include/configs/T102xQDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T1024/T1023 QDS board configuration file
   8  */
   9
  10 #ifndef __T1024QDS_H
  11 #define __T1024QDS_H
  12
  13 /* High Level Configuration Options */
  14 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  15 #define CONFIG_ENABLE_36BIT_PHYS
  16
  17 #ifdef CONFIG_PHYS_64BIT
  18 #define CONFIG_ADDR_MAP         1
  19 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  20 #endif
  21
  22 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  23 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  24
  25 #define CONFIG_ENV_OVERWRITE
  26
  27 #define CONFIG_DEEP_SLEEP
  28
  29 #ifdef CONFIG_RAMBOOT_PBL
  30 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  33 #define CONFIG_SPL_PAD_TO               0x40000
  34 #define CONFIG_SPL_MAX_SIZE             0x28000
  35 #define RESET_VECTOR_OFFSET             0x27FFC
  36 #define BOOT_PAGE_OFFSET                0x27000
  37 #ifdef CONFIG_SPL_BUILD
  38 #define CONFIG_SPL_SKIP_RELOCATE
  39 #define CONFIG_SPL_COMMON_INIT_DDR
  40 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  41 #endif
  42
  43 #ifdef CONFIG_NAND
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  45 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  46 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  47 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  48 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  49 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg
  50 #define CONFIG_SPL_NAND_BOOT
  51 #endif
  52
  53 #ifdef CONFIG_SPIFLASH
  54 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  55 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  56 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  57 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  58 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  59 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  60 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  61 #ifndef CONFIG_SPL_BUILD
  62 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  63 #endif
  64 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg
  65 #define CONFIG_SPL_SPI_BOOT
  66 #endif
  67
  68 #ifdef CONFIG_SDCARD
  69 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  70 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  71 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  72 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  73 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  74 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  75 #ifndef CONFIG_SPL_BUILD
  76 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  77 #endif
  78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg
  79 #define CONFIG_SPL_MMC_BOOT
  80 #endif
  81
  82 #endif /* CONFIG_RAMBOOT_PBL */
  83
  84 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  85 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  86 #endif
  87
  88 #ifdef CONFIG_MTD_NOR_FLASH
  89 #define CONFIG_FLASH_CFI_DRIVER
  90 #define CONFIG_SYS_FLASH_CFI
  91 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  92 #endif
  93
  94 /* PCIe Boot - Master */
  95 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  96 /*
  97  * for slave u-boot IMAGE instored in master memory space,
  98  * PHYS must be aligned based on the SIZE
  99  */
 100 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 101 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 102 #ifdef CONFIG_PHYS_64BIT
 103 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 104 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 105 #else
 106 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 107 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 108 #endif
 109 /*
 110  * for slave UCODE and ENV instored in master memory space,
 111  * PHYS must be aligned based on the SIZE
 112  */
 113 #ifdef CONFIG_PHYS_64BIT
 114 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 115 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 116 #else
 117 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 118 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 119 #endif
 120 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 121 /* slave core release by master*/
 122 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 123 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 124
 125 /* PCIe Boot - Slave */
 126 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 127 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 128 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 129                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 130 /* Set 1M boot space for PCIe boot */
 131 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 132 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 133                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 134 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 135 #endif
 136
 137 #if defined(CONFIG_SPIFLASH)
 138 #define CONFIG_SYS_EXTRA_ENV_RELOC
 139 #define CONFIG_ENV_SPI_BUS              0
 140 #define CONFIG_ENV_SPI_CS               0
 141 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 142 #define CONFIG_ENV_SPI_MODE             0
 143 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 144 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 145 #define CONFIG_ENV_SECT_SIZE            0x10000
 146 #elif defined(CONFIG_SDCARD)
 147 #define CONFIG_SYS_EXTRA_ENV_RELOC
 148 #define CONFIG_SYS_MMC_ENV_DEV          0
 149 #define CONFIG_ENV_SIZE                 0x2000
 150 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 151 #elif defined(CONFIG_NAND)
 152 #define CONFIG_SYS_EXTRA_ENV_RELOC
 153 #define CONFIG_ENV_SIZE                 0x2000
 154 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 155 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 156 #define CONFIG_ENV_ADDR         0xffe20000
 157 #define CONFIG_ENV_SIZE         0x2000
 158 #elif defined(CONFIG_ENV_IS_NOWHERE)
 159 #define CONFIG_ENV_SIZE         0x2000
 160 #else
 161 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 162 #define CONFIG_ENV_SIZE         0x2000
 163 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 164 #endif
 165
 166 #ifndef __ASSEMBLY__
 167 unsigned long get_board_sys_clk(void);
 168 unsigned long get_board_ddr_clk(void);
 169 #endif
 170
 171 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 172 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 173
 174 /*
 175  * These can be toggled for performance analysis, otherwise use default.
