spi: add spi-mem driver for MediaTek MT7629 SoC
[oweals/u-boot.git] / drivers / w1-eeprom / ds2502.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Driver for DS-2502 One wire "Add only Memory".
4  *
5  * The chip has 4 pages of 32 bytes.
6  * In addition it has 8 out of band status bytes that are used, by software,
7  * as page redirection bytes by an algorithm described in the data sheet.
8  * This is useful since data cannot be erased once written but it can be
9  * "patched" up to four times by switching pages.
10  *
11  * So, when a read request is entirely in the first page automatically
12  * apply the page redirection bytes (which allows the device to be seen as
13  * a 32 byte PROM, writable 4 times).
14  *
15  * If the read request is outside of or larger than the first page then read
16  * the raw data (which allows the device to be seen as a 128 byte PROM,
17  * writable once).
18  *
19  * Copyright (c) 2018 Flowbird
20  * Martin Fuzzey <martin.fuzzey@flowbird.group>
21  */
22
23 #include <common.h>
24 #include <dm.h>
25 #include <linux/err.h>
26 #include <w1-eeprom.h>
27 #include <w1.h>
28
29 #define DS2502_PAGE_SIZE        32
30 #define DS2502_PAGE_COUNT       4
31 #define DS2502_STATUS_SIZE      8
32
33 #define DS2502_CMD_READ_STATUS  0xAA
34 #define DS2502_CMD_READ_GEN_CRC 0xC3
35
36 /* u-boot crc8() is CCITT CRC8, we need x^8 + x^5 + x^4 + 1 LSB first */
37 static unsigned int ds2502_crc8(const u8 *buf, int len)
38 {
39         static const u8 poly = 0x8C;  /* (1 + x^4 + x^5) + x^8 */
40         u8 crc = 0;
41         int i;
42
43         for (i = 0; i < len; i++) {
44                 u8 data = buf[i];
45                 int j;
46
47                 for (j = 0; j < 8; j++) {
48                         u8 mix = (crc ^ data) & 1;
49
50                         crc >>= 1;
51                         if (mix)
52                                 crc ^= poly;
53                         data >>= 1;
54                 }
55         }
56         return crc;
57 }
58
59 static int ds2502_read(struct udevice *dev, u8 cmd,
60                        int bytes_in_page, int pos,
61                        u8 *buf, int bytes_for_user)
62 {
63         int retry;
64         int ret = 0;
65
66         for (retry = 0; retry < 3; retry++) {
67                 u8 pagebuf[DS2502_PAGE_SIZE + 1]; /* 1 byte for CRC8 */
68                 u8 crc;
69                 int i;
70
71                 ret = w1_reset_select(dev);
72                 if (ret)
73                         return ret;
74
75                 /* send read to end of page and generate CRC command */
76                 pagebuf[0] = cmd;
77                 pagebuf[1] = pos & 0xff;
78                 pagebuf[2] = pos >> 8;
79                 crc = ds2502_crc8(pagebuf, 3);
80                 for (i = 0; i < 3; i++)
81                         w1_write_byte(dev, pagebuf[i]);
82
83                 /* Check command CRC */
84                 ret = w1_read_byte(dev);
85                 if (ret < 0) {
86                         dev_dbg(dev, "Error %d reading command CRC\n", ret);
87                         continue;
88                 }
89
90                 if (ret != crc) {
91                         dev_dbg(dev,
92                                 "bad CRC8 for cmd %02x got=%02X exp=%02X\n",
93                                 cmd, ret, crc);
94                         ret = -EIO;
95                         continue;
96                 }
97
98                 /* read data and check CRC */
99                 ret = w1_read_buf(dev, pagebuf, bytes_in_page + 1);
100                 if (ret < 0) {
101                         dev_dbg(dev, "Error %d reading data\n", ret);
102                         continue;
103                 }
104
105                 crc = ds2502_crc8(pagebuf, bytes_in_page);
106                 if (crc == pagebuf[bytes_in_page]) {
107                         memcpy(buf, pagebuf, bytes_for_user);
108                         ret = 0;
109                         break;
110                 }
111                 dev_dbg(dev, "Bad CRC8 got=%02X exp=%02X pos=%04X\n",
112                         pagebuf[bytes_in_page], crc, pos);
113                 ret = -EIO;
114         }
115
116         return ret;
117 }
118
