env: Move env_get_yesno() to env.h
[oweals/u-boot.git] / include / common.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2000-2009
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  */
6
7 #ifndef __COMMON_H_
8 #define __COMMON_H_     1
9
10 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
11
12 typedef unsigned char           uchar;
13 typedef volatile unsigned long  vu_long;
14 typedef volatile unsigned short vu_short;
15 typedef volatile unsigned char  vu_char;
16
17 #include <config.h>
18 #include <errno.h>
19 #include <time.h>
20 #include <asm-offsets.h>
21 #include <linux/bitops.h>
22 #include <linux/bug.h>
23 #include <linux/delay.h>
24 #include <linux/types.h>
25 #include <linux/printk.h>
26 #include <linux/string.h>
27 #include <linux/stringify.h>
28 #include <asm/ptrace.h>
29 #include <stdarg.h>
30 #include <stdio.h>
31 #include <linux/kernel.h>
32
33 #include <part.h>
34 #include <flash.h>
35 #include <image.h>
36
37 #ifdef __LP64__
38 #define CONFIG_SYS_SUPPORT_64BIT_DATA
39 #endif
40
41 #include <log.h>
42
43 typedef void (interrupt_handler_t)(void *);
44
45 #include <asm/u-boot.h> /* boot information for Linux kernel */
46 #include <asm/global_data.h>    /* global data used for startup functions */
47
48 #if defined(CONFIG_ENV_IS_EMBEDDED)
49 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
50 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
51         (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
52       defined(CONFIG_ENV_IS_IN_NVRAM)
53 #define TOTAL_MALLOC_LEN        (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
54 #else
55 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
56 #endif
57
58 /* startup functions, used in:
59  * common/board_f.c
60  * common/init/board_init.c
61  * common/board_r.c
62  * common/board_info.c
63  */
64 #include <init.h>
65
66 /*
67  * Function Prototypes
68  */
69 void    hang            (void) __attribute__ ((noreturn));
70
71 int     cpu_init(void);
72
73 #include <display_options.h>
74
75 /* common/main.c */
76 void    main_loop       (void);
77 int run_command(const char *cmd, int flag);
78 int run_command_repeatable(const char *cmd, int flag);
79
80 /**
81  * Run a list of commands separated by ; or even \0
82  *
83  * Note that if 'len' is not -1, then the command does not need to be nul
84  * terminated, Memory will be allocated for the command in that case.
85  *
86  * @param cmd   List of commands to run, each separated bu semicolon
87  * @param len   Length of commands excluding terminator if known (-1 if not)
88  * @param flag  Execution flags (CMD_FLAG_...)
89  * @return 0 on success, or != 0 on error.
90  */
91 int run_command_list(const char *cmd, int len, int flag);
92
93 int checkflash(void);
94 int checkdram(void);
95 extern u8 __dtb_dt_begin[];     /* embedded device tree blob */
96 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
97 int mdm_init(void);
98
99 /**
100  * Show the DRAM size in a board-specific way
101  *
102  * This is used by boards to display DRAM information in their own way.
103  *
104  * @param size  Size of DRAM (which should be displayed along with other info)
105  */
106 void board_show_dram(phys_size_t size);
107
108 /**
109  * Get the uppermost pointer that is valid to access
110  *
111  * Some systems may not map all of their address space. This function allows
112  * boards to indicate what their highest support pointer value is for DRAM
113  * access.
114  *
115  * @param total_size    Size of U-Boot (unused?)
116  */
117 ulong board_get_usable_ram_top(ulong total_size);
118
119 /**
120  * arch_fixup_fdt() - Write arch-specific information to fdt
121  *
122  * Defined in arch/$(ARCH)/lib/bootm-fdt.c
123  *
124  * @blob:       FDT blob to write to
125  * @return 0 if ok, or -ve FDT_ERR_... on failure
126  */
127 int arch_fixup_fdt(void *blob);
128
129 /* common/flash.c */
130 void flash_perror (int);
131
132 /* common/cmd_source.c */
133 int     source (ulong addr, const char *fit_uname);
134
135 extern ulong load_addr;         /* Default Load Address */
136 extern ulong save_addr;         /* Default Save Address */
137 extern ulong save_size;         /* Default Save Size */
138
139 /* common/cmd_net.c */
140 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
141
142 /* common/cmd_fat.c */
143 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
144
145 /* common/cmd_ext2.c */
146 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
147
148 /**
149  * env_get() - Look up the value of an environment variable
150  *
151  * In U-Boot proper this can be called before relocation (which is when the
152  * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that
153  * case this function calls env_get_f().
