Merge branch 'u-boot/master' into u-boot-arm/master
[oweals/u-boot.git] / include / configs / TQM834x.h
1 /*
2  * (C) Copyright 2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+ 
6  */
7
8 /*
9  * TQM8349 board configuration file
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 /*
16  * High Level Configuration Options
17  */
18 #define CONFIG_E300             1       /* E300 Family */
19 #define CONFIG_MPC83xx          1       /* MPC83xx family */
20 #define CONFIG_MPC834x          1       /* MPC834x specific */
21 #define CONFIG_MPC8349          1       /* MPC8349 specific */
22 #define CONFIG_TQM834X          1       /* TQM834X board specific */
23
24 #define CONFIG_SYS_TEXT_BASE    0x80000000
25
26 /* IMMR Base Address Register, use Freescale default: 0xff400000 */
27 #define CONFIG_SYS_IMMR         0xff400000
28
29 /* System clock. Primary input clock when in PCI host mode */
30 #define CONFIG_83XX_CLKIN       66666000        /* 66,666 MHz */
31
32 /*
33  * Local Bus LCRR
34  *    LCRR:  DLL bypass, Clock divider is 8
35  *
36  *    for CSB = 266 MHz it gives LCB clock frequency = 33 MHz
37  *
38  * External Local Bus rate is
39  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
40  */
41 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
42 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_8
43
44 /* board pre init: do not call, nothing to do */
45 #undef CONFIG_BOARD_EARLY_INIT_F
46
47 /* detect the number of flash banks */
48 #define CONFIG_BOARD_EARLY_INIT_R
49
50 /*
51  * DDR Setup
52  */
53                                 /* DDR is system memory*/
54 #define CONFIG_SYS_DDR_BASE     0x00000000
55 #define CONFIG_SYS_SDRAM_BASE   CONFIG_SYS_DDR_BASE
56 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
57 #define DDR_CASLAT_25           /* CASLAT set to 2.5 */
58 #undef CONFIG_DDR_ECC           /* only for ECC DDR module */
59 #undef CONFIG_SPD_EEPROM        /* do not use SPD EEPROM for DDR setup */
60
61 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
62 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
63 #define CONFIG_SYS_MEMTEST_END          0x00100000
64
65 /*
66  * FLASH on the Local Bus
67  */
68 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
69 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
70 #undef CONFIG_SYS_FLASH_CHECKSUM
71 #define CONFIG_SYS_FLASH_BASE           0x80000000      /* start of FLASH   */
72 #define CONFIG_SYS_FLASH_SIZE           8               /* FLASH size in MB */
73 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* print 'E' for empty sectors */
74 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
75
76 /*
77  * FLASH bank number detection
78  */
79
80 /*
81  * When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is defined, the actual number of
82  * Flash banks has to be determined at runtime and stored in a gloabl variable
83  * tqm834x_num_flash_banks. The value of CONFIG_SYS_MAX_FLASH_BANKS_DETECT is
84  * only used instead of CONFIG_SYS_MAX_FLASH_BANKS to allocate the array
85  * flash_info, and should be made sufficiently large to accomodate the number
86  * of banks that might actually be detected.  Since most (all?) Flash related
87  * functions use CONFIG_SYS_MAX_FLASH_BANKS as the number of actual banks on
88  * the board, it is defined as tqm834x_num_flash_banks.