119 static inline int ds2502_read_status_bytes(struct udevice *dev, u8 *buf)
120 {
121         return ds2502_read(dev, DS2502_CMD_READ_STATUS,
122                                 DS2502_STATUS_SIZE, 0,
123                                 buf, DS2502_STATUS_SIZE);
124 }
125
126 /*
127  * Status bytes (from index 1) contain 1's complement page indirection
128  * So for N writes:
129  * N=1: ff ff ff ff ff ff ff 00
130  * N=2: ff fe ff ff ff ff ff 00
131  * N=3: ff fe fd ff ff ff ff 00
132  * N=4: ff fe fd fc ff ff ff 00
133  */
134 static int ds2502_indirect_page(struct udevice *dev, u8 *status, int page)
135 {
136         int page_seen = 0;
137
138         do {
139                 u8 sb = status[page + 1];
140
141                 if (sb == 0xff)
142                         break;
143
144                 page = ~sb & 0xff;
145
146                 if (page >= DS2502_PAGE_COUNT) {
147                         dev_err(dev,
148                                 "Illegal page redirection status byte %02x\n",
149                                 sb);
150                         return -EINVAL;
151                 }
152
153                 if (page_seen & (1 << page)) {
154                         dev_err(dev, "Infinite loop in page redirection\n");
155                         return -EINVAL;
156                 }
157
158                 page_seen |= (1 << page);
159         } while (1);
160
161         return page;
162 }
163
164 static int ds2502_read_buf(struct udevice *dev, unsigned int offset,
165                            u8 *buf, unsigned int count)
166 {
167         unsigned int min_page = offset / DS2502_PAGE_SIZE;
168         unsigned int max_page = (offset + count - 1) / DS2502_PAGE_SIZE;
169         int xfered = 0;
170         u8 status_bytes[DS2502_STATUS_SIZE];
171         int i;
172         int ret;
173
174         if (min_page >= DS2502_PAGE_COUNT || max_page >= DS2502_PAGE_COUNT)
175                 return -EINVAL;
176
177         if (min_page == 0 && max_page == 0) {
178                 ret = ds2502_read_status_bytes(dev, status_bytes);
179                 if (ret)
180                         return ret;
181         } else {
182                 /* Dummy one to one page redirection */
183                 memset(status_bytes, 0xff, sizeof(status_bytes));
184         }
185
186         for (i = min_page; i <= max_page; i++) {
187                 int page;
188                 int pos;
189                 int bytes_in_page;
190                 int bytes_for_user;
191
192                 page = ds2502_indirect_page(dev, status_bytes, i);
193                 if (page < 0)
194                         return page;
195                 dev_dbg(dev, "page logical %d => physical %d\n", i, page);
196
197                 pos = page * DS2502_PAGE_SIZE;
198                 if (i == min_page)
199                         pos += offset % DS2502_PAGE_SIZE;
200
201                 bytes_in_page = DS2502_PAGE_SIZE - (pos % DS2502_PAGE_SIZE);
202
203                 if (i == max_page)
204                         bytes_for_user = count - xfered;
205                 else
206                         bytes_for_user = bytes_in_page;
207
208                 ret = ds2502_read(dev, DS2502_CMD_READ_GEN_CRC,
209                                   bytes_in_page, pos,
210                                   &buf[xfered], bytes_for_user);
211                 if (ret < 0)
212                         return ret;
213
214                 xfered += bytes_for_user;
215         }
216
217         return 0;
218 }
219
220 static int ds2502_probe(struct udevice *dev)
221 {
222         struct w1_device *w1;
223
224         w1 = dev_get_parent_platdata(dev);
225         w1->id = 0;
226         return 0;
227 }
228
229 static const struct w1_eeprom_ops ds2502_ops = {
230         .read_buf       = ds2502_read_buf,
231 };
232
233 static const struct udevice_id ds2502_id[] = {
234         { .compatible = "maxim,ds2502", .data = W1_FAMILY_DS2502 },
235         { },
236 };
237
238 U_BOOT_DRIVER(ds2502) = {
239         .name           = "ds2502",
240         .id             = UCLASS_W1_EEPROM,
241         .of_match       = ds2502_id,
242         .ops            = &ds2502_ops,
243         .probe          = ds2502_probe,
244 };