ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / apalis_imx6.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2013-2015 Toradex, Inc.
4  *
5  * Configuration settings for the Toradex Apalis iMX6
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include "mx6_common.h"
12
13 #undef CONFIG_DISPLAY_BOARDINFO
14
15 #define CONFIG_MACH_TYPE                4886
16
17 #include <asm/arch/imx-regs.h>
18 #include <asm/mach-imx/gpio.h>
19
20 #ifdef CONFIG_SPL
21 #include "imx6_spl.h"
22 #endif
23
24 #define CONFIG_CMDLINE_TAG
25 #define CONFIG_SETUP_MEMORY_TAGS
26 #define CONFIG_INITRD_TAG
27 #define CONFIG_REVISION_TAG
28 #define CONFIG_SERIAL_TAG
29
30 /* Size of malloc() pool */
31 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
32
33 #define CONFIG_MXC_UART
34 #define CONFIG_MXC_UART_BASE            UART1_BASE
35
36 /* I2C Configs */
37 #define CONFIG_SYS_I2C
38 #define CONFIG_SYS_I2C_MXC
39 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
40 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
41 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
42 #define CONFIG_SYS_I2C_SPEED            100000
43
44 /* OCOTP Configs */
45 #ifdef CONFIG_CMD_FUSE
46 #define CONFIG_MXC_OCOTP
47 #endif
48
49 /* MMC Configs */
50 #define CONFIG_FSL_USDHC
51 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
52 #define CONFIG_SYS_FSL_USDHC_NUM        3
53
54 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
55
56 /*
57  * SATA Configs
58  */
59 #ifdef CONFIG_CMD_SATA
60 #define CONFIG_SYS_SATA_MAX_DEVICE      1
61 #define CONFIG_DWC_AHSATA_PORT_ID       0
62 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
63 #define CONFIG_LBA48
64 #endif
65
66 /* Network */
67 #define CONFIG_FEC_MXC
68 #define IMX_FEC_BASE                    ENET_BASE_ADDR
69 #define CONFIG_FEC_XCV_TYPE             RGMII
70 #define CONFIG_ETHPRIME                 "FEC"
71 #define CONFIG_FEC_MXC_PHYADDR          6
72 #define CONFIG_IP_DEFRAG
73 #define CONFIG_TFTP_BLOCKSIZE           4096
74 #define CONFIG_TFTP_TSIZE
75
76 /* USB Configs */
77 /* Host */
78 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
79 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
80 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
81 #define CONFIG_MXC_USB_FLAGS            0
82 /* Client */
83 #define CONFIG_USBD_HS
84
85 #define CONFIG_USB_GADGET_MASS_STORAGE
86 /* USB DFU */
87 #define CONFIG_DFU_MMC
88
89 /* Miscellaneous commands */
90
91 /* Framebuffer and LCD */
92 #define CONFIG_VIDEO_IPUV3
93 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
94 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
95 #define CONFIG_VIDEO_BMP_RLE8
96 #define CONFIG_SPLASH_SCREEN
97 #define CONFIG_SPLASH_SCREEN_ALIGN
98 #define CONFIG_BMP_16BPP
99 #define CONFIG_VIDEO_LOGO
100 #define CONFIG_VIDEO_BMP_LOGO
101 #define CONFIG_CONSOLE_MUX
102 #define CONFIG_IMX_HDMI
103 #define CONFIG_IMX_VIDEO_SKIP
104
105 /* allow to overwrite serial and ethaddr */
106 #define CONFIG_ENV_OVERWRITE
107
108 /* Command definition */
109 #undef CONFIG_CMD_LOADB
110 #undef CONFIG_CMD_LOADS
111 #undef CONFIG_CMD_NFS
112 #undef CONFIG_CMD_FLASH
113
114 #undef CONFIG_IPADDR
115 #define CONFIG_IPADDR                   192.168.10.2
116 #define CONFIG_NETMASK                  255.255.255.0
117 #undef CONFIG_SERVERIP
118 #define CONFIG_SERVERIP                 192.168.10.1
119
120 #define CONFIG_LOADADDR                 0x12000000
121
122 #ifdef CONFIG_CMD_SATA
123 #define CONFIG_DRIVE_SATA "sata "
124 #else
125 #define CONFIG_DRIVE_SATA
126 #endif
127
128 #ifdef CONFIG_CMD_MMC
129 #define CONFIG_DRIVE_MMC "mmc "
130 #else
131 #define CONFIG_DRIVE_MMC
132 #endif
133
134 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
135
136 #define DFU_ALT_EMMC_INFO \
137         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
138         "boot part 0 1;" \
139         "rootfs part 0 2;" \
140         "uImage fat 0 1;" \
141         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
142         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
143
144 #define EMMC_BOOTCMD \
145         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
146                 "rootwait\0" \
147         "emmcboot=run setup; " \
148                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
149                 "${vidargs}; echo Booting from internal eMMC chip...; " \
150                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
151                 "${boot_file} && run fdt_fixup && " \
152                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
153         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
154                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
155
156 #define MEM_LAYOUT_ENV_SETTINGS \
157         "bootm_size=0x20000000\0" \
158         "fdt_addr_r=0x12000000\0" \
159         "fdt_high=0xffffffff\0" \
160         "initrd_high=0xffffffff\0" \
161         "kernel_addr_r=0x11000000\0" \
162         "ramdisk_addr_r=0x12100000\0"
163
164 #define NFS_BOOTCMD \
165         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
166         "nfsboot=run setup; " \