 176  */
 177 #define CONFIG_SYS_CACHE_STASHING
 178 #define CONFIG_BACKSIDE_L2_CACHE
 179 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 180 #define CONFIG_BTB                      /* toggle branch predition */
 181 #define CONFIG_DDR_ECC
 182 #ifdef CONFIG_DDR_ECC
 183 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 184 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 185 #endif
 186
 187 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 188 #define CONFIG_SYS_MEMTEST_END          0x00400000
 189
 190 /*
 191  *  Config the L3 Cache as L3 SRAM
 192  */
 193 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 194 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 195 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 196 #ifdef CONFIG_RAMBOOT_PBL
 197 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 198 #endif
 199 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 200 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 201 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 202
 203 #ifdef CONFIG_PHYS_64BIT
 204 #define CONFIG_SYS_DCSRBAR              0xf0000000
 205 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 206 #endif
 207
 208 /* EEPROM */
 209 #define CONFIG_ID_EEPROM
 210 #define CONFIG_SYS_I2C_EEPROM_NXID
 211 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 212 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 213 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 214 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 215 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 216
 217 /*
 218  * DDR Setup
 219  */
 220 #define CONFIG_VERY_BIG_RAM
 221 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 222 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 223 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 224 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 225 #define CONFIG_DDR_SPD
 226
 227 #define CONFIG_SYS_SPD_BUS_NUM  0
 228 #define SPD_EEPROM_ADDRESS      0x51
 229
 230 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 231
 232 /*
 233  * IFC Definitions
 234  */
 235 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 236 #ifdef CONFIG_PHYS_64BIT
 237 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 238 #else
 239 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 240 #endif
 241
 242 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 243 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 244                                 + 0x8000000) | \
 245                                 CSPR_PORT_SIZE_16 | \
 246                                 CSPR_MSEL_NOR | \
 247                                 CSPR_V)
 248 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 249 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 250                                 CSPR_PORT_SIZE_16 | \
 251                                 CSPR_MSEL_NOR | \
 252                                 CSPR_V)
 253 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 254 /* NOR Flash Timing Params */
 255 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 256 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 257                                 FTIM0_NOR_TEADC(0x5) | \
 258                                 FTIM0_NOR_TEAHC(0x5))
 259 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 260                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 261                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 262 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 263                                 FTIM2_NOR_TCH(0x4) | \
 264                                 FTIM2_NOR_TWPH(0x0E) | \
 265                                 FTIM2_NOR_TWP(0x1c))
 266 #define CONFIG_SYS_NOR_FTIM3    0x0
 267
 268 #define CONFIG_SYS_FLASH_QUIET_TEST
 269 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 270
 271 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 272 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 273 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 274 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 275
 276 #define CONFIG_SYS_FLASH_EMPTY_INFO
 277 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 278                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 279 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 280 #define QIXIS_BASE              0xffdf0000
 281 #ifdef CONFIG_PHYS_64BIT
 282 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 283 #else
 284 #define QIXIS_BASE_PHYS         QIXIS_BASE
 285 #endif
 286 #define QIXIS_LBMAP_SWITCH              0x06
 287 #define QIXIS_LBMAP_MASK                0x0f
 288 #define QIXIS_LBMAP_SHIFT               0
 289 #define QIXIS_LBMAP_DFLTBANK            0x00
 290 #define QIXIS_LBMAP_ALTBANK             0x04
 291 #define QIXIS_RST_CTL_RESET             0x31
 292 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 293 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 294 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 295 #define QIXIS_RST_FORCE_MEM             0x01
 296
 297 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 298 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 299                                 | CSPR_PORT_SIZE_8 \
 300                                 | CSPR_MSEL_GPCM \
 301                                 | CSPR_V)
 302 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 303 #define CONFIG_SYS_CSOR3        0x0
 304 /* QIXIS Timing parameters for IFC CS3 */
 305 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 306                                         FTIM0_GPCM_TEADC(0x0e) | \
 307                                         FTIM0_GPCM_TEAHC(0x0e))
 308 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 309                                         FTIM1_GPCM_TRAD(0x3f))
 310 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 311                                         FTIM2_GPCM_TCH(0x8) | \
 312                                         FTIM2_GPCM_TWP(0x1f))
 313 #define CONFIG_SYS_CS3_FTIM3            0x0
 314
 315 #define CONFIG_NAND_FSL_IFC
 316 #define CONFIG_SYS_NAND_BASE            0xff800000
 317 #ifdef CONFIG_PHYS_64BIT
 318 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 319 #else
 320 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 321 #endif
 322 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 323 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 324                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 325                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 326                                 | CSPR_V)
 327 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 328
