2 * (C) Copyright 2003-2005
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * (C) Copyright 2004-2006
6 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
8 * See file CREDITS for list of people who contributed to this
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 * High Level Configuration Options
35 #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
36 #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
37 #define CONFIG_TQM5200 1 /* ... on TQM5200 module */
38 #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
40 /* On a Cameron or on a FO300 board or ... */
41 #if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
42 #define CONFIG_STK52XX 1 /* ... on a STK52XX board */
45 #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
47 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
48 #define BOOTFLAG_WARM 0x02 /* Software reboot */
50 #define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
51 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
52 # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
56 * Serial console configuration
58 #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
59 #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
60 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
63 #define CFG_DEVICE_NULLDEV 1 /* enable null device */
64 #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
65 #define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */
66 #define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */
68 #define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */
69 /* switch is closed */
72 #undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */
74 #endif /* CONFIG_FO300 */
77 #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
78 #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
79 #define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
80 #define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */
81 #define CONFIG_BOARD_EARLY_INIT_R
82 #endif /* CONFIG_STK52XX */
86 * 0x40000000 - 0x4fffffff - PCI Memory
87 * 0x50000000 - 0x50ffffff - PCI IO Space
91 #define CONFIG_PCI_PNP 1
92 /* #define CONFIG_PCI_SCAN_SHOW 1 */
94 #define CONFIG_PCI_MEM_BUS 0x40000000
95 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
96 #define CONFIG_PCI_MEM_SIZE 0x10000000
98 #define CONFIG_PCI_IO_BUS 0x50000000
99 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
100 #define CONFIG_PCI_IO_SIZE 0x01000000
102 #define CONFIG_NET_MULTI 1
103 #define CONFIG_EEPRO100 1
104 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
105 #define CONFIG_NS8382X 1
106 #endif /* CONFIG_STK52XX */
109 #define ADD_PCI_CMD CFG_CMD_PCI
111 #define ADD_PCI_CMD 0
117 #ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */
119 #define CONFIG_VIDEO_SM501
120 #define CONFIG_VIDEO_SM501_32BPP
121 #define CONFIG_CFB_CONSOLE
122 #define CONFIG_VIDEO_LOGO
125 #define CONFIG_CONSOLE_EXTRA_INFO
127 #define CONFIG_VIDEO_BMP_LOGO
130 #define CONFIG_VGA_AS_SINGLE_DEVICE
131 #define CONFIG_VIDEO_SW_CURSOR
132 #define CONFIG_SPLASH_SCREEN
133 #define CFG_CONSOLE_IS_IN_ENV
134 #endif /* #ifndef CONFIG_TQM5200S */
137 #define ADD_BMP_CMD CFG_CMD_BMP
139 #define ADD_BMP_CMD 0
143 #define CONFIG_MAC_PARTITION
144 #define CONFIG_DOS_PARTITION
145 #define CONFIG_ISO_PARTITION
148 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
149 #define CONFIG_USB_OHCI
150 #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
151 #define CONFIG_USB_STORAGE
153 #define ADD_USB_CMD 0
156 #ifndef CONFIG_CAM5200
158 #define CONFIG_POST (CFG_POST_MEMORY | \
164 #define CFG_CMD_POST_DIAG CFG_CMD_DIAG
165 /* preserve space for the post_word at end of on-chip SRAM */
166 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
168 #define CFG_CMD_POST_DIAG 0
172 #if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300)
173 #define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
175 #define ADD_IDE_CMD 0
181 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
195 CFG_CMD_POST_DIAG | \
200 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
201 #include <cmd_confdefs.h>
203 #define CONFIG_TIMESTAMP /* display image timestamps */
205 #if (TEXT_BASE != 0xFFF00000)
206 # define CFG_LOWBOOT 1 /* Boot low */
212 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
214 #define CONFIG_PREBOOT "echo;" \
215 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
218 #undef CONFIG_BOOTARGS
220 #if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT)
