #define CONFIG_SYS_GENERIC_BOARD
25
26 /*
27  * Enable the call to miscellaneous platform dependent initialization.
28  */
29 #define CONFIG_SYS_NO_FLASH     /* to be define before <config_cmd_default.h> */
30
31 /*
32  * Board display option
33  */
34 #define CONFIG_DISPLAY_BOARDINFO
35 #define CONFIG_DISPLAY_CPUINFO
36
37 /*
38  * SPL
39  */
40 #define CONFIG_SPL
41 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
42 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
43 #define CONFIG_SPL_MAX_SIZE     2048
44 #define CONFIG_SPL_TEXT_BASE    0xA0000000
45
46 /* NAND boot config */
47 #define CONFIG_SPL_NAND_SUPPORT
48 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
49 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x800
50 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
51 #define CONFIG_SYS_NAND_U_BOOT_SIZE     CONFIG_SYS_MONITOR_LEN - 0x800
52
53 /*
54  * BOOTP options
55  */
56 #define CONFIG_BOOTP_SUBNETMASK
57 #define CONFIG_BOOTP_GATEWAY
58 #define CONFIG_BOOTP_HOSTNAME
59 #define CONFIG_BOOTP_BOOTPATH
60 #define CONFIG_BOOTP_BOOTFILESIZE
61 #define CONFIG_BOOTP_DNS
62 #define CONFIG_BOOTP_DNS2
63
64 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME
65 #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
66
67 /*
68  * U-Boot Commands
69  */
70 #include <config_cmd_default.h>
71
72 #define CONFIG_CMD_ASKENV       /* ask for env variable         */
73 #define CONFIG_CMD_BSP          /* Board Specific functions     */
74 #define CONFIG_CMD_CACHE        /* icache, dcache               */
75 #define CONFIG_CMD_DATE
76 #define CONFIG_CMD_DHCP         /* DHCP Support                 */
77 #define CONFIG_CMD_DNS
78 #define CONFIG_CMD_EEPROM
79 #define CONFIG_CMD_EXT2
80 #define CONFIG_CMD_FAT          /* FAT support                  */
81 #define CONFIG_CMD_IMX_FUSE     /* imx iim fuse                 */
82 #define CONFIG_CMD_I2C
83 #define CONFIG_CMD_MII          /* MII support                  */
84 #define CONFIG_CMD_MMC
85 #define CONFIG_CMD_MTDPARTS     /* MTD partition support        */
86 #define CONFIG_CMD_NAND         /* NAND support                 */
87 #define CONFIG_CMD_NAND_LOCK_UNLOCK
88 #define CONFIG_CMD_NAND_TRIMFFS
89 #define CONFIG_CMD_NFS          /* NFS support                  */
90 #define CONFIG_CMD_PING         /* ping support                 */
91 #define CONFIG_CMD_SETEXPR      /* setexpr support              */
92 #define CONFIG_CMD_UBI
93 #define CONFIG_CMD_UBIFS
94
95 /*
96  * Memory configurations
97  */
98 #define CONFIG_NR_DRAM_POPULATED 1
99 #define CONFIG_NR_DRAM_BANKS    2
100
101 #define ACFG_SDRAM_MBYTE_SYZE 64
102
103 #define PHYS_SDRAM_1                    0xA0000000
104 #define PHYS_SDRAM_2                    0xB0000000
105 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
106 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (512<<10))
107 #define CONFIG_SYS_MEMTEST_START        0xA0000000      /* memtest test area  */
108 #define CONFIG_SYS_MEMTEST_END          0xA0300000      /* 3 MiB RAM test */
109
110 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE  \
111                 + PHYS_SDRAM_1_SIZE - 0x0100000)
112
113 #define CONFIG_SYS_TEXT_BASE            0xA0000800
114
115 /*
116  * FLASH organization
117  */
118 #define ACFG_MONITOR_OFFSET             0x00000000
119 #define CONFIG_SYS_MONITOR_LEN          0x00100000      /* 1MiB */
120 #define CONFIG_ENV_IS_IN_NAND
121 #define CONFIG_ENV_OVERWRITE
122 #define CONFIG_ENV_OFFSET               0x00100000      /* NAND offset */
123 #define CONFIG_ENV_SIZE                 0x00020000      /* 128kB  */