 329 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 330                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 331                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 332                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 333                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 334                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 335                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 336
 337 #define CONFIG_SYS_NAND_ONFI_DETECTION
 338
 339 /* ONFI NAND Flash mode0 Timing Params */
 340 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 341                                         FTIM0_NAND_TWP(0x18)   | \
 342                                         FTIM0_NAND_TWCHT(0x07) | \
 343                                         FTIM0_NAND_TWH(0x0a))
 344 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 345                                         FTIM1_NAND_TWBE(0x39)  | \
 346                                         FTIM1_NAND_TRR(0x0e)   | \
 347                                         FTIM1_NAND_TRP(0x18))
 348 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 349                                         FTIM2_NAND_TREH(0x0a) | \
 350                                         FTIM2_NAND_TWHRE(0x1e))
 351 #define CONFIG_SYS_NAND_FTIM3           0x0
 352
 353 #define CONFIG_SYS_NAND_DDR_LAW         11
 354 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 355 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 356
 357 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 358
 359 #if defined(CONFIG_NAND)
 360 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 361 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 362 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 363 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 364 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 365 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 366 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 367 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 368 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 369 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 370 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 371 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 372 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 373 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 374 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 375 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 376 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 377 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 378 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 379 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 380 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 381 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 382 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 383 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 384 #else
 385 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 386 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 387 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 388 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 389 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 390 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 391 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 392 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 393 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 394 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 395 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 396 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 397 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 398 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 399 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 400 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 401 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 402 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 403 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 404 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 405 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 406 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 407 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 408 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 409 #endif
 410
 411 #ifdef CONFIG_SPL_BUILD
 412 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 413 #else
 414 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 415 #endif
 416
 417 #if defined(CONFIG_RAMBOOT_PBL)
 418 #define CONFIG_SYS_RAMBOOT
 419 #endif
 420
 421 #define CONFIG_MISC_INIT_R
 422
 423 #define CONFIG_HWCONFIG
 424
 425 /* define to use L1 as initial stack */
 426 #define CONFIG_L1_INIT_RAM
 427 #define CONFIG_SYS_INIT_RAM_LOCK
 428 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 429 #ifdef CONFIG_PHYS_64BIT
 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 432 /* The assembler doesn't like typecast */
 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 434         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 435           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 436 #else
 437 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 438 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 439 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 440 #endif
 441 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 442
 443 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 444                                         GENERATED_GBL_DATA_SIZE)
 445 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 446
 447 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 448 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 449
 450 /* Serial Port */
 451 #define CONFIG_SYS_NS16550_SERIAL
 452 #define CONFIG_SYS_NS16550_REG_SIZE     1
 453 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 454
 455 #define CONFIG_SYS_BAUDRATE_TABLE       \
 456         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 457
 458 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 459 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 460 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 461 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 462
 463 /* Video */
 464 #ifdef CONFIG_ARCH_T1024                /* no DIU on T1023 */
 465 #define CONFIG_FSL_DIU_FB
 466 #ifdef CONFIG_FSL_DIU_FB
 467 #define CONFIG_FSL_DIU_CH7301
 468 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 469 #define CONFIG_VIDEO_LOGO
 470 #define CONFIG_VIDEO_BMP_LOGO
 471 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 472 /*
 473  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 474  * disable empty flash sector detection, which is I/O-intensive.