222 "update=protect off FFF00000 +${filesize};" \
223 "erase FFF00000 +${filesize};" \
224 "cp.b 200000 FFF00000 ${filesize};" \
225 "protect on FFF00000 +${filesize}\0"
226 #else /* default lowboot configuration */
228 "update=protect off FC000000 +${filesize};" \
229 "erase FC000000 +${filesize};" \
230 "cp.b 200000 FC000000 ${filesize};" \
231 "protect on FC000000 +${filesize}\0"
234 #ifndef CONFIG_CAM5200
235 #define CUSTOM_ENV_SETTINGS \
236 "bootfile=/tftpboot/tqm5200/uImage\0" \
237 "u-boot=/tftpboot/tqm5200/u-boot.bin\0"
239 #define CUSTOM_ENV_SETTINGS \
240 "bootfile=cam5200/uImage\0" \
241 "u-boot=cam5200/u-boot.bin\0" \
242 "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
245 #define CONFIG_EXTRA_ENV_SETTINGS \
247 "rootpath=/opt/eldk/ppc_6xx\0" \
248 "ramargs=setenv bootargs root=/dev/ram rw\0" \
249 "nfsargs=setenv bootargs root=/dev/nfs rw " \
250 "nfsroot=${serverip}:${rootpath}\0" \
251 "addip=setenv bootargs ${bootargs} " \
252 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
253 ":${hostname}:${netdev}:off panic=1\0" \
254 "addcons=setenv bootargs ${bootargs} " \
255 "console=ttyS0,${baudrate}\0" \
256 "flash_self=run ramargs addip addcons;" \
257 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
258 "flash_nfs=run nfsargs addip addcons;" \
259 "bootm ${kernel_addr}\0" \
260 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \
262 CUSTOM_ENV_SETTINGS \
263 "load=tftp 200000 ${u-boot}\0" \
267 #define CONFIG_BOOTCOMMAND "run net_nfs"
270 * IPB Bus clocking configuration.
272 #define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
274 #if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
276 * PCI Bus clocking configuration
278 * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
279 * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
280 * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
282 #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
288 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
289 #ifdef CONFIG_TQM5200_REV100
290 #define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
292 #define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
296 * I2C clock frequency
298 * Please notice, that the resulting clock frequency could differ from the
299 * configured value. This is because the I2C clock is derived from system
300 * clock over a frequency divider with only a few divider values. U-boot
301 * calculates the best approximation for CFG_I2C_SPEED. However the calculated
302 * approximation allways lies below the configured value, never above.
304 #define CFG_I2C_SPEED 100000 /* 100 kHz */
305 #define CFG_I2C_SLAVE 0x7F
308 * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
309 * also). For other EEPROMs configuration should be verified. On Mini-FAP the
310 * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
311 * same configuration could be used.
313 #define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
314 #define CFG_I2C_EEPROM_ADDR_LEN 2
315 #define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
316 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
319 * HW-Monitor configuration on Mini-FAP
321 #if defined (CONFIG_MINIFAP)
322 #define CFG_I2C_HWMON_ADDR 0x2C
325 /* List of I2C addresses to be verified by POST */
326 #if defined (CONFIG_MINIFAP)
328 #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \
329 CFG_I2C_HWMON_ADDR, \
334 * Flash configuration
336 #define CFG_FLASH_BASE 0xFC000000
338 #if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
339 #define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks
341 #define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */
342 #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
343 #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
345 #define CFG_FLASH_ADDR0 0x555
346 #define CFG_FLASH_ADDR1 0x2AA
347 #define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */
348 #define CFG_MAX_FLASH_SECT 128
350 /* use CFI flash driver */
351 #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
352 #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
353 #define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
354 #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
356 #define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
359 #define CFG_FLASH_EMPTY_INFO
360 #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
361 #define CFG_FLASH_USE_BUFFER_WRITE 1
363 #if defined (CONFIG_CAM5200)
