include/configs/B4860QDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /*
  10  * B4860 QDS board configuration file
  11  */
  12 #ifdef CONFIG_RAMBOOT_PBL
  13 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  14 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  15 #ifndef CONFIG_NAND
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #else
  19 #define CONFIG_SPL_FLUSH_IMAGE
  20 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  21 #define CONFIG_SPL_PAD_TO               0x40000
  22 #define CONFIG_SPL_MAX_SIZE             0x28000
  23 #define RESET_VECTOR_OFFSET             0x27FFC
  24 #define BOOT_PAGE_OFFSET                0x27000
  25 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  26 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  27 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  28 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  29 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  30 #define CONFIG_SPL_NAND_BOOT
  31 #ifdef CONFIG_SPL_BUILD
  32 #define CONFIG_SPL_SKIP_RELOCATE
  33 #define CONFIG_SPL_COMMON_INIT_DDR
  34 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  35 #endif
  36 #endif
  37 #endif
  38
  39 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  40 /* Set 1M boot space */
  41 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  42 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  43                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  44 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  45 #endif
  46
  47 /* High Level Configuration Options */
  48 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  55 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  56 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  57 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  58 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  59
  60 #ifndef CONFIG_ARCH_B4420
  61 #define CONFIG_SYS_SRIO
  62 #define CONFIG_SRIO1                    /* SRIO port 1 */
  63 #define CONFIG_SRIO2                    /* SRIO port 2 */
  64 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  65 #endif
  66
  67 /* I2C bus multiplexer */
  68 #define I2C_MUX_PCA_ADDR                0x77
  69
  70 /* VSC Crossbar switches */
  71 #define CONFIG_VSC_CROSSBAR
  72 #define I2C_CH_DEFAULT                  0x8
  73 #define I2C_CH_VSC3316                  0xc
  74 #define I2C_CH_VSC3308                  0xd
  75
  76 #define VSC3316_TX_ADDRESS              0x70
  77 #define VSC3316_RX_ADDRESS              0x71
  78 #define VSC3308_TX_ADDRESS              0x02
  79 #define VSC3308_RX_ADDRESS              0x03
  80
  81 /* IDT clock synthesizers */
  82 #define CONFIG_IDT8T49N222A
  83 #define I2C_CH_IDT                     0x9
  84
  85 #define IDT_SERDES1_ADDRESS            0x6E
  86 #define IDT_SERDES2_ADDRESS            0x6C
  87
  88 /* Voltage monitor on channel 2*/
  89 #define I2C_MUX_CH_VOL_MONITOR          0xa
  90 #define I2C_VOL_MONITOR_ADDR            0x40
  91 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
  92 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
  93 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
  94
  95 #define CONFIG_ZM7300
  96 #define I2C_MUX_CH_DPM                  0xa
  97 #define I2C_DPM_ADDR                    0x28
  98
  99 #define CONFIG_ENV_OVERWRITE
 100
 101 #ifndef CONFIG_MTD_NOR_FLASH
 102 #else
 103 #define CONFIG_FLASH_CFI_DRIVER
 104 #define CONFIG_SYS_FLASH_CFI
 105 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 106 #endif
 107
 108 #if defined(CONFIG_SPIFLASH)
 109 #define CONFIG_SYS_EXTRA_ENV_RELOC
 110 #define CONFIG_ENV_SPI_BUS              0
 111 #define CONFIG_ENV_SPI_CS               0
 112 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 113 #define CONFIG_ENV_SPI_MODE             0
 114 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 115 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 116 #define CONFIG_ENV_SECT_SIZE            0x10000
 117 #elif defined(CONFIG_SDCARD)
 118 #define CONFIG_SYS_EXTRA_ENV_RELOC
 119 #define CONFIG_SYS_MMC_ENV_DEV          0
 120 #define CONFIG_ENV_SIZE                 0x2000
 121 #define CONFIG_ENV_OFFSET               (512 * 1097)
 122 #elif defined(CONFIG_NAND)
 123 #define CONFIG_SYS_EXTRA_ENV_RELOC
 124 #define CONFIG_ENV_SIZE                 0x2000
 125 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 126 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 127 #define CONFIG_ENV_ADDR         0xffe20000
 128 #define CONFIG_ENV_SIZE         0x2000
 129 #elif defined(CONFIG_ENV_IS_NOWHERE)
 130 #define CONFIG_ENV_SIZE         0x2000
 131 #else
 132 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 133 #define CONFIG_ENV_SIZE         0x2000
 134 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 135 #endif
 136
 137 #ifndef __ASSEMBLY__
 138 unsigned long get_board_sys_clk(void);
 139 unsigned long get_board_ddr_clk(void);
 140 #endif
 141 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 142 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 143
 144 /*
 145  * These can be toggled for performance analysis, otherwise use default.