 475  */
 476 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 477 #endif
 478 #endif
 479
 480 /* I2C */
 481 #define CONFIG_SYS_I2C
 482 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 483 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 484 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 485 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 486 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 487 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 488 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 489
 490 #define I2C_MUX_PCA_ADDR                0x77
 491 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 492 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 493 #define I2C_RETIMER_ADDR                0x18
 494
 495 /* I2C bus multiplexer */
 496 #define I2C_MUX_CH_DEFAULT      0x8
 497 #define I2C_MUX_CH_DIU          0xC
 498 #define I2C_MUX_CH5             0xD
 499 #define I2C_MUX_CH7             0xF
 500
 501 /* LDI/DVI Encoder for display */
 502 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 503 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 504
 505 /*
 506  * RTC configuration
 507  */
 508 #define RTC
 509 #define CONFIG_RTC_DS3231       1
 510 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 511
 512 /*
 513  * eSPI - Enhanced SPI
 514  */
 515 #define CONFIG_SPI_FLASH_BAR
 516 #define CONFIG_SF_DEFAULT_SPEED  10000000
 517 #define CONFIG_SF_DEFAULT_MODE    0
 518
 519 /*
 520  * General PCIe
 521  * Memory space is mapped 1-1, but I/O space must start from 0.
 522  */
 523 #define CONFIG_PCIE1            /* PCIE controller 1 */
 524 #define CONFIG_PCIE2            /* PCIE controller 2 */
 525 #define CONFIG_PCIE3            /* PCIE controller 3 */
 526 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 527 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 528 #define CONFIG_PCI_INDIRECT_BRIDGE
 529
 530 #ifdef CONFIG_PCI
 531 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 532 #ifdef CONFIG_PCIE1
 533 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 534 #ifdef CONFIG_PHYS_64BIT
 535 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 536 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 537 #else
 538 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 539 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 540 #endif
 541 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 542 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 543 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 544 #ifdef CONFIG_PHYS_64BIT
 545 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 546 #else
 547 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 548 #endif
 549 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 550 #endif
 551
 552 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 553 #ifdef CONFIG_PCIE2
 554 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 555 #ifdef CONFIG_PHYS_64BIT
 556 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 557 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 558 #else
 559 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 560 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 561 #endif
 562 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 563 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 564 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 565 #ifdef CONFIG_PHYS_64BIT
 566 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 567 #else
 568 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 569 #endif
 570 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 571 #endif
 572
 573 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 574 #ifdef CONFIG_PCIE3
 575 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 576 #ifdef CONFIG_PHYS_64BIT
 577 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 578 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 579 #else
 580 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 581 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 582 #endif
 583 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 584 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 585 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 586 #ifdef CONFIG_PHYS_64BIT
 587 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 588 #else
 589 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 590 #endif
 591 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 592 #endif
 593
 594 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 595 #endif  /* CONFIG_PCI */
 596
 597 /*
 598  *SATA
 599  */
 600 #define CONFIG_FSL_SATA_V2
 601 #ifdef CONFIG_FSL_SATA_V2
 602 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 603 #define CONFIG_SATA1
 604 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 605 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 606 #define CONFIG_LBA48
 607 #endif
 608
 609 /*
 610  * USB
 611  */
 612 #define CONFIG_HAS_FSL_DR_USB
 613
 614 #ifdef CONFIG_HAS_FSL_DR_USB
 615 #define CONFIG_USB_EHCI_FSL
 616 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 617 #endif
 618
 619 /*
 620  * SDHC
 621  */
 622 #ifdef CONFIG_MMC
 623 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 624 #endif
 625
 626 /* Qman/Bman */
 627 #ifndef CONFIG_NOBQFMAN
 628 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 629 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 630 #ifdef CONFIG_PHYS_64BIT
 631 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 632 #else
 633 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 634 #endif
 635 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 636 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 637 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 638 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 639 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 640 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 641                                         CONFIG_SYS_BMAN_CENA_SIZE)
 642 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 643 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 644 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 645 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 646 #ifdef CONFIG_PHYS_64BIT
 647 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 648 #else
 649 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 650 #endif
 651 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 652 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 653 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 654 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 655 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 656 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 657                                         CONFIG_SYS_QMAN_CENA_SIZE)
 658 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 659 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 660
 661 #define CONFIG_SYS_DPAA_FMAN
 662
 663 #define CONFIG_QE
 664 #define CONFIG_U_QE
 665 /* Default address of microcode for the Linux FMan driver */
 666 #if defined(CONFIG_SPIFLASH)
 667 /*
 668  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 669  * env, so we got 0x110000.