124 #define CONFIG_ENV_RANGE                0X00080000      /* 512kB */
125 #define CONFIG_ENV_OFFSET_REDUND        \
126                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)  /* +512kB */
127 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE /* 512kB */
128 #define CONFIG_FIRMWARE_OFFSET          0x00200000
129 #define CONFIG_FIRMWARE_SIZE            0x00080000      /* 512kB  */
130 #define CONFIG_KERNEL_OFFSET            0x00300000
131 #define CONFIG_ROOTFS_OFFSET            0x00800000
132
133 #define CONFIG_MTDMAP                   "mxc_nand.0"
134 #define MTDIDS_DEFAULT                  "nand0=" CONFIG_MTDMAP
135 #define MTDPARTS_DEFAULT        "mtdparts=" CONFIG_MTDMAP \
136                                 ":1M(u-boot)ro," \
137                                 "512K(env)," \
138                                 "512K(env2)," \
139                                 "512K(firmware)," \
140                                 "512K(dtb)," \
141                                 "5M(kernel)," \
142                                 "-(rootfs)"
143
144 /*
145  * U-Boot general configurations
146  */
147 #define CONFIG_SYS_LONGHELP
148 #define CONFIG_SYS_PROMPT               "BIOS> "        /* prompt string */
149 #define CONFIG_SYS_CBSIZE               2048            /* console I/O buffer */
150 #define CONFIG_SYS_PBSIZE               \
151                                 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
152                                                 /* Print buffer size */
153 #define CONFIG_SYS_MAXARGS              16              /* max command args */
154 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
155                                                 /* Boot argument buffer size */
156 #define CONFIG_AUTO_COMPLETE
157 #define CONFIG_CMDLINE_EDITING
158 #define CONFIG_SYS_HUSH_PARSER                  /* enable the "hush" shell */
159 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "    /* secondary prompt string */
160 #define CONFIG_ENV_VARS_UBOOT_CONFIG
161 #define CONFIG_PREBOOT                  "run check_flash check_env;"
162
163
164 /*
165  * Boot Linux
166  */
167 #define CONFIG_CMDLINE_TAG              /* send commandline to Kernel   */
168 #define CONFIG_SETUP_MEMORY_TAGS        /* send memory definition to kernel */
169 #define CONFIG_INITRD_TAG               /* send initrd params   */
170
171 #define CONFIG_OF_LIBFDT
172
173 #define CONFIG_BOOTDELAY        5
174 #define CONFIG_ZERO_BOOTDELAY_CHECK
175 #define CONFIG_BOOTFILE         __stringify(CONFIG_BOARD_NAME) "-linux.bin"
176 #define CONFIG_BOOTARGS         "console=" __stringify(ACFG_CONSOLE_DEV) "," \
177                         __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
178                         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
179
180 #define ACFG_CONSOLE_DEV        ttySMX0
181 #define CONFIG_BOOTCOMMAND      "run ubifsboot"
182 #define CONFIG_SYS_AUTOLOAD     "no"
183 /*
184  * Default load address for user programs and kernel
185  */
186 #define CONFIG_LOADADDR                 0xA0000000
187 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
188
189 /*
190  * Extra Environments
191  */
192 #define CONFIG_EXTRA_ENV_SETTINGS \
193         "env_version="          __stringify(CONFIG_ENV_VERSION)         "\0" \
194         "consoledev="           __stringify(ACFG_CONSOLE_DEV)           "\0" \
195         "mtdparts="             MTDPARTS_DEFAULT                        "\0" \
196         "partition=nand0,6\0"                                           \