89  */
90 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       2
91
92 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max sectors per device */
93
94 /* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */
95 #define CONFIG_SYS_BR0_PRELIM   ((CONFIG_SYS_FLASH_BASE & BR_BA) \
96                                 | BR_MS_GPCM \
97                                 | BR_PS_32 \
98                                 | BR_V)
99
100 /* FLASH timing (0x0000_0c54) */
101 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_GPCM_CSNT \
102                                         | OR_GPCM_ACS_DIV4 \
103                                         | OR_GPCM_SCY_5 \
104                                         | OR_GPCM_TRLX)
105
106 #define CONFIG_SYS_PRELIM_OR_AM         OR_AM_1GB /* OR addr mask: 1 GiB */
107
108 #define CONFIG_SYS_OR0_PRELIM           (CONFIG_SYS_PRELIM_OR_AM  \
109                                         | CONFIG_SYS_OR_TIMING_FLASH)
110
111 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_1GB)
112
113                                         /* Window base at flash base */
114 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
115
116 /* disable remaining mappings */
117 #define CONFIG_SYS_BR1_PRELIM           0x00000000
118 #define CONFIG_SYS_OR1_PRELIM           0x00000000
119 #define CONFIG_SYS_LBLAWBAR1_PRELIM     0x00000000
120 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x00000000
121
122 #define CONFIG_SYS_BR2_PRELIM           0x00000000
123 #define CONFIG_SYS_OR2_PRELIM           0x00000000
124 #define CONFIG_SYS_LBLAWBAR2_PRELIM     0x00000000
125 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x00000000
126
127 #define CONFIG_SYS_BR3_PRELIM           0x00000000
128 #define CONFIG_SYS_OR3_PRELIM           0x00000000
129 #define CONFIG_SYS_LBLAWBAR3_PRELIM     0x00000000
130 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x00000000
131
132 /*
133  * Monitor config
134  */
135 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
136
137 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
138 # define CONFIG_SYS_RAMBOOT
139 #else
140 # undef  CONFIG_SYS_RAMBOOT
141 #endif
142
143 #define CONFIG_SYS_INIT_RAM_LOCK        1
144 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000 /* Initial RAM address */
145 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM*/
146
147 #define CONFIG_SYS_GBL_DATA_OFFSET      \
148                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
149 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
150
151                                 /* Reserve 384 kB = 3 sect. for Mon */
152 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)
153                                 /* Reserve 512 kB for malloc */
154 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)
155
156 /*
157  * Serial Port
158  */
159 #define CONFIG_CONS_INDEX       1
160 #define CONFIG_SYS_NS16550
161 #define CONFIG_SYS_NS16550_SERIAL
162 #define CONFIG_SYS_NS16550_REG_SIZE     1
163 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
164
165 #define CONFIG_SYS_BAUDRATE_TABLE  \
166                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
167
168 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
169 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
170
171 /*
172  * I2C
173  */
174 #define CONFIG_SYS_I2C
175 #define CONFIG_SYS_I2C_FSL
176 #define CONFIG_SYS_FSL_I2C_SPEED        400000
177 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
178 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
179
180 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */
181 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
182 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2       /* 16 bit */
183 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5       /* 32 bytes/write */
184 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   12      /* 10ms +/- 20% */
185 #define CONFIG_SYS_I2C_MULTI_EEPROMS            /* more than one eeprom */
186
187 /* I2C RTC */
188 #define CONFIG_RTC_DS1337                       /* use ds1337 rtc via i2c */
189 #define CONFIG_SYS_I2C_RTC_ADDR         0x68    /* at address 0x68 */
190
191 /* I2C SYSMON (LM75) */
192 #define CONFIG_DTT_LM75                 1       /* ON Semi's LM75 */
193 #define CONFIG_DTT_SENSORS              {0}     /* Sensor addresses */
194 #define CONFIG_SYS_DTT_MAX_TEMP         70
195 #define CONFIG_SYS_DTT_LOW_TEMP         -30
196 #define CONFIG_SYS_DTT_HYSTERESIS       3
197
198 /*
199  * TSEC
200  */
201 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
202 #define CONFIG_MII
203
204 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
205 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
206 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
207 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
208
209 #if defined(CONFIG_TSEC_ENET)
210
211 #define CONFIG_TSEC1            1
212 #define CONFIG_TSEC1_NAME       "TSEC0"
213 #define CONFIG_TSEC2            1
214 #define CONFIG_TSEC2_NAME       "TSEC1"
215 #define TSEC1_PHY_ADDR          2
216 #define TSEC2_PHY_ADDR          1
217 #define TSEC1_PHYIDX            0
218 #define TSEC2_PHYIDX            0
219 #define TSEC1_FLAGS             TSEC_GIGABIT
220 #define TSEC2_FLAGS             TSEC_GIGABIT
221
222 /* Options are: TSEC[0-1] */
223 #define CONFIG_ETHPRIME         "TSEC0"
224
225 #endif  /* CONFIG_TSEC_ENET */
226
227 /*
228  * General PCI
229  * Addresses are mapped 1-1.
