1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Sysam AMCORE board configuration
5 * (C) Copyright 2016 Angelo Dureghello <angelo@sysam.it>
8 #ifndef __AMCORE_CONFIG_H
9 #define __AMCORE_CONFIG_H
11 #define CONFIG_HOSTNAME "AMCORE"
14 #define CONFIG_MCFUART
15 #define CONFIG_SYS_UART_PORT 0
16 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
18 #define CONFIG_BOOTCOMMAND "bootm ffc20000"
19 #define CONFIG_EXTRA_ENV_SETTINGS \
20 "upgrade_uboot=loady; " \
21 "protect off 0xffc00000 0xffc1ffff; " \
22 "erase 0xffc00000 0xffc1ffff; " \
23 "cp.b 0x20000 0xffc00000 ${filesize}\0" \
24 "upgrade_kernel=loady; " \
25 "erase 0xffc20000 0xffefffff; " \
26 "cp.b 0x20000 0xffc20000 ${filesize}\0" \
27 "upgrade_jffs2=loady; " \
28 "erase 0xfff00000 0xffffffff; " \
29 "cp.b 0x20000 0xfff00000 ${filesize}\0"
31 /* undef to save memory */
33 #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
35 #define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */
37 #define CONFIG_SYS_MEMTEST_START 0x0
38 #define CONFIG_SYS_MEMTEST_END 0x1000000
40 #define CONFIG_SYS_HZ 1000
42 #define CONFIG_SYS_CLK 45000000
43 #define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2)
44 /* Register Base Addrs */
45 #define CONFIG_SYS_MBAR 0x10000000
46 /* Definitions for initial stack pointer and data area (in DPRAM) */
47 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
48 /* size of internal SRAM */
49 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
50 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
51 GENERATED_GBL_DATA_SIZE)
52 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
54 #define CONFIG_SYS_SDRAM_BASE 0x00000000
55 #define CONFIG_SYS_SDRAM_SIZE 0x1000000
56 #define CONFIG_SYS_FLASH_BASE 0xffc00000
57 #define CONFIG_SYS_MAX_FLASH_BANKS 1
58 #define CONFIG_SYS_MAX_FLASH_SECT 1024
59 #define CONFIG_SYS_FLASH_ERASE_TOUT 1000
61 #define CONFIG_SYS_FLASH_CFI
62 #define CONFIG_FLASH_CFI_DRIVER
63 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
64 /* amcore design has flash data bytes wired swapped */
65 #define CONFIG_SYS_WRITE_SWAPPED_DATA
67 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
68 #define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024)
69 #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
70 #define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
72 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
73 CONFIG_SYS_MONITOR_LEN)
74 #define CONFIG_ENV_SIZE 0x1000
75 #define CONFIG_ENV_SECT_SIZE 0x1000
77 #define LDS_BOARD_TEXT \
78 . = DEFINED(env_offset) ? env_offset : .; \
79 env/embedded.o(.text*);
81 /* memory map space for linux boot data */
82 #define CONFIG_SYS_BOOTMAPSZ (8 << 20)
87 * Special 8K version 3 core cache.
88 * This is a single unified instruction/data cache.
89 * sdram - single region - no masks
91 #define CONFIG_SYS_CACHELINE_SIZE 16
93 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
94 CONFIG_SYS_INIT_RAM_SIZE - 8)
95 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
96 CONFIG_SYS_INIT_RAM_SIZE - 4)
97 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
98 #define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \
100 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \
103 /* CS0 - AMD Flash, address 0xffc00000 */
104 #define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16)
105 /* 4MB, AA=0,V=1 C/I BIT for errata */
106 #define CONFIG_SYS_CS0_MASK 0x003f0001
107 /* WS=10, AA=1, PS=16bit (10) */
108 #define CONFIG_SYS_CS0_CTRL 0x1980
109 /* CS1 - DM9000 Ethernet Controller, address 0x30000000 */
110 #define CONFIG_SYS_CS1_BASE 0x3000
111 #define CONFIG_SYS_CS1_MASK 0x00070001
112 #define CONFIG_SYS_CS1_CTRL 0x0100
114 #endif /* __AMCORE_CONFIG_H */