include/configs/TQM834x.h

   1 /*
   2  * (C) Copyright 2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * TQM8349 board configuration file
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  */
  34 #define CONFIG_E300             1       /* E300 Family */
  35 #define CONFIG_MPC83xx          1       /* MPC83xx family */
  36 #define CONFIG_MPC834x          1       /* MPC834x specific */
  37 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  38 #define CONFIG_TQM834X          1       /* TQM834X board specific */
  39
  40 #define CONFIG_SYS_TEXT_BASE    0x80000000
  41
  42 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
  43 #define CONFIG_SYS_IMMR         0xff400000
  44
  45 /* System clock. Primary input clock when in PCI host mode */
  46 #define CONFIG_83XX_CLKIN       66666000        /* 66,666 MHz */
  47
  48 /*
  49  * Local Bus LCRR
  50  *    LCRR:  DLL bypass, Clock divider is 8
  51  *
  52  *    for CSB = 266 MHz it gives LCB clock frequency = 33 MHz
  53  *
  54  * External Local Bus rate is
  55  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  56  */
  57 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
  58 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_8
  59
  60 /* board pre init: do not call, nothing to do */
  61 #undef CONFIG_BOARD_EARLY_INIT_F
  62
  63 /* detect the number of flash banks */
  64 #define CONFIG_BOARD_EARLY_INIT_R
  65
  66 /*
  67  * DDR Setup
  68  */
  69 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is system memory*/
  70 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  71 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  72 #define DDR_CASLAT_25                           /* CASLAT set to 2.5 */
  73 #undef CONFIG_DDR_ECC                           /* only for ECC DDR module */
  74 #undef CONFIG_SPD_EEPROM                        /* do not use SPD EEPROM for DDR setup */
  75
  76 #undef CONFIG_SYS_DRAM_TEST                             /* memory test, takes time */
  77 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  78 #define CONFIG_SYS_MEMTEST_END          0x00100000
  79
  80 /*
  81  * FLASH on the Local Bus
  82  */
  83 #define CONFIG_SYS_FLASH_CFI                            /* use the Common Flash Interface */
  84 #define CONFIG_FLASH_CFI_DRIVER                         /* use the CFI driver */
  85 #undef CONFIG_SYS_FLASH_CHECKSUM
  86 #define CONFIG_SYS_FLASH_BASE           0x80000000      /* start of FLASH   */
  87 #define CONFIG_SYS_FLASH_SIZE           8               /* FLASH size in MB */
  88 #define CONFIG_SYS_FLASH_EMPTY_INFO                     /* print 'E' for empty sectors */
  89 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  90
  91 /*
  92  * FLASH bank number detection
  93  */
  94
  95 /*
  96  * When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash
  97  * banks has to be determined at runtime and stored in a gloabl variable
  98  * tqm834x_num_flash_banks. The value of CONFIG_SYS_MAX_FLASH_BANKS_DETECT is only
  99  * used instead of CONFIG_SYS_MAX_FLASH_BANKS to allocate the array flash_info, and
 100  * should be made sufficiently large to accomodate the number of banks that
 101  * might actually be detected.  Since most (all?) Flash related functions use
 102  * CONFIG_SYS_MAX_FLASH_BANKS as the number of actual banks on the board, it is
 103  * defined as tqm834x_num_flash_banks.
