at91: Introduction of at91sam9g45 SOC.
[oweals/u-boot.git] / include / configs / XPEDITE5200.h
1 /*
2  * Copyright 2008 Extreme Engineering Solutions, Inc.
3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 /*
25  * xpedite5200 board configuration file
26  */
27 #ifndef __CONFIG_H
28 #define __CONFIG_H
29
30 /*
31  * High Level Configuration Options
32  */
33 #define CONFIG_BOOKE            1       /* BOOKE */
34 #define CONFIG_E500             1       /* BOOKE e500 family */
35 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
36 #define CONFIG_MPC8548          1
37 #define CONFIG_XPEDITE5200      1
38 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
39 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
40 #define CONFIG_RELOC_FIXUP_WORKS        /* Fully relocate to SDRAM */
41
42 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
43 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play */
44 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
45 #define CONFIG_PCI1             1       /* PCI controller 1 */
46 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
47 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
48 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
49
50 /*
51  * DDR config
52  */
53 #define CONFIG_FSL_DDR2
54 #undef CONFIG_FSL_DDR_INTERACTIVE
55 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
56 #define CONFIG_DDR_SPD
57 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
58 #define SPD_EEPROM_ADDRESS              0x54
59 #define CONFIG_NUM_DDR_CONTROLLERS      1
60 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
61 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
62 #define CONFIG_DDR_ECC
63 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
64 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
65 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
66 #define CONFIG_VERY_BIG_RAM
67
68 #define CONFIG_SYS_CLK_FREQ     66666666
69
70 /*
71  * These can be toggled for performance analysis, otherwise use default.
72  */
73 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
74 #define CONFIG_BTB                      /* toggle branch predition */
75 #define CONFIG_ENABLE_36BIT_PHYS        1
76
77 /*
78  * Base addresses -- Note these are effective addresses where the
79  * actual resources get mapped (not physical addresses)
80  */
81 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
82 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
83 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
84 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
85 #define CONFIG_SYS_PCI1_ADDR    (CONFIG_SYS_CCSRBAR + 0x8000)
86
87 /*
88  * Diagnostics
89  */
90 #define CONFIG_SYS_ALT_MEMTEST
91 #define CONFIG_SYS_MEMTEST_START        0x10000000
92 #define CONFIG_SYS_MEMTEST_END          0x20000000
93
94 /*
95  * Memory map
96  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
97  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
98  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
99  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
100  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
101  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
102  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
103  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
104  */
105
106 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_4 | LCRR_EADC_3)
107
108 /*
109  * NAND flash configuration
110  */
111 #define CONFIG_SYS_NAND_BASE            0xef800000
112 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
113 #define CONFIG_SYS_MAX_NAND_DEVICE      1
114 #define CONFIG_NAND_ACTL
115 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
116 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
117 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
118 #define CONFIG_SYS_NAND_ACTL_DELAY      25
119
120 /*
121  * NOR flash configuration
122  */
123 #define CONFIG_SYS_FLASH_BASE           0xfc000000
124 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
125 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
126 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
127 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
128 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
129 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
130 #define CONFIG_FLASH_CFI_DRIVER
131 #define CONFIG_SYS_FLASH_CFI
132 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
133                                                   {0xfbf40000, 0xc0000} }
134 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE       /* start of monitor */
135
136 /*
137  * Chip select configuration
138  */
139 /* NOR Flash 0 on CS0 */
140 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
141                                  BR_PS_16               | \
142                                  BR_V)
143 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
144                                  OR_GPCM_ACS_DIV4       | \
145                                  OR_GPCM_SCY_8)
146
147 /* NOR Flash 1 on CS1 */
148 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
149                                  BR_PS_16               | \
150                                  BR_V)
151 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
152
153 /* NAND flash on CS2 */
154 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
155                                  BR_PS_8                | \
156                                  BR_V)
157
158 /* NAND flash on CS2 */
159 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
160                                  OR_GPCM_BCTLD          | \
161                                  OR_GPCM_CSNT           | \
162                                  OR_GPCM_ACS_DIV4       | \
163                                  OR_GPCM_SCY_4          | \
164                                  OR_GPCM_TRLX           | \
