2 * (C) Copyright 2001, 2002
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
32 /* ----- LWMON ---------------------------------------------------------
34 #if defined(CONFIG_LWMON)
36 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
37 "pic", 3, 4, 1, do_pic, \
38 "pic - read and write PIC registers\n", \
39 "read reg - read PIC register `reg'\n" \
40 "pic write reg val - write value `val' to PIC register `reg'\n" \
41 ), MK_CMD_TBL_ENTRY( \
42 "kbd", 3, 1, 1, do_kbd, \
43 "kbd - read keyboard status\n", \
45 ), MK_CMD_TBL_ENTRY( \
46 "lsb", 3, 2, 1, do_lsb, \
47 "lsb - check and set LSB switch\n", \
48 "on - switch LSB on\n" \
49 "lsb off - switch LSB off\n" \
50 "lsb - print current setting\n" \
52 int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
53 int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
54 int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
56 #endif /* CONFIG_LWMON */
57 /* -------------------------------------------------------------------- */
59 /* ----- PCU E -------------------------------------------------------- */
60 #if defined(CONFIG_PCU_E)
62 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
63 "puma", 4, 4, 1, do_puma, \
64 "puma - access PUMA FPGA\n", \
65 "status - print PUMA status\n" \
66 "puma load addr len - load PUMA configuration data\n" \
68 int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
70 #endif /* CONFIG_PCU_E */
71 /* -------------------------------------------------------------------- */
73 /* ----- CCM/SCM ------------------------------------------------------ */
74 #if defined(CONFIG_CCM) || defined(CONFIG_SCM)
76 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
77 "fpga", 4, 4, 1, do_fpga, \
78 "fpga - access FPGA(s)\n", \
79 "fpga status [name] - print FPGA status\n" \
80 "fpga reset [name] - reset FPGA\n" \
81 "fpga load [name] addr - load FPGA configuration data\n" \
83 int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
85 #endif /* CONFIG_CCM, CONFIG_SCM */
86 /* -------------------------------------------------------------------- */
88 /* ----- PIP405 ------------------------------------------------------- */
89 #if defined(CONFIG_PIP405)
91 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
92 "pip405", 4, 6, 1, do_pip405, \
93 "pip405 - PIP405 specific Cmds\n", \
94 "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
95 "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \
96 "pip405 flash mps - updates U-Boot with image from MPS\n" \
98 int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
100 #endif /* CONFIG_PIP405 */
101 /* -------------------------------------------------------------------- */
103 /* ----- MIP405 ------------------------------------------------------- */
104 #if defined(CONFIG_MIP405)
106 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
107 "mip405", 4, 6, 1, do_mip405, \
108 "mip405 - MIP405 specific Cmds\n", \
109 "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
110 "mip405 flash mps - updates U-Boot with image from MPS\n" \
112 int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
114 #endif /* CONFIG_MIP405 */
115 /* ----- VCMA9 -----------------------------------------------------------------
117 #if defined(CONFIG_VCMA9)
119 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
120 "vcma9", 4, 6, 1, do_vcma9, \
121 "vcma9 - VCMA9 specific Cmds\n", \
122 "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \
124 int do_vcma9 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
126 #endif /* CONFIG_VCMA9 */
127 /* ----------------------------------------------------------------------------*/
129 /* ----- DASA_SIM ----------------------------------------------------- */
130 #if defined(CONFIG_DASA_SIM)
132 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
133 "pci9054", 7, 3, 1, do_pci9054, \
134 "pci9054 - PLX PCI9054 EEPROM access\n", \
135 "pci9054 info - print EEPROM values\n" \
136 "pci9054 update - updates EEPROM with default values\n" \
138 int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
140 #endif /* CONFIG_DASA_SIM */
141 /* -------------------------------------------------------------------- */
143 /* ----- HYMOD -------------------------------------------------------- */
144 #if defined(CONFIG_HYMOD)
146 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
147 "fpga", 4, 6, 1, do_fpga, \
148 "fpga - FPGA sub-system\n", \
149 "load [type] addr size\n" \
150 " - write the configuration data at memory address `addr',\n" \
151 " size `size' bytes, into the FPGA of type `type' (either\n" \
152 " `main' or `mezz', default `main'). e.g.\n" \
153 " `fpga load 100000 7d8f'\n" \
154 " loads the main FPGA with config data at address 100000\n" \
155 " HEX, size 7d8f HEX (32143 DEC) bytes\n" \
156 "fpga tftp file addr\n" \
157 " - transfers `file' from the tftp server into memory at\n" \
158 " address `addr', then writes the entire file contents\n" \
159 " into the main FPGA\n" \
160 "fpga store addr\n" \
161 " - read configuration data from the main FPGA (the mezz\n" \
162 " FPGA is write-only), into address `addr'. There must be\n" \
163 " enough memory available at `addr' to hold all the config\n"\
164 " data - the size of which is determined by VC:???\n" \
166 " - print information about the Hymod FPGA, namely the\n" \
167 " memory addresses at which the four FPGA local bus\n" \
168 " address spaces appear in the physical address space\n" \
169 ), MK_CMD_TBL_ENTRY( \
170 "eeclear", 4, 1, 0, do_eecl, \