 104  */
 105 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       2
 106
 107 #define CONFIG_SYS_MAX_FLASH_SECT               512     /* max sectors per device */
 108
 109 /* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */
 110 #define CONFIG_SYS_BR0_PRELIM           ((CONFIG_SYS_FLASH_BASE & BR_BA) | \
 111                                         BR_MS_GPCM | BR_PS_32 | BR_V)
 112
 113 /* FLASH timing (0x0000_0c54) */
 114 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | \
 115                                         OR_GPCM_SCY_5 | OR_GPCM_TRLX)
 116
 117 #define CONFIG_SYS_PRELIM_OR_AM 0xc0000000      /* OR addr mask: 1 GiB */
 118
 119 #define CONFIG_SYS_OR0_PRELIM           (CONFIG_SYS_PRELIM_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 120
 121 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001D      /* 1 GiB window size (2^(size + 1)) */
 122
 123 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE   /* Window base at flash base */
 124
 125 /* disable remaining mappings */
 126 #define CONFIG_SYS_BR1_PRELIM           0x00000000
 127 #define CONFIG_SYS_OR1_PRELIM           0x00000000
 128 #define CONFIG_SYS_LBLAWBAR1_PRELIM     0x00000000
 129 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x00000000
 130
 131 #define CONFIG_SYS_BR2_PRELIM           0x00000000
 132 #define CONFIG_SYS_OR2_PRELIM           0x00000000
 133 #define CONFIG_SYS_LBLAWBAR2_PRELIM     0x00000000
 134 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x00000000
 135
 136 #define CONFIG_SYS_BR3_PRELIM           0x00000000
 137 #define CONFIG_SYS_OR3_PRELIM           0x00000000
 138 #define CONFIG_SYS_LBLAWBAR3_PRELIM     0x00000000
 139 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x00000000
 140
 141 /*
 142  * Monitor config
 143  */
 144 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 145
 146 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 147 # define CONFIG_SYS_RAMBOOT
 148 #else
 149 # undef  CONFIG_SYS_RAMBOOT
 150 #endif
 151
 152 #define CONFIG_SYS_INIT_RAM_LOCK        1
 153 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000      /* Initial RAM address */
 154 #define CONFIG_SYS_INIT_RAM_END 0x1000          /* End of used area in RAM*/
 155
 156 #define CONFIG_SYS_GBL_DATA_SIZE        0x100           /* num bytes initial data */
 157 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 158 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 159
 160 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024) /* Reserve 384 kB = 3 sect. for Mon */
 161 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024) /* Reserve 512 kB for malloc */
 162
 163 /*
 164  * Serial Port
 165  */
 166 #define CONFIG_CONS_INDEX       1
 167 #define CONFIG_SYS_NS16550
 168 #define CONFIG_SYS_NS16550_SERIAL
 169 #define CONFIG_SYS_NS16550_REG_SIZE     1
 170 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 171
 172 #define CONFIG_SYS_BAUDRATE_TABLE  \
 173         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 174
 175 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
 176 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
 177
 178 /*
 179  * I2C
 180  */
 181 #define CONFIG_HARD_I2C                         /* I2C with hardware support    */
 182 #undef CONFIG_SOFT_I2C                          /* I2C bit-banged               */
 183 #define CONFIG_FSL_I2C
 184 #define CONFIG_SYS_I2C_SPEED                    400000  /* I2C speed: 400KHz            */
 185 #define CONFIG_SYS_I2C_SLAVE                    0x7F    /* slave address                */
 186 #define CONFIG_SYS_I2C_OFFSET                   0x3000
 187
 188 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */
 189 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x                     */
 190 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2       /* 16 bit                       */
 191 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5       /* 32 bytes per write           */
 192 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   12      /* 10ms +/- 20%                 */
 193 #define CONFIG_SYS_I2C_MULTI_EEPROMS            1       /* more than one eeprom         */
 194
 195 /* I2C RTC */
 196 #define CONFIG_RTC_DS1337                       /* use ds1337 rtc via i2c       */
 197 #define CONFIG_SYS_I2C_RTC_ADDR         0x68    /* at address 0x68              */
 198
 199 /* I2C SYSMON (LM75) */
 200 #define CONFIG_DTT_LM75                 1       /* ON Semi's LM75               */
 201 #define CONFIG_DTT_SENSORS              {0}     /* Sensor addresses             */
 202 #define CONFIG_SYS_DTT_MAX_TEMP         70
 203 #define CONFIG_SYS_DTT_LOW_TEMP         -30
 204 #define CONFIG_SYS_DTT_HYSTERESIS               3
 205
 206 /*
 207  * TSEC
 208  */
 209 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 210 #define CONFIG_MII
 211
 212 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 213 #define CONFIG_SYS_TSEC1                (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 214 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 215 #define CONFIG_SYS_TSEC2                (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
 216
 217 #if defined(CONFIG_TSEC_ENET)
 218
 219 #ifndef CONFIG_NET_MULTI
 220 #define CONFIG_NET_MULTI
 221 #endif
 222
 223 #define CONFIG_TSEC1            1
 224 #define CONFIG_TSEC1_NAME       "TSEC0"
 225 #define CONFIG_TSEC2            1
 226 #define CONFIG_TSEC2_NAME       "TSEC1"
 227 #define TSEC1_PHY_ADDR                  2
 228 #define TSEC2_PHY_ADDR                  1
 229 #define TSEC1_PHYIDX                    0
 230 #define TSEC2_PHYIDX                    0
 231 #define TSEC1_FLAGS             TSEC_GIGABIT
 232 #define TSEC2_FLAGS             TSEC_GIGABIT
 233
 234 /* Options are: TSEC[0-1] */
 235 #define CONFIG_ETHPRIME                 "TSEC0"
 236
 237 #endif  /* CONFIG_TSEC_ENET */
 238
 239 /*
 240  * General PCI
 241  * Addresses are mapped 1-1.
