2 * (C) Copyright 2001 - 2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 /* ------------------------------------------------------------------------- */
26 * Configuration settings for the SL8245 board.
29 /* ------------------------------------------------------------------------- */
32 * board/config.h - configuration options, board specific
39 * High Level Configuration Options
43 #define CONFIG_MPC824X 1
44 #define CONFIG_MPC8245 1
45 #define CONFIG_SL8245 1
48 #define CONFIG_CONS_INDEX 1
49 #define CONFIG_BAUDRATE 115200
50 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
52 #define CONFIG_BOOTDELAY 5
54 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
58 * Command line configuration.
60 #include <config_cmd_default.h>
62 #define CONFIG_CMD_PCI
66 * Miscellaneous configurable options
68 #undef CFG_LONGHELP /* undef to save memory */
69 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
70 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
74 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
75 #define CFG_MAXARGS 32 /* Max number of command args */
76 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
77 #define CFG_LOAD_ADDR 0x00400000 /* Default load address */
79 /*-----------------------------------------------------------------------
80 * Start addresses for the final memory configuration
81 * (Set up by the startup code)
82 * Please note that CFG_SDRAM_BASE _must_ start at 0
84 #define CFG_SDRAM_BASE 0x00000000
86 #define CFG_FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank on RCS#0 */
87 #define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
88 #define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM }
90 #define CFG_RESET_ADDRESS 0xFFF00100
92 #define CFG_EUMB_ADDR 0xFC000000
94 #define CFG_MONITOR_BASE TEXT_BASE
95 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
96 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
98 #define CFG_MEMTEST_START 0x00004000 /* memtest works on */
99 #define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
101 /* Maximum amount of RAM.
103 #define CFG_MAX_RAM_SIZE 0x10000000 /* 0 .. 256 MB of (S)DRAM */
106 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
113 * NS16550 Configuration
116 #define CFG_NS16550_SERIAL
118 #define CFG_NS16550_REG_SIZE 1
120 #define CFG_NS16550_CLK get_bus_freq(0)
122 #define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
124 /*-----------------------------------------------------------------------
125 * Definitions for initial stack pointer and data area
128 #define CFG_GBL_DATA_SIZE 128
129 #define CFG_INIT_RAM_ADDR 0x40000000
130 #define CFG_INIT_RAM_END 0x1000
131 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
134 * Low Level Configuration Settings
135 * (address mappings, register initial values, etc.)
136 * You should know what you are doing if you make changes here.
137 * For the detail description refer to the MPC8240 user's manual.
140 #define CONFIG_SYS_CLK_FREQ 66666666 /* external frequency to pll */
143 /* Bit-field values for MCCR1.
147 #define CFG_BANK0_ROW 2
149 /* Bit-field values for MCCR2.
151 #define CFG_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
153 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
155 #define CFG_BSTOPRE 192
157 /* Bit-field values for MCCR3.
159 #define CFG_REFREC 2 /* Refresh to activate interval */
161 /* Bit-field values for MCCR4.
163 #define CFG_PRETOACT 2 /* Precharge to activate interval */
164 #define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
165 #define CFG_ACTORW 3 /* FIXME was 2 */
166 #define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
167 #define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
168 #define CFG_REGISTERD_TYPE_BUFFER 1
170 #define CFG_REGDIMM 0
172 #define CFG_ODCR 0xff /* configures line driver impedances, */
173 /* see 8245 book for bit definitions */
174 #define CFG_PGMAX 0x32 /* how long the 8245 retains the */
175 /* currently accessed page in memory */
176 /* see 8245 book for details */
178 /* Memory bank settings.
179 * Only bits 20-29 are actually used from these vales to set the
180 * start/end addresses. The upper two bits will always be 0, and the lower
181 * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
182 * address. Refer to the MPC8240 book.
185 #define CFG_BANK0_START 0x00000000
186 #define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
187 #define CFG_BANK0_ENABLE 1
188 #define CFG_BANK1_START 0x3ff00000
189 #define CFG_BANK1_END 0x3fffffff
190 #define CFG_BANK1_ENABLE 0
191 #define CFG_BANK2_START 0x3ff00000
192 #define CFG_BANK2_END 0x3fffffff
193 #define CFG_BANK2_ENABLE 0
194 #define CFG_BANK3_START 0x3ff00000
195 #define CFG_BANK3_END 0x3fffffff
196 #define CFG_BANK3_ENABLE 0
197 #define CFG_BANK4_START 0x3ff00000
198 #define CFG_BANK4_END 0x3fffffff
199 #define CFG_BANK4_ENABLE 0
200 #define CFG_BANK5_START 0x3ff00000
201 #define CFG_BANK5_END 0x3fffffff
202 #define CFG_BANK5_ENABLE 0
203 #define CFG_BANK6_START 0x3ff00000
204 #define CFG_BANK6_END 0x3fffffff
205 #define CFG_BANK6_ENABLE 0
206 #define CFG_BANK7_START 0x3ff00000
207 #define CFG_BANK7_END 0x3fffffff
208 #define CFG_BANK7_ENABLE 0
210 #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
211 #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
213 #define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
214 #define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
216 #define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
217 #define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
219 #define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
220 #define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
222 #define CFG_DBAT0L CFG_IBAT0L
223 #define CFG_DBAT0U CFG_IBAT0U
224 #define CFG_DBAT1L CFG_IBAT1L
225 #define CFG_DBAT1U CFG_IBAT1U
226 #define CFG_DBAT2L CFG_IBAT2L
227 #define CFG_DBAT2U CFG_IBAT2U
228 #define CFG_DBAT3L CFG_IBAT3L
229 #define CFG_DBAT3U CFG_IBAT3U
232 * For booting Linux, the board info and command line data
233 * have to be in the first 8 MB of memory, since this is
234 * the maximum mapped by the Linux kernel during initialization.
236 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
238 /*-----------------------------------------------------------------------
241 #define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
242 #define CFG_MAX_FLASH_SECT 35 /* Max number of sectors per flash */
244 #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
245 #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
248 /* Warining: environment is not EMBEDDED in the U-Boot code.
249 * It's stored in flash separately.
251 #define CFG_ENV_IS_IN_FLASH 1
252 #define CFG_ENV_ADDR 0xFFFF0000
253 #define CFG_ENV_SIZE 0x00010000 /* Size of the Environment */
254 #define CFG_ENV_SECT_SIZE 0x00010000 /* Size of the Environment Sector */
256 /*-----------------------------------------------------------------------
257 * Cache Configuration
259 #define CFG_CACHELINE_SIZE 32
260 #if defined(CONFIG_CMD_KGDB)
261 # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
265 * Internal Definitions
269 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
270 #define BOOTFLAG_WARM 0x02 /* Software reboot */
272 /*-----------------------------------------------------------------------
274 *-----------------------------------------------------------------------
277 #define CONFIG_PCI_PNP
278 #undef CONFIG_PCI_SCAN_SHOW
282 #define CONFIG_NET_MULTI
285 #endif /* __CONFIG_H */