230  */
231 #define CONFIG_PCI
232
233 #if defined(CONFIG_PCI)
234
235 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
236 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
237
238 /* PCI1 host bridge */
239 #define CONFIG_SYS_PCI1_MEM_BASE        0x90000000
240 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
241 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
242 #define CONFIG_SYS_PCI1_MMIO_BASE       \
243                         (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
244 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
245 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
246 #define CONFIG_SYS_PCI1_IO_BASE         0xe2000000
247 #define CONFIG_SYS_PCI1_IO_PHYS         CONFIG_SYS_PCI1_IO_BASE
248 #define CONFIG_SYS_PCI1_IO_SIZE         0x1000000       /* 16M */
249
250 #undef CONFIG_EEPRO100
251 #define CONFIG_EEPRO100
252 #undef CONFIG_TULIP
253
254 #if !defined(CONFIG_PCI_PNP)
255         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BASE
256         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_MEM_BASE
257         #define PCI_IDSEL_NUMBER        0x1c    /* slot0 (IDSEL) = 28 */
258 #endif
259
260 #define CONFIG_SYS_PCI_SUBSYS_VENDORID          0x1957  /* Freescale */
261
262 #endif  /* CONFIG_PCI */
263
264 /*
265  * Environment
266  */
267 #define CONFIG_ENV_IS_IN_FLASH  1
268 #define CONFIG_ENV_ADDR         \
269                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
270 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) for env */
271 #define CONFIG_ENV_SIZE         0x8000  /*  32K max size */
272 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
273 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
274
275 #define CONFIG_LOADS_ECHO               1 /* echo on for serial download */
276 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1 /* allow baudrate change */
277
278 /*
279  * BOOTP options
280  */
281 #define CONFIG_BOOTP_BOOTFILESIZE
282 #define CONFIG_BOOTP_BOOTPATH
283 #define CONFIG_BOOTP_GATEWAY
284 #define CONFIG_BOOTP_HOSTNAME
285
286
287 /*
288  * Command line configuration.
289  */
290 #include <config_cmd_default.h>
291
292 #define CONFIG_CMD_ASKENV
293 #define CONFIG_CMD_DATE
294 #define CONFIG_CMD_DHCP
295 #define CONFIG_CMD_DTT
296 #define CONFIG_CMD_EEPROM
297 #define CONFIG_CMD_I2C
298 #define CONFIG_CMD_NFS
299 #define CONFIG_CMD_JFFS2
300 #define CONFIG_CMD_MII
301 #define CONFIG_CMD_PING
302 #define CONFIG_CMD_REGINFO
303 #define CONFIG_CMD_SNTP
304
305 #if defined(CONFIG_PCI)
306     #define CONFIG_CMD_PCI
307 #endif
308
309 #if defined(CONFIG_SYS_RAMBOOT)
310     #undef CONFIG_CMD_SAVEENV
311     #undef CONFIG_CMD_LOADS
312 #endif
313
314 /*
315  * Miscellaneous configurable options
316  */
317 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
318 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
319 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
320
321 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
322 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
323
324 #define CONFIG_SYS_HUSH_PARSER          1       /* Use the HUSH parser */
325
326 #if defined(CONFIG_CMD_KGDB)
327         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
328 #else
329         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
330 #endif
331
332                                 /* Print Buffer Size */
333 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
334 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
335                                 /* Boot Argument Buffer Size */
336 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
337 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks */
338
339 #undef CONFIG_WATCHDOG          /* watchdog disabled */
340
341 /* pass open firmware flat tree */
342 #define CONFIG_OF_LIBFDT        1
343 #define CONFIG_OF_BOARD_SETUP   1
344 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
345
346 /*
347  * For booting Linux, the board info and command line data
348  * have to be in the first 256 MB of memory, since this is
349  * the maximum mapped by the Linux kernel during initialization.
