sunxi: Add support for using MII phy-s with the GMAC nic
[oweals/u-boot.git] / include / configs / C29XPCIE.h
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /*
8  * C29XPCIE board configuration file
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #define CONFIG_PHYS_64BIT
15
16 #ifdef CONFIG_C29XPCIE
17 #define CONFIG_PPC_C29X
18 #endif
19
20 #ifdef CONFIG_SPIFLASH
21 #define CONFIG_RAMBOOT_SPIFLASH
22 #define CONFIG_SYS_TEXT_BASE            0x11000000
23 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
24 #endif
25
26 #ifdef CONFIG_NAND
27 #define CONFIG_SPL
28 #define CONFIG_TPL
29 #ifdef CONFIG_TPL_BUILD
30 #define CONFIG_SPL_NAND_BOOT
31 #define CONFIG_SPL_FLUSH_IMAGE
32 #define CONFIG_SPL_ENV_SUPPORT
33 #define CONFIG_SPL_NAND_INIT
34 #define CONFIG_SPL_SERIAL_SUPPORT
35 #define CONFIG_SPL_LIBGENERIC_SUPPORT
36 #define CONFIG_SPL_LIBCOMMON_SUPPORT
37 #define CONFIG_SPL_I2C_SUPPORT
38 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
39 #define CONFIG_SPL_NAND_SUPPORT
40 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
41 #define CONFIG_SPL_COMMON_INIT_DDR
42 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
43 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
44 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
46 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
47 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
48 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
49 #elif defined(CONFIG_SPL_BUILD)
50 #define CONFIG_SPL_INIT_MINIMAL
51 #define CONFIG_SPL_SERIAL_SUPPORT
52 #define CONFIG_SPL_NAND_SUPPORT
53 #define CONFIG_SPL_NAND_MINIMAL
54 #define CONFIG_SPL_FLUSH_IMAGE
55 #define CONFIG_SPL_TEXT_BASE            0xff800000
56 #define CONFIG_SPL_MAX_SIZE             8192
57 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
58 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
59 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
60 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
61 #endif
62 #define CONFIG_SPL_PAD_TO               0x20000
63 #define CONFIG_TPL_PAD_TO               0x20000
64 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
65 #define CONFIG_SYS_TEXT_BASE            0x11001000
66 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
67 #endif
68
69 #ifndef CONFIG_SYS_TEXT_BASE
70 #define CONFIG_SYS_TEXT_BASE            0xeff40000
71 #endif
72
73 #ifndef CONFIG_RESET_VECTOR_ADDRESS
74 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
75 #endif
76
77 #ifdef CONFIG_SPL_BUILD
78 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
79 #else
80 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
81 #endif
82
83 #ifdef CONFIG_SPL_BUILD
84 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
85 #endif
86
87 /* High Level Configuration Options */
88 #define CONFIG_BOOKE                    /* BOOKE */
89 #define CONFIG_E500                     /* BOOKE e500 family */
90 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
91 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
92
93 #define CONFIG_PCI                      /* Enable PCI/PCIE */
94 #ifdef CONFIG_PCI
95 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
96 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
97 #define CONFIG_PCI_INDIRECT_BRIDGE
98 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
99 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
100
101 #define CONFIG_CMD_NET
102 #define CONFIG_CMD_PCI
103
104 #define CONFIG_E1000
105
106 /*
107  * PCI Windows
108  * Memory space is mapped 1-1, but I/O space must start from 0.
109  */
110 /* controller 1, Slot 1, tgtid 1, Base address a000 */
111 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
112 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
113 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
114 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
115 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
116 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
117 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
118 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
119 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
120
121 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
122
123 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
124 #define CONFIG_DOS_PARTITION
125 #endif
126
127 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
128 #define CONFIG_TSEC_ENET
129 #define CONFIG_ENV_OVERWRITE
130
131 #define CONFIG_DDR_CLK_FREQ     100000000
132 #define CONFIG_SYS_CLK_FREQ     66666666
133
134 #define CONFIG_HWCONFIG
135
136 /*
137  * These can be toggled for performance analysis, otherwise use default.
