ARM: configs: Add da850evm_nand to boot from NAND
[oweals/u-boot.git] / include / configs / adp-ag101p.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2011 Andes Technology Corporation
4  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
5  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <asm/arch-ag101/ag101.h>
12
13 /*
14  * CPU and Board Configuration Options
15  */
16 #define CONFIG_USE_INTERRUPT
17
18 #define CONFIG_SKIP_LOWLEVEL_INIT
19
20 #define CONFIG_ARCH_MAP_SYSMEM
21
22 #define CONFIG_BOOTP_SEND_HOSTNAME
23 #define CONFIG_BOOTP_SERVERIP
24
25 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
26 #define CONFIG_MEM_REMAP
27 #endif
28
29 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
30 #ifdef CONFIG_OF_CONTROL
31 #undef CONFIG_OF_SEPARATE
32 #define CONFIG_OF_EMBED
33 #endif
34 #endif
35
36 /*
37  * Timer
38  */
39 #define CONFIG_SYS_CLK_FREQ     39062500
40 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
41
42 /*
43  * Use Externel CLOCK or PCLK
44  */
45 #undef CONFIG_FTRTC010_EXTCLK
46
47 #ifndef CONFIG_FTRTC010_EXTCLK
48 #define CONFIG_FTRTC010_PCLK
49 #endif
50
51 #ifdef CONFIG_FTRTC010_EXTCLK
52 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
53 #else
54 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
55 #endif
56
57 #define TIMER_LOAD_VAL  0xffffffff
58
59 /*
60  * Real Time Clock
61  */
62 #define CONFIG_RTC_FTRTC010
63
64 /*
65  * Real Time Clock Divider
66  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
67  */
68 #define OSC_5MHZ                        (5*1000000)
69 #define OSC_CLK                         (4*OSC_5MHZ)
70 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
71
72 /*
73  * Serial console configuration
74  */
75
76 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
77 #define CONFIG_SYS_NS16550_SERIAL
78 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
79 #ifndef CONFIG_DM_SERIAL
80 #define CONFIG_SYS_NS16550_REG_SIZE     -4
81 #endif
82 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
83
84 /*
85  * Miscellaneous configurable options
86  */
87
88 /*
89  * Size of malloc() pool
90  */
91 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
92 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
93
94 /*
95  * AHB Controller configuration
96  */
97 #define CONFIG_FTAHBC020S
98
99 #ifdef CONFIG_FTAHBC020S
100 #include <faraday/ftahbc020s.h>
101
102 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
103 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE    0x100
104
105 /*
106  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
107  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
108  * in C language.
109  */
110 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
111         (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
112                                         FTAHBC020S_SLAVE_BSR_SIZE(0xb))
113 #endif
114
115 /*
116  * Watchdog
117  */
118 #define CONFIG_FTWDT010_WATCHDOG
119
120 /*
121  * PMU Power controller configuration
122  */
123 #define CONFIG_PMU
124 #define CONFIG_FTPMU010_POWER
125
126 #ifdef CONFIG_FTPMU010_POWER
127 #include <faraday/ftpmu010.h>
128 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS          0x0E
129 #define CONFIG_SYS_FTPMU010_SDRAMHTC    (FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
130                                          FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
131                                          FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
132                                          FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
133                                          FTPMU010_SDRAMHTC_CKE_DCSR      | \
134                                          FTPMU010_SDRAMHTC_DQM_DCSR      | \
135                                          FTPMU010_SDRAMHTC_SDCLK_DCSR)
136 #endif
137
138 /*
139  * SDRAM controller configuration
140  */
141 #define CONFIG_FTSDMC021
142
143 #ifdef CONFIG_FTSDMC021
144 #include <faraday/ftsdmc021.h>
145
146 #define CONFIG_SYS_FTSDMC021_TP1        (FTSDMC021_TP1_TRAS(2)  |       \
147                                          FTSDMC021_TP1_TRP(1)   |       \
148                                          FTSDMC021_TP1_TRCD(1)  |       \
149                                          FTSDMC021_TP1_TRF(3)   |       \
150                                          FTSDMC021_TP1_TWR(1)   |       \
151                                          FTSDMC021_TP1_TCL(2))
152
153 #define CONFIG_SYS_FTSDMC021_TP2        (FTSDMC021_TP2_INI_PREC(4) |    \
154                                          FTSDMC021_TP2_INI_REFT(8) |    \
155                                          FTSDMC021_TP2_REF_INTV(0x180))
156
157 /*
158  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
159  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
160  * C language.