350  */
351                                 /* Initial Memory map for Linux */
352 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
353
354 #define CONFIG_SYS_HRCW_LOW (\
355         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
356         HRCWL_DDR_TO_SCB_CLK_1X1 |\
357         HRCWL_CSB_TO_CLKIN_4X1 |\
358         HRCWL_VCO_1X2 |\
359         HRCWL_CORE_TO_CSB_2X1)
360
361 #if defined(PCI_64BIT)
362 #define CONFIG_SYS_HRCW_HIGH (\
363         HRCWH_PCI_HOST |\
364         HRCWH_64_BIT_PCI |\
365         HRCWH_PCI1_ARBITER_ENABLE |\
366         HRCWH_PCI2_ARBITER_DISABLE |\
367         HRCWH_CORE_ENABLE |\
368         HRCWH_FROM_0X00000100 |\
369         HRCWH_BOOTSEQ_DISABLE |\
370         HRCWH_SW_WATCHDOG_DISABLE |\
371         HRCWH_ROM_LOC_LOCAL_16BIT |\
372         HRCWH_TSEC1M_IN_GMII |\
373         HRCWH_TSEC2M_IN_GMII)
374 #else
375 #define CONFIG_SYS_HRCW_HIGH (\
376         HRCWH_PCI_HOST |\
377         HRCWH_32_BIT_PCI |\
378         HRCWH_PCI1_ARBITER_ENABLE |\
379         HRCWH_PCI2_ARBITER_DISABLE |\
380         HRCWH_CORE_ENABLE |\
381         HRCWH_FROM_0X00000100 |\
382         HRCWH_BOOTSEQ_DISABLE |\
383         HRCWH_SW_WATCHDOG_DISABLE |\
384         HRCWH_ROM_LOC_LOCAL_16BIT |\
385         HRCWH_TSEC1M_IN_GMII |\
386         HRCWH_TSEC2M_IN_GMII)
387 #endif
388
389 /* System IO Config */
390 #define CONFIG_SYS_SICRH        0
391 #define CONFIG_SYS_SICRL        SICRL_LDP_A
392
393 /* i-cache and d-cache disabled */
394 #define CONFIG_SYS_HID0_INIT    0x000000000
395 #define CONFIG_SYS_HID0_FINAL   (CONFIG_SYS_HID0_INIT | \
396                                  HID0_ENABLE_INSTRUCTION_CACHE)
397 #define CONFIG_SYS_HID2 HID2_HBE
398
399 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
400
401 /* DDR 0 - 512M */
402 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
403                                 | BATL_PP_RW \
404                                 | BATL_MEMCOHERENCE)
405 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
406                                 | BATU_BL_256M \
407                                 | BATU_VS \
408                                 | BATU_VP)
409 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_BASE + 0x10000000 \
410                                 | BATL_PP_RW \
411                                 | BATL_MEMCOHERENCE)
412 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_BASE + 0x10000000 \
413                                 | BATU_BL_256M \
414                                 | BATU_VS \
415                                 | BATU_VP)
416
417 /* stack in DCACHE @ 512M (no backing mem) */
418 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_INIT_RAM_ADDR \
419                                 | BATL_PP_RW \
420                                 | BATL_MEMCOHERENCE)
421 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_INIT_RAM_ADDR \
422                                 | BATU_BL_128K \
423                                 | BATU_VS \
424                                 | BATU_VP)
425
426 /* PCI */
427 #ifdef CONFIG_PCI
428 #define CONFIG_PCI_INDIRECT_BRIDGE
429 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI1_MEM_BASE \
430                                 | BATL_PP_RW \
431                                 | BATL_MEMCOHERENCE)
432 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI1_MEM_BASE \
433                                 | BATU_BL_256M \
434                                 | BATU_VS \
435                                 | BATU_VP)
436 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI1_MMIO_BASE \
437                                 | BATL_PP_RW \
438                                 | BATL_MEMCOHERENCE \
439                                 | BATL_GUARDEDSTORAGE)
440 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI1_MMIO_BASE \
441                                 | BATU_BL_256M \
442                                 | BATU_VS \
443                                 | BATU_VP)
444 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PCI1_IO_BASE \
445                                 | BATL_PP_RW \
446                                 | BATL_CACHEINHIBIT \
447                                 | BATL_GUARDEDSTORAGE)
448 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PCI1_IO_BASE \
449                                 | BATU_BL_16M \
450                                 | BATU_VS \
451                                 | BATU_VP)
452 #else
453 #define CONFIG_SYS_IBAT3L       (0)
454 #define CONFIG_SYS_IBAT3U       (0)
455 #define CONFIG_SYS_IBAT4L       (0)
456 #define CONFIG_SYS_IBAT4U       (0)
457 #define CONFIG_SYS_IBAT5L       (0)
458 #define CONFIG_SYS_IBAT5U       (0)
459 #endif
460
461 /* IMMRBAR */
462 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_IMMR \
463                                 | BATL_PP_RW \
464                                 | BATL_CACHEINHIBIT \
465                                 | BATL_GUARDEDSTORAGE)
466 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_IMMR \
467                                 | BATU_BL_1M \
468                                 | BATU_VS \
469                                 | BATU_VP)
470
471 /* FLASH */
472 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_FLASH_BASE \
473                                 | BATL_PP_RW \
474                                 | BATL_CACHEINHIBIT \
475                                 | BATL_GUARDEDSTORAGE)