 242  */
 243 #define CONFIG_PCI
 244
 245 #if defined(CONFIG_PCI)
 246
 247 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 248 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 249
 250 /* PCI1 host bridge */
 251 #define CONFIG_SYS_PCI1_MEM_BASE       0x90000000
 252 #define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
 253 #define CONFIG_SYS_PCI1_MEM_SIZE       0x10000000      /* 256M */
 254 #define CONFIG_SYS_PCI1_MMIO_BASE      (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
 255 #define CONFIG_SYS_PCI1_MMIO_PHYS      CONFIG_SYS_PCI1_MMIO_BASE
 256 #define CONFIG_SYS_PCI1_MMIO_SIZE      0x10000000     /* 256M */
 257 #define CONFIG_SYS_PCI1_IO_BASE        0xe2000000
 258 #define CONFIG_SYS_PCI1_IO_PHYS        CONFIG_SYS_PCI1_IO_BASE
 259 #define CONFIG_SYS_PCI1_IO_SIZE        0x1000000       /* 16M */
 260
 261 #undef CONFIG_EEPRO100
 262 #define CONFIG_EEPRO100
 263 #undef CONFIG_TULIP
 264
 265 #if !defined(CONFIG_PCI_PNP)
 266         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BASE
 267         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_MEM_BASE
 268         #define PCI_IDSEL_NUMBER        0x1c    /* slot0 (IDSEL) = 28 */
 269 #endif
 270
 271 #define CONFIG_SYS_PCI_SUBSYS_VENDORID          0x1957  /* Freescale */
 272
 273 #endif  /* CONFIG_PCI */
 274
 275 /*
 276  * Environment
 277  */
 278 #define CONFIG_ENV_IS_IN_FLASH          1
 279 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 280 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) for env */
 281 #define CONFIG_ENV_SIZE                 0x8000  /*  32K max size */
 282 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 283 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 284
 285 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 286 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 287
 288 /*
 289  * BOOTP options
 290  */
 291 #define CONFIG_BOOTP_BOOTFILESIZE
 292 #define CONFIG_BOOTP_BOOTPATH
 293 #define CONFIG_BOOTP_GATEWAY
 294 #define CONFIG_BOOTP_HOSTNAME
 295
 296
 297 /*
 298  * Command line configuration.
