include/configs/P1022DS.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
   4  *          Timur Tabi <timur@freescale.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License as published by the Free
   8  * Software Foundation; either version 2 of the License, or (at your option)
   9  * any later version.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_36BIT
  18 #define CONFIG_PHYS_64BIT
  19 #endif
  20
  21 /* High Level Configuration Options */
  22 #define CONFIG_BOOKE                    /* BOOKE */
  23 #define CONFIG_E500                     /* BOOKE e500 family */
  24 #define CONFIG_MPC85xx                  /* MPC8540/60/55/41/48 */
  25 #define CONFIG_P1022
  26 #define CONFIG_P1022DS
  27 #define CONFIG_MP                       /* support multiple processors */
  28
  29 #ifndef CONFIG_SYS_TEXT_BASE
  30 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  31 #endif
  32
  33 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  35 #endif
  36
  37 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  38 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  39 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
  40 #define CONFIG_PCIE2                    /* PCIE controler 2 (slot 2) */
  41 #define CONFIG_PCIE3                    /* PCIE controler 3 (ULI bridge) */
  42 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  43 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  44 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  45
  46 #ifdef CONFIG_PHYS_64BIT
  47 #define CONFIG_ENABLE_36BIT_PHYS
  48 #define CONFIG_ADDR_MAP
  49 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  50 #endif
  51
  52 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  53
  54 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
  55 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  56 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  57
  58 /*
  59  * These can be toggled for performance analysis, otherwise use default.
  60  */
  61 #define CONFIG_L2_CACHE
  62 #define CONFIG_BTB
  63
  64 #define CONFIG_SYS_MEMTEST_START        0x00000000
  65 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
  66
  67 /*
  68  * Base addresses -- Note these are effective addresses where the
  69  * actual resources get mapped (not physical addresses)
  70  */
  71 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  72 #define CONFIG_SYS_CCSRBAR              0xffe00000      /* relocated CCSRBAR */
  73 #ifdef CONFIG_PHYS_64BIT
  74 #define CONFIG_SYS_CCSRBAR_PHYS         0xfffe00000ull
  75 #else
  76 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR
  77 #endif
  78 #define CONFIG_SYS_IMMR                 CONFIG_SYS_CCSRBAR
  79
  80 /* DDR Setup */
  81 #define CONFIG_DDR_SPD
  82 #define CONFIG_VERY_BIG_RAM
  83 #define CONFIG_FSL_DDR3
  84
  85 #ifdef CONFIG_DDR_ECC
  86 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  87 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  88 #endif
  89
  90 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  91 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  92
  93 #define CONFIG_NUM_DDR_CONTROLLERS      1
  94 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  95 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  96
  97 /* I2C addresses of SPD EEPROMs */
  98 #define CONFIG_SYS_SPD_BUS_NUM          1
  99 #define SPD_EEPROM_ADDRESS              0x51    /* CTLR 0 DIMM 0 */
 100
 101 /*
 102  * Memory map
 103  *
 104  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 105  * 0x8000_0000  0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
 106  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
 107  *
 108  * Localbus cacheable (TBD)
 109  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 110  *
 111  * Localbus non-cacheable
 112  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 113  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 114  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 115  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 116  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 117  */
 118
 119 /*
 120  * Local Bus Definitions
 121  */
 122 #define CONFIG_SYS_FLASH_BASE           0xe0000000 /* start of FLASH 128M */
 123 #ifdef CONFIG_PHYS_64BIT
 124 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 125 #else
 126 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 127 #endif
 128
 129 #define CONFIG_FLASH_BR_PRELIM  \
 130         (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
 131 #define CONFIG_FLASH_OR_PRELIM  (OR_AM_128MB | 0xff7)
 132
 133 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 134 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 135