197         "u-boot_addr="          __stringify(ACFG_MONITOR_OFFSET)        "\0" \
198         "env_addr="             __stringify(CONFIG_ENV_OFFSET)          "\0" \
199         "firmware_addr="        __stringify(CONFIG_FIRMWARE_OFFSET)     "\0" \
200         "firmware_size="        __stringify(CONFIG_FIRMWARE_SIZE)       "\0" \
201         "kernel_addr="          __stringify(CONFIG_KERNEL_OFFSET)       "\0" \
202         "rootfs_addr="          __stringify(CONFIG_ROOTFS_OFFSET)       "\0" \
203         "board_name="           __stringify(CONFIG_BOARD_NAME)          "\0" \
204         "kernel_addr_r=A0000000\0" \
205         "check_env=if test -n ${flash_env_version}; "                   \
206                 "then env default env_version; "                        \
207                 "else env set flash_env_version ${env_version}; env save; "\
208                 "fi; "                                                  \
209                 "if itest ${flash_env_version} < ${env_version}; then " \
210                         "echo \"*** Warning - Environment version"      \
211                         " change suggests: run flash_reset_env; reset\"; "\
212                         "env default flash_reset_env; "\
213                 "fi; \0"                                                \
214         "check_flash=nand lock; nand unlock ${env_addr}; \0"    \
215         "flash_reset_env=env default -f -a; saveenv; run update_env;"   \
216                 "echo Flash environment variables erased!\0"            \
217         "download_uboot=tftpboot ${loadaddr} ${board_name}"             \
218                 "-u-boot-with-spl.bin\0"                                \
219         "flash_uboot=nand unlock ${u-boot_addr} ;"                      \
220                 "nand erase.part u-boot;"               \
221                 "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
222                         "then nand lock; nand unlock ${env_addr};"      \
223                                 "echo Flashing of uboot succeed;"       \
224                         "else echo Flashing of uboot failed;"           \
225                 "fi; \0"                                                \
226         "update_uboot=run download_uboot flash_uboot\0"                 \
227         "download_env=tftpboot ${loadaddr} ${board_name}"               \
228                 "-u-boot-env.txt\0"                             \
229         "flash_env=env import -t ${loadaddr}; env save; \0"             \
230         "update_env=run download_env flash_env\0"                       \
231         "update_all=run update_env update_uboot\0"                      \
232         "unlock_regs=mw 10000008 0; mw 10020008 0\0"                    \
233
234 /*
235  * Serial Driver
236  */
237 #define CONFIG_MXC_UART
238 #define CONFIG_CONS_INDEX               1
239 #define CONFIG_BAUDRATE                 115200
240 #define CONFIG_MXC_UART_BASE            UART1_BASE
241
242 /*
243  * GPIO
244  */
245 #define CONFIG_MXC_GPIO
246
247 /*
248  * NOR
249  */
250
251 /*
252  * NAND
253  */
254 #define CONFIG_NAND_MXC
255
256 #define CONFIG_MXC_NAND_REGS_BASE       0xD8000000
257 #define CONFIG_SYS_NAND_BASE            CONFIG_MXC_NAND_REGS_BASE
258 #define CONFIG_SYS_MAX_NAND_DEVICE      1
259
260 #define CONFIG_MXC_NAND_HWECC
261 #define CONFIG_SYS_NAND_LARGEPAGE
262 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
263 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
264 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
265 #define CONFIG_SYS_NAND_PAGE_COUNT      CONFIG_SYS_NAND_BLOCK_SIZE / \