138  */
139 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
140 #define CONFIG_BTB                      /* toggle branch predition */
141
142 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
143
144 #define CONFIG_ENABLE_36BIT_PHYS
145
146 #define CONFIG_ADDR_MAP                 1
147 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
148
149 #define CONFIG_SYS_MEMTEST_START        0x00200000
150 #define CONFIG_SYS_MEMTEST_END          0x00400000
151 #define CONFIG_PANIC_HANG
152
153 /* DDR Setup */
154 #define CONFIG_SYS_FSL_DDR3
155 #define CONFIG_DDR_SPD
156 #define CONFIG_SYS_SPD_BUS_NUM          0
157 #define SPD_EEPROM_ADDRESS              0x50
158 #define CONFIG_SYS_DDR_RAW_TIMING
159
160 /* DDR ECC Setup*/
161 #define CONFIG_DDR_ECC
162 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
163 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
164
165 #define CONFIG_SYS_SDRAM_SIZE           512
166 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
167 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
168
169 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
170 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
171
172 #define CONFIG_SYS_CCSRBAR              0xffe00000
173 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
174
175 /* Platform SRAM setting  */
176 #define CONFIG_SYS_PLATFORM_SRAM_BASE   0xffb00000
177 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
178                         (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
179 #define CONFIG_SYS_PLATFORM_SRAM_SIZE   (512 << 10)
180
181 #ifdef CONFIG_SPL_BUILD
182 #define CONFIG_SYS_NO_FLASH
183 #endif
184
185 /*
186  * IFC Definitions
187  */
188 /* NOR Flash on IFC */
189 #define CONFIG_SYS_FLASH_BASE           0xec000000
190 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
191
192 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
193
194 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
195 #define CONFIG_SYS_MAX_FLASH_BANKS      1
196
197 #define CONFIG_SYS_FLASH_QUIET_TEST
198 #define CONFIG_FLASH_SHOW_PROGRESS      45
199 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* in ms */
200 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* in ms */
201
202 /* 16Bit NOR Flash - S29GL512S10TFI01 */
203 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
204                                 CSPR_PORT_SIZE_16 | \
205                                 CSPR_MSEL_NOR | \
206                                 CSPR_V)
207 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(64*1024*1024)
208 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
209
210 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
211                                 FTIM0_NOR_TEADC(0x5) | \
212                                 FTIM0_NOR_TEAHC(0x5))
213 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
214                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
215                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
216 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
217                                 FTIM2_NOR_TCH(0x4) | \
218                                 FTIM2_NOR_TWPH(0x0E) | \
219                                 FTIM2_NOR_TWP(0x1c))
220 #define CONFIG_SYS_NOR_FTIM3    0x0
221
222 /* CFI for NOR Flash */
223 #define CONFIG_FLASH_CFI_DRIVER
224 #define CONFIG_SYS_FLASH_CFI
225 #define CONFIG_SYS_FLASH_EMPTY_INFO
226 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
227
228 /* NAND Flash on IFC */
229 #define CONFIG_NAND_FSL_IFC
230 #define CONFIG_SYS_NAND_BASE            0xff800000
231 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
232
233 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
234
235 #define CONFIG_SYS_MAX_NAND_DEVICE      1
236 #define CONFIG_MTD_NAND_VERIFY_WRITE
237 #define CONFIG_CMD_NAND
238 #define CONFIG_SYS_NAND_BLOCK_SIZE      (1024 * 1024)
239
240 /* 8Bit NAND Flash - K9F1G08U0B */
241 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
242                                 | CSPR_PORT_SIZE_8 \
243                                 | CSPR_MSEL_NAND \
244                                 | CSPR_V)
245 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
246 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280      /* 640b */
247 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
248                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
249                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
250                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
251                                 | CSOR_NAND_PGS_8K      /* Page Size = 8K */ \
252                                 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
253                                 | CSOR_NAND_PB(128))    /*128 Pages Per Block*/
254 #define CONFIG_SYS_NAND_FTIM0   (FTIM0_NAND_TCCST(0x01) | \
255                                 FTIM0_NAND_TWP(0x0c)   | \
256                                 FTIM0_NAND_TWCHT(0x08) | \
257                                 FTIM0_NAND_TWH(0x06))
258 #define CONFIG_SYS_NAND_FTIM1   (FTIM1_NAND_TADLE(0x28) | \
259                                 FTIM1_NAND_TWBE(0x1d)  | \
260                                 FTIM1_NAND_TRR(0x08)   | \
261                                 FTIM1_NAND_TRP(0x0c))
262 #define CONFIG_SYS_NAND_FTIM2   (FTIM2_NAND_TRAD(0x0c) | \
263                                 FTIM2_NAND_TREH(0x0a) | \
264                                 FTIM2_NAND_TWHRE(0x18))
265 #define CONFIG_SYS_NAND_FTIM3   (FTIM3_NAND_TWW(0x04))
266
267 #define CONFIG_SYS_NAND_DDR_LAW         11
268
269 /* Set up IFC registers for boot location NOR/NAND */
270 #ifdef CONFIG_NAND
271 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
272 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
273 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
274 #define CONFIG_SYS_CSOR0_EXT            CONFIG_SYS_NAND_OOBSIZE
