common: Always include errno.h in common.h
[oweals/u-boot.git] / include / common.h
1 /*
2  * (C) Copyright 2000-2009
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __COMMON_H_
9 #define __COMMON_H_     1
10
11 #ifndef __ASSEMBLY__            /* put C only stuff in this section */
12
13 typedef unsigned char           uchar;
14 typedef volatile unsigned long  vu_long;
15 typedef volatile unsigned short vu_short;
16 typedef volatile unsigned char  vu_char;
17
18 #include <config.h>
19 #include <errno.h>
20 #include <asm-offsets.h>
21 #include <linux/bitops.h>
22 #include <linux/types.h>
23 #include <linux/string.h>
24 #include <linux/stringify.h>
25 #include <asm/ptrace.h>
26 #include <stdarg.h>
27 #include <linux/kernel.h>
28 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
29 #include <pci.h>
30 #endif
31 #if defined(CONFIG_8xx)
32 #include <asm/8xx_immap.h>
33 #if defined(CONFIG_MPC859)      || defined(CONFIG_MPC859T)      || \
34     defined(CONFIG_MPC866)      || \
35     defined(CONFIG_MPC866P)
36 # define CONFIG_MPC866_FAMILY 1
37 #elif defined(CONFIG_MPC885)
38 # define CONFIG_MPC885_FAMILY   1
39 #endif
40 #if   defined(CONFIG_MPC860)       \
41    || defined(CONFIG_MPC860T)      \
42    || defined(CONFIG_MPC866_FAMILY) \
43    || defined(CONFIG_MPC885_FAMILY)
44 # define CONFIG_MPC86x 1
45 #endif
46 #elif defined(CONFIG_5xx)
47 #include <asm/5xx_immap.h>
48 #elif defined(CONFIG_MPC5xxx)
49 #include <mpc5xxx.h>
50 #elif defined(CONFIG_MPC512X)
51 #include <asm/immap_512x.h>
52 #elif defined(CONFIG_MPC8260)
53 #if   defined(CONFIG_MPC8247) \
54    || defined(CONFIG_MPC8272)
55 #define CONFIG_MPC8272_FAMILY   1
56 #endif
57 #include <asm/immap_8260.h>
58 #endif
59 #ifdef CONFIG_MPC86xx
60 #include <mpc86xx.h>
61 #include <asm/immap_86xx.h>
62 #endif
63 #ifdef CONFIG_MPC85xx
64 #include <mpc85xx.h>
65 #include <asm/immap_85xx.h>
66 #endif
67 #ifdef CONFIG_MPC83xx
68 #include <mpc83xx.h>
69 #include <asm/immap_83xx.h>
70 #endif
71 #ifdef  CONFIG_4xx
72 #include <asm/ppc4xx.h>
73 #endif
74 #ifdef CONFIG_BLACKFIN
75 #include <asm/blackfin.h>
76 #endif
77 #ifdef CONFIG_SOC_DA8XX
78 #include <asm/arch/hardware.h>
79 #endif
80 #ifdef CONFIG_FSL_LSCH3
81 #include <asm/arch/immap_lsch3.h>
82 #endif
83 #ifdef CONFIG_FSL_LSCH2
84 #include <asm/arch/immap_lsch2.h>
85 #endif
86
87 #include <part.h>
88 #include <flash.h>
89 #include <image.h>
90
91 /* Bring in printf format macros if inttypes.h is included */
92 #define __STDC_FORMAT_MACROS
93
94 #ifdef __LP64__
95 #define CONFIG_SYS_SUPPORT_64BIT_DATA
96 #endif
97
98 #ifdef DEBUG
99 #define _DEBUG  1
100 #else
101 #define _DEBUG  0
102 #endif
103
104 #ifndef pr_fmt
105 #define pr_fmt(fmt) fmt
106 #endif
107
108 /*
109  * Output a debug text when condition "cond" is met. The "cond" should be
110  * computed by a preprocessor in the best case, allowing for the best
111  * optimization.
