include/configs/T102xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T1024/T1023 RDB board configuration file
   8  */
   9
  10 #ifndef __T1024RDB_H
  11 #define __T1024RDB_H
  12
  13 /* High Level Configuration Options */
  14 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  15 #define CONFIG_ENABLE_36BIT_PHYS
  16
  17 #ifdef CONFIG_PHYS_64BIT
  18 #define CONFIG_ADDR_MAP         1
  19 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  20 #endif
  21
  22 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  23 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  24
  25 #define CONFIG_ENV_OVERWRITE
  26
  27 /* support deep sleep */
  28 #ifdef CONFIG_ARCH_T1024
  29 #define CONFIG_DEEP_SLEEP
  30 #endif
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  34 #define CONFIG_SPL_FLUSH_IMAGE
  35 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  36 #define CONFIG_SPL_PAD_TO               0x40000
  37 #define CONFIG_SPL_MAX_SIZE             0x28000
  38 #define RESET_VECTOR_OFFSET             0x27FFC
  39 #define BOOT_PAGE_OFFSET                0x27000
  40 #ifdef CONFIG_SPL_BUILD
  41 #define CONFIG_SPL_SKIP_RELOCATE
  42 #define CONFIG_SPL_COMMON_INIT_DDR
  43 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  44 #endif
  45
  46 #ifdef CONFIG_NAND
  47 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  48 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  49 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  50 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  51 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  52 #if defined(CONFIG_TARGET_T1024RDB)
  53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  54 #elif defined(CONFIG_TARGET_T1023RDB)
  55 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  56 #endif
  57 #define CONFIG_SPL_NAND_BOOT
  58 #endif
  59
  60 #ifdef CONFIG_SPIFLASH
  61 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  62 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  64 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  67 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  68 #ifndef CONFIG_SPL_BUILD
  69 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  70 #endif
  71 #if defined(CONFIG_TARGET_T1024RDB)
  72 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  73 #elif defined(CONFIG_TARGET_T1023RDB)
  74 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  75 #endif
  76 #define CONFIG_SPL_SPI_BOOT
  77 #endif
  78
  79 #ifdef CONFIG_SDCARD
  80 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  81 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  82 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  83 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  84 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  85 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  86 #ifndef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  88 #endif
  89 #if defined(CONFIG_TARGET_T1024RDB)
  90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
  91 #elif defined(CONFIG_TARGET_T1023RDB)
  92 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
  93 #endif
  94 #define CONFIG_SPL_MMC_BOOT
  95 #endif
  96
  97 #endif /* CONFIG_RAMBOOT_PBL */
  98
  99 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 100 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 101 #endif
 102
 103 /* PCIe Boot - Master */
 104 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 105 /*
 106  * for slave u-boot IMAGE instored in master memory space,
 107  * PHYS must be aligned based on the SIZE
 108  */
 109 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 110 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 111 #ifdef CONFIG_PHYS_64BIT
 112 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 113 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 114 #else
 115 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 116 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 117 #endif
 118 /*
 119  * for slave UCODE and ENV instored in master memory space,
 120  * PHYS must be aligned based on the SIZE
 121  */
 122 #ifdef CONFIG_PHYS_64BIT
 123 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 124 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 125 #else
 126 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 127 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 128 #endif
 129 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 130 /* slave core release by master*/
 131 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 132 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 133
 134 /* PCIe Boot - Slave */
 135 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 136 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 137 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 138                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 139 /* Set 1M boot space for PCIe boot */
 140 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 141 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 142                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 143 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 144 #endif
 145
 146 #if defined(CONFIG_SPIFLASH)
 147 #define CONFIG_ENV_SPI_BUS              0
 148 #define CONFIG_ENV_SPI_CS               0
 149 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 150 #define CONFIG_ENV_SPI_MODE             0
 151 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 152 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 153 #if defined(CONFIG_TARGET_T1024RDB)
 154 #define CONFIG_ENV_SECT_SIZE            0x10000
 155 #elif defined(CONFIG_TARGET_T1023RDB)
 156 #define CONFIG_ENV_SECT_SIZE            0x40000
 157 #endif
 158 #elif defined(CONFIG_SDCARD)
 159 #define CONFIG_SYS_MMC_ENV_DEV          0
 160 #define CONFIG_ENV_SIZE                 0x2000
 161 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 162 #elif defined(CONFIG_NAND)
 163 #define CONFIG_ENV_SIZE                 0x2000
 164 #if defined(CONFIG_TARGET_T1024RDB)
 165 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 166 #elif defined(CONFIG_TARGET_T1023RDB)
 167 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 168 #endif
 169 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 170 #define CONFIG_ENV_ADDR         0xffe20000
 171 #define CONFIG_ENV_SIZE         0x2000
 172 #elif defined(CONFIG_ENV_IS_NOWHERE)
 173 #define CONFIG_ENV_SIZE         0x2000
 174 #else
 175 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 176 #define CONFIG_ENV_SIZE         0x2000
 177 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 178 #endif
 179
 180 #ifndef __ASSEMBLY__
 181 unsigned long get_board_sys_clk(void);
 182 unsigned long get_board_ddr_clk(void);
 183 #endif
 184
 185 #define CONFIG_SYS_CLK_FREQ     100000000
 186 #define CONFIG_DDR_CLK_FREQ     100000000
 187
 188 /*
 189  * These can be toggled for performance analysis, otherwise use default.