 670  */
 671 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 672 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 673 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 674 #elif defined(CONFIG_SDCARD)
 675 /*
 676  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 677  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 678  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 679  */
 680 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 681 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 682 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 683 #elif defined(CONFIG_NAND)
 684 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 685 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 686 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 687 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 688 /*
 689  * Slave has no ucode locally, it can fetch this from remote. When implementing
 690  * in two corenet boards, slave's ucode could be stored in master's memory
 691  * space, the address can be mapped from slave TLB->slave LAW->
 692  * slave SRIO or PCIE outbound window->master inbound window->
 693  * master LAW->the ucode address in master's memory space.
 694  */
 695 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 696 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 697 #else
 698 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 699 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 700 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 701 #endif
 702 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 703 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 704 #endif /* CONFIG_NOBQFMAN */
 705
 706 #ifdef CONFIG_SYS_DPAA_FMAN
 707 #define CONFIG_FMAN_ENET
 708 #define CONFIG_PHYLIB_10G
 709 #define CONFIG_PHY_VITESSE
 710 #define CONFIG_PHY_REALTEK
 711 #define CONFIG_PHY_TERANETICS
 712 #define RGMII_PHY1_ADDR         0x1
 713 #define RGMII_PHY2_ADDR         0x2
 714 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 715 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 716 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 717 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 718 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 719 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 720 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 721 #endif
 722
 723 #ifdef CONFIG_FMAN_ENET
 724 #define CONFIG_MII              /* MII PHY management */
 725 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 726 #endif
 727
 728 /*
 729  * Dynamic MTD Partition support with mtdparts
 730  */
 731 #ifdef CONFIG_MTD_NOR_FLASH
 732 #define CONFIG_FLASH_CFI_MTD
 733 #endif
 734
 735 /*
 736  * Environment
 737  */
 738 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 739 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 740
 741 /*
 742  * Miscellaneous configurable options
 743  */
 744 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 745
 746 /*
 747  * For booting Linux, the board info and command line data
 748  * have to be in the first 64 MB of memory, since this is
 749  * the maximum mapped by the Linux kernel during initialization.
 750  */
 751 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 752 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 753
 754 #ifdef CONFIG_CMD_KGDB
 755 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 756 #endif
 757
 758 /*
 759  * Environment Configuration
 760  */
 761 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 762 #define CONFIG_BOOTFILE         "uImage"
 763 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 764 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 765 #define __USB_PHY_TYPE          utmi
 766
 767 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 768         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 769         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 770         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 771         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 772         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 773         "netdev=eth0\0"                                         \
 774         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 775         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 776         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 777         "tftpflash=tftpboot $loadaddr $uboot && "               \
 778         "protect off $ubootaddr +$filesize && "                 \
 779         "erase $ubootaddr +$filesize && "                       \
 780         "cp.b $loadaddr $ubootaddr $filesize && "               \
 781         "protect on $ubootaddr +$filesize && "                  \
 782         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 783         "consoledev=ttyS0\0"                                    \
 784         "ramdiskaddr=2000000\0"                                 \
 785         "fdtaddr=d00000\0"                                      \
 786         "bdev=sda3\0"
 787
 788 #define CONFIG_LINUX                                    \
 789         "setenv bootargs root=/dev/ram rw "             \
 790         "console=$consoledev,$baudrate $othbootargs;"   \
 791         "setenv ramdiskaddr 0x02000000;"                \
 792         "setenv fdtaddr 0x00c00000;"                    \
 793         "setenv loadaddr 0x1000000;"                    \
 794         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 795
 796 #define CONFIG_NFSBOOTCOMMAND                   \
 797         "setenv bootargs root=/dev/nfs rw "     \
 798         "nfsroot=$serverip:$rootpath "          \
 799         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 800         "console=$consoledev,$baudrate $othbootargs;"   \
 801         "tftp $loadaddr $bootfile;"             \
 802         "tftp $fdtaddr $fdtfile;"               \
 803         "bootm $loadaddr - $fdtaddr"
 804
 805 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 806
 807 #include <asm/fsl_secure_boot.h>
 808
 809 #endif  /* __T1024QDS_H */