 146  */
 147 #define CONFIG_SYS_CACHE_STASHING
 148 #define CONFIG_BTB                      /* toggle branch predition */
 149 #define CONFIG_DDR_ECC
 150 #ifdef CONFIG_DDR_ECC
 151 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 152 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 153 #endif
 154
 155 #define CONFIG_ENABLE_36BIT_PHYS
 156
 157 #ifdef CONFIG_PHYS_64BIT
 158 #define CONFIG_ADDR_MAP
 159 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 160 #endif
 161
 162 #if 0
 163 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 164 #endif
 165 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 166 #define CONFIG_SYS_MEMTEST_END          0x00400000
 167
 168 /*
 169  *  Config the L3 Cache as L3 SRAM
 170  */
 171 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 172 #define CONFIG_SYS_L3_SIZE              256 << 10
 173 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 174 #ifdef CONFIG_NAND
 175 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 176 #endif
 177 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 178 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 179 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 180
 181 #ifdef CONFIG_PHYS_64BIT
 182 #define CONFIG_SYS_DCSRBAR              0xf0000000
 183 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 184 #endif
 185
 186 /* EEPROM */
 187 #define CONFIG_ID_EEPROM
 188 #define CONFIG_SYS_I2C_EEPROM_NXID
 189 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 190 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 191 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 192 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 193 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 194
 195 /*
 196  * DDR Setup
 197  */
 198 #define CONFIG_VERY_BIG_RAM
 199 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 200 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 201
 202 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 203 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 204
 205 #define CONFIG_DDR_SPD
 206 #define CONFIG_SYS_DDR_RAW_TIMING
 207 #ifndef CONFIG_SPL_BUILD
 208 #define CONFIG_FSL_DDR_INTERACTIVE
 209 #endif
 210
 211 #define CONFIG_SYS_SPD_BUS_NUM  0
 212 #define SPD_EEPROM_ADDRESS1     0x51
 213 #define SPD_EEPROM_ADDRESS2     0x53
 214
 215 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 216 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 217
 218 /*
 219  * IFC Definitions
 220  */
 221 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 222 #ifdef CONFIG_PHYS_64BIT
 223 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 224 #else
 225 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 226 #endif
 227
 228 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 229 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 230                                 + 0x8000000) | \
 231                                 CSPR_PORT_SIZE_16 | \
 232                                 CSPR_MSEL_NOR | \
 233                                 CSPR_V)
 234 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 235 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 236                                 CSPR_PORT_SIZE_16 | \
 237                                 CSPR_MSEL_NOR | \
 238                                 CSPR_V)
 239 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 240 /* NOR Flash Timing Params */
 241 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 242 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 243                                 FTIM0_NOR_TEADC(0x04) | \
 244                                 FTIM0_NOR_TEAHC(0x20))
 245 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 246                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 247                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 248 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 249                                 FTIM2_NOR_TCH(0x0E) | \
 250                                 FTIM2_NOR_TWPH(0x0E) | \
 251                                 FTIM2_NOR_TWP(0x1c))
 252 #define CONFIG_SYS_NOR_FTIM3    0x0
 253
 254 #define CONFIG_SYS_FLASH_QUIET_TEST
 255 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 256
 257 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 258 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 259 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 260 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 261
 262 #define CONFIG_SYS_FLASH_EMPTY_INFO
 263 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 264                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 265
 266 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 267 #define CONFIG_FSL_QIXIS_V2
 268 #define QIXIS_BASE              0xffdf0000
 269 #ifdef CONFIG_PHYS_64BIT
 270 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 271 #else
 272 #define QIXIS_BASE_PHYS         QIXIS_BASE
 273 #endif
 274 #define QIXIS_LBMAP_SWITCH              0x01
 275 #define QIXIS_LBMAP_MASK                0x0f
 276 #define QIXIS_LBMAP_SHIFT               0
 277 #define QIXIS_LBMAP_DFLTBANK            0x00
 278 #define QIXIS_LBMAP_ALTBANK             0x02
 279 #define QIXIS_RST_CTL_RESET             0x31
 280 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 281 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 282 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 283
 284 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 285 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 286                                 | CSPR_PORT_SIZE_8 \
 287                                 | CSPR_MSEL_GPCM \
 288                                 | CSPR_V)
 289 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 290 #define CONFIG_SYS_CSOR3        0x0
 291 /* QIXIS Timing parameters for IFC CS3 */
 292 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 293                                         FTIM0_GPCM_TEADC(0x0e) | \
 294                                         FTIM0_GPCM_TEAHC(0x0e))
 295 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 296                                         FTIM1_GPCM_TRAD(0x1f))
 297 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 298                                         FTIM2_GPCM_TCH(0x8) | \