364 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000)
365 #elif defined(CONFIG_TQM5200_B)
366 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000)
368 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
371 /* Dynamic MTD partition support */
372 #define CONFIG_JFFS2_CMDLINE
373 #define MTDIDS_DEFAULT "nor0=TQM5200-0"
375 #ifdef CONFIG_STK52XX
376 # if defined(CONFIG_TQM5200_B)
377 # if defined(CFG_LOWBOOT)
378 # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \
384 # else /* highboot */
385 # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:2560k(kernel)," \
391 # endif /* CFG_LOWBOOT */
392 # else /* !CONFIG_TQM5200_B */
393 # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
399 # endif /* CONFIG_TQM5200_B */
400 #elif defined (CONFIG_CAM5200)
401 # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \
405 #elif defined (CONFIG_FO300)
406 # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
413 # error "Unknown Carrier Board"
414 #endif /* CONFIG_STK52XX */
417 * Environment settings
419 #define CFG_ENV_IS_IN_FLASH 1
420 #define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */
421 #if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
422 #define CFG_ENV_SECT_SIZE 0x40000
424 #define CFG_ENV_SECT_SIZE 0x20000
425 #endif /* CONFIG_TQM5200_B */
426 #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
427 #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
432 #define CFG_MBAR 0xF0000000
433 #define CFG_SDRAM_BASE 0x00000000
434 #define CFG_DEFAULT_MBAR 0x80000000
436 /* Use ON-Chip SRAM until RAM will be available */
437 #define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
439 /* preserve space for the post_word at end of on-chip SRAM */
440 #define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
442 #define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
446 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
447 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
448 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
450 #define CFG_MONITOR_BASE TEXT_BASE
451 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
452 # define CFG_RAMBOOT 1
455 #if defined (CONFIG_CAM5200)
456 # define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
457 #elif defined(CONFIG_TQM5200_B)
458 # define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */
460 # define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
463 #define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */
464 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
467 * Ethernet configuration
469 #define CONFIG_MPC5xxx_FEC 1
471 * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
473 /* #define CONFIG_FEC_10MBIT 1 */
474 #define CONFIG_PHY_ADDR 0x00
479 * use CS1: Bit 0 (mask: 0x80000000):
480 * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1).
481 * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
482 * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
483 * SPI on PSC3 according to PSC3 setting. Use for CAM5200.
484 * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
485 * Use for REV200 STK52XX boards and FO300 boards. Do not use
486 * with REV100 modules (because, there I2C1 is used as I2C bus).
487 * use ATA: Bits 6-7 (mask 0x03000000):
488 * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects.
489 * Use for CAM5200 board.
490 * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards.
491 * use PSC6: Bits 9-11 (mask 0x00700000):
492 * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as
493 * UART, CODEC or IrDA.
494 * GPIO on PSC6_3 is used in post_hotkeys_pressed() to
495 * enable extended POST tests.
496 * Use for MINI-FAP and TQM5200_IB boards.
497 * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used.
498 * Extended POST test is not available.
499 * Use for STK52xx, FO300 and CAM5200 boards.
500 * use PCI_DIS: Bit 16 (mask 0x00008000):
501 * 1 -> disable PCI controller (on CAM5200 board).
502 * use USB: Bits 18-19 (mask 0x00003000):
503 * 10 -> two UARTs (on FO300 and CAM5200).
504 * use PSC3: Bits 20-23 (mask: 0x00000f00):
505 * 0000 -> All PSC3 pins are GPIOs.
506 * 1100 -> UART/SPI (on FO300 board).
507 * 0100 -> UART (on CAM5200 board).
508 * use PSC2: Bits 25:27 (mask: 0x00000030):
509 * 000 -> All PSC2 pins are GPIOs.
510 * 100 -> UART (on CAM5200 board).
511 * 001 -> CAN1/2 on PSC2 pins.
512 * Use for REV100 STK52xx boards
513 * 01x -> Use AC97 (on FO300 board).
514 * use PSC1: Bits 29-31 (mask: 0x00000007):
515 * 100 -> UART (on all boards).
