video: stm32: stm32_ltdc: missing set of line interrupt position
[oweals/u-boot.git] / drivers / video / stm32 / stm32_ltdc.c
1 /*
2  * Copyright (C) 2017-2018 STMicroelectronics - All Rights Reserved
3  * Author(s): Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
4  *            Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
5  *
6  * SPDX-License-Identifier: GPL-2.0+
7  */
8
9 #include <common.h>
10 #include <clk.h>
11 #include <dm.h>
12 #include <panel.h>
13 #include <reset.h>
14 #include <video.h>
15 #include <asm/io.h>
16 #include <asm/arch/gpio.h>
17 #include <dm/device-internal.h>
18
19 DECLARE_GLOBAL_DATA_PTR;
20
21 struct stm32_ltdc_priv {
22         void __iomem *regs;
23         struct display_timing timing;
24         enum video_log2_bpp l2bpp;
25         u32 bg_col_argb;
26         u32 crop_x, crop_y, crop_w, crop_h;
27         u32 alpha;
28 };
29
30 /* LTDC main registers */
31 #define LTDC_IDR        0x00    /* IDentification */
32 #define LTDC_LCR        0x04    /* Layer Count */
33 #define LTDC_SSCR       0x08    /* Synchronization Size Configuration */
34 #define LTDC_BPCR       0x0C    /* Back Porch Configuration */
35 #define LTDC_AWCR       0x10    /* Active Width Configuration */
36 #define LTDC_TWCR       0x14    /* Total Width Configuration */
37 #define LTDC_GCR        0x18    /* Global Control */
38 #define LTDC_GC1R       0x1C    /* Global Configuration 1 */
39 #define LTDC_GC2R       0x20    /* Global Configuration 2 */
40 #define LTDC_SRCR       0x24    /* Shadow Reload Configuration */
41 #define LTDC_GACR       0x28    /* GAmma Correction */
42 #define LTDC_BCCR       0x2C    /* Background Color Configuration */
43 #define LTDC_IER        0x34    /* Interrupt Enable */
44 #define LTDC_ISR        0x38    /* Interrupt Status */
45 #define LTDC_ICR        0x3C    /* Interrupt Clear */
46 #define LTDC_LIPCR      0x40    /* Line Interrupt Position Conf. */
47 #define LTDC_CPSR       0x44    /* Current Position Status */
48 #define LTDC_CDSR       0x48    /* Current Display Status */
49
50 /* LTDC layer 1 registers */
51 #define LTDC_L1LC1R     0x80    /* L1 Layer Configuration 1 */
52 #define LTDC_L1LC2R     0x84    /* L1 Layer Configuration 2 */
53 #define LTDC_L1CR       0x84    /* L1 Control */
54 #define LTDC_L1WHPCR    0x88    /* L1 Window Hor Position Config */
55 #define LTDC_L1WVPCR    0x8C    /* L1 Window Vert Position Config */
56 #define LTDC_L1CKCR     0x90    /* L1 Color Keying Configuration */
57 #define LTDC_L1PFCR     0x94    /* L1 Pixel Format Configuration */
58 #define LTDC_L1CACR     0x98    /* L1 Constant Alpha Config */
59 #define LTDC_L1DCCR     0x9C    /* L1 Default Color Configuration */
60 #define LTDC_L1BFCR     0xA0    /* L1 Blend Factors Configuration */
61 #define LTDC_L1FBBCR    0xA4    /* L1 FrameBuffer Bus Control */
62 #define LTDC_L1AFBCR    0xA8    /* L1 AuxFB Control */
63 #define LTDC_L1CFBAR    0xAC    /* L1 Color FrameBuffer Address */
64 #define LTDC_L1CFBLR    0xB0    /* L1 Color FrameBuffer Length */
65 #define LTDC_L1CFBLNR   0xB4    /* L1 Color FrameBuffer Line Nb */
66 #define LTDC_L1AFBAR    0xB8    /* L1 AuxFB Address */
67 #define LTDC_L1AFBLR    0xBC    /* L1 AuxFB Length */
68 #define LTDC_L1AFBLNR   0xC0    /* L1 AuxFB Line Number */
69 #define LTDC_L1CLUTWR   0xC4    /* L1 CLUT Write */
70
71 /* Bit definitions */
72 #define SSCR_VSH        GENMASK(10, 0)  /* Vertical Synchronization Height */
73 #define SSCR_HSW        GENMASK(27, 16) /* Horizontal Synchronization Width */
74
75 #define BPCR_AVBP       GENMASK(10, 0)  /* Accumulated Vertical Back Porch */
76 #define BPCR_AHBP       GENMASK(27, 16) /* Accumulated Horizontal Back Porch */
77
78 #define AWCR_AAH        GENMASK(10, 0)  /* Accumulated Active Height */
79 #define AWCR_AAW        GENMASK(27, 16) /* Accumulated Active Width */
80
81 #define TWCR_TOTALH     GENMASK(10, 0)  /* TOTAL Height */
82 #define TWCR_TOTALW     GENMASK(27, 16) /* TOTAL Width */
83
84 #define GCR_LTDCEN      BIT(0)          /* LTDC ENable */
85 #define GCR_DEN         BIT(16)         /* Dither ENable */
86 #define GCR_PCPOL       BIT(28)         /* Pixel Clock POLarity-Inverted */