 299                                         FTIM2_GPCM_TWP(0x1f))
 300 #define CONFIG_SYS_CS3_FTIM3            0x0
 301
 302 /* NAND Flash on IFC */
 303 #define CONFIG_NAND_FSL_IFC
 304 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 305 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 306 #define CONFIG_SYS_NAND_BASE            0xff800000
 307 #ifdef CONFIG_PHYS_64BIT
 308 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 309 #else
 310 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 311 #endif
 312
 313 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 314 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 315                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 316                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 317                                 | CSPR_V)
 318 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 319
 320 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 321                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 322                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 323                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 324                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 325                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 326                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 327
 328 #define CONFIG_SYS_NAND_ONFI_DETECTION
 329
 330 /* ONFI NAND Flash mode0 Timing Params */
 331 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 332                                         FTIM0_NAND_TWP(0x18)   | \
 333                                         FTIM0_NAND_TWCHT(0x07) | \
 334                                         FTIM0_NAND_TWH(0x0a))
 335 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 336                                         FTIM1_NAND_TWBE(0x39)  | \
 337                                         FTIM1_NAND_TRR(0x0e)   | \
 338                                         FTIM1_NAND_TRP(0x18))
 339 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 340                                         FTIM2_NAND_TREH(0x0a) | \
 341                                         FTIM2_NAND_TWHRE(0x1e))
 342 #define CONFIG_SYS_NAND_FTIM3           0x0
 343
 344 #define CONFIG_SYS_NAND_DDR_LAW         11
 345
 346 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 347 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 348
 349 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 350
 351 #if defined(CONFIG_NAND)
 352 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 353 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 354 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 355 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 356 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 357 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 358 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 359 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 360 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 361 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 362 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 363 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 364 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 365 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 366 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 367 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 368 #else
 369 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 370 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 371 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 372 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 373 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 374 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 375 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 376 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 377 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 378 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 379 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 380 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 381 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 382 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 383 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 384 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 385 #endif
 386 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 387 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 388 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 389 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 390 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 391 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 392 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 393 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 394
 395 #ifdef CONFIG_SPL_BUILD
 396 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 397 #else
 398 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 399 #endif
 400
 401 #if defined(CONFIG_RAMBOOT_PBL)
 402 #define CONFIG_SYS_RAMBOOT
 403 #endif
 404
 405 #define CONFIG_HWCONFIG
 406
 407 /* define to use L1 as initial stack */
 408 #define CONFIG_L1_INIT_RAM
 409 #define CONFIG_SYS_INIT_RAM_LOCK
 410 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 411 #ifdef CONFIG_PHYS_64BIT
 412 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 413 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 414 /* The assembler doesn't like typecast */
 415 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 416         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 417           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 418 #else
 419 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 420 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 421 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 422 #endif
 423 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 424
 425 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 426                                         GENERATED_GBL_DATA_SIZE)
 427 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 428
 429 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 430 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 431