161  */
162 #define CONFIG_SYS_FTSDMC021_CR1        (FTSDMC021_CR1_DDW(2)    |      \
163                                          FTSDMC021_CR1_DSZ(3)    |      \
164                                          FTSDMC021_CR1_MBW(2)    |      \
165                                          FTSDMC021_CR1_BNKSIZE(6))
166
167 #define CONFIG_SYS_FTSDMC021_CR2        (FTSDMC021_CR2_IPREC     |      \
168                                          FTSDMC021_CR2_IREF      |      \
169                                          FTSDMC021_CR2_ISMR)
170
171 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
172 #define CONFIG_SYS_FTSDMC021_BANK0_BSR  (FTSDMC021_BANK_ENABLE   |      \
173                                          CONFIG_SYS_FTSDMC021_BANK0_BASE)
174
175 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \
176         (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
177 #define CONFIG_SYS_FTSDMC021_BANK1_BSR  (FTSDMC021_BANK_ENABLE   |      \
178                                          CONFIG_SYS_FTSDMC021_BANK1_BASE)
179 #endif
180
181 /*
182  * Physical Memory Map
183  */
184 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
185 #define PHYS_SDRAM_0    0x00000000  /* SDRAM Bank #1 */
186 #else
187 #ifdef CONFIG_MEM_REMAP
188 #define PHYS_SDRAM_0    0x00000000      /* SDRAM Bank #1 */
189 #else
190 #define PHYS_SDRAM_0    0x80000000      /* SDRAM Bank #1 */
191 #endif
192 #endif
193
194 #define PHYS_SDRAM_1 \
195         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
196
197 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
198 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
199 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
200 #else
201 #ifdef CONFIG_MEM_REMAP
202 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
203 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
204 #else
205 #define PHYS_SDRAM_0_SIZE       0x08000000      /* 128 MB */
206 #define PHYS_SDRAM_1_SIZE       0x08000000      /* 128 MB */
207 #endif
208 #endif
209
210 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
211
212 #ifdef CONFIG_MEM_REMAP
213 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
214                                         GENERATED_GBL_DATA_SIZE)
215 #else
216 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
217                                         GENERATED_GBL_DATA_SIZE)
218 #endif /* CONFIG_MEM_REMAP */
219
220 /*
221  * Load address and memory test area should agree with
222  * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
223  */
224 #define CONFIG_SYS_LOAD_ADDR            0x300000
225
226 /* memtest works on 63 MB in DRAM */
227 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
228 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
229
230 /*
231  * Static memory controller configuration
232  */
233 #define CONFIG_FTSMC020
234
235 #ifdef CONFIG_FTSMC020
236 #include <faraday/ftsmc020.h>
237
238 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
239         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
240         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
241 }
242
243 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
244 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
245                                          FTSMC020_BANK_SIZE_32M |       \
246                                          FTSMC020_BANK_MBW_32)
247
248 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
249                                          FTSMC020_TPR_AST(1)    |       \
250                                          FTSMC020_TPR_CTW(1)    |       \
251                                          FTSMC020_TPR_ATI(1)    |       \
252                                          FTSMC020_TPR_AT2(1)    |       \
253                                          FTSMC020_TPR_WTC(1)    |       \
254                                          FTSMC020_TPR_AHT(1)    |       \
255                                          FTSMC020_TPR_TRNA(1))
256 #endif
257
258 /*
259  * FLASH on ADP_AG101P is connected to BANK0
260  * Just disalbe the other BANK to avoid detection error.
261  */
262 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
263                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
264                                  FTSMC020_BANK_SIZE_32M           |     \
265                                  FTSMC020_BANK_MBW_32)
266
267 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
268                                  FTSMC020_TPR_CTW(3)   |        \
269                                  FTSMC020_TPR_ATI(0xf) |        \
270                                  FTSMC020_TPR_AT2(3)   |        \
271                                  FTSMC020_TPR_WTC(3)   |        \
272                                  FTSMC020_TPR_AHT(3)   |        \
273                                  FTSMC020_TPR_TRNA(0xf))
274
275 #define FTSMC020_BANK1_CONFIG   (0x00)
276 #define FTSMC020_BANK1_TIMING   (0x00)
277 #endif /* CONFIG_FTSMC020 */
278
279 /*
280  * FLASH and environment organization
281  */
282 /* use CFI framework */
283 #define CONFIG_SYS_FLASH_CFI
284 #define CONFIG_FLASH_CFI_DRIVER
285
286 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
287 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
288 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
289
290 /* support JEDEC */
291
292 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
293 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
294 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
295 #else
296 #ifdef CONFIG_MEM_REMAP
297 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
298 #else
299 #define PHYS_FLASH_1                    0x00000000      /* BANK 0 */
300 #endif
301 #endif  /* CONFIG_MEM_REMAP */
302
303 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
304 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
305 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
306
307 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
308 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
309
310 /* max number of memory banks */
311 /*
312  * There are 4 banks supported for this Controller,
313  * but we have only 1 bank connected to flash on board
314  */
315 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
316 #define CONFIG_SYS_MAX_FLASH_BANKS      1
317 #endif
318 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
319
320 /* max number of sectors on one chip */
321 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2)
322 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
323 #define CONFIG_SYS_MAX_FLASH_SECT       512
324
325 /* environments */
326 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
327 #define CONFIG_ENV_SIZE                 8192
328 #define CONFIG_ENV_OVERWRITE
329
330 /*
331  * For booting Linux, the board info and command line data
332  * have to be in the first 16 MB of memory, since this is
333  * the maximum mapped by the Linux kernel during initialization.
334  */
335
336 /* Initial Memory map for Linux*/
337 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
338 /* Increase max gunzip size */
339 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
340
341 #endif  /* __CONFIG_H */