common: Drop board_show_dram()
[oweals/u-boot.git] / include / common.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Common header file for U-Boot
4  *
5  * This file still includes quite a bit of stuff that should be in separate
6  * headers. Please think before adding more things.
7  * Patches to remove things are welcome.
8  *
9  * (C) Copyright 2000-2009
10  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
11  */
12
13 #ifndef __COMMON_H_
14 #define __COMMON_H_     1
15
16 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
17
18 typedef unsigned char           uchar;
19 typedef volatile unsigned long  vu_long;
20 typedef volatile unsigned short vu_short;
21 typedef volatile unsigned char  vu_char;
22
23 #include <config.h>
24 #include <errno.h>
25 #include <time.h>
26 #include <asm-offsets.h>
27 #include <linux/bitops.h>
28 #include <linux/bug.h>
29 #include <linux/delay.h>
30 #include <linux/types.h>
31 #include <linux/printk.h>
32 #include <linux/string.h>
33 #include <linux/stringify.h>
34 #include <asm/ptrace.h>
35 #include <stdarg.h>
36 #include <stdio.h>
37 #include <linux/kernel.h>
38
39 #include <part.h>
40 #include <flash.h>
41 #include <image.h>
42
43 #ifdef __LP64__
44 #define CONFIG_SYS_SUPPORT_64BIT_DATA
45 #endif
46
47 #include <log.h>
48
49 #include <asm/u-boot.h> /* boot information for Linux kernel */
50 #include <asm/global_data.h>    /* global data used for startup functions */
51
52 /* startup functions, used in:
53  * common/board_f.c
54  * common/init/board_init.c
55  * common/board_r.c
56  * common/board_info.c
57  */
58 #include <init.h>
59
60 /*
61  * Function Prototypes
62  */
63 void    hang            (void) __attribute__ ((noreturn));
64
65 #include <display_options.h>
66
67 /* common/main.c */
68 void    main_loop       (void);
69
70 int checkflash(void);
71 int checkdram(void);
72 extern u8 __dtb_dt_begin[];     /* embedded device tree blob */
73 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */
74 int mdm_init(void);
75
76 /**
77  * Get the uppermost pointer that is valid to access
78  *
79  * Some systems may not map all of their address space. This function allows
80  * boards to indicate what their highest support pointer value is for DRAM
81  * access.
82  *
83  * @param total_size    Size of U-Boot (unused?)
84  */
85 ulong board_get_usable_ram_top(ulong total_size);
86
87 /**
88  * arch_fixup_fdt() - Write arch-specific information to fdt
89  *
90  * Defined in arch/$(ARCH)/lib/bootm-fdt.c
91  *
92  * @blob:       FDT blob to write to
93  * @return 0 if ok, or -ve FDT_ERR_... on failure
94  */
95 int arch_fixup_fdt(void *blob);
96
97 /* common/flash.c */
98 void flash_perror (int);
99
100 /* common/cmd_source.c */
101 int     source (ulong addr, const char *fit_uname);
102
103 extern ulong load_addr;         /* Default Load Address */
104 extern ulong save_addr;         /* Default Save Address */
105 extern ulong save_size;         /* Default Save Size */
106
107 /* common/cmd_net.c */
108 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
109
110 /* common/cmd_fat.c */
111 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
112
113 /* common/cmd_ext2.c */
114 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
115
116 void    pci_init_board(void);
117
118 /* common/exports.c */
119 void    jumptable_init(void);
120
121 /* common/kallsysm.c */
122 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
123
124 /* common/memsize.c */
125 long    get_ram_size  (long *, long);
126 phys_size_t get_effective_memsize(void);
127
128 /* $(BOARD)/$(BOARD).c */
129 void    reset_phy     (void);
130 void    fdc_hw_init   (void);
131
132 /* $(BOARD)/eeprom.c */
133 #ifdef CONFIG_CMD_EEPROM
134 void eeprom_init  (int bus);
135 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
136 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
137 #else
138 /*
139  * Some EEPROM code is depecated because it used the legacy I2C interface. Add
140  * some macros here so we don't have to touch every one of those uses
141  */
142 #define eeprom_init(bus)
143 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
144 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS)
145 #endif
146
147 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
148 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
149 #endif
150
151 /* $(BOARD)/$(BOARD).c */
152 int board_early_init_f (void);
153 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */
154 int board_late_init (void);
155 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
156 int board_early_init_r (void);
157
158 #if defined(CONFIG_SYS_DRAM_TEST)
159 int testdram(void);
160 #endif /* CONFIG_SYS_DRAM_TEST */
161
162 #if defined(CONFIG_ARM)
163 void    relocate_code(ulong);
164 #else
165 void    relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
166 #endif
167 ulong   get_endaddr   (void);
168 void    trap_init     (ulong);
169
170 void s_init(void);
171
172 void    upmconfig     (unsigned int, unsigned int *, unsigned int);
173 ulong   get_tbclk     (void);
174 void    reset_misc    (void);
175 void    reset_cpu     (ulong addr);
176 void ft_cpu_setup(void *blob, bd_t *bd);
177 void ft_pci_setup(void *blob, bd_t *bd);
178
179 /* $(CPU)/speed.c */
180 int     get_clocks (void);
181 ulong   get_bus_freq  (ulong);
182 int get_serial_clock(void);
183
184 /* lib/uuid.c */
185 #include <uuid.h>
186
187 /* lib/vsprintf.c */
188 #include <vsprintf.h>
189
190 /* lib/net_utils.c */
191 #include <net.h>
192
193 #include <bootstage.h>
194
195 #else   /* __ASSEMBLY__ */
196
197 #endif  /* __ASSEMBLY__ */
198
199 /* Put only stuff here that the assembler can digest */
200
201 #ifdef CONFIG_POST
202 #define CONFIG_HAS_POST
203 #ifndef CONFIG_POST_ALT_LIST
204 #define CONFIG_POST_STD_LIST
205 #endif
206 #endif
207
208 #define ROUND(a,b)              (((a) + (b) - 1) & ~((b) - 1))
209
210 /*
211  * check_member() - Check the offset of a structure member
212  *
213  * @structure:  Name of structure (e.g. global_data)
214  * @member:     Name of member (e.g. baudrate)
215  * @offset:     Expected offset in bytes
216  */
217 #define check_member(structure, member, offset) _Static_assert( \
218         offsetof(struct structure, member) == offset, \
219         "`struct " #structure "` offset for `" #member "` is not " #offset)
220
221 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
222 #ifdef CONFIG_EFI_STUB
223 #define ll_boot_init()  false
224 #else
225 #define ll_boot_init()  true
226 #endif
227
228 /* Pull in stuff for the build system */
229 #ifdef DO_DEPS_ONLY
230 # include <env_internal.h>
231 #endif
232
233 #endif  /* __COMMON_H_ */