112  */
113 #define debug_cond(cond, fmt, args...)                  \
114         do {                                            \
115                 if (cond)                               \
116                         printf(pr_fmt(fmt), ##args);    \
117         } while (0)
118
119 #define debug(fmt, args...)                     \
120         debug_cond(_DEBUG, fmt, ##args)
121
122 /*
123  * An assertion is run-time check done in debug mode only. If DEBUG is not
124  * defined then it is skipped. If DEBUG is defined and the assertion fails,
125  * then it calls panic*( which may or may not reset/halt U-Boot (see
126  * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
127  * before release, and after release it is hoped that they don't matter. But
128  * in any case these failing assertions cannot be fixed with a reset (which
129  * may just do the same assertion again).
130  */
131 void __assert_fail(const char *assertion, const char *file, unsigned line,
132                    const char *function);
133 #define assert(x) \
134         ({ if (!(x) && _DEBUG) \
135                 __assert_fail(#x, __FILE__, __LINE__, __func__); })
136
137 #define error(fmt, args...) do {                                        \
138                 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n",       \
139                         ##args, __FILE__, __LINE__, __func__);          \
140 } while (0)
141
142 #ifndef BUG
143 #define BUG() do { \
144         printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
145         panic("BUG!"); \
146 } while (0)
147 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
148 #endif /* BUG */
149
150 typedef void (interrupt_handler_t)(void *);
151
152 #include <asm/u-boot.h> /* boot information for Linux kernel */
153 #include <asm/global_data.h>    /* global data used for startup functions */
154
155 /*
156  * enable common handling for all TQM8xxL/M boards:
157  * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
158  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
159  *                  and for the TQM885D board
160  */
161 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
162     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
163     defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
164 # ifndef CONFIG_TQM8xxM
165 #  define CONFIG_TQM8xxM
166 # endif
167 #endif
168 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
169     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
170     defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
171     defined(CONFIG_TQM885D)
172 # ifndef CONFIG_TQM8xxL
173 #  define CONFIG_TQM8xxL
174 # endif
175 #endif
176
177 #if defined(CONFIG_ENV_IS_EMBEDDED)
178 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
179 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
180         (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
181       defined(CONFIG_ENV_IS_IN_NVRAM)
182 #define TOTAL_MALLOC_LEN        (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
183 #else
184 #define TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
185 #endif
186
187 /*
188  * Function Prototypes
189  */
190 int dram_init(void);
191
192 void    hang            (void) __attribute__ ((noreturn));
193
194 int     timer_init(void);
195 int     cpu_init(void);
196
197 /* */
198 phys_size_t initdram (int);
199
200 #include <display_options.h>
201
202 /* common/main.c */
203 void    main_loop       (void);
204 int run_command(const char *cmd, int flag);
205 int run_command_repeatable(const char *cmd, int flag);
206
207 /**
208  * Run a list of commands separated by ; or even \0
209  *
210  * Note that if 'len' is not -1, then the command does not need to be nul
211  * terminated, Memory will be allocated for the command in that case.
212  *
213  * @param cmd   List of commands to run, each separated bu semicolon
214  * @param len   Length of commands excluding terminator if known (-1 if not)
215  * @param flag  Execution flags (CMD_FLAG_...)
216  * @return 0 on success, or != 0 on error.
217  */
218 int run_command_list(const char *cmd, int len, int flag);
219
220 /* arch/$(ARCH)/lib/board.c */
221 void board_init_f(ulong);
222 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
223
224 /**
225  * ulong board_init_f_alloc_reserve - allocate reserved area
226  *
227  * This function is called by each architecture very early in the start-up
228  * code to allow the C runtime to reserve space on the stack for writable
229  * 'globals' such as GD and the malloc arena.
230  *
231  * @top:        top of the reserve area, growing down.
232  * @return:     bottom of reserved area
233  */
234 ulong board_init_f_alloc_reserve(ulong top);
235
236 /**
237  * board_init_f_init_reserve - initialize the reserved area(s)
238  *
239  * This function is called once the C runtime has allocated the reserved
240  * area on the stack. It must initialize the GD at the base of that area.
241  *
242  * @base:       top from which reservation was done
243  */
244 void board_init_f_init_reserve(ulong base);
245
246 /**
247  * arch_setup_gd() - Set up the global_data pointer
248  *
249  * This pointer is special in some architectures and cannot easily be assigned
250  * to. For example on x86 it is implemented by adding a specific record to its
251  * Global Descriptor Table! So we we provide a function to carry out this task.