275 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
276 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
277 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
278 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
279 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
280 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
281 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
282 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
283 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
284 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
285 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
286 #else
287 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
288 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
289 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
290 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
291 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
292 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
293 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
294 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
295 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
296 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
297 #define CONFIG_SYS_CSOR1_EXT            CONFIG_SYS_NAND_OOBSIZE
298 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
299 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
300 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
301 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
302 #endif
303
304 /* CPLD on IFC, selected by CS2 */
305 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
306 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull \
307                                         | CONFIG_SYS_CPLD_BASE)
308
309 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
310                                 | CSPR_PORT_SIZE_8 \
311                                 | CSPR_MSEL_GPCM \
312                                 | CSPR_V)
313 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
314 #define CONFIG_SYS_CSOR2        0x0
315 /* CPLD Timing parameters for IFC CS2 */
316 #define CONFIG_SYS_CS2_FTIM0    (FTIM0_GPCM_TACSE(0x0e) | \
317                                 FTIM0_GPCM_TEADC(0x0e) | \
318                                 FTIM0_GPCM_TEAHC(0x0e))
319 #define CONFIG_SYS_CS2_FTIM1    (FTIM1_GPCM_TACO(0x0e) | \
320                                 FTIM1_GPCM_TRAD(0x1f))
321 #define CONFIG_SYS_CS2_FTIM2    (FTIM2_GPCM_TCS(0x0e) | \
322                                 FTIM2_GPCM_TCH(0x0) | \
323                                 FTIM2_GPCM_TWP(0x1f))
324 #define CONFIG_SYS_CS2_FTIM3    0x0
325
326 #if defined(CONFIG_RAMBOOT_SPIFLASH)
327 #define CONFIG_SYS_RAMBOOT
328 #define CONFIG_SYS_EXTRA_ENV_RELOC
329 #endif
330
331 #define CONFIG_BOARD_EARLY_INIT_R
332
333 #define CONFIG_SYS_INIT_RAM_LOCK
334 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000
335 #define CONFIG_SYS_INIT_RAM_END         0x00004000
336
337 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
338                                                 - GENERATED_GBL_DATA_SIZE)
339 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
340
341 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
342 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
343
344 /*
345  * Config the L2 Cache as L2 SRAM
346  */
347 #if defined(CONFIG_SPL_BUILD)
348 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
349 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
350 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
351 #define CONFIG_SYS_L2_SIZE              (256 << 10)
352 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
353 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
354 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
355 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
356 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
357 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (96 << 10)
358 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
359 #elif defined(CONFIG_NAND)
360 #ifdef CONFIG_TPL_BUILD
361 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
362 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
363 #define CONFIG_SYS_L2_SIZE              (256 << 10)
364 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
365 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
366 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
367 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
368 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
369 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
370 #else
371 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
372 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
373 #define CONFIG_SYS_L2_SIZE              (256 << 10)
374 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
375 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
376 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
377 #endif
378 #endif
379 #endif
380
381 /* Serial Port */
382 #define CONFIG_CONS_INDEX       1
383 #define CONFIG_SYS_NS16550
384 #define CONFIG_SYS_NS16550_SERIAL
385 #define CONFIG_SYS_NS16550_REG_SIZE     1
386 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
387
388 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
389 #define CONFIG_NS16550_MIN_FUNCTIONS
390 #endif
391
392 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
393 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
394
395 #define CONFIG_SYS_BAUDRATE_TABLE       \
396         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
397
398 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
399 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
400
401 /* Use the HUSH parser */
402 #define CONFIG_SYS_HUSH_PARSER
403
404 /*
405  * Pass open firmware flat tree
406  */
407 #define CONFIG_OF_LIBFDT
408 #define CONFIG_OF_BOARD_SETUP
409 #define CONFIG_OF_STDOUT_VIA_ALIAS
410
411 /* new uImage format support */
412 #define CONFIG_FIT