 299  */
 300 #include <config_cmd_default.h>
 301
 302 #define CONFIG_CMD_ASKENV
 303 #define CONFIG_CMD_DATE
 304 #define CONFIG_CMD_DHCP
 305 #define CONFIG_CMD_DTT
 306 #define CONFIG_CMD_EEPROM
 307 #define CONFIG_CMD_I2C
 308 #define CONFIG_CMD_NFS
 309 #define CONFIG_CMD_JFFS2
 310 #define CONFIG_CMD_MII
 311 #define CONFIG_CMD_PING
 312 #define CONFIG_CMD_REGINFO
 313 #define CONFIG_CMD_SNTP
 314
 315 #if defined(CONFIG_PCI)
 316     #define CONFIG_CMD_PCI
 317 #endif
 318
 319 #if defined(CONFIG_SYS_RAMBOOT)
 320     #undef CONFIG_CMD_SAVEENV
 321     #undef CONFIG_CMD_LOADS
 322 #endif
 323
 324 /*
 325  * Miscellaneous configurable options
 326  */
 327 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
 328 #define CONFIG_SYS_LOAD_ADDR            0x2000000       /* default load address */
 329 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt */
 330
 331 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 332 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 333
 334 #define CONFIG_SYS_HUSH_PARSER          1       /* Use the HUSH parser          */
 335 #ifdef  CONFIG_SYS_HUSH_PARSER
 336 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 337 #endif
 338
 339 #if defined(CONFIG_CMD_KGDB)
 340         #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 341 #else
 342         #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 343 #endif
 344
 345 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 346 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 347 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 348 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1ms ticks */
 349
 350 #undef CONFIG_WATCHDOG                          /* watchdog disabled */
 351
 352 /* pass open firmware flat tree */
 353 #define CONFIG_OF_LIBFDT        1
 354 #define CONFIG_OF_BOARD_SETUP   1
 355 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 356
 357 /*
 358  * For booting Linux, the board info and command line data
 359  * have to be in the first 256 MB of memory, since this is
 360  * the maximum mapped by the Linux kernel during initialization.
 361  */
 362 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)     /* Initial Memory map for Linux*/
 363
 364 #define CONFIG_SYS_HRCW_LOW (\
 365         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 366         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 367         HRCWL_CSB_TO_CLKIN_4X1 |\
 368         HRCWL_VCO_1X2 |\
 369         HRCWL_CORE_TO_CSB_2X1)
 370
 371 #if defined(PCI_64BIT)
 372 #define CONFIG_SYS_HRCW_HIGH (\
 373         HRCWH_PCI_HOST |\
 374         HRCWH_64_BIT_PCI |\
 375         HRCWH_PCI1_ARBITER_ENABLE |\
 376         HRCWH_PCI2_ARBITER_DISABLE |\
 377         HRCWH_CORE_ENABLE |\
 378         HRCWH_FROM_0X00000100 |\
 379         HRCWH_BOOTSEQ_DISABLE |\
 380         HRCWH_SW_WATCHDOG_DISABLE |\
 381         HRCWH_ROM_LOC_LOCAL_16BIT |\
 382         HRCWH_TSEC1M_IN_GMII |\
 383         HRCWH_TSEC2M_IN_GMII )
 384 #else
 385 #define CONFIG_SYS_HRCW_HIGH (\
 386         HRCWH_PCI_HOST |\
 387         HRCWH_32_BIT_PCI |\
 388         HRCWH_PCI1_ARBITER_ENABLE |\
 389         HRCWH_PCI2_ARBITER_DISABLE |\
 390         HRCWH_CORE_ENABLE |\
 391         HRCWH_FROM_0X00000100 |\
 392         HRCWH_BOOTSEQ_DISABLE |\
 393         HRCWH_SW_WATCHDOG_DISABLE |\
 394         HRCWH_ROM_LOC_LOCAL_16BIT |\
 395         HRCWH_TSEC1M_IN_GMII |\
 396         HRCWH_TSEC2M_IN_GMII )
 397 #endif
 398
 399 /* System IO Config */
 400 #define CONFIG_SYS_SICRH        0
 401 #define CONFIG_SYS_SICRL        SICRL_LDP_A
 402
 403 /* i-cache and d-cache disabled */
 404 #define CONFIG_SYS_HID0_INIT    0x000000000
 405 #define CONFIG_SYS_HID0_FINAL   (CONFIG_SYS_HID0_INIT | \
 406                                  HID0_ENABLE_INSTRUCTION_CACHE)
 407 #define CONFIG_SYS_HID2 HID2_HBE
 408
 409 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 410
 411 /* DDR 0 - 512M */
 412 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 413 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 414 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
 415 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 416
 417 /* stack in DCACHE @ 512M (no backing mem) */
 418 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 419 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 420
 421 /* PCI */
 422 #ifdef CONFIG_PCI
 423 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 424 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 425 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_MEMCOHERENCE | BATL_GUARDEDSTORAGE)
 426 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 427 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 428 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PCI1_IO_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
 429 #else
 430 #define CONFIG_SYS_IBAT3L       (0)
 431 #define CONFIG_SYS_IBAT3U       (0)
 432 #define CONFIG_SYS_IBAT4L       (0)
 433 #define CONFIG_SYS_IBAT4U       (0)
 434 #define CONFIG_SYS_IBAT5L       (0)
 435 #define CONFIG_SYS_IBAT5U       (0)
 436 #endif
 437
 438 /* IMMRBAR */
 439 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 440 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
 441
 442 /* FLASH */
 443 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 444 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 445