252  * For most architectures this can simply be:
253  *
254  *    gd = gd_ptr;
255  *
256  * @gd_ptr:     Pointer to global data
257  */
258 void arch_setup_gd(gd_t *gd_ptr);
259
260 int checkboard(void);
261 int show_board_info(void);
262 int checkflash(void);
263 int checkdram(void);
264 int last_stage_init(void);
265 extern ulong monitor_flash_len;
266 int mac_read_from_eeprom(void);
267 extern u8 __dtb_dt_begin[];     /* embedded device tree blob */
268 int set_cpu_clk_info(void);
269 int mdm_init(void);
270 #if defined(CONFIG_DISPLAY_CPUINFO)
271 int print_cpuinfo(void);
272 #else
273 static inline int print_cpuinfo(void)
274 {
275         return 0;
276 }
277 #endif
278 int update_flash_size(int flash_size);
279 int arch_early_init_r(void);
280
281 /**
282  * arch_cpu_init_dm() - init CPU after driver model is available
283  *
284  * This is called immediately after driver model is available before
285  * relocation. This is similar to arch_cpu_init() but is able to reference
286  * devices
287  *
288  * @return 0 if OK, -ve on error
289  */
290 int arch_cpu_init_dm(void);
291
292 /**
293  * Reserve all necessary stacks
294  *
295  * This is used in generic board init sequence in common/board_f.c. Each
296  * architecture could provide this function to tailor the required stacks.
297  *
298  * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
299  * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
300  * require only this can leave it untouched.
301  *
302  * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
303  * positions of the stack. The stack pointer(s) will be set to this later.
304  * gd->irq_sp is only required, if the architecture needs it.
305  *
306  * @return 0 if no error
307  */
308 __weak int arch_reserve_stacks(void);
309
310 /**
311  * Show the DRAM size in a board-specific way
312  *
313  * This is used by boards to display DRAM information in their own way.
314  *
315  * @param size  Size of DRAM (which should be displayed along with other info)
316  */
317 void board_show_dram(phys_size_t size);
318
319 /**
320  * arch_fixup_fdt() - Write arch-specific information to fdt
321  *
322  * Defined in arch/$(ARCH)/lib/bootm-fdt.c
323  *
324  * @blob:       FDT blob to write to
325  * @return 0 if ok, or -ve FDT_ERR_... on failure
326  */
327 int arch_fixup_fdt(void *blob);
328
329 /* common/flash.c */
330 void flash_perror (int);
331
332 /* common/cmd_source.c */
333 int     source (ulong addr, const char *fit_uname);
334
335 extern ulong load_addr;         /* Default Load Address */
336 extern ulong save_addr;         /* Default Save Address */
337 extern ulong save_size;         /* Default Save Size */
338
339 /* common/cmd_doc.c */
340 void    doc_probe(unsigned long physadr);
341
342 /* common/cmd_net.c */
343 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
344
345 /* common/cmd_fat.c */
346 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
347
348 /* common/cmd_ext2.c */
349 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
350
351 /* common/cmd_nvedit.c */
352 int     env_init     (void);
353 void    env_relocate (void);
354 int     envmatch     (uchar *, int);
355
356 /* Avoid unfortunate conflict with libc's getenv() */
357 #ifdef CONFIG_SANDBOX
358 #define getenv uboot_getenv
359 #endif
360 char    *getenv      (const char *);
361 int     getenv_f     (const char *name, char *buf, unsigned len);
362 ulong getenv_ulong(const char *name, int base, ulong default_val);
363
364 /**
365  * getenv_hex() - Return an environment variable as a hex value
366  *
367  * Decode an environment as a hex number (it may or may not have a 0x
368  * prefix). If the environment variable cannot be found, or does not start
369  * with hex digits, the default value is returned.