 432 /* Serial Port - controlled on board with jumper J8
 433  * open - index 2
 434  * shorted - index 1
 435  */
 436 #define CONFIG_SYS_NS16550_SERIAL
 437 #define CONFIG_SYS_NS16550_REG_SIZE     1
 438 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 439
 440 #define CONFIG_SYS_BAUDRATE_TABLE       \
 441         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 442
 443 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 444 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 445 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 446 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 447
 448 /* I2C */
 449 #define CONFIG_SYS_I2C
 450 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 451 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 452 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 453 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 454 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 455 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 456 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 457
 458 /*
 459  * RTC configuration
 460  */
 461 #define RTC
 462 #define CONFIG_RTC_DS3231               1
 463 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 464
 465 /*
 466  * RapidIO
 467  */
 468 #ifdef CONFIG_SYS_SRIO
 469 #ifdef CONFIG_SRIO1
 470 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 471 #ifdef CONFIG_PHYS_64BIT
 472 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 473 #else
 474 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 475 #endif
 476 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 477 #endif
 478
 479 #ifdef CONFIG_SRIO2
 480 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 481 #ifdef CONFIG_PHYS_64BIT
 482 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 483 #else
 484 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 485 #endif
 486 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 487 #endif
 488 #endif
 489
 490 /*
 491  * for slave u-boot IMAGE instored in master memory space,
 492  * PHYS must be aligned based on the SIZE
 493  */
 494 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 495 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 496 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 497 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 498 /*
 499  * for slave UCODE and ENV instored in master memory space,
 500  * PHYS must be aligned based on the SIZE
 501  */
 502 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 503 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 504 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 505
 506 /* slave core release by master*/
 507 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 508 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 509
 510 /*
 511  * SRIO_PCIE_BOOT - SLAVE
 512  */
 513 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 514 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 515 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 516                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 517 #endif
 518
 519 /*
 520  * eSPI - Enhanced SPI
 521  */
 522 #define CONFIG_SF_DEFAULT_SPEED         10000000
 523 #define CONFIG_SF_DEFAULT_MODE          0
 524
 525 /*
 526  * MAPLE
 527  */
 528 #ifdef CONFIG_PHYS_64BIT
 529 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 530 #else
 531 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 532 #endif
 533
 534 /*
 535  * General PCI
 536  * Memory space is mapped 1-1, but I/O space must start from 0.
 537  */
 538
 539 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 540 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 541 #ifdef CONFIG_PHYS_64BIT
 542 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 543 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 544 #else
 545 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 546 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 547 #endif
 548 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 549 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 550 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 551 #ifdef CONFIG_PHYS_64BIT
 552 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 553 #else
 554 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 555 #endif
 556 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 557
 558 /* Qman/Bman */
 559 #ifndef CONFIG_NOBQFMAN
 560 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 561 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 562 #ifdef CONFIG_PHYS_64BIT
 563 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 564 #else
 565 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 566 #endif
 567 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 568 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 569 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 570 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 571 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 572 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 573                                         CONFIG_SYS_BMAN_CENA_SIZE)
 574 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 575 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 576 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 577 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 578 #ifdef CONFIG_PHYS_64BIT
 579 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 580 #else
 581 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 582 #endif
 583 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 584 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 585 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 586 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 587 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 588 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 589                                         CONFIG_SYS_QMAN_CENA_SIZE)
 590 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 591 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 592
 593 #define CONFIG_SYS_DPAA_FMAN
 594
 595 #define CONFIG_SYS_DPAA_RMAN
 596
 597 /* Default address of microcode for the Linux Fman driver */
 598 #if defined(CONFIG_SPIFLASH)
 599 /*
 600  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 601  * env, so we got 0x110000.