266                                                 CONFIG_SYS_NAND_PAGE_SIZE
267 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
268 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   11
269 #define NAND_MAX_CHIPS                  1
270
271 #define CONFIG_FLASH_SHOW_PROGRESS      45
272 #define CONFIG_SYS_NAND_QUIET           1
273
274 /*
275  * Partitions & Filsystems
276  */
277 #define CONFIG_MTD_DEVICE
278 #define CONFIG_MTD_PARTITIONS
279 #define CONFIG_DOS_PARTITION
280 #define CONFIG_SUPPORT_VFAT
281
282 /*
283  * UBIFS
284  */
285 #define CONFIG_RBTREE
286 #define CONFIG_LZO
287
288 /*
289  * Ethernet (on SOC imx FEC)
290  */
291 #define CONFIG_FEC_MXC
292 #define CONFIG_FEC_MXC_PHYADDR          0x1f
293 #define CONFIG_MII                              /* MII PHY management   */
294
295 /*
296  * FPGA
297  */
298 #ifndef CONFIG_SPL_BUILD
299 #define CONFIG_FPGA
300 #endif
301 #define CONFIG_FPGA_COUNT               1
302 #define CONFIG_FPGA_XILINX
303 #define CONFIG_FPGA_SPARTAN3
304 #define CONFIG_SYS_FPGA_WAIT            250 /* 250 ms */
305 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
306 #define CONFIG_SYS_FPGA_CHECK_CTRLC
307 #define CONFIG_SYS_FPGA_CHECK_ERROR
308
309 /*
310  * Fuses - IIM
311  */
312 #ifdef CONFIG_CMD_IMX_FUSE
313 #define IIM_MAC_BANK            0
314 #define IIM_MAC_ROW             5
315 #define IIM0_SCC_KEY            11
316 #define IIM1_SUID               1
317 #endif
318
319 /*
320  * I2C
321  */
322
323 #ifdef CONFIG_CMD_I2C
324 #define CONFIG_SYS_I2C
325 #define CONFIG_SYS_I2C_MXC
326 #define CONFIG_SYS_MXC_I2C1_SPEED       100000  /* 100 kHz */
327 #define CONFIG_SYS_MXC_I2C1_SLAVE       0x7F
328 #define CONFIG_SYS_MXC_I2C2_SPEED       100000  /* 100 kHz */
329 #define CONFIG_SYS_MXC_I2C2_SLAVE       0x7F
330 #define CONFIG_SYS_I2C_NOPROBES         { }
331
332 #ifdef CONFIG_CMD_EEPROM
333 # define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM 24LC02 */
334 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* bytes of address */
335 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
336 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* msec */
337 #endif /* CONFIG_CMD_EEPROM */
338 #endif /* CONFIG_CMD_I2C */
339
340 /*
341  * SD/MMC
342  */
343 #ifdef CONFIG_CMD_MMC
344 #define CONFIG_MMC
345 #define CONFIG_GENERIC_MMC
346 #define CONFIG_MXC_MMC
347 #define CONFIG_MXC_MCI_REGS_BASE        0x10014000
348 #endif
349
350 /*
351  * RTC
352  */
353 #ifdef CONFIG_CMD_DATE
354 #define CONFIG_RTC_DS1374
355 #define CONFIG_SYS_RTC_BUS_NUM          0
356 #endif /* CONFIG_CMD_DATE */
357
358 /*
359  * PLL
360  *
361  *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
362  *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
363  */
364 #define CONFIG_MX27_CLK32               32768   /* 32768 or 32000 Hz crystal */
365
366 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
367 /* micron 64MB */
368 #define PHYS_SDRAM_1_SIZE                       0x04000000 /* 64 MB */
369 #define PHYS_SDRAM_2_SIZE                       0x04000000 /* 64 MB */
370 #endif
371
372 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
373 /* micron 128MB */
374 #define PHYS_SDRAM_1_SIZE                       0x08000000 /* 128 MB */
375 #define PHYS_SDRAM_2_SIZE                       0x08000000 /* 128 MB */
376 #endif
377
378 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
379 /* micron 256MB */
380 #define PHYS_SDRAM_1_SIZE                       0x10000000 /* 256 MB */
381 #define PHYS_SDRAM_2_SIZE                       0x10000000 /* 256 MB */
382 #endif
383
384 #endif /* __CONFIG_H */