370  *
371  * @varname:            Variable to decode
372  * @default_val:        Value to return on error
373  */
374 ulong getenv_hex(const char *varname, ulong default_val);
375
376 /*
377  * Read an environment variable as a boolean
378  * Return -1 if variable does not exist (default to true)
379  */
380 int getenv_yesno(const char *var);
381 int     saveenv      (void);
382 int     setenv       (const char *, const char *);
383 int setenv_ulong(const char *varname, ulong value);
384 int setenv_hex(const char *varname, ulong value);
385 /**
386  * setenv_addr - Set an environment variable to an address in hex
387  *
388  * @varname:    Environment variable to set
389  * @addr:       Value to set it to
390  * @return 0 if ok, 1 on error
391  */
392 static inline int setenv_addr(const char *varname, const void *addr)
393 {
394         return setenv_hex(varname, (ulong)addr);
395 }
396
397 #ifdef CONFIG_ARM
398 # include <asm/mach-types.h>
399 # include <asm/setup.h>
400 # include <asm/u-boot-arm.h>    /* ARM version to be fixed! */
401 #endif /* CONFIG_ARM */
402 #ifdef CONFIG_X86               /* x86 version to be fixed! */
403 # include <asm/u-boot-x86.h>
404 #endif /* CONFIG_X86 */
405 #ifdef CONFIG_SANDBOX
406 # include <asm/u-boot-sandbox.h>        /* TODO(sjg) what needs to be fixed? */
407 #endif
408 #ifdef CONFIG_NDS32
409 # include <asm/mach-types.h>
410 # include <asm/setup.h>
411 # include <asm/u-boot-nds32.h>
412 #endif /* CONFIG_NDS32 */
413 #ifdef CONFIG_MIPS
414 # include <asm/u-boot-mips.h>
415 #endif /* CONFIG_MIPS */
416 #ifdef CONFIG_ARC
417 # include <asm/u-boot-arc.h>
418 #endif /* CONFIG_ARC */
419
420 #ifdef CONFIG_AUTO_COMPLETE
421 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
422 #endif
423 int get_env_id (void);
424
425 void    pci_init      (void);
426 void    pci_init_board(void);
427
428 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
429     int    pci_pre_init        (struct pci_controller *);
430     int    is_pci_host         (struct pci_controller *);
431 #endif
432
433 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
434 #   if defined(CONFIG_SYS_PCI_TARGET_INIT)
435         void    pci_target_init      (struct pci_controller *);
436 #   endif
437 #   if defined(CONFIG_SYS_PCI_MASTER_INIT)
438         void    pci_master_init      (struct pci_controller *);
439 #   endif
440 #if defined(CONFIG_440SPE) || \
441     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
442     defined(CONFIG_405EX)
443    void pcie_setup_hoses(int busno);
444 #endif
445 #endif
446
447 int     misc_init_f   (void);
448 int     misc_init_r   (void);
449
450 /* common/exports.c */
451 void    jumptable_init(void);
452
453 /* common/kallsysm.c */
454 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
455
456 /* api/api.c */
457 void    api_init (void);
458
459 /* common/memsize.c */
460 long    get_ram_size  (long *, long);
461 phys_size_t get_effective_memsize(void);
462
463 /* $(BOARD)/$(BOARD).c */
464 void    reset_phy     (void);
465 void    fdc_hw_init   (void);
466
467 /* $(BOARD)/eeprom.c */
468 void eeprom_init  (int bus);
469 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
470 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
471
472 /*
473  * Set this up regardless of board
474  * type, to prevent errors.