476 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_FLASH_BASE \
477                                 | BATU_BL_256M \
478                                 | BATU_VS \
479                                 | BATU_VP)
480
481 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
482 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
483 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
484 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
485 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
486 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
487 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
488 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
489 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
490 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
491 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
492 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
493 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
494 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
495 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
496 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
497
498 #if defined(CONFIG_CMD_KGDB)
499 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
500 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
501 #endif
502
503 /*
504  * Environment Configuration
505  */
506
507                                 /* default location for tftp and bootm */
508 #define CONFIG_LOADADDR         400000
509
510 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
511 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
512
513 #define CONFIG_BAUDRATE         115200
514
515 #define CONFIG_PREBOOT  "echo;" \
516         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
517         "echo"
518
519 #undef  CONFIG_BOOTARGS
520
521 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
522         "netdev=eth0\0"                                                 \
523         "hostname=tqm834x\0"                                            \
524         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
525                 "nfsroot=${serverip}:${rootpath}\0"                     \
526         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
527         "addip=setenv bootargs ${bootargs} "                            \
528                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
529                 ":${hostname}:${netdev}:off panic=1\0"                  \
530         "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
531         "flash_nfs_old=run nfsargs addip addcons;"                      \
532                 "bootm ${kernel_addr}\0"                                \
533         "flash_nfs=run nfsargs addip addcons;"                          \
534                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
535         "flash_self_old=run ramargs addip addcons;"                     \
536                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
537         "flash_self=run ramargs addip addcons;"                         \
538                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
539         "net_nfs_old=tftp 400000 ${bootfile};"                          \
540                 "run nfsargs addip addcons;bootm\0"                     \
541         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
542                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
543                 "run nfsargs addip addcons; "                           \
544                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
545         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
546         "bootfile=tqm834x/uImage\0"                                     \
547         "fdtfile=tqm834x/tqm834x.dtb\0"                                 \
548         "kernel_addr_r=400000\0"                                        \
549         "fdt_addr_r=600000\0"                                           \
550         "ramdisk_addr_r=800000\0"                                       \
551         "kernel_addr=800C0000\0"                                        \
552         "fdt_addr=800A0000\0"                                           \
553         "ramdisk_addr=80300000\0"                                       \
554         "u-boot=tqm834x/u-boot.bin\0"                                   \
555         "load=tftp 200000 ${u-boot}\0"                                  \
556         "update=protect off 80000000 +${filesize};"                     \
557                 "era 80000000 +${filesize};"                            \
558                 "cp.b 200000 80000000 ${filesize}\0"                    \
559         "upd=run load update\0"                                         \
560         ""
561
562 #define CONFIG_BOOTCOMMAND      "run flash_self"
563
564 /*
565  * JFFS2 partitions
566  */
567 /* mtdparts command line support */
568 #define CONFIG_CMD_MTDPARTS
569 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
570 #define CONFIG_FLASH_CFI_MTD
571 #define MTDIDS_DEFAULT          "nor0=TQM834x-0"
572
573 /* default mtd partition table */
574 #define MTDPARTS_DEFAULT        "mtdparts=TQM834x-0:256k(u-boot),256k(env)," \
575                                                 "1m(kernel),2m(initrd)," \
576                                                 "-(user);" \
577
578 #endif  /* __CONFIG_H */