171 "eeclear - Clear the eeprom on a Hymod board\n", \
173 " - write zeroes into the EEPROM on the board of type `type'\n"\
174 " (`type' is either `main' or `mezz' - default `main')\n" \
175 " Note: the EEPROM write enable jumper must be installed\n" \
176 ), MK_CMD_TBL_ENTRY( \
177 "htest", 5, 1, 0, do_htest, \
178 "htest - run HYMOD tests\n", \
182 int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
183 int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
184 int do_htest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
186 #endif /* CONFIG_HYMOD */
187 /* -------------------------------------------------------------------- */
189 /* ----- CRAY405 (L1) ------------------------------------------------- */
190 #if defined (CONFIG_CRAYL1)
191 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
192 "L1cmd", 5, 4, 1, do_crayL1, \
193 "L1cmd - L1 update, setup, commands \n", \
194 "L1cmd update - update flash images from host\n" \
195 "L1cmd boot - nfs or ramboot L1\n" \
197 int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
198 #endif /* CONFIG_CRAY405 */
199 /* -------------------------------------------------------------------- */
201 /* ----- EVB64260 ----------------------------------------------------- */
202 #if defined (CONFIG_EVB64260)
203 #ifdef CONFIG_ZUMA_V2
204 #define CMD_TBL_BSP ZUMA_TBL_ENTRY
206 #define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \
207 "zinit", 5, 1, 0, do_zuma_init_pbb, \
208 "zinit - init zuma pbb\n", \
210 " - init zuma pbb\n" \
211 ), MK_CMD_TBL_ENTRY( \
212 "zdtest", 6, 3, 1, do_zuma_test_dma, \
213 "zdtest - run dma test\n", \
215 " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
216 ), MK_CMD_TBL_ENTRY( \
217 "zminit", 5, 1, 0, do_zuma_init_mbox, \
218 "zminit - init zuma mbox\n", \
220 " - init zuma mbox\n" \
223 int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
224 int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
225 int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
227 void zuma_init_pbb(void);
228 int zuma_mbox_init(void);
229 int zuma_test_dma(int cmd, int size);
232 #endif /* ZUMA_NTL */
234 #endif /* CONFIG_EVB64260 */
235 /* -------------------------------------------------------------------- */
237 /* -----W7O------------------------------------------------------------ */
238 #if defined(CONFIG_W7O)
240 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
241 "vpd", 3, 2, 1, do_vpd, \
242 "vpd - Read Vital Product Data\n", \
244 " - Read VPD Data from default address, or device address 'dev_addr'.\n" \
247 extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
249 #endif /* CONFIG_W7O */
250 /* -------------------------------------------------------------------- */
252 /* ---- PCIPPC2 / PCIPPC6 --------------------------------------------- */
253 #if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
254 #if defined(CONFIG_WATCHDOG)
256 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
257 "wd", 3, 2, 1, do_wd, \
258 "wd - check and set watchdog\n", \
259 "on - switch watchDog on\n" \
260 "wd off - switch watchdog off\n" \
261 "wd - print current status\n" \
264 extern int do_wd (cmd_tbl_t *, int, int, char *[]);
268 #endif /* CONFIG_WATCHDOG */
270 #endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
271 /* -------------------------------------------------------------------- */
273 /* ----- PN62 --------------------------------------------------------- */
274 #if defined(CONFIG_PN62)
276 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
277 "loadpci", 5, 2, 1, do_loadpci, \
278 "loadpci - load binary file over PCI\n", \
280 " - load binary file over PCI to address 'addr'\n" \
281 ), MK_CMD_TBL_ENTRY( \
282 "led" , 3, 3, 1, do_led, \
283 "led - set LED 0..11 on the PN62 board\n", \
285 " - set 'i'th LED to function 'fun'\n" \
288 extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
289 extern int do_led (cmd_tbl_t *, int, int, char *[]);
290 #endif /* CONFIG_PN62 */
291 /* -------------------------------------------------------------------- */
293 /* ----- TRAB --------------------------------------------------------- */
294 #if defined(CONFIG_TRAB)
296 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
297 "kbd", 3, 1, 1, do_kbd, \
298 "kbd - read keyboard status\n", \
302 int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
304 #endif /* CONFIG_TRAB */
305 /* -------------------------------------------------------------------- */
307 /* ----- R360MPI ------------------------------------------------------ */
308 #if defined(CONFIG_R360MPI)
310 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
311 "kbd", 3, 1, 1, do_kbd, \
312 "kbd - read keyboard status\n", \
316 int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
318 #endif /* CONFIG_R360MPI */
319 /* -------------------------------------------------------------------- */
321 /* ------ AMIGAONEG3SE ------------------------------------------------ */
322 #if defined(CONFIG_AMIGAONEG3SE)
324 #define CMD_TBL_BSP /* dummy */
326 #endif /* AmigaOneG3SE */
327 /* ----- PCI405 ------------------------------------------------------- */
328 #if defined(CONFIG_PCI405)
330 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \
331 "loadpci", 7, 1, 1, do_loadpci, \
332 "loadpci - wait for sync and boot image\n", \
336 int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
338 #endif /* CONFIG_PCI405 */
339 /* -------------------------------------------------------------------- */
343 #endif /* CFG_CMD_BSP */
345 #endif /* _CMD_BSP_H_ */