475  */
476 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
477 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
478 #else
479 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
480 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
481 #endif
482 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
483
484 #if defined(CONFIG_SPI)
485 extern void spi_init_f (void);
486 extern void spi_init_r (void);
487 extern ssize_t spi_read  (uchar *, int, uchar *, int);
488 extern ssize_t spi_write (uchar *, int, uchar *, int);
489 #endif
490
491 /* $(BOARD)/$(BOARD).c */
492 int board_early_init_f (void);
493 int board_late_init (void);
494 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
495 int board_early_init_r (void);
496 void board_poweroff (void);
497
498 #if defined(CONFIG_SYS_DRAM_TEST)
499 int testdram(void);
500 #endif /* CONFIG_SYS_DRAM_TEST */
501
502 /* $(CPU)/start.S */
503 #if defined(CONFIG_5xx) || \
504     defined(CONFIG_8xx)
505 uint    get_immr      (uint);
506 #endif
507 #if defined(CONFIG_MPC5xxx)
508 uint    get_svr       (void);
509 #endif
510 uint    get_pvr       (void);
511 uint    get_svr       (void);
512 uint    rd_ic_cst     (void);
513 void    wr_ic_cst     (uint);
514 void    wr_ic_adr     (uint);
515 uint    rd_dc_cst     (void);
516 void    wr_dc_cst     (uint);
517 void    wr_dc_adr     (uint);
518 int     icache_status (void);
519 void    icache_enable (void);
520 void    icache_disable(void);
521 int     dcache_status (void);
522 void    dcache_enable (void);
523 void    dcache_disable(void);
524 void    mmu_disable(void);
525 #if defined(CONFIG_ARM)
526 void    relocate_code(ulong);
527 #else
528 void    relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
529 #endif
530 ulong   get_endaddr   (void);
531 void    trap_init     (ulong);
532 #if defined (CONFIG_4xx)        || \
533     defined (CONFIG_MPC5xxx)    || \
534     defined (CONFIG_MPC85xx)    || \
535     defined (CONFIG_MPC86xx)    || \
536     defined (CONFIG_MPC83xx)
537 unsigned char   in8(unsigned int);
538 void            out8(unsigned int, unsigned char);
539 unsigned short  in16(unsigned int);
540 unsigned short  in16r(unsigned int);
541 void            out16(unsigned int, unsigned short value);
542 void            out16r(unsigned int, unsigned short value);
543 unsigned long   in32(unsigned int);
544 unsigned long   in32r(unsigned int);
545 void            out32(unsigned int, unsigned long value);
546 void            out32r(unsigned int, unsigned long value);
547 void            ppcDcbf(unsigned long value);
548 void            ppcDcbi(unsigned long value);
549 void            ppcSync(void);
550 void            ppcDcbz(unsigned long value);
551 #endif
552 #if defined (CONFIG_MICROBLAZE)
553 unsigned short  in16(unsigned int);
554 void            out16(unsigned int, unsigned short value);
555 #endif
556
557 #if defined (CONFIG_MPC83xx)
558 void            ppcDWload(unsigned int *addr, unsigned int *ret);
559 void            ppcDWstore(unsigned int *addr, unsigned int *value);
560 void disable_addr_trans(void);
561 void enable_addr_trans(void);
562 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
563 void ddr_enable_ecc(unsigned int dram_size);
564 #endif
565 #endif
566
567 /*
568  * Return the current value of a monotonically increasing microsecond timer.
569  * Granularity may be larger than 1us if hardware does not support this.
570  */
571 ulong timer_get_us(void);
572
573 /* $(CPU)/cpu.c */
574 static inline int cpumask_next(int cpu, unsigned int mask)
575 {
576         for (cpu++; !((1 << cpu) & mask); cpu++)
577                 ;
578
579         return cpu;
580 }
581
582 #define for_each_cpu(iter, cpu, num_cpus, mask) \
583         for (iter = 0, cpu = cpumask_next(-1, mask); \
584                 iter < num_cpus; \
585                 iter++, cpu = cpumask_next(cpu, mask)) \
586
587 int     cpu_numcores  (void);
588 int     cpu_num_dspcores(void);
589 u32     cpu_mask      (void);
590 u32     cpu_dsp_mask(void);
591 int     is_core_valid (unsigned int);
592 int     probecpu      (void);
593 int     checkcpu      (void);
