2 * am3517_evm.h - Default configuration for AM3517 EVM board.
4 * Author: Vaibhav Hiremath <hvaibhav@ti.com>
6 * Based on omap3_evm_config.h
8 * Copyright (C) 2010 Texas Instruments Incorporated
10 * SPDX-License-Identifier: GPL-2.0+
17 * High Level Configuration Options
19 #define CONFIG_OMAP 1 /* in a TI OMAP core */
20 #define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */
21 #define CONFIG_OMAP_COMMON
22 #define CONFIG_SYS_GENERIC_BOARD
23 /* Common ARM Erratas */
24 #define CONFIG_ARM_ERRATA_454179
25 #define CONFIG_ARM_ERRATA_430973
26 #define CONFIG_ARM_ERRATA_621766
28 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */
30 #include <asm/arch/cpu.h> /* get chip and board defs */
31 #include <asm/arch/omap.h>
34 * Display CPU and Board information
36 #define CONFIG_DISPLAY_CPUINFO 1
37 #define CONFIG_DISPLAY_BOARDINFO 1
40 #define V_OSCK 26000000 /* Clock output from T2 */
41 #define V_SCLK (V_OSCK >> 1)
43 #define CONFIG_MISC_INIT_R
45 #define CONFIG_OF_LIBFDT
47 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
48 #define CONFIG_SETUP_MEMORY_TAGS 1
49 #define CONFIG_INITRD_TAG 1
50 #define CONFIG_REVISION_TAG 1
53 * Size of malloc() pool
55 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
56 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
60 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
67 * OMAP GPIO configuration
69 #define CONFIG_OMAP_GPIO
72 * NS16550 Configuration
74 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
76 #define CONFIG_SYS_NS16550
77 #define CONFIG_SYS_NS16550_SERIAL
78 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
79 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
82 * select serial console configuration
84 #define CONFIG_CONS_INDEX 3
85 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
86 #define CONFIG_SERIAL3 3 /* UART3 on AM3517 EVM */
88 /* allow to overwrite serial and ethaddr */
89 #define CONFIG_ENV_OVERWRITE
90 #define CONFIG_BAUDRATE 115200
91 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
94 #define CONFIG_GENERIC_MMC 1
95 #define CONFIG_OMAP_HSMMC 1
96 #define CONFIG_DOS_PARTITION 1
100 * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
101 * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
103 #define CONFIG_USB_MUSB_AM35X
104 #define CONFIG_USB_MUSB_HOST
105 #define CONFIG_USB_MUSB_PIO_ONLY
107 #ifdef CONFIG_USB_MUSB_AM35X
109 #ifdef CONFIG_USB_MUSB_HOST
110 #define CONFIG_CMD_USB
112 #define CONFIG_USB_STORAGE
113 #define CONGIG_CMD_STORAGE
114 #define CONFIG_CMD_FAT
116 #ifdef CONFIG_USB_KEYBOARD
117 #define CONFIG_SYS_USB_EVENT_POLL
118 #define CONFIG_PREBOOT "usb start"
119 #endif /* CONFIG_USB_KEYBOARD */
121 #endif /* CONFIG_USB_MUSB_HOST */
123 #ifdef CONFIG_USB_MUSB_GADGET
124 #define CONFIG_USB_GADGET_DUALSPEED
125 #define CONFIG_USB_ETHER
126 #define CONFIG_USB_ETH_RNDIS
127 #endif /* CONFIG_USB_MUSB_GADGET */
129 #endif /* CONFIG_USB_MUSB_AM35X */
131 /* commands to include */
132 #define CONFIG_CMD_EXT2 /* EXT2 Support */
133 #define CONFIG_CMD_FAT /* FAT support */
134 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */
136 #define CONFIG_CMD_I2C /* I2C serial bus support */
137 #define CONFIG_CMD_MMC /* MMC support */
138 #define CONFIG_CMD_NAND /* NAND support */
139 #define CONFIG_CMD_DHCP
140 #undef CONFIG_CMD_PING
143 #define CONFIG_SYS_NO_FLASH
144 #define CONFIG_SYS_I2C
145 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
146 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
147 #define CONFIG_SYS_I2C_OMAP34XX
152 #define CONFIG_DRIVER_TI_EMAC
153 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
155 #define CONFIG_BOOTP_DEFAULT
156 #define CONFIG_BOOTP_DNS
157 #define CONFIG_BOOTP_DNS2
158 #define CONFIG_BOOTP_SEND_HOSTNAME
159 #define CONFIG_NET_RETRY_COUNT 10
164 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
166 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
170 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
172 #define CONFIG_JFFS2_NAND
173 /* nand device jffs2 lives on */
174 #define CONFIG_JFFS2_DEV "nand0"
175 /* start of jffs2 partition */
176 #define CONFIG_JFFS2_PART_OFFSET 0x680000
177 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
179 /* Environment information */
180 #define CONFIG_BOOTDELAY 10
182 #define CONFIG_BOOTFILE "uImage"
184 #define CONFIG_EXTRA_ENV_SETTINGS \
185 "loadaddr=0x82000000\0" \
186 "console=ttyO2,115200n8\0" \
188 "mmcargs=setenv bootargs console=${console} " \
189 "root=/dev/mmcblk0p2 rw rootwait\0" \
190 "nandargs=setenv bootargs console=${console} " \
191 "root=/dev/mtdblock4 rw " \
192 "rootfstype=jffs2\0" \
193 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
194 "bootscript=echo Running bootscript from mmc ...; " \
195 "source ${loadaddr}\0" \
196 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
197 "mmcboot=echo Booting from mmc ...; " \
199 "bootm ${loadaddr}\0" \
200 "nandboot=echo Booting from nand ...; " \
202 "nand read ${loadaddr} 280000 400000; " \
203 "bootm ${loadaddr}\0" \
205 #define CONFIG_BOOTCOMMAND \
206 "mmc dev ${mmcdev}; if mmc rescan; then " \
207 "if run loadbootscript; then " \
210 "if run loaduimage; then " \