154  *
155  * @varname:    Variable to look up
156  * @return value of variable, or NULL if not found
157  */
158 char *env_get(const char *varname);
159
160 /**
161  * env_get_hex() - Return an environment variable as a hex value
162  *
163  * Decode an environment as a hex number (it may or may not have a 0x
164  * prefix). If the environment variable cannot be found, or does not start
165  * with hex digits, the default value is returned.
166  *
167  * @varname:            Variable to decode
168  * @default_val:        Value to return on error
169  */
170 ulong env_get_hex(const char *varname, ulong default_val);
171
172 /**
173  * env_set() - set an environment variable
174  *
175  * This sets or deletes the value of an environment variable. For setting the
176  * value the variable is created if it does not already exist.
177  *
178  * @varname: Variable to adjust
179  * @value: Value to set for the variable, or NULL or "" to delete the variable
180  * @return 0 if OK, 1 on error
181  */
182 int env_set(const char *varname, const char *value);
183
184 void    pci_init_board(void);
185
186 /* common/exports.c */
187 void    jumptable_init(void);
188
189 /* common/kallsysm.c */
190 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
191
192 /* common/memsize.c */
193 long    get_ram_size  (long *, long);
194 phys_size_t get_effective_memsize(void);
195
196 /* $(BOARD)/$(BOARD).c */
197 void    reset_phy     (void);
198 void    fdc_hw_init   (void);
199
200 /* $(BOARD)/eeprom.c */
201 #ifdef CONFIG_CMD_EEPROM
202 void eeprom_init  (int bus);
203 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
204 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
205 #else
206 /*
207  * Some EEPROM code is depecated because it used the legacy I2C interface. Add
208  * some macros here so we don't have to touch every one of those uses
209  */
210 #define eeprom_init(bus)
211 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
212 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
213 #endif
214
215 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
216 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
217 #endif
218
219 /* $(BOARD)/$(BOARD).c */
220 int board_early_init_f (void);
221 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
222 int board_late_init (void);
223 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
224 int board_early_init_r (void);
225
226 #if defined(CONFIG_SYS_DRAM_TEST)
227 int testdram(void);
228 #endif /* CONFIG_SYS_DRAM_TEST */
229
230 /* $(CPU)/start.S */
231 int     icache_status (void);
232 void    icache_enable (void);
233 void    icache_disable(void);
234 int     dcache_status (void);
235 void    dcache_enable (void);
236 void    dcache_disable(void);
237 void    mmu_disable(void);
238 #if defined(CONFIG_ARM)
239 void    relocate_code(ulong);
240 #else
241 void    relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
242 #endif
243 ulong   get_endaddr   (void);
244 void    trap_init     (ulong);
245
246 /* $(CPU)/cpu.c */
247 static inline int cpumask_next(int cpu, unsigned int mask)
248 {
249         for (cpu++; !((1 << cpu) & mask); cpu++)
250                 ;
251
252         return cpu;
253 }
254
255 #define for_each_cpu(iter, cpu, num_cpus, mask) \
256         for (iter = 0, cpu = cpumask_next(-1, mask); \
257                 iter < num_cpus; \
258                 iter++, cpu = cpumask_next(cpu, mask)) \
259
260 int     cpu_numcores  (void);
261 int     cpu_num_dspcores(void);
262 u32     cpu_mask      (void);
263 u32     cpu_dsp_mask(void);
264 int     is_core_valid (unsigned int);
265
266 void s_init(void);
267
268 int     checkcpu      (void);
269 int     checkicache   (void);
270 int     checkdcache   (void);
271 void    upmconfig     (unsigned int, unsigned int *, unsigned int);
272 ulong   get_tbclk     (void);
273 void    reset_misc    (void);
274 void    reset_cpu     (ulong addr);
275 void ft_cpu_setup(void *blob, bd_t *bd);
276 void ft_pci_setup(void *blob, bd_t *bd);
277
278 void smp_set_core_boot_addr(unsigned long addr, int corenr);
279 void smp_kick_all_cpus(void);
280
281 /* $(CPU)/serial.c */
282 int     serial_init   (void);
283 void    serial_setbrg (void);
284 void    serial_putc   (const char);
285 void    serial_putc_raw(const char);
286 void    serial_puts   (const char *);
287 int     serial_getc   (void);
288 int     serial_tstc   (void);
289
290 /* $(CPU)/speed.c */