 190  */
 191 #define CONFIG_SYS_CACHE_STASHING
 192 #define CONFIG_BACKSIDE_L2_CACHE
 193 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 194 #define CONFIG_BTB                      /* toggle branch predition */
 195 #define CONFIG_DDR_ECC
 196 #ifdef CONFIG_DDR_ECC
 197 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 198 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 199 #endif
 200
 201 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 202 #define CONFIG_SYS_MEMTEST_END          0x00400000
 203
 204 /*
 205  *  Config the L3 Cache as L3 SRAM
 206  */
 207 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 208 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 209 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 210 #ifdef CONFIG_RAMBOOT_PBL
 211 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 212 #endif
 213 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 214 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 215 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 216
 217 #ifdef CONFIG_PHYS_64BIT
 218 #define CONFIG_SYS_DCSRBAR              0xf0000000
 219 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 220 #endif
 221
 222 /* EEPROM */
 223 #define CONFIG_ID_EEPROM
 224 #define CONFIG_SYS_I2C_EEPROM_NXID
 225 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 226 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 227 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 228 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 229 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 230
 231 /*
 232  * DDR Setup
 233  */
 234 #define CONFIG_VERY_BIG_RAM
 235 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 236 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 237 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 238 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 239 #if defined(CONFIG_TARGET_T1024RDB)
 240 #define CONFIG_DDR_SPD
 241 #define CONFIG_SYS_SPD_BUS_NUM  0
 242 #define SPD_EEPROM_ADDRESS      0x51
 243 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 244 #elif defined(CONFIG_TARGET_T1023RDB)
 245 #define CONFIG_SYS_DDR_RAW_TIMING
 246 #define CONFIG_SYS_SDRAM_SIZE   2048
 247 #endif
 248
 249 /*
 250  * IFC Definitions
 251  */
 252 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 253 #ifdef CONFIG_PHYS_64BIT
 254 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 255 #else
 256 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 257 #endif
 258
 259 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 260 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 261                                 CSPR_PORT_SIZE_16 | \
 262                                 CSPR_MSEL_NOR | \
 263                                 CSPR_V)
 264 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 265
 266 /* NOR Flash Timing Params */
 267 #if defined(CONFIG_TARGET_T1024RDB)
 268 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 269 #elif defined(CONFIG_TARGET_T1023RDB)
 270 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 271                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 272 #endif
 273 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 274                                 FTIM0_NOR_TEADC(0x5) | \
 275                                 FTIM0_NOR_TEAHC(0x5))
 276 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 277                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 278                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 279 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 280                                 FTIM2_NOR_TCH(0x4) | \
 281                                 FTIM2_NOR_TWPH(0x0E) | \
 282                                 FTIM2_NOR_TWP(0x1c))
 283 #define CONFIG_SYS_NOR_FTIM3    0x0
 284
 285 #define CONFIG_SYS_FLASH_QUIET_TEST
 286 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 287
 288 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 289 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 290 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 291 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 292
 293 #define CONFIG_SYS_FLASH_EMPTY_INFO
 294 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 295
 296 #ifdef CONFIG_TARGET_T1024RDB
 297 /* CPLD on IFC */
 298 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 299 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 300 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 301 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 302                                                 | CSPR_PORT_SIZE_8 \
 303                                                 | CSPR_MSEL_GPCM \
 304                                                 | CSPR_V)
 305 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 306 #define CONFIG_SYS_CSOR2                0x0
 307
 308 /* CPLD Timing parameters for IFC CS2 */
 309 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 310                                                 FTIM0_GPCM_TEADC(0x0e) | \
 311                                                 FTIM0_GPCM_TEAHC(0x0e))
 312 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 313                                                 FTIM1_GPCM_TRAD(0x1f))
 314 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 315                                                 FTIM2_GPCM_TCH(0x8) | \
 316                                                 FTIM2_GPCM_TWP(0x1f))
 317 #define CONFIG_SYS_CS2_FTIM3            0x0
 318 #endif
 319
 320 /* NAND Flash on IFC */
 321 #define CONFIG_NAND_FSL_IFC
 322 #define CONFIG_SYS_NAND_BASE            0xff800000
 323 #ifdef CONFIG_PHYS_64BIT
 324 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 325 #else
 326 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 327 #endif
 328 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 329 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 330                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 331                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 332                                 | CSPR_V)
 333 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 334
 335 #if defined(CONFIG_TARGET_T1024RDB)