 136 #define CONFIG_SYS_BR1_PRELIM   \
 137         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 138 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM
 139
 140 #define CONFIG_SYS_FLASH_BANKS_LIST     \
 141         {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 142 #define CONFIG_SYS_FLASH_QUIET_TEST
 143 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 144
 145 #define CONFIG_SYS_MAX_FLASH_BANKS      2
 146 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 147
 148 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 149
 150 #define CONFIG_FLASH_CFI_DRIVER
 151 #define CONFIG_SYS_FLASH_CFI
 152 #define CONFIG_SYS_FLASH_EMPTY_INFO
 153
 154 #define CONFIG_BOARD_EARLY_INIT_F
 155 #define CONFIG_BOARD_EARLY_INIT_R
 156 #define CONFIG_MISC_INIT_R
 157 #define CONFIG_HWCONFIG
 158
 159 #define CONFIG_FSL_NGPIXIS
 160 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 161 #ifdef CONFIG_PHYS_64BIT
 162 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 163 #else
 164 #define PIXIS_BASE_PHYS         PIXIS_BASE
 165 #endif
 166
 167 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 168 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB | 0x6ff7)
 169
 170 #define PIXIS_LBMAP_SWITCH      7
 171 #define PIXIS_LBMAP_MASK        0xF0
 172 #define PIXIS_LBMAP_ALTBANK     0x20
 173
 174 #define CONFIG_SYS_INIT_RAM_LOCK
 175 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 176 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000 /* Size of used area in RAM */
 177
 178 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 179         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 180 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 181
 182 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 183 #define CONFIG_SYS_MALLOC_LEN           (6 * 1024 * 1024)
 184
 185 /*
 186  * Serial Port
 187  */
 188 #define CONFIG_CONS_INDEX               1
 189 #define CONFIG_SYS_NS16550
 190 #define CONFIG_SYS_NS16550_SERIAL
 191 #define CONFIG_SYS_NS16550_REG_SIZE     1
 192 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 193
 194 #define CONFIG_SYS_BAUDRATE_TABLE       \
 195         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 196
 197 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 198 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 199
 200 /* Use the HUSH parser */
 201 #define CONFIG_SYS_HUSH_PARSER
 202 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 203
 204 /* Video */
 205 #ifdef CONFIG_FSL_DIU_FB
 206 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 207 #define CONFIG_VIDEO
 208 #define CONFIG_CMD_BMP
 209 #define CONFIG_CFB_CONSOLE
 210 #define CONFIG_VIDEO_SW_CURSOR
 211 #define CONFIG_VGA_AS_SINGLE_DEVICE
 212 #define CONFIG_VIDEO_LOGO
 213 #define CONFIG_VIDEO_BMP_LOGO
 214 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 215 /*
 216  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 217  * disable empty flash sector detection, which is I/O-intensive.
 218  */
 219 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 220 #endif
 221
 222 #ifndef CONFIG_DIU
 223 #define CONFIG_ATI
 224 #endif
 225
 226 #ifdef CONFIG_ATI
 227 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 228 #define CONFIG_VIDEO
 229 #define CONFIG_BIOSEMU
 230 #define CONFIG_VIDEO_SW_CURSOR
 231 #define CONFIG_ATI_RADEON_FB
 232 #define CONFIG_VIDEO_LOGO
 233 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 234 #define CONFIG_CFB_CONSOLE
 235 #define CONFIG_VGA_AS_SINGLE_DEVICE
 236 #endif
 237
 238 /*
 239  * Pass open firmware flat tree
 240  */
 241 #define CONFIG_OF_LIBFDT
 242 #define CONFIG_OF_BOARD_SETUP
 243 #define CONFIG_OF_STDOUT_VIA_ALIAS
 244
 245 /* new uImage format support */
 246 #define CONFIG_FIT
 247 #define CONFIG_FIT_VERBOSE
 248
 249 /* I2C */
 250 #define CONFIG_FSL_I2C
 251 #define CONFIG_HARD_I2C
 252 #define CONFIG_I2C_MULTI_BUS
 253 #define CONFIG_SYS_I2C_SPEED            400000
 254 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 255 #define CONFIG_SYS_I2C_SLAVE            0x7F
 256 #define CONFIG_SYS_I2C_NOPROBES         {{0, 0x29}}
 257 #define CONFIG_SYS_I2C_OFFSET           0x3000
 258 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 259
 260 /*
 261  * I2C2 EEPROM
 262  */
 263 #define CONFIG_ID_EEPROM
 264 #define CONFIG_SYS_I2C_EEPROM_NXID
 265 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 266 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 267 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 268
 269 /*
 270  * General PCI
 271  * Memory space is mapped 1-1, but I/O space must start from 0.