165                                  OR_GPCM_EHTR)
166
167 /* NAND flash on CS3 */
168 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
169                                  BR_PS_8                | \
170                                  BR_V)
171 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
172
173 /*
174  * Use L1 as initial stack
175  */
176 #define CONFIG_SYS_INIT_RAM_LOCK        1
177 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
178 #define CONFIG_SYS_INIT_RAM_END         0x4000
179
180 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* num bytes initial data */
181 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
182 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
183
184 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
185 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
186
187 /*
188  * Serial Port
189  */
190 #define CONFIG_CONS_INDEX               1
191 #define CONFIG_SYS_NS16550
192 #define CONFIG_SYS_NS16550_SERIAL
193 #define CONFIG_SYS_NS16550_REG_SIZE     1
194 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
195 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
196 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
197 #define CONFIG_SYS_BAUDRATE_TABLE       \
198         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
199 #define CONFIG_BAUDRATE                 115200
200 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
201 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
202
203 /*
204  * Use the HUSH parser
205  */
206 #define CONFIG_SYS_HUSH_PARSER
207 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
208
209 /*
210  * Pass open firmware flat tree
211  */
212 #define CONFIG_OF_LIBFDT                1
213 #define CONFIG_OF_BOARD_SETUP           1
214 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
215
216 #define CONFIG_SYS_64BIT_VSPRINTF       1
217 #define CONFIG_SYS_64BIT_STRTOUL        1
218
219 /*
220  * I2C
221  */
222 #define CONFIG_FSL_I2C                          /* Use FSL common I2C driver */
223 #define CONFIG_HARD_I2C                         /* I2C with hardware support */
224 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
225 #define CONFIG_SYS_I2C_SLAVE            0x7F
226 #define CONFIG_SYS_I2C_OFFSET           0x3000
227 #define CONFIG_SYS_I2C2_OFFSET          0x3100
228 #define CONFIG_I2C_MULTI_BUS
229
230 /* I2C EEPROM */
231 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
232 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
233 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
234 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
235
236 /* I2C RTC */
237 #define CONFIG_RTC_M41T11                       1
238 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
239 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
240
241 /* GPIO */
242 #define CONFIG_PCA953X
243 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
244 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
245 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
246
247 /* PCA957 @ 0x18 */
248 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
249 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
250 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
251 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
252 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
253 #define CONFIG_SYS_PCA953X_FLASH_WP             0x20
254 #define CONFIG_SYS_PCA953X_MONARCH              0x40
255 #define CONFIG_SYS_PCA953X_EREADY               0x80
256
257 /* PCA957 @ 0x19 */
258 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
259 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
260 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
261 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
262 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
263 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
264 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
265 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
266
267 /*
268  * General PCI
269  * Memory space is mapped 1-1, but I/O space must start from 0.
270  */
271 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
272 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
273 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
274 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
275 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
276 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
277
278 /*
279  * Networking options
280  */
281 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
282 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
283 #define CONFIG_NET_MULTI        1
284 #define CONFIG_MII              1       /* MII PHY management */
285 #define CONFIG_ETHPRIME         "eTSEC1"
286
287 #define CONFIG_TSEC1            1
288 #define CONFIG_TSEC1_NAME       "eTSEC1"
289 #define TSEC1_FLAGS             TSEC_GIGABIT
290 #define TSEC1_PHY_ADDR          1
291 #define TSEC1_PHYIDX            0
292 #define CONFIG_HAS_ETH0
293
294 #define CONFIG_TSEC2            1
295 #define CONFIG_TSEC2_NAME       "eTSEC2"
296 #define TSEC2_FLAGS             TSEC_GIGABIT
297 #define TSEC2_PHY_ADDR          2
298 #define TSEC2_PHYIDX            0
299 #define CONFIG_HAS_ETH1
300
301 #define CONFIG_TSEC3    1
302 #define CONFIG_TSEC3_NAME       "eTSEC3"
303 #define TSEC3_FLAGS             TSEC_GIGABIT
304 #define TSEC3_PHY_ADDR          3
305 #define TSEC3_PHYIDX            0
306 #define CONFIG_HAS_ETH2
307
308 #define CONFIG_TSEC4    1
309 #define CONFIG_TSEC4_NAME       "eTSEC4"
310 #define TSEC4_FLAGS             TSEC_GIGABIT
311 #define TSEC4_PHY_ADDR          4
312 #define TSEC4_PHYIDX            0
313 #define CONFIG_HAS_ETH3
314
315 /*
316  * BOOTP options
317  */
318 #define CONFIG_BOOTP_BOOTFILESIZE
319 #define CONFIG_BOOTP_BOOTPATH
320 #define CONFIG_BOOTP_GATEWAY
321
322 /*
323  * Command configuration.