 336 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 337                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 338                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 339                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 340                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 341                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 342                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 343 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 344 #elif defined(CONFIG_TARGET_T1023RDB)
 345 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 346                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 347                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 348                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 349                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 350                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 351                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 352 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 353 #endif
 354
 355 #define CONFIG_SYS_NAND_ONFI_DETECTION
 356 /* ONFI NAND Flash mode0 Timing Params */
 357 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 358                                         FTIM0_NAND_TWP(0x18)   | \
 359                                         FTIM0_NAND_TWCHT(0x07) | \
 360                                         FTIM0_NAND_TWH(0x0a))
 361 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 362                                         FTIM1_NAND_TWBE(0x39)  | \
 363                                         FTIM1_NAND_TRR(0x0e)   | \
 364                                         FTIM1_NAND_TRP(0x18))
 365 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 366                                         FTIM2_NAND_TREH(0x0a) | \
 367                                         FTIM2_NAND_TWHRE(0x1e))
 368 #define CONFIG_SYS_NAND_FTIM3           0x0
 369
 370 #define CONFIG_SYS_NAND_DDR_LAW         11
 371 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 372 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 373
 374 #if defined(CONFIG_NAND)
 375 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 376 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 377 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 378 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 379 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 380 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 381 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 382 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 383 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 384 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 385 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 386 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 387 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 388 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 389 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 390 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 391 #else
 392 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 393 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 394 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 395 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 396 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 397 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 398 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 399 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 400 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 401 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 402 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 403 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 404 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 405 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 406 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 407 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 408 #endif
 409
 410 #ifdef CONFIG_SPL_BUILD
 411 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 412 #else
 413 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 414 #endif
 415
 416 #if defined(CONFIG_RAMBOOT_PBL)
 417 #define CONFIG_SYS_RAMBOOT
 418 #endif
 419
 420 #define CONFIG_HWCONFIG
 421
 422 /* define to use L1 as initial stack */
 423 #define CONFIG_L1_INIT_RAM
 424 #define CONFIG_SYS_INIT_RAM_LOCK
 425 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 426 #ifdef CONFIG_PHYS_64BIT
 427 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 428 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 429 /* The assembler doesn't like typecast */
 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 431         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 432           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 433 #else
 434 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 435 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 436 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 437 #endif
 438 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 439
 440 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 441                                         GENERATED_GBL_DATA_SIZE)
 442 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 443
 444 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 445 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 446
 447 /* Serial Port */
 448 #define CONFIG_SYS_NS16550_SERIAL
 449 #define CONFIG_SYS_NS16550_REG_SIZE     1
 450 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 451
 452 #define CONFIG_SYS_BAUDRATE_TABLE       \
 453         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 454
 455 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 456 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 457 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 458 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 459
 460 /* Video */
 461 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 462 #ifdef CONFIG_FSL_DIU_FB
 463 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 464 #define CONFIG_VIDEO_LOGO
 465 #define CONFIG_VIDEO_BMP_LOGO
 466 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 467 /*
 468  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 469  * disable empty flash sector detection, which is I/O-intensive.