87 #define GCR_DEPOL       BIT(29)         /* Data Enable POLarity-High */
88 #define GCR_VSPOL       BIT(30)         /* Vertical Synchro POLarity-High */
89 #define GCR_HSPOL       BIT(31)         /* Horizontal Synchro POLarity-High */
90
91 #define GC1R_WBCH       GENMASK(3, 0)   /* Width of Blue CHannel output */
92 #define GC1R_WGCH       GENMASK(7, 4)   /* Width of Green Channel output */
93 #define GC1R_WRCH       GENMASK(11, 8)  /* Width of Red Channel output */
94 #define GC1R_PBEN       BIT(12)         /* Precise Blending ENable */
95 #define GC1R_DT         GENMASK(15, 14) /* Dithering Technique */
96 #define GC1R_GCT        GENMASK(19, 17) /* Gamma Correction Technique */
97 #define GC1R_SHREN      BIT(21)         /* SHadow Registers ENabled */
98 #define GC1R_BCP        BIT(22)         /* Background Colour Programmable */
99 #define GC1R_BBEN       BIT(23)         /* Background Blending ENabled */
100 #define GC1R_LNIP       BIT(24)         /* Line Number IRQ Position */
101 #define GC1R_TP         BIT(25)         /* Timing Programmable */
102 #define GC1R_IPP        BIT(26)         /* IRQ Polarity Programmable */
103 #define GC1R_SPP        BIT(27)         /* Sync Polarity Programmable */
104 #define GC1R_DWP        BIT(28)         /* Dither Width Programmable */
105 #define GC1R_STREN      BIT(29)         /* STatus Registers ENabled */
106 #define GC1R_BMEN       BIT(31)         /* Blind Mode ENabled */
107
108 #define GC2R_EDCA       BIT(0)          /* External Display Control Ability  */
109 #define GC2R_STSAEN     BIT(1)          /* Slave Timing Sync Ability ENabled */
110 #define GC2R_DVAEN      BIT(2)          /* Dual-View Ability ENabled */
111 #define GC2R_DPAEN      BIT(3)          /* Dual-Port Ability ENabled */
112 #define GC2R_BW         GENMASK(6, 4)   /* Bus Width (log2 of nb of bytes) */
113 #define GC2R_EDCEN      BIT(7)          /* External Display Control ENabled */
114
115 #define SRCR_IMR        BIT(0)          /* IMmediate Reload */
116 #define SRCR_VBR        BIT(1)          /* Vertical Blanking Reload */
117
118 #define LXCR_LEN        BIT(0)          /* Layer ENable */
119 #define LXCR_COLKEN     BIT(1)          /* Color Keying Enable */
120 #define LXCR_CLUTEN     BIT(4)          /* Color Look-Up Table ENable */
121
122 #define LXWHPCR_WHSTPOS GENMASK(11, 0)  /* Window Horizontal StarT POSition */
123 #define LXWHPCR_WHSPPOS GENMASK(27, 16) /* Window Horizontal StoP POSition */
124
125 #define LXWVPCR_WVSTPOS GENMASK(10, 0)  /* Window Vertical StarT POSition */
126 #define LXWVPCR_WVSPPOS GENMASK(26, 16) /* Window Vertical StoP POSition */
127
128 #define LXPFCR_PF       GENMASK(2, 0)   /* Pixel Format */
129
130 #define LXCACR_CONSTA   GENMASK(7, 0)   /* CONSTant Alpha */
131
132 #define LXBFCR_BF2      GENMASK(2, 0)   /* Blending Factor 2 */
133 #define LXBFCR_BF1      GENMASK(10, 8)  /* Blending Factor 1 */
134
135 #define LXCFBLR_CFBLL   GENMASK(12, 0)  /* Color Frame Buffer Line Length */
136 #define LXCFBLR_CFBP    GENMASK(28, 16) /* Color Frame Buffer Pitch in bytes */
137
138 #define LXCFBLNR_CFBLN  GENMASK(10, 0)  /* Color Frame Buffer Line Number */
139
140 #define BF1_PAXCA       0x600           /* Pixel Alpha x Constant Alpha */
141 #define BF2_1PAXCA      0x007           /* 1 - (Pixel Alpha x Constant Alpha) */
142
143 enum stm32_ltdc_pix_fmt {
144         PF_ARGB8888 = 0,
145         PF_RGB888,
146         PF_RGB565,
147         PF_ARGB1555,
148         PF_ARGB4444,
149         PF_L8,
150         PF_AL44,
151         PF_AL88
152 };
153
154 /* TODO add more color format support */
155 static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp)
156 {
157         enum stm32_ltdc_pix_fmt pf;
158
159         switch (l2bpp) {
160         case VIDEO_BPP16:
161                 pf = PF_RGB565;
162                 break;
163
164         case VIDEO_BPP1:
165         case VIDEO_BPP2:
166         case VIDEO_BPP4:
167         case VIDEO_BPP8:
168         case VIDEO_BPP32:
169         default:
170                 debug("%s: warning %dbpp not supported yet, %dbpp instead\n",
171                       __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
172                 pf = PF_RGB565;
173                 break;