 602  */
 603 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 604 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 605 #elif defined(CONFIG_SDCARD)
 606 /*
 607  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 608  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 609  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 610  */
 611 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 612 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 613 #elif defined(CONFIG_NAND)
 614 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 615 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 616 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 617 /*
 618  * Slave has no ucode locally, it can fetch this from remote. When implementing
 619  * in two corenet boards, slave's ucode could be stored in master's memory
 620  * space, the address can be mapped from slave TLB->slave LAW->
 621  * slave SRIO or PCIE outbound window->master inbound window->
 622  * master LAW->the ucode address in master's memory space.
 623  */
 624 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 625 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 626 #else
 627 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 628 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 629 #endif
 630 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 631 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 632 #endif /* CONFIG_NOBQFMAN */
 633
 634 #ifdef CONFIG_SYS_DPAA_FMAN
 635 #define CONFIG_FMAN_ENET
 636 #define CONFIG_PHYLIB_10G
 637 #define CONFIG_PHY_VITESSE
 638 #define CONFIG_PHY_TERANETICS
 639 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 640 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 641 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 642 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 643 #endif
 644
 645 #ifdef CONFIG_PCI
 646 #define CONFIG_PCI_INDIRECT_BRIDGE
 647
 648 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 649 #endif  /* CONFIG_PCI */
 650
 651 #ifdef CONFIG_FMAN_ENET
 652 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 653 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 654
 655 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 656 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 657 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 658
 659 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 660 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 661 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 662 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 663
 664 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 665 #endif
 666
 667 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 668
 669 /*
 670  * Environment
 671  */
 672 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 673 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 674
 675 /*
 676 * USB
 677 */
 678 #define CONFIG_HAS_FSL_DR_USB
 679
 680 #ifdef CONFIG_HAS_FSL_DR_USB
 681 #ifdef CONFIG_USB_EHCI_HCD
 682 #define CONFIG_USB_EHCI_FSL
 683 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 684 #endif
 685 #endif
 686
 687 /*
 688  * Miscellaneous configurable options
 689  */
 690 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 691
 692 /*
 693  * For booting Linux, the board info and command line data
 694  * have to be in the first 64 MB of memory, since this is
 695  * the maximum mapped by the Linux kernel during initialization.