 272  */
 273
 274 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 275 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 276 #ifdef CONFIG_PHYS_64BIT
 277 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 278 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 279 #else
 280 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 281 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 282 #endif
 283 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 284 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 285 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 286 #ifdef CONFIG_PHYS_64BIT
 287 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 288 #else
 289 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 290 #endif
 291 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 292
 293 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 294 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 295 #ifdef CONFIG_PHYS_64BIT
 296 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 297 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 298 #else
 299 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 300 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 301 #endif
 302 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 303 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 304 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 305 #ifdef CONFIG_PHYS_64BIT
 306 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 307 #else
 308 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 309 #endif
 310 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 311
 312 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 313 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 314 #ifdef CONFIG_PHYS_64BIT
 315 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 316 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 317 #else
 318 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 319 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 320 #endif
 321 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 322 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 323 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 324 #ifdef CONFIG_PHYS_64BIT
 325 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 326 #else
 327 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 328 #endif
 329 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 330
 331 #ifdef CONFIG_PCI
 332 #define CONFIG_NET_MULTI
 333 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 334 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 335 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 336 #endif
 337
 338 /* SATA */
 339 #define CONFIG_LIBATA
 340 #define CONFIG_FSL_SATA
 341 #define CONFIG_FSL_SATA_V2
 342
 343 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 344 #define CONFIG_SATA1
 345 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 346 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 347 #define CONFIG_SATA2
 348 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 349 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 350
 351 #ifdef CONFIG_FSL_SATA
 352 #define CONFIG_LBA48
 353 #define CONFIG_CMD_SATA
 354 #define CONFIG_DOS_PARTITION
 355 #define CONFIG_CMD_EXT2
 356 #endif
 357
 358 #define CONFIG_MMC
 359 #ifdef CONFIG_MMC
 360 #define CONFIG_CMD_MMC
 361 #define CONFIG_FSL_ESDHC
 362 #define CONFIG_GENERIC_MMC
 363 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 364 #endif
 365
 366 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 367 #define CONFIG_CMD_EXT2
 368 #define CONFIG_CMD_FAT
 369 #define CONFIG_DOS_PARTITION
 370 #endif
 371
 372 #define CONFIG_TSEC_ENET
 373 #ifdef CONFIG_TSEC_ENET
 374
 375 #define CONFIG_TSECV2
 376 #define CONFIG_NET_MULTI
 377
 378 #define CONFIG_MII                      /* MII PHY management */
 379 #define CONFIG_TSEC1            1
 380 #define CONFIG_TSEC1_NAME       "eTSEC1"
 381 #define CONFIG_TSEC2            1
 382 #define CONFIG_TSEC2_NAME       "eTSEC2"
 383
 384 #define TSEC1_PHY_ADDR          1
 385 #define TSEC2_PHY_ADDR          2
 386
 387 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 388 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 389
 390 #define TSEC1_PHYIDX            0
 391 #define TSEC2_PHYIDX            0
 392
 393 #define CONFIG_ETHPRIME         "eTSEC1"
 394
 395 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 396 #endif
 397
 398 /*
 399  * Environment
 400  */
 401 #define CONFIG_ENV_IS_IN_FLASH
 402 #define CONFIG_ENV_OVERWRITE
 403 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 404 #define CONFIG_ENV_SIZE         0x2000
 405 #define CONFIG_ENV_SECT_SIZE    0x20000
 406
 407 #define CONFIG_LOADS_ECHO
 408 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 409
 410 /*
 411  * Command line configuration.