324  */
325 #include <config_cmd_default.h>
326
327 #define CONFIG_CMD_ASKENV
328 #define CONFIG_CMD_DATE
329 #define CONFIG_CMD_DHCP
330 #define CONFIG_CMD_EEPROM
331 #define CONFIG_CMD_ELF
332 #define CONFIG_CMD_SAVEENV
333 #define CONFIG_CMD_FLASH
334 #define CONFIG_CMD_I2C
335 #define CONFIG_CMD_JFFS2
336 #define CONFIG_CMD_MII
337 #define CONFIG_CMD_NAND
338 #define CONFIG_CMD_NET
339 #define CONFIG_CMD_PCA953X
340 #define CONFIG_CMD_PCA953X_INFO
341 #define CONFIG_CMD_PCI
342 #define CONFIG_CMD_PING
343 #define CONFIG_CMD_SNTP
344
345 /*
346  * Miscellaneous configurable options
347  */
348 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
349 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
350 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
351 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
352 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
353 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
354 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
355 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
356 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
357 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
358 #define CONFIG_BOOTDELAY        3               /* -1 disables auto-boot */
359 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
360 #define CONFIG_PREBOOT                          /* enable preboot variable */
361 #define CONFIG_FIT              1
362 #define CONFIG_FIT_VERBOSE      1
363 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
364 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
365
366 /*
367  * For booting Linux, the board info and command line data
368  * have to be in the first 16 MB of memory, since this is
369  * the maximum mapped by the Linux kernel during initialization.
370  */
371 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
372
373 /*
374  * Boot Flags
375  */
376 #define BOOTFLAG_COLD           0x01            /* Normal Power-On: Boot from FLASH */
377 #define BOOTFLAG_WARM           0x02            /* Software reboot */
378
379 /*
380  * Environment Configuration
381  */
382 #define CONFIG_ENV_IS_IN_FLASH  1
383 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
384 #define CONFIG_ENV_SIZE         0x8000
385 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
386
387 /*
388  * Flash memory map:
389  * fff80000 - ffffffff     Pri U-Boot (512 KB)
390  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
391  * fff00000 - fff3ffff     Pri FDT (256KB)
392  * fef00000 - ffefffff     Pri OS image (16MB)
393  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
394  *
395  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
396  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
397  * fbf00000 - fbf3ffff     Sec FDT (256KB)
398  * faf00000 - fbefffff     Sec OS image (16MB)
399  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
400  */
401 #define CONFIG_UBOOT1_ENV_ADDR  MK_STR(0xfff80000)
402 #define CONFIG_UBOOT2_ENV_ADDR  MK_STR(0xfbf80000)
403 #define CONFIG_FDT1_ENV_ADDR    MK_STR(0xfff00000)
404 #define CONFIG_FDT2_ENV_ADDR    MK_STR(0xfbf00000)
405 #define CONFIG_OS1_ENV_ADDR     MK_STR(0xfef00000)
406 #define CONFIG_OS2_ENV_ADDR     MK_STR(0xfaf00000)
407
408 #define CONFIG_PROG_UBOOT1                                              \
409         "$download_cmd $loadaddr $ubootfile; "                          \
410         "if test $? -eq 0; then "                                       \
411                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
412                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
413                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
414                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
415                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
416                 "if test $? -ne 0; then "                               \
417                         "echo PROGRAM FAILED; "                         \
418                 "else; "                                                \
419                         "echo PROGRAM SUCCEEDED; "                      \
420                 "fi; "                                                  \
421         "else; "                                                        \
422                 "echo DOWNLOAD FAILED; "                                \
423         "fi;"
424
425 #define CONFIG_PROG_UBOOT2                                              \
426         "$download_cmd $loadaddr $ubootfile; "                          \
427         "if test $? -eq 0; then "                                       \
428                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
429                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
430                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
431                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
432                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
433                 "if test $? -ne 0; then "                               \
434                         "echo PROGRAM FAILED; "                         \
435                 "else; "                                                \
436                         "echo PROGRAM SUCCEEDED; "                      \
437                 "fi; "                                                  \
438         "else; "                                                        \
439                 "echo DOWNLOAD FAILED; "                                \
440         "fi;"
441
442 #define CONFIG_BOOT_OS_NET                                              \
443         "$download_cmd $osaddr $osfile; "                               \
444         "if test $? -eq 0; then "                                       \
445                 "if test -n $fdtaddr; then "                            \
446                         "$download_cmd $fdtaddr $fdtfile; "             \
447                         "if test $? -eq 0; then "                       \
448                                 "bootm $osaddr - $fdtaddr; "            \
449                         "else; "                                        \
450                                 "echo FDT DOWNLOAD FAILED; "            \
451                         "fi; "                                          \