594 int     checkicache   (void);
595 int     checkdcache   (void);
596 void    upmconfig     (unsigned int, unsigned int *, unsigned int);
597 ulong   get_tbclk     (void);
598 void    reset_misc    (void);
599 void    reset_cpu     (ulong addr);
600 void ft_cpu_setup(void *blob, bd_t *bd);
601 void ft_pci_setup(void *blob, bd_t *bd);
602
603 void smp_set_core_boot_addr(unsigned long addr, int corenr);
604 void smp_kick_all_cpus(void);
605
606 /* $(CPU)/serial.c */
607 int     serial_init   (void);
608 void    serial_setbrg (void);
609 void    serial_putc   (const char);
610 void    serial_putc_raw(const char);
611 void    serial_puts   (const char *);
612 int     serial_getc   (void);
613 int     serial_tstc   (void);
614
615 /* These versions take a stdio_dev pointer */
616 struct stdio_dev;
617 int serial_stub_getc(struct stdio_dev *sdev);
618 int serial_stub_tstc(struct stdio_dev *sdev);
619
620 /* $(CPU)/speed.c */
621 int     get_clocks (void);
622 int     get_clocks_866 (void);
623 int     sdram_adjust_866 (void);
624 int     adjust_sdram_tbs_8xx (void);
625 #if defined(CONFIG_MPC8260)
626 int     prt_8260_clks (void);
627 #elif defined(CONFIG_MPC5xxx)
628 int     prt_mpc5xxx_clks (void);
629 #endif
630 #ifdef CONFIG_4xx
631 ulong   get_OPB_freq (void);
632 ulong   get_PCI_freq (void);
633 #endif
634 #if defined(CONFIG_S3C24X0) || \
635     defined(CONFIG_LH7A40X) || \
636     defined(CONFIG_EP93XX)
637 ulong   get_FCLK (void);
638 ulong   get_HCLK (void);
639 ulong   get_PCLK (void);
640 ulong   get_UCLK (void);
641 #endif
642 #if defined(CONFIG_LH7A40X)
643 ulong   get_PLLCLK (void);
644 #endif
645 #if defined(CONFIG_IMX)
646 ulong get_systemPLLCLK(void);
647 ulong get_FCLK(void);
648 ulong get_HCLK(void);
649 ulong get_BCLK(void);
650 ulong get_PERCLK1(void);
651 ulong get_PERCLK2(void);
652 ulong get_PERCLK3(void);
653 #endif
654 ulong   get_bus_freq  (ulong);
655 int get_serial_clock(void);
656
657 #if defined(CONFIG_MPC85xx)
658 typedef MPC85xx_SYS_INFO sys_info_t;
659 void    get_sys_info  ( sys_info_t * );
660 void ft_fixup_cpu(void *, u64);
661 void ft_fixup_num_cores(void *);
662 #endif
663 #if defined(CONFIG_MPC86xx)
664 typedef MPC86xx_SYS_INFO sys_info_t;
665 void   get_sys_info  ( sys_info_t * );
666 static inline ulong get_ddr_freq(ulong dummy)
667 {
668         return get_bus_freq(dummy);
669 }
670 #else
671 ulong get_ddr_freq(ulong);
672 #endif
673
674 #if defined(CONFIG_4xx)
675 #  if defined(CONFIG_440)
676 #       if defined(CONFIG_440SPE)
677          unsigned long determine_sysper(void);
678          unsigned long determine_pci_clock_per(void);
679 #       endif
680 #  endif
681 typedef PPC4xx_SYS_INFO sys_info_t;
682 int     ppc440spe_revB(void);
683 void    get_sys_info  ( sys_info_t * );
684 #endif
685
686 /* $(CPU)/cpu_init.c */
687 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
688 void    cpu_init_f    (volatile immap_t *immr);
689 #endif
690 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
691 void    cpu_init_f    (void);
692 #endif
693 #ifdef CONFIG_MPC85xx
694 ulong cpu_init_f(void);
695 #endif
696
697 int     cpu_init_r    (void);
698 #if defined(CONFIG_MPC8260)
699 int     prt_8260_rsr  (void);
700 #elif defined(CONFIG_MPC83xx)
701 int     prt_83xx_rsr  (void);
702 #endif
703
704 /* $(CPU)/interrupts.c */
705 int     interrupt_init     (void);
706 void    timer_interrupt    (struct pt_regs *);
707 void    external_interrupt (struct pt_regs *);
708 void    irq_install_handler(int, interrupt_handler_t *, void *);
709 void    irq_free_handler   (int);
710 void    reset_timer        (void);
711 ulong   get_timer          (ulong base);
712
713 /* Return value of monotonic microsecond timer */
714 unsigned long timer_get_us(void);
715
716 void    enable_interrupts  (void);
717 int     disable_interrupts (void);
718
719 /* $(CPU)/.../commproc.c */
720 int     dpram_init (void);
721 uint    dpram_base(void);
722 uint    dpram_base_align(uint align);
723 uint    dpram_alloc(uint size);
724 uint    dpram_alloc_align(uint size,uint align);
725 void    bootcount_store (ulong);
726 ulong   bootcount_load (void);