174         }
175
176         debug("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf);
177
178         return (u32)pf;
179 }
180
181 static void stm32_ltdc_enable(struct stm32_ltdc_priv *priv)
182 {
183         /* Reload configuration immediately & enable LTDC */
184         setbits_le32(priv->regs + LTDC_SRCR, SRCR_IMR);
185         setbits_le32(priv->regs + LTDC_GCR, GCR_LTDCEN);
186 }
187
188 static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
189 {
190         void __iomem *regs = priv->regs;
191         struct display_timing *timing = &priv->timing;
192         u32 hsync, vsync, acc_hbp, acc_vbp, acc_act_w, acc_act_h;
193         u32 total_w, total_h;
194         u32 val;
195
196         /* Convert video timings to ltdc timings */
197         hsync = timing->hsync_len.typ - 1;
198         vsync = timing->vsync_len.typ - 1;
199         acc_hbp = hsync + timing->hback_porch.typ;
200         acc_vbp = vsync + timing->vback_porch.typ;
201         acc_act_w = acc_hbp + timing->hactive.typ;
202         acc_act_h = acc_vbp + timing->vactive.typ;
203         total_w = acc_act_w + timing->hfront_porch.typ;
204         total_h = acc_act_h + timing->vfront_porch.typ;
205
206         /* Synchronization sizes */
207         val = (hsync << 16) | vsync;
208         clrsetbits_le32(regs + LTDC_SSCR, SSCR_VSH | SSCR_HSW, val);
209
210         /* Accumulated back porch */
211         val = (acc_hbp << 16) | acc_vbp;
212         clrsetbits_le32(regs + LTDC_BPCR, BPCR_AVBP | BPCR_AHBP, val);
213
214         /* Accumulated active width */
215         val = (acc_act_w << 16) | acc_act_h;
216         clrsetbits_le32(regs + LTDC_AWCR, AWCR_AAW | AWCR_AAH, val);
217
218         /* Total width & height */
219         val = (total_w << 16) | total_h;
220         clrsetbits_le32(regs + LTDC_TWCR, TWCR_TOTALH | TWCR_TOTALW, val);
221
222         setbits_le32(regs + LTDC_LIPCR, acc_act_h + 1);
223
224         /* Signal polarities */
225         val = 0;
226         debug("%s: timing->flags 0x%08x\n", __func__, timing->flags);
227         if (timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)
228                 val |= GCR_HSPOL;
229         if (timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)
230                 val |= GCR_VSPOL;
231         if (timing->flags & DISPLAY_FLAGS_DE_HIGH)
232                 val |= GCR_DEPOL;
233         if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
234                 val |= GCR_PCPOL;
235         clrsetbits_le32(regs + LTDC_GCR,
236                         GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
237
238         /* Overall background color */
239         writel(priv->bg_col_argb, priv->regs + LTDC_BCCR);
240 }
241
242 static void stm32_ltdc_set_layer1(struct stm32_ltdc_priv *priv, ulong fb_addr)
243 {
244         void __iomem *regs = priv->regs;
245         u32 x0, x1, y0, y1;
246         u32 pitch_in_bytes;
247         u32 line_length;
248         u32 bus_width;
249         u32 val, tmp, bpp;
250
251         x0 = priv->crop_x;
252         x1 = priv->crop_x + priv->crop_w - 1;
253         y0 = priv->crop_y;
254         y1 = priv->crop_y + priv->crop_h - 1;
255
256         /* Horizontal start and stop position */
257         tmp = (readl(regs + LTDC_BPCR) & BPCR_AHBP) >> 16;
258         val = ((x1 + 1 + tmp) << 16) + (x0 + 1 + tmp);
259         clrsetbits_le32(regs + LTDC_L1WHPCR, LXWHPCR_WHSTPOS | LXWHPCR_WHSPPOS,
260                         val);
261
262         /* Vertical start & stop position */
263         tmp = readl(regs + LTDC_BPCR) & BPCR_AVBP;
264         val = ((y1 + 1 + tmp) << 16) + (y0 + 1 + tmp);
265         clrsetbits_le32(regs + LTDC_L1WVPCR, LXWVPCR_WVSTPOS | LXWVPCR_WVSPPOS,
266                         val);
267
268         /* Layer background color */
269         writel(priv->bg_col_argb, regs + LTDC_L1DCCR);
270
271         /* Color frame buffer pitch in bytes & line length */
272         bpp = VNBITS(priv->l2bpp);
273         pitch_in_bytes = priv->crop_w * (bpp >> 3);
274         bus_width = 8 << ((readl(regs + LTDC_GC2R) & GC2R_BW) >> 4);
275         line_length = ((bpp >> 3) * priv->crop_w) + (bus_width >> 3) - 1;
276         val = (pitch_