 470  */
 471 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 472 #endif
 473
 474 /* I2C */
 475 #define CONFIG_SYS_I2C
 476 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 477 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 478 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 479 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 480 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 481 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 482 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 483
 484 #define I2C_PCA6408_BUS_NUM             1
 485 #define I2C_PCA6408_ADDR                0x20
 486
 487 /* I2C bus multiplexer */
 488 #define I2C_MUX_CH_DEFAULT      0x8
 489
 490 /*
 491  * RTC configuration
 492  */
 493 #define RTC
 494 #define CONFIG_RTC_DS1337       1
 495 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 496
 497 /*
 498  * eSPI - Enhanced SPI
 499  */
 500 #define CONFIG_SF_DEFAULT_SPEED 10000000
 501 #define CONFIG_SF_DEFAULT_MODE  0
 502
 503 /*
 504  * General PCIe
 505  * Memory space is mapped 1-1, but I/O space must start from 0.
 506  */
 507 #define CONFIG_PCIE1            /* PCIE controller 1 */
 508 #define CONFIG_PCIE2            /* PCIE controller 2 */
 509 #define CONFIG_PCIE3            /* PCIE controller 3 */
 510 #ifdef CONFIG_ARCH_T1040
 511 #define CONFIG_PCIE4            /* PCIE controller 4 */
 512 #endif
 513 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 514 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 515 #define CONFIG_PCI_INDIRECT_BRIDGE
 516
 517 #ifdef CONFIG_PCI
 518 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 519 #ifdef CONFIG_PCIE1
 520 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 521 #ifdef CONFIG_PHYS_64BIT
 522 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 523 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 524 #else
 525 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 526 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 527 #endif
 528 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 529 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 530 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 531 #ifdef CONFIG_PHYS_64BIT
 532 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 533 #else
 534 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 535 #endif
 536 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 537 #endif
 538
 539 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 540 #ifdef CONFIG_PCIE2
 541 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 542 #ifdef CONFIG_PHYS_64BIT
 543 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 544 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 545 #else
 546 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 547 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 548 #endif
 549 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 550 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 551 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 552 #ifdef CONFIG_PHYS_64BIT
 553 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 554 #else
 555 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 556 #endif
 557 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 558 #endif
 559
 560 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 561 #ifdef CONFIG_PCIE3
 562 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 563 #ifdef CONFIG_PHYS_64BIT
 564 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 565 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 566 #else
 567 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 568 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 569 #endif
 570 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 571 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 572 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 573 #ifdef CONFIG_PHYS_64BIT
 574 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 575 #else
 576 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 577 #endif
 578 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 579 #endif
 580
 581 /* controller 4, Base address 203000, to be removed */
 582 #ifdef CONFIG_PCIE4
 583 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 584 #ifdef CONFIG_PHYS_64BIT
 585 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 586 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 587 #else
 588 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 589 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 590 #endif
 591 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 592 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 593 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 594 #ifdef CONFIG_PHYS_64BIT
 595 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 596 #else
 597 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 598 #endif
 599 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 600 #endif
 601
 602 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 603 #endif  /* CONFIG_PCI */
 604
 605 /*
 606  * USB
 607  */
 608 #define CONFIG_HAS_FSL_DR_USB
 609
 610 #ifdef CONFIG_HAS_FSL_DR_USB
 611 #define CONFIG_USB_EHCI_FSL
 612 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 613 #endif
 614
 615 /*
 616  * SDHC
 617  */
 618 #ifdef CONFIG_MMC
 619 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 620 #endif
 621
 622 /* Qman/Bman */
 623 #ifndef CONFIG_NOBQFMAN
 624 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 625 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 626 #ifdef CONFIG_PHYS_64BIT
 627 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 628 #else
 629 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 630 #endif
 631 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 632 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 633 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 634 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 635 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 636 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 637                                         CONFIG_SYS_BMAN_CENA_SIZE)
 638 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 639 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 640 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 641 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 642 #ifdef CONFIG_PHYS_64BIT
 643 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 644 #else
 645 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 646 #endif
 647 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 648 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 649 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 650 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 651 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 652 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 653                                         CONFIG_SYS_QMAN_CENA_SIZE)
 654 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 655 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 656
 657 #define CONFIG_SYS_DPAA_FMAN
 658
 659 #ifdef CONFIG_TARGET_T1024RDB
 660 #define CONFIG_QE
 661 #endif
 662 /* Default address of microcode for the Linux FMan driver */
 663 #if defined(CONFIG_SPIFLASH)
 664 /*
 665  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 666  * env, so we got 0x110000.