212 "else run nandboot; " \
215 "else run nandboot; fi"
217 #define CONFIG_AUTO_COMPLETE 1
219 * Miscellaneous configurable options
221 #define CONFIG_SYS_LONGHELP /* undef to save memory */
222 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
223 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
224 /* Print Buffer Size */
225 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
226 sizeof(CONFIG_SYS_PROMPT) + 16)
227 #define CONFIG_SYS_MAXARGS 32 /* max number of command */
229 /* Boot Argument Buffer Size */
230 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
231 /* memtest works on */
232 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
233 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
234 0x01F00000) /* 31MB */
236 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
240 * AM3517 has 12 GP timers, they can be driven by the system clock
241 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
242 * This rate is divided by a local divisor.
244 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
245 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
247 /*-----------------------------------------------------------------------
248 * Physical Memory Map
250 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
251 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
252 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
254 /*-----------------------------------------------------------------------
255 * FLASH and environment organization
258 /* **** PISMO SUPPORT *** */
259 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
261 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
262 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
264 #if defined(CONFIG_CMD_NAND)
265 #define CONFIG_SYS_FLASH_BASE NAND_BASE
268 /* Monitor at start of flash */
269 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
271 #define CONFIG_NAND_OMAP_GPMC
272 #define CONFIG_ENV_IS_IN_NAND 1
273 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
275 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
276 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
277 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
279 /*-----------------------------------------------------------------------
280 * CFI FLASH driver setup
282 /* timeout values are in ticks */
283 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
284 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
286 /* Flash banks JFFS2 should use */
287 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
288 CONFIG_SYS_MAX_NAND_DEVICE)
289 #define CONFIG_SYS_JFFS2_MEM_NAND
290 /* use flash_info[2] */
291 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
292 #define CONFIG_SYS_JFFS2_NUM_BANKS 1
294 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
295 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
296 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
297 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
298 CONFIG_SYS_INIT_RAM_SIZE - \
299 GENERATED_GBL_DATA_SIZE)
301 /* Defines for SPL */
302 #define CONFIG_SPL_FRAMEWORK
303 #define CONFIG_SPL_BOARD_INIT
304 #define CONFIG_SPL_NAND_SIMPLE
305 #define CONFIG_SPL_TEXT_BASE 0x40200800
306 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
308 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
309 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
311 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
312 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
313 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
314 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
316 #define CONFIG_SPL_LIBCOMMON_SUPPORT
317 #define CONFIG_SPL_LIBDISK_SUPPORT
318 #define CONFIG_SPL_I2C_SUPPORT
319 #define CONFIG_SPL_LIBGENERIC_SUPPORT
320 #define CONFIG_SPL_MMC_SUPPORT
321 #define CONFIG_SPL_FAT_SUPPORT
322 #define CONFIG_SPL_SERIAL_SUPPORT
323 #define CONFIG_SPL_NAND_SUPPORT
324 #define CONFIG_SPL_NAND_BASE
325 #define CONFIG_SPL_NAND_DRIVERS
326 #define CONFIG_SPL_NAND_ECC
327 #define CONFIG_SPL_POWER_SUPPORT
328 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
330 /* NAND boot config */
331 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
332 #define CONFIG_SYS_NAND_PAGE_COUNT 64
333 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
334 #define CONFIG_SYS_NAND_OOBSIZE 64
335 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
336 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
337 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
339 #define CONFIG_SYS_NAND_ECCSIZE 512
340 #define CONFIG_SYS_NAND_ECCBYTES 3
341 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
342 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
343 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
346 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
347 * 64 bytes before this address should be set aside for u-boot.img's
348 * header. That is 0x800FFFC0--0x80100000 should not be used for any
351 #define CONFIG_SYS_TEXT_BASE 0x80100000
352 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
353 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
355 #endif /* __CONFIG_H */