167                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
168                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
169                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
170                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
171         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
172                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
173
174 #define SD_BOOTCMD                                              \
175         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
176                 "rootwait\0" \
177         "sdboot=run setup; " \
178                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
179                 "${vidargs}; echo Booting from SD card; " \
180                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
181                 "${boot_file} && run fdt_fixup && " \
182                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
183         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
184                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
185
186 #define USB_BOOTCMD \
187         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
188                 "rootwait\0" \
189         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
190                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
191                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
192                 "${boot_file} && run fdt_fixup && " \
193                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
194         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
195                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
196
197 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
198 #define FDT_FILE "imx6q-apalis-eval.dtb"
199 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
200 #else
201 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
202 #endif
203 #define CONFIG_EXTRA_ENV_SETTINGS \
204         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
205                 "run nfsboot ; echo ; echo nfsboot failed ; " \
206                 "usb start ;" \
207                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
208         "boot_file=uImage\0" \
209         "console=ttymxc0\0" \
210         "defargs=enable_wait_mode=off vmalloc=400M\0" \
211         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
212         EMMC_BOOTCMD \
213         "fdt_file=" FDT_FILE "\0" \
214         "fdt_fixup=;\0" \
215         MEM_LAYOUT_ENV_SETTINGS \
216         NFS_BOOTCMD \
217         SD_BOOTCMD \
218         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
219                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
220                 "flash_eth.img && source ${loadaddr}\0" \
221         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
222                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
223                 "source ${loadaddr}\0" \
224         "setup=setenv setupargs fec_mac=${ethaddr} " \
225                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
226                 "console=${console},${baudrate}n8\0 " \
227         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
228         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
229                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
230                 "source ${loadaddr}\0" \
231         "splashpos=m,m\0" \
232         "vidargs=mxc_hdmi.only_cea=1 " \
233                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
234                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
235                 "fbmem=32M\0 "
236
237 /* Miscellaneous configurable options */
238 #undef CONFIG_SYS_CBSIZE
239 #define CONFIG_SYS_CBSIZE               1024
240 #undef CONFIG_SYS_MAXARGS
241 #define CONFIG_SYS_MAXARGS              48
242
243 #define CONFIG_SYS_MEMTEST_START        0x10000000
244 #define CONFIG_SYS_MEMTEST_END          0x10010000
245 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
246
247 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
248
249 /* Physical Memory Map */
250 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
251
252 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
253 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
254 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
255
256 #define CONFIG_SYS_INIT_SP_OFFSET \
257         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
258 #define CONFIG_SYS_INIT_SP_ADDR \
259         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
260
261 /* environment organization */
262
263 #define CONFIG_ENV_SIZE                 (8 * 1024)
264
265 #if defined(CONFIG_ENV_IS_IN_MMC)
266 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
267 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
268                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
269 #define CONFIG_SYS_MMC_ENV_DEV          0
270 #define CONFIG_SYS_MMC_ENV_PART         1
271 #endif
272
273 #define CONFIG_OF_SYSTEM_SETUP
274
275 #define CONFIG_CMD_TIME
276
277 #endif  /* __CONFIG_H */