 667  */
 668 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 669 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 670 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 671 #elif defined(CONFIG_SDCARD)
 672 /*
 673  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 674  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 675  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 676  */
 677 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 678 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 679 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 680 #elif defined(CONFIG_NAND)
 681 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 682 #if defined(CONFIG_TARGET_T1024RDB)
 683 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 684 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 685 #elif defined(CONFIG_TARGET_T1023RDB)
 686 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 687 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 688 #endif
 689 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 690 /*
 691  * Slave has no ucode locally, it can fetch this from remote. When implementing
 692  * in two corenet boards, slave's ucode could be stored in master's memory
 693  * space, the address can be mapped from slave TLB->slave LAW->
 694  * slave SRIO or PCIE outbound window->master inbound window->
 695  * master LAW->the ucode address in master's memory space.
 696  */
 697 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 698 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 699 #else
 700 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 701 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 702 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 703 #endif
 704 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 705 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 706 #endif /* CONFIG_NOBQFMAN */
 707
 708 #ifdef CONFIG_SYS_DPAA_FMAN
 709 #define CONFIG_FMAN_ENET
 710 #define CONFIG_PHY_REALTEK
 711 #if defined(CONFIG_TARGET_T1024RDB)
 712 #define RGMII_PHY1_ADDR         0x2
 713 #define RGMII_PHY2_ADDR         0x6
 714 #define SGMII_AQR_PHY_ADDR      0x2
 715 #define FM1_10GEC1_PHY_ADDR     0x1
 716 #elif defined(CONFIG_TARGET_T1023RDB)
 717 #define RGMII_PHY1_ADDR         0x1
 718 #define SGMII_RTK_PHY_ADDR      0x3
 719 #define SGMII_AQR_PHY_ADDR      0x2
 720 #endif
 721 #endif
 722
 723 #ifdef CONFIG_FMAN_ENET
 724 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 725 #endif
 726
 727 /*
 728  * Dynamic MTD Partition support with mtdparts
 729  */
 730
 731 /*
 732  * Environment
 733  */
 734 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 735 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 736
 737 /*
 738  * Miscellaneous configurable options
 739  */
 740 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 741
 742 /*
 743  * For booting Linux, the board info and command line data
 744  * have to be in the first 64 MB of memory, since this is
 745  * the maximum mapped by the Linux kernel during initialization.
 746  */
 747 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 748 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 749
 750 #ifdef CONFIG_CMD_KGDB
 751 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 752 #endif
 753
 754 /*
 755  * Environment Configuration
 756  */
 757 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 758 #define CONFIG_BOOTFILE         "uImage"
 759 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 760 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 761 #define __USB_PHY_TYPE          utmi
 762
 763 #ifdef CONFIG_ARCH_T1024
 764 #define CONFIG_BOARDNAME t1024rdb
 765 #define BANK_INTLV cs0_cs1
 766 #else
 767 #define CONFIG_BOARDNAME t1023rdb
 768 #define BANK_INTLV  null
 769 #endif
 770
 771 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 772         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 773         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 774         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 775         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 776         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 777         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 778         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 779         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 780         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 781         "netdev=eth0\0"                                         \
 782         "tftpflash=tftpboot $loadaddr $uboot && "               \
 783         "protect off $ubootaddr +$filesize && "                 \
 784         "erase $ubootaddr +$filesize && "                       \
 785         "cp.b $loadaddr $ubootaddr $filesize && "               \
 786         "protect on $ubootaddr +$filesize && "                  \
 787         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 788         "consoledev=ttyS0\0"                                    \
 789         "ramdiskaddr=2000000\0"                                 \
 790         "fdtaddr=1e00000\0"                                     \
 791         "bdev=sda3\0"
 792
 793 #define CONFIG_LINUX                                    \
 794         "setenv bootargs root=/dev/ram rw "             \
 795         "console=$consoledev,$baudrate $othbootargs;"   \
 796         "setenv ramdiskaddr 0x02000000;"                \
 797         "setenv fdtaddr 0x00c00000;"                    \
 798         "setenv loadaddr 0x1000000;"                    \
 799         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 800
 801 #define CONFIG_NFSBOOTCOMMAND                   \
 802         "setenv bootargs root=/dev/nfs rw "     \
 803         "nfsroot=$serverip:$rootpath "          \
 804         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 805         "console=$consoledev,$baudrate $othbootargs;"   \
 806         "tftp $loadaddr $bootfile;"             \
 807         "tftp $fdtaddr $fdtfile;"               \
 808         "bootm $loadaddr - $fdtaddr"
 809
 810 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 811
 812 #include <asm/fsl_secure_boot.h>
 813
 814 #endif  /* __T1024RDB_H */