 696  */
 697 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 698 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 699
 700 #ifdef CONFIG_CMD_KGDB
 701 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 702 #endif
 703
 704 /*
 705  * Environment Configuration
 706  */
 707 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 708 #define CONFIG_BOOTFILE         "uImage"
 709 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 710
 711 /* default location for tftp and bootm */
 712 #define CONFIG_LOADADDR         1000000
 713
 714 #define __USB_PHY_TYPE  ulpi
 715
 716 #ifdef CONFIG_ARCH_B4860
 717 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 718                         "bank_intlv=cs0_cs1;"   \
 719                         "en_cpc:cpc2;"
 720 #else
 721 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 722 #endif
 723
 724 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 725         HWCONFIG                                                \
 726         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 727         "netdev=eth0\0"                                         \
 728         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 729         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 730         "tftpflash=tftpboot $loadaddr $uboot && "               \
 731         "protect off $ubootaddr +$filesize && "                 \
 732         "erase $ubootaddr +$filesize && "                       \
 733         "cp.b $loadaddr $ubootaddr $filesize && "               \
 734         "protect on $ubootaddr +$filesize && "                  \
 735         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 736         "consoledev=ttyS0\0"                                    \
 737         "ramdiskaddr=2000000\0"                                 \
 738         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 739         "fdtaddr=1e00000\0"                                     \
 740         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 741         "bdev=sda3\0"
 742
 743 /* For emulation this causes u-boot to jump to the start of the proof point
 744    app code automatically */
 745 #define CONFIG_PROOF_POINTS                     \
 746  "setenv bootargs root=/dev/$bdev rw "          \
 747  "console=$consoledev,$baudrate $othbootargs;"  \
 748  "cpu 1 release 0x29000000 - - -;"              \
 749  "cpu 2 release 0x29000000 - - -;"              \
 750  "cpu 3 release 0x29000000 - - -;"              \
 751  "cpu 4 release 0x29000000 - - -;"              \
 752  "cpu 5 release 0x29000000 - - -;"              \
 753  "cpu 6 release 0x29000000 - - -;"              \
 754  "cpu 7 release 0x29000000 - - -;"              \
 755  "go 0x29000000"
 756
 757 #define CONFIG_HVBOOT   \
 758  "setenv bootargs config-addr=0x60000000; "     \
 759  "bootm 0x01000000 - 0x00f00000"
 760
 761 #define CONFIG_ALU                              \
 762  "setenv bootargs root=/dev/$bdev rw "          \
 763  "console=$consoledev,$baudrate $othbootargs;"  \
 764  "cpu 1 release 0x01000000 - - -;"              \
 765  "cpu 2 release 0x01000000 - - -;"              \
 766  "cpu 3 release 0x01000000 - - -;"              \
 767  "cpu 4 release 0x01000000 - - -;"              \
 768  "cpu 5 release 0x01000000 - - -;"              \
 769  "cpu 6 release 0x01000000 - - -;"              \
 770  "cpu 7 release 0x01000000 - - -;"              \
 771  "go 0x01000000"
 772
 773 #define CONFIG_LINUX                            \
 774  "setenv bootargs root=/dev/ram rw "            \
 775  "console=$consoledev,$baudrate $othbootargs;"  \
 776  "setenv ramdiskaddr 0x02000000;"               \
 777  "setenv fdtaddr 0x01e00000;"                   \
 778  "setenv loadaddr 0x1000000;"                   \
 779  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 780
 781 #define CONFIG_HDBOOT                                   \
 782         "setenv bootargs root=/dev/$bdev rw "           \
 783         "console=$consoledev,$baudrate $othbootargs;"   \
 784         "tftp $loadaddr $bootfile;"                     \
 785         "tftp $fdtaddr $fdtfile;"                       \
 786         "bootm $loadaddr - $fdtaddr"
 787
 788 #define CONFIG_NFSBOOTCOMMAND                   \
 789         "setenv bootargs root=/dev/nfs rw "     \
 790         "nfsroot=$serverip:$rootpath "          \
 791         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 792         "console=$consoledev,$baudrate $othbootargs;"   \
 793         "tftp $loadaddr $bootfile;"             \
 794         "tftp $fdtaddr $fdtfile;"               \
 795         "bootm $loadaddr - $fdtaddr"
 796
 797 #define CONFIG_RAMBOOTCOMMAND                           \
 798         "setenv bootargs root=/dev/ram rw "             \
 799         "console=$consoledev,$baudrate $othbootargs;"   \
 800         "tftp $ramdiskaddr $ramdiskfile;"               \
 801         "tftp $loadaddr $bootfile;"                     \
 802         "tftp $fdtaddr $fdtfile;"                       \
 803         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 804
 805 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 806
 807 #include <asm/fsl_secure_boot.h>
 808
 809 #endif  /* __CONFIG_H */