413 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
414
415 #define CONFIG_SYS_I2C
416 #define CONFIG_SYS_I2C_FSL
417 #define CONFIG_SYS_FSL_I2C_SPEED        400000
418 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
419 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
420 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
421 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
422 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
423
424 /* I2C EEPROM */
425 /* enable read and write access to EEPROM */
426 #define CONFIG_CMD_EEPROM
427 #define CONFIG_SYS_I2C_MULTI_EEPROMS
428 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
429 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
430 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
431
432 #define CONFIG_CMD_I2C
433
434 /* eSPI - Enhanced SPI */
435 #define CONFIG_FSL_ESPI
436 #define CONFIG_SPI_FLASH
437 #define CONFIG_SPI_FLASH_SPANSION
438 #define CONFIG_SPI_FLASH_EON
439 #define CONFIG_CMD_SF
440 #define CONFIG_SF_DEFAULT_SPEED         10000000
441 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
442
443 #ifdef CONFIG_TSEC_ENET
444 #define CONFIG_NET_MULTI
445 #define CONFIG_MII                      /* MII PHY management */
446 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
447 #define CONFIG_TSEC1            1
448 #define CONFIG_TSEC1_NAME       "eTSEC1"
449 #define CONFIG_TSEC2            1
450 #define CONFIG_TSEC2_NAME       "eTSEC2"
451
452 /* Default mode is RGMII mode */
453 #define TSEC1_PHY_ADDR          0
454 #define TSEC2_PHY_ADDR          2
455
456 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
457 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
458
459 #define CONFIG_ETHPRIME         "eTSEC1"
460
461 #define CONFIG_PHY_GIGE
462 #endif  /* CONFIG_TSEC_ENET */
463
464 /*
465  * Environment
466  */
467 #if defined(CONFIG_SYS_RAMBOOT)
468 #if defined(CONFIG_RAMBOOT_SPIFLASH)
469 #define CONFIG_ENV_IS_IN_SPI_FLASH
470 #define CONFIG_ENV_SPI_BUS      0
471 #define CONFIG_ENV_SPI_CS       0
472 #define CONFIG_ENV_SPI_MAX_HZ   10000000
473 #define CONFIG_ENV_SPI_MODE     0
474 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
475 #define CONFIG_ENV_SECT_SIZE    0x10000
476 #define CONFIG_ENV_SIZE         0x2000
477 #endif
478 #elif defined(CONFIG_NAND)
479 #define CONFIG_ENV_IS_IN_NAND
480 #ifdef CONFIG_TPL_BUILD
481 #define CONFIG_ENV_SIZE         0x2000
482 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
483 #else
484 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
485 #define CONFIG_ENV_RANGE        CONFIG_ENV_SIZE
486 #endif
487 #define CONFIG_ENV_OFFSET       CONFIG_SYS_NAND_BLOCK_SIZE
488 #else
489 #define CONFIG_ENV_IS_IN_FLASH
490 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
491 #define CONFIG_ENV_SIZE         0x2000
492 #define CONFIG_ENV_SECT_SIZE    0x20000
493 #endif
494
495 #define CONFIG_LOADS_ECHO
496 #define CONFIG_SYS_LOADS_BAUD_CHANGE
497
498 /*
499  * Command line configuration.
500  */
501 #include <config_cmd_default.h>
502
503 #define CONFIG_CMD_ERRATA
504 #define CONFIG_CMD_ELF
505 #define CONFIG_CMD_IRQ
506 #define CONFIG_CMD_MII
507 #define CONFIG_CMD_PING
508 #define CONFIG_CMD_SETEXPR
509 #define CONFIG_CMD_REGINFO
510
511 /*
512  * Miscellaneous configurable options
513  */
514 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
515 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
516 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
517 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
518
519 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
520 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
521                                                 /* Print Buffer Size */
522 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
523 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
524
525 /*
526  * For booting Linux, the board info and command line data
527  * have to be in the first 64 MB of memory, since this is
528  * the maximum mapped by the Linux kernel during initialization.
529  */
530 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
531 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
532
533 /*
534  * Environment Configuration
535  */
536
537 #ifdef CONFIG_TSEC_ENET
538 #define CONFIG_HAS_ETH0
539 #define CONFIG_HAS_ETH1
540 #endif
541
542 #define CONFIG_ROOTPATH         "/opt/nfsroot"
543 #define CONFIG_BOOTFILE         "uImage"
544 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
545
546 /* default location for tftp and bootm */
547 #define CONFIG_LOADADDR         1000000
548
549 #define CONFIG_BOOTDELAY        -1      /* -1 disables auto-boot */
550
551 #define CONFIG_BAUDRATE         115200
552
553 #define CONFIG_DEF_HWCONFIG     fsl_ddr:ecc=on
554
555 #define CONFIG_EXTRA_ENV_SETTINGS                               \
556         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
557         "netdev=eth0\0"                                         \
558         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
559         "loadaddr=1000000\0"                            \
560         "consoledev=ttyS0\0"                            \
561         "ramdiskaddr=2000000\0"                         \
562         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
563         "fdtaddr=c00000\0"                              \
564         "fdtfile=name/of/device-tree.dtb\0"                     \
565         "othbootargs=ramdisk_size=600000\0"             \
566
567 #define CONFIG_RAMBOOTCOMMAND                   \
568         "setenv bootargs root=/dev/ram rw "     \
569         "console=$consoledev,$baudrate $othbootargs; "  \
570         "tftp $ramdiskaddr $ramdiskfile;"       \
571         "tftp $loadaddr $bootfile;"             \
572         "tftp $fdtaddr $fdtfile;"               \
573         "bootm $loadaddr $ramdiskaddr $fdtaddr"
574
575 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
576
577 #endif  /* __CONFIG_H */