 412  */
 413 #include <config_cmd_default.h>
 414
 415 #define CONFIG_CMD_ELF
 416 #define CONFIG_CMD_ERRATA
 417 #define CONFIG_CMD_IRQ
 418 #define CONFIG_CMD_I2C
 419 #define CONFIG_CMD_MII
 420 #define CONFIG_CMD_PING
 421 #define CONFIG_CMD_SETEXPR
 422 #define CONFIG_CMD_REGINFO
 423
 424 #ifdef CONFIG_PCI
 425 #define CONFIG_CMD_PCI
 426 #define CONFIG_CMD_NET
 427 #endif
 428
 429 /*
 430  * USB
 431  */
 432 #define CONFIG_USB_EHCI
 433
 434 #ifdef CONFIG_USB_EHCI
 435 #define CONFIG_CMD_USB
 436 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 437 #define CONFIG_USB_EHCI_FSL
 438 #define CONFIG_USB_STORAGE
 439 #define CONFIG_CMD_FAT
 440 #endif
 441
 442 /*
 443  * Miscellaneous configurable options
 444  */
 445 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 446 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 447 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 448 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 449 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 450 #ifdef CONFIG_CMD_KGDB
 451 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 452 #else
 453 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 454 #endif
 455 /* Print Buffer Size */
 456 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 457 #define CONFIG_SYS_MAXARGS      16
 458 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 459 #define CONFIG_SYS_HZ           1000
 460
 461 /*
 462  * For booting Linux, the board info and command line data
 463  * have to be in the first 16 MB of memory, since this is
 464  * the maximum mapped by the Linux kernel during initialization.
 465  */
 466 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 467 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 468
 469 #ifdef CONFIG_CMD_KGDB
 470 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 471 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 472 #endif
 473
 474 /*
 475  * Environment Configuration
 476  */
 477
 478 #define CONFIG_HOSTNAME         p1022ds
 479 #define CONFIG_ROOTPATH         /opt/nfsroot
 480 #define CONFIG_BOOTFILE         uImage
 481 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 482
 483 #define CONFIG_LOADADDR         1000000
 484
 485 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 486 #define CONFIG_BOOTARGS
 487
 488 #define CONFIG_BAUDRATE 115200
 489
 490 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 491         "perf_mode=stable\0"                                            \
 492         "memctl_intlv_ctl=2\0"                                          \
 493         "netdev=eth0\0"                                                 \
 494         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
 495         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 496                 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
 497                 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
 498                 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
 499                 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
 500                 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
 501         "consoledev=ttyS0\0"                                            \
 502         "ramdiskaddr=2000000\0"                                         \
 503         "ramdiskfile=uramdisk\0"                                        \
 504         "fdtaddr=c00000\0"                                              \
 505         "fdtfile=p1022ds.dtb\0"                                         \
 506         "bdev=sda3\0"                                                   \
 507         "diuregs=md e002c000 1d\0"                                      \
 508         "dium=mw e002c01c\0"                                            \
 509         "diuerr=md e002c014 1\0"                                        \
 510         "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 tty0\0" \
 511         "hwconfig=esdhc;audclk:12\0"                                    \
 512         "monitor=0-DVI\0"
 513
 514 #define CONFIG_HDBOOT                                   \
 515         "setenv bootargs root=/dev/$bdev rw "           \
 516         "console=$consoledev,$baudrate $othbootargs;"   \
 517         "tftp $loadaddr $bootfile;"                     \
 518         "tftp $fdtaddr $fdtfile;"                       \
 519         "bootm $loadaddr - $fdtaddr"
 520
 521 #define CONFIG_NFSBOOTCOMMAND                                           \
 522         "setenv bootargs root=/dev/nfs rw "                             \
 523         "nfsroot=$serverip:$rootpath "                                  \
 524         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 525         "console=$consoledev,$baudrate $othbootargs;"                   \
 526         "tftp $loadaddr $bootfile;"                                     \
 527         "tftp $fdtaddr $fdtfile;"                                       \
 528         "bootm $loadaddr - $fdtaddr"
 529
 530 #define CONFIG_RAMBOOTCOMMAND                                           \
 531         "setenv bootargs root=/dev/ram rw "                             \
 532         "console=$consoledev,$baudrate $othbootargs;"                   \
 533         "tftp $ramdiskaddr $ramdiskfile;"                               \
 534         "tftp $loadaddr $bootfile;"                                     \
 535         "tftp $fdtaddr $fdtfile;"                                       \
 536         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 537
 538 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 539
 540 #endif