517 #if defined (CONFIG_MINIFAP)
518 # define CFG_GPS_PORT_CONFIG 0x91000004
519 #elif defined (CONFIG_STK52XX)
520 # if defined (CONFIG_STK52XX_REV100)
521 # define CFG_GPS_PORT_CONFIG 0x81500014
522 # else /* STK52xx REV200 and above */
523 # if defined (CONFIG_TQM5200_REV100)
524 # error TQM5200 REV100 not supported on STK52XX REV200 or above
525 # else/* TQM5200 REV200 and above */
526 # define CFG_GPS_PORT_CONFIG 0x91500004
529 #elif defined (CONFIG_FO300)
530 # define CFG_GPS_PORT_CONFIG 0x91502c24
531 #elif defined (CONFIG_CAM5200)
532 # define CFG_GPS_PORT_CONFIG 0x8050A444
533 #else /* TMQ5200 Inbetriebnahme-Board */
534 # define CFG_GPS_PORT_CONFIG 0x81000004
540 #if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
541 # define CONFIG_RTC_M41T11 1
542 # define CFG_I2C_RTC_ADDR 0x68
543 # define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base
546 # define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
550 * Miscellaneous configurable options
552 #define CFG_LONGHELP /* undef to save memory */
553 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
555 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
556 #define CFG_HUSH_PARSER 1 /* use "hush" command parser */
557 #define CFG_PROMPT_HUSH_PS2 "> "
559 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
560 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
562 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
564 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
565 #define CFG_MAXARGS 16 /* max number of command args */
566 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
568 /* Enable an alternate, more extensive memory test */
569 #define CFG_ALT_MEMTEST
571 #define CFG_MEMTEST_START 0x00100000 /* memtest works on */
572 #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
574 #define CFG_LOAD_ADDR 0x100000 /* default load address */
576 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
579 * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
580 * which is normally part of the default commands (CFV_CMD_DFL)
585 * Various low-level settings
587 #if defined(CONFIG_MPC5200)
588 #define CFG_HID0_INIT HID0_ICE | HID0_ICFI
589 #define CFG_HID0_FINAL HID0_ICE
591 #define CFG_HID0_INIT 0
592 #define CFG_HID0_FINAL 0
595 #define CFG_BOOTCS_START CFG_FLASH_BASE
596 #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
597 #ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
598 #define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
600 #define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
602 #define CFG_CS0_START CFG_FLASH_BASE
603 #define CFG_CS0_SIZE CFG_FLASH_SIZE
605 #define CONFIG_LAST_STAGE_INIT
608 * SRAM - Do not map below 2 GB in address space, because this area is used
609 * for SDRAM autosizing.
611 #define CFG_CS2_START 0xE5000000
612 #define CFG_CS2_SIZE 0x100000 /* 1 MByte */
613 #define CFG_CS2_CFG 0x0004D930
616 * Grafic controller - Do not map below 2 GB in address space, because this
617 * area is used for SDRAM autosizing.
619 #define SM501_FB_BASE 0xE0000000
620 #define CFG_CS1_START (SM501_FB_BASE)
621 #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
622 #define CFG_CS1_CFG 0x8F48FF70
623 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
625 #define CFG_CS_BURST 0x00000000
626 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
628 #if defined(CONFIG_CAM5200)
629 #define CFG_CS4_START 0xB0000000
630 #define CFG_CS4_SIZE 0x00010000
631 #define CFG_CS4_CFG 0x01019C10
633 #define CFG_CS5_START 0xD0000000
634 #define CFG_CS5_SIZE 0x01208000
635 #define CFG_CS5_CFG 0x1414BF10
638 #define CFG_RESET_ADDRESS 0xff000000
640 /*-----------------------------------------------------------------------
642 *-----------------------------------------------------------------------
644 #define CONFIG_USB_CLOCK 0x0001BBBB
645 #define CONFIG_USB_CONFIG 0x00001000
647 /*-----------------------------------------------------------------------
648 * IDE/ATA stuff Supports IDE harddisk
649 *-----------------------------------------------------------------------
652 #undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
654 #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
655 #undef CONFIG_IDE_LED /* LED for ide not supported */
657 #define CONFIG_IDE_RESET /* reset for ide supported */
658 #define CONFIG_IDE_PREINIT
660 #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
661 #define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
663 #define CFG_ATA_IDE0_OFFSET 0x0000
665 #define CFG_ATA_BASE_ADDR MPC5XXX_ATA
667 /* Offset for data I/O */
668 #define CFG_ATA_DATA_OFFSET (0x0060)
670 /* Offset for normal register accesses */
671 #define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
673 /* Offset for alternate registers */
674 #define CFG_ATA_ALT_OFFSET (0x005C)
676 /* Interval between registers */
677 #define CFG_ATA_STRIDE 4
679 #endif /* __CONFIG_H */