727 #define BOOTCOUNT_MAGIC         0xB001C041
728
729 /* $(CPU)/.../<eth> */
730 void mii_init (void);
731
732 /* $(CPU)/.../lcd.c */
733 ulong   lcd_setmem (ulong);
734
735 /* $(CPU)/.../video.c */
736 ulong   video_setmem (ulong);
737
738 /* arch/$(ARCH)/lib/cache.c */
739 void    enable_caches(void);
740 void    flush_cache   (unsigned long, unsigned long);
741 void    flush_dcache_all(void);
742 void    flush_dcache_range(unsigned long start, unsigned long stop);
743 void    invalidate_dcache_range(unsigned long start, unsigned long stop);
744 void    invalidate_dcache_all(void);
745 void    invalidate_icache_all(void);
746
747 enum {
748         /* Disable caches (else flush caches but leave them active) */
749         CBL_DISABLE_CACHES              = 1 << 0,
750         CBL_SHOW_BOOTSTAGE_REPORT       = 1 << 1,
751
752         CBL_ALL                         = 3,
753 };
754
755 /**
756  * Clean up ready for linux
757  *
758  * @param flags         Flags to control what is done
759  */
760 int cleanup_before_linux_select(int flags);
761
762 /* arch/$(ARCH)/lib/ticks.S */
763 uint64_t get_ticks(void);
764 void    wait_ticks    (unsigned long);
765
766 /* arch/$(ARCH)/lib/time.c */
767 void    __udelay      (unsigned long);
768 ulong   usec2ticks    (unsigned long usec);
769 ulong   ticks2usec    (unsigned long ticks);
770 int     init_timebase (void);
771
772 /* lib/gunzip.c */
773 int gunzip(void *, int, unsigned char *, unsigned long *);
774 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
775                                                 int stoponerr, int offset);
776
777 /**
778  * gzwrite progress indicators: defined weak to allow board-specific
779  * overrides:
780  *
781  *      gzwrite_progress_init called on startup
782  *      gzwrite_progress called during decompress/write loop
783  *      gzwrite_progress_finish called at end of loop to
784  *              indicate success (retcode=0) or failure
785  */
786 void gzwrite_progress_init(u64 expected_size);
787
788 void gzwrite_progress(int iteration,
789                      u64 bytes_written,
790                      u64 total_bytes);
791
792 void gzwrite_progress_finish(int retcode,
793                              u64 totalwritten,
794                              u64 totalsize,
795                              u32 expected_crc,
796                              u32 calculated_crc);
797
798 /**
799  * decompress and write gzipped image from memory to block device
800  *
801  * @param       src             compressed image address
802  * @param       len             compressed image length in bytes
803  * @param       dev             block device descriptor
804  * @param       szwritebuf      bytes per write (pad to erase size)
805  * @param       startoffs       offset in bytes of first write
806  * @param       szexpected      expected uncompressed length
807  *                              may be zero to use gzip trailer
808  *                              for files under 4GiB
809  */
810 int gzwrite(unsigned char *src, int len,
811             struct blk_desc *dev,
812             unsigned long szwritebuf,
813             u64 startoffs,
814             u64 szexpected);
815
816 /* lib/lz4_wrapper.c */
817 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
818
819 /* lib/qsort.c */
820 void qsort(void *base, size_t nmemb, size_t size,
821            int(*compar)(const void *, const void *));
822 int strcmp_compar(const void *, const void *);
823
824 /* lib/time.c */
825 void    udelay        (unsigned long);
826 void mdelay(unsigned long);
827
828 /* lib/uuid.c */
829 #include <uuid.h>
830
831 /* lib/vsprintf.c */
832 #include <vsprintf.h>
833
834 /* lib/strmhz.c */
835 char *  strmhz(char *buf, unsigned long hz);
836
837 /* lib/crc32.c */
838 #include <u-boot/crc.h>
839
840 /* lib/rand.c */
841 #define RAND_MAX -1U
842 void srand(unsigned int seed);
843 unsigned int rand(void);
844 unsigned int rand_r(unsigned int *seedp);
845
846 /*
847  * STDIO based functions (can always be used)
848  */
849 /* serial stuff */
850 int     serial_printf (const char *fmt, ...)