452                 "else; "                                                \
453                         "bootm $osaddr; "                               \
454                 "fi; "                                                  \
455         "else; "                                                        \
456                 "echo OS DOWNLOAD FAILED; "                             \
457         "fi;"
458
459 #define CONFIG_PROG_OS1                                                 \
460         "$download_cmd $osaddr $osfile; "                               \
461         "if test $? -eq 0; then "                                       \
462                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
463                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
464                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
465                 "if test $? -ne 0; then "                               \
466                         "echo OS PROGRAM FAILED; "                      \
467                 "else; "                                                \
468                         "echo OS PROGRAM SUCCEEDED; "                   \
469                 "fi; "                                                  \
470         "else; "                                                        \
471                 "echo OS DOWNLOAD FAILED; "                             \
472         "fi;"
473
474 #define CONFIG_PROG_OS2                                                 \
475         "$download_cmd $osaddr $osfile; "                               \
476         "if test $? -eq 0; then "                                       \
477                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
478                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
479                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
480                 "if test $? -ne 0; then "                               \
481                         "echo OS PROGRAM FAILED; "                      \
482                 "else; "                                                \
483                         "echo OS PROGRAM SUCCEEDED; "                   \
484                 "fi; "                                                  \
485         "else; "                                                        \
486                 "echo OS DOWNLOAD FAILED; "                             \
487         "fi;"
488
489 #define CONFIG_PROG_FDT1                                                \
490         "$download_cmd $fdtaddr $fdtfile; "                             \
491         "if test $? -eq 0; then "                                       \
492                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
493                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
494                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
495                 "if test $? -ne 0; then "                               \
496                         "echo FDT PROGRAM FAILED; "                     \
497                 "else; "                                                \
498                         "echo FDT PROGRAM SUCCEEDED; "                  \
499                 "fi; "                                                  \
500         "else; "                                                        \
501                 "echo FDT DOWNLOAD FAILED; "                            \
502         "fi;"
503
504 #define CONFIG_PROG_FDT2                                                \
505         "$download_cmd $fdtaddr $fdtfile; "                             \
506         "if test $? -eq 0; then "                                       \
507                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
508                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
509                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
510                 "if test $? -ne 0; then "                               \
511                         "echo FDT PROGRAM FAILED; "                     \
512                 "else; "                                                \
513                         "echo FDT PROGRAM SUCCEEDED; "                  \
514                 "fi; "                                                  \
515         "else; "                                                        \
516                 "echo FDT DOWNLOAD FAILED; "                            \
517         "fi;"
518
519 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
520         "autoload=yes\0"                                                \
521         "download_cmd=tftp\0"                                           \
522         "console_args=console=ttyS0,115200\0"                           \
523         "root_args=root=/dev/nfs rw\0"                                  \
524         "misc_args=ip=on\0"                                             \
525         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
526         "bootfile=/home/user/file\0"                                    \
527         "osfile=/home/user/uImage-XPedite5200\0"                        \
528         "fdtfile=/home/user/xpedite5200.dtb\0"                          \
529         "ubootfile=/home/user/u-boot.bin\0"                             \
530         "fdtaddr=c00000\0"                                              \
531         "osaddr=0x1000000\0"                                            \
532         "loadaddr=0x1000000\0"                                          \
533         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
534         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
535         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
536         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
537         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
538         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
539         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
540         "bootcmd_flash1=run set_bootargs; "                             \
541                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
542         "bootcmd_flash2=run set_bootargs; "                             \
543                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
544         "bootcmd=run bootcmd_flash1\0"
545 #endif  /* __CONFIG_H */