 446 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 447 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 448 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 449 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 450 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 451 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 452 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 453 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 454 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 455 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 456 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 457 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 458 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 459 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 460 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 461 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 462
 463 /*
 464  * Internal Definitions
 465  *
 466  * Boot Flags
 467  */
 468 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
 469 #define BOOTFLAG_WARM           0x02    /* Software reboot */
 470
 471 #if defined(CONFIG_CMD_KGDB)
 472 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 473 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 474 #endif
 475
 476 /*
 477  * Environment Configuration
 478  */
 479
 480 #define CONFIG_LOADADDR         400000  /* default location for tftp and bootm */
 481
 482 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 483 #undef  CONFIG_BOOTARGS                 /* the boot command will set bootargs */
 484
 485 #define CONFIG_BAUDRATE         115200
 486
 487 #define CONFIG_PREBOOT  "echo;" \
 488         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 489         "echo"
 490
 491 #undef  CONFIG_BOOTARGS
 492
 493 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 494         "netdev=eth0\0"                                                 \
 495         "hostname=tqm834x\0"                                            \
 496         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 497                 "nfsroot=${serverip}:${rootpath}\0"                     \
 498         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 499         "addip=setenv bootargs ${bootargs} "                            \
 500                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 501                 ":${hostname}:${netdev}:off panic=1\0"                  \
 502         "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 503         "flash_nfs_old=run nfsargs addip addcons;"                      \
 504                 "bootm ${kernel_addr}\0"                                \
 505         "flash_nfs=run nfsargs addip addcons;"                          \
 506                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 507         "flash_self_old=run ramargs addip addcons;"                     \
 508                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 509         "flash_self=run ramargs addip addcons;"                         \
 510                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 511         "net_nfs_old=tftp 400000 ${bootfile};"                          \
 512                 "run nfsargs addip addcons;bootm\0"                     \
 513         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 514                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
 515                 "run nfsargs addip addcons; "                           \
 516                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 517         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 518         "bootfile=tqm834x/uImage\0"                                     \
 519         "fdtfile=tqm834x/tqm834x.dtb\0"                                 \
 520         "kernel_addr_r=400000\0"                                        \
 521         "fdt_addr_r=600000\0"                                           \
 522         "ramdisk_addr_r=800000\0"                                       \
 523         "kernel_addr=800C0000\0"                                        \
 524         "fdt_addr=800A0000\0"                                           \
 525         "ramdisk_addr=80300000\0"                                       \
 526         "u-boot=tqm834x/u-boot.bin\0"                                   \
 527         "load=tftp 200000 ${u-boot}\0"                                  \
 528         "update=protect off 80000000 +${filesize};"                     \
 529                 "era 80000000 +${filesize};"                            \
 530                 "cp.b 200000 80000000 ${filesize}\0"                    \
 531         "upd=run load update\0"                                         \
 532         ""
 533
 534 #define CONFIG_BOOTCOMMAND      "run flash_self"
 535
 536 /*
 537  * JFFS2 partitions
 538  */
 539 /* mtdparts command line support */
 540 #define CONFIG_CMD_MTDPARTS
 541 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 542 #define CONFIG_FLASH_CFI_MTD
 543 #define MTDIDS_DEFAULT          "nor0=TQM834x-0"
 544
 545 /* default mtd partition table */
 546 #define MTDPARTS_DEFAULT        "mtdparts=TQM834x-0:256k(u-boot),256k(env),"\
 547                                                 "1m(kernel),2m(initrd),"\
 548                                                 "-(user);"\
 549
 550 #endif  /* __CONFIG_H */