2 * am3517_crane.h - Default configuration for AM3517 CraneBoard.
4 * Author: Srinath.R <srinath@mistralsolutions.com>
6 * Based on include/configs/am3517evm.h
8 * Copyright (C) 2011 Mistral Solutions pvt Ltd
10 * SPDX-License-Identifier: GPL-2.0+
17 * High Level Configuration Options
19 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */
21 #include <asm/arch/cpu.h> /* get chip and board defs */
22 #include <asm/arch/omap.h>
25 #define V_OSCK 26000000 /* Clock output from T2 */
26 #define V_SCLK (V_OSCK >> 1)
28 #define CONFIG_MISC_INIT_R
30 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
31 #define CONFIG_SETUP_MEMORY_TAGS 1
32 #define CONFIG_INITRD_TAG 1
33 #define CONFIG_REVISION_TAG 1
36 * Size of malloc() pool
38 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
39 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
44 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
51 * NS16550 Configuration
53 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
55 #define CONFIG_SYS_NS16550_SERIAL
56 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
57 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
60 * select serial console configuration
62 #define CONFIG_CONS_INDEX 3
63 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
64 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */
66 /* allow to overwrite serial and ethaddr */
67 #define CONFIG_ENV_OVERWRITE
68 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
73 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
74 * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
76 #define CONFIG_USB_AM35X 1
77 #define CONFIG_USB_MUSB_HCD 1
79 #ifdef CONFIG_USB_AM35X
81 #ifdef CONFIG_USB_MUSB_HCD
83 #ifdef CONFIG_USB_KEYBOARD
84 #define CONFIG_SYS_USB_EVENT_POLL
85 #define CONFIG_PREBOOT "usb start"
86 #endif /* CONFIG_USB_KEYBOARD */
88 #endif /* CONFIG_USB_MUSB_HCD */
90 #ifdef CONFIG_USB_MUSB_UDC
91 /* USB device configuration */
92 #define CONFIG_USB_DEVICE 1
93 #define CONFIG_USB_TTY 1
94 /* Change these to suit your needs */
95 #define CONFIG_USBD_VENDORID 0x0451
96 #define CONFIG_USBD_PRODUCTID 0x5678
97 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
98 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE"
99 #endif /* CONFIG_USB_MUSB_UDC */
101 #endif /* CONFIG_USB_AM35X */
103 /* commands to include */
105 #define CONFIG_CMD_NAND /* NAND support */
107 #define CONFIG_SYS_I2C
108 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
109 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
110 #define CONFIG_SYS_I2C_OMAP34XX
115 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
117 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
121 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
124 #define CONFIG_JFFS2_NAND
125 /* nand device jffs2 lives on */
126 #define CONFIG_JFFS2_DEV "nand0"
127 /* start of jffs2 partition */
128 #define CONFIG_JFFS2_PART_OFFSET 0x680000
129 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
131 /* Environment information */
133 #define CONFIG_BOOTFILE "uImage"
135 #define CONFIG_EXTRA_ENV_SETTINGS \
136 "loadaddr=0x82000000\0" \
137 "console=ttyS2,115200n8\0" \
139 "mmcargs=setenv bootargs console=${console} " \
140 "root=/dev/mmcblk0p2 rw " \
141 "rootfstype=ext3 rootwait\0" \
142 "nandargs=setenv bootargs console=${console} " \
143 "root=/dev/mtdblock4 rw " \
144 "rootfstype=jffs2\0" \
145 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
146 "bootscript=echo Running bootscript from mmc ...; " \
147 "source ${loadaddr}\0" \
148 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
149 "mmcboot=echo Booting from mmc ...; " \
151 "bootm ${loadaddr}\0" \
152 "nandboot=echo Booting from nand ...; " \
154 "nand read ${loadaddr} 280000 400000; " \
155 "bootm ${loadaddr}\0" \
157 #define CONFIG_BOOTCOMMAND \
158 "mmc dev ${mmcdev}; if mmc rescan; then " \
159 "if run loadbootscript; then " \
162 "if run loaduimage; then " \
164 "else run nandboot; " \
167 "else run nandboot; fi"
169 #define CONFIG_AUTO_COMPLETE 1
171 * Miscellaneous configurable options
173 #define CONFIG_SYS_LONGHELP /* undef to save memory */
174 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
175 /* Print Buffer Size */
176 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
177 sizeof(CONFIG_SYS_PROMPT) + 16)
178 #define CONFIG_SYS_MAXARGS 32 /* max number of command */
180 /* Boot Argument Buffer Size */
181 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
182 /* memtest works on */
183 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
184 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
185 0x01F00000) /* 31MB */
187 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
191 * AM3517 has 12 GP timers, they can be driven by the system clock
192 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
193 * This rate is divided by a local divisor.
195 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
196 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
198 /*-----------------------------------------------------------------------
199 * Physical Memory Map
201 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
202 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
203 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
205 /*-----------------------------------------------------------------------
206 * FLASH and environment organization
209 /* **** PISMO SUPPORT *** */
210 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
212 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
213 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
215 #define CONFIG_SYS_FLASH_BASE NAND_BASE
217 /* Monitor at start of flash */
218 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
220 #define CONFIG_NAND_OMAP_GPMC
221 #define CONFIG_ENV_IS_IN_NAND 1
222 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
224 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */
225 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
226 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
228 /*-----------------------------------------------------------------------
229 * CFI FLASH driver setup
231 /* timeout values are in ticks */
232 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
233 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
235 /* Flash banks JFFS2 should use */
236 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
237 CONFIG_SYS_MAX_NAND_DEVICE)
238 #define CONFIG_SYS_JFFS2_MEM_NAND
239 /* use flash_info[2] */
240 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
241 #define CONFIG_SYS_JFFS2_NUM_BANKS 1
243 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
244 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
245 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
246 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
247 CONFIG_SYS_INIT_RAM_SIZE - \
248 GENERATED_GBL_DATA_SIZE)
250 /* Defines for SPL */
251 #define CONFIG_SPL_FRAMEWORK
252 #define CONFIG_SPL_NAND_SIMPLE
253 #define CONFIG_SPL_TEXT_BASE 0x40200800
254 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
255 CONFIG_SPL_TEXT_BASE)
257 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
258 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
260 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
261 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
263 #define CONFIG_SPL_NAND_BASE
264 #define CONFIG_SPL_NAND_DRIVERS
265 #define CONFIG_SPL_NAND_ECC
266 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
268 /* NAND boot config */
269 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
270 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
271 #define CONFIG_SYS_NAND_PAGE_COUNT 64
272 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
273 #define CONFIG_SYS_NAND_OOBSIZE 64
274 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
275 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
276 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
278 #define CONFIG_SYS_NAND_ECCSIZE 512
279 #define CONFIG_SYS_NAND_ECCBYTES 3
280 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
281 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
282 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
285 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
286 * 64 bytes before this address should be set aside for u-boot.img's
287 * header. That is 0x800FFFC0--0x80100000 should not be used for any
290 #define CONFIG_SYS_TEXT_BASE 0x80100000
291 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
292 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
294 #endif /* __CONFIG_H */