851                 __attribute__ ((format (__printf__, 1, 2)));
852 /* stdin */
853 int     getc(void);
854 int     tstc(void);
855
856 /* stdout */
857 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
858 #define putc(...) do { } while (0)
859 #define puts(...) do { } while (0)
860 #define printf(...) do { } while (0)
861 #define vprintf(...) do { } while (0)
862 #else
863 void    putc(const char c);
864 void    puts(const char *s);
865 int     printf(const char *fmt, ...)
866                 __attribute__ ((format (__printf__, 1, 2)));
867 int     vprintf(const char *fmt, va_list args);
868 #endif
869
870 /* stderr */
871 #define eputc(c)                fputc(stderr, c)
872 #define eputs(s)                fputs(stderr, s)
873 #define eprintf(fmt,args...)    fprintf(stderr,fmt ,##args)
874
875 /*
876  * FILE based functions (can only be used AFTER relocation!)
877  */
878 #define stdin           0
879 #define stdout          1
880 #define stderr          2
881 #define MAX_FILES       3
882
883 int     fprintf(int file, const char *fmt, ...)
884                 __attribute__ ((format (__printf__, 2, 3)));
885 void    fputs(int file, const char *s);
886 void    fputc(int file, const char c);
887 int     ftstc(int file);
888 int     fgetc(int file);
889
890 /* lib/gzip.c */
891 int gzip(void *dst, unsigned long *lenp,
892                 unsigned char *src, unsigned long srclen);
893 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
894                 unsigned long srclen, int stoponerr,
895                 int (*func)(unsigned long, unsigned long));
896
897 /* lib/net_utils.c */
898 #include <net.h>
899 static inline struct in_addr getenv_ip(char *var)
900 {
901         return string_to_ip(getenv(var));
902 }
903
904 int     pcmcia_init (void);
905
906 #ifdef CONFIG_STATUS_LED
907 # include <status_led.h>
908 #endif
909
910 #include <bootstage.h>
911
912 #ifdef CONFIG_SHOW_ACTIVITY
913 void show_activity(int arg);
914 #endif
915
916 /* Multicore arch functions */
917 #ifdef CONFIG_MP
918 int cpu_status(int nr);
919 int cpu_reset(int nr);
920 int cpu_disable(int nr);
921 int cpu_release(int nr, int argc, char * const argv[]);
922 #endif
923
924 #endif /* __ASSEMBLY__ */
925
926 #ifdef CONFIG_PPC
927 /*
928  * Has to be included outside of the #ifndef __ASSEMBLY__ section.
929  * Otherwise might lead to compilation errors in assembler files.
930  */
931 #include <asm/cache.h>
932 #endif
933
934 /* Put only stuff here that the assembler can digest */
935
936 #ifdef CONFIG_POST
937 #define CONFIG_HAS_POST
938 #ifndef CONFIG_POST_ALT_LIST
939 #define CONFIG_POST_STD_LIST
940 #endif
941 #endif
942
943 #ifdef CONFIG_INIT_CRITICAL
944 #error CONFIG_INIT_CRITICAL is deprecated!
945 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
946 #endif
947
948 #define ROUND(a,b)              (((a) + (b) - 1) & ~((b) - 1))
949
950 /*
951  * check_member() - Check the offset of a structure member
952  *
953  * @structure:  Name of structure (e.g. global_data)
954  * @member:     Name of member (e.g. baudrate)
955  * @offset:     Expected offset in bytes
956  */
957 #define check_member(structure, member, offset) _Static_assert( \
958         offsetof(struct structure, member) == offset, \
959         "`struct " #structure "` offset for `" #member "` is not " #offset)
960
961 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
962 #ifdef CONFIG_EFI_STUB
963 #define ll_boot_init()  false
964 #else
965 #define ll_boot_init()  true
966 #endif
967
968 /* Pull in stuff for the build system */
969 #ifdef DO_DEPS_ONLY
970 # include <environment.h>
971 #endif
972
973 #endif  /* __COMMON_H_ */