291 int     get_clocks (void);
292 ulong   get_bus_freq  (ulong);
293 int get_serial_clock(void);
294
295 /* $(CPU)/interrupts.c */
296 int     interrupt_init     (void);
297 void    timer_interrupt    (struct pt_regs *);
298 void    external_interrupt (struct pt_regs *);
299 void    irq_install_handler(int, interrupt_handler_t *, void *);
300 void    irq_free_handler   (int);
301 void    reset_timer        (void);
302
303 /* Return value of monotonic microsecond timer */
304 unsigned long timer_get_us(void);
305
306 void    enable_interrupts  (void);
307 int     disable_interrupts (void);
308
309 /* $(CPU)/.../commproc.c */
310 void    bootcount_store (ulong);
311 ulong   bootcount_load (void);
312
313 /* $(CPU)/.../<eth> */
314 void mii_init (void);
315
316 /* arch/$(ARCH)/lib/cache.c */
317 void    enable_caches(void);
318 void    flush_cache   (unsigned long, unsigned long);
319 void    flush_dcache_all(void);
320 void    flush_dcache_range(unsigned long start, unsigned long stop);
321 void    invalidate_dcache_range(unsigned long start, unsigned long stop);
322 void    invalidate_dcache_all(void);
323 void    invalidate_icache_all(void);
324
325 enum {
326         /* Disable caches (else flush caches but leave them active) */
327         CBL_DISABLE_CACHES              = 1 << 0,
328         CBL_SHOW_BOOTSTAGE_REPORT       = 1 << 1,
329
330         CBL_ALL                         = 3,
331 };
332
333 /**
334  * Clean up ready for linux
335  *
336  * @param flags         Flags to control what is done
337  */
338 int cleanup_before_linux_select(int flags);
339
340 /* arch/$(ARCH)/lib/ticks.S */
341 uint64_t get_ticks(void);
342 void    wait_ticks    (unsigned long);
343
344 /* arch/$(ARCH)/lib/time.c */
345 ulong   usec2ticks    (unsigned long usec);
346 ulong   ticks2usec    (unsigned long ticks);
347
348 /* lib/lz4_wrapper.c */
349 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
350
351 /* lib/qsort.c */
352 void qsort(void *base, size_t nmemb, size_t size,
353            int(*compar)(const void *, const void *));
354 int strcmp_compar(const void *, const void *);
355
356 /* lib/uuid.c */
357 #include <uuid.h>
358
359 /* lib/vsprintf.c */
360 #include <vsprintf.h>
361
362 /* lib/strmhz.c */
363 char *  strmhz(char *buf, unsigned long hz);
364
365 /* lib/crc32.c */
366 #include <u-boot/crc.h>
367
368 /* lib/rand.c */
369 #define RAND_MAX -1U
370 void srand(unsigned int seed);
371 unsigned int rand(void);
372 unsigned int rand_r(unsigned int *seedp);
373
374 /*
375  * STDIO based functions (can always be used)
376  */
377 /* serial stuff */
378 int     serial_printf (const char *fmt, ...)
379                 __attribute__ ((format (__printf__, 1, 2)));
380
381 /* lib/net_utils.c */
382 #include <net.h>
383 static inline struct in_addr env_get_ip(char *var)
384 {
385         return string_to_ip(env_get(var));
386 }
387
388 int     pcmcia_init (void);
389
390 #ifdef CONFIG_LED_STATUS
391 # include <status_led.h>
392 #endif
393
394 #include <bootstage.h>
395
396 #ifdef CONFIG_SHOW_ACTIVITY
397 void show_activity(int arg);
398 #endif
399
400 /* Multicore arch functions */
401 #ifdef CONFIG_MP
402 int cpu_status(u32 nr);
403 int cpu_reset(u32 nr);
404 int cpu_disable(u32 nr);
405 int cpu_release(u32 nr, int argc, char * const argv[]);
406 #endif
407
408 #else   /* __ASSEMBLY__ */
409
410 #endif  /* __ASSEMBLY__ */
411
412 /* Put only stuff here that the assembler can digest */
413
414 #ifdef CONFIG_POST
415 #define CONFIG_HAS_POST
416 #ifndef CONFIG_POST_ALT_LIST
417 #define CONFIG_POST_STD_LIST
418 #endif
419 #endif
420
421 #define ROUND(a,b)              (((a) + (b) - 1) & ~((b) - 1))
422
423 /*
424  * check_member() - Check the offset of a structure member
425  *
426  * @structure:  Name of structure (e.g. global_data)
427  * @member:     Name of member (e.g. baudrate)
428  * @offset:     Expected offset in bytes
429  */
430 #define check_member(structure, member, offset) _Static_assert( \
431         offsetof(struct structure, member) == offset, \
432         "`struct " #structure "` offset for `" #member "` is not " #offset)
433
434 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
435 #ifdef CONFIG_EFI_STUB
436 #define ll_boot_init()  false
437 #else
438 #define ll_boot_init()  true
439 #endif
440
441 /* Pull in stuff for the build system */
442 #ifdef DO_DEPS_ONLY
443 # include <environment.h>
444 #endif
445
446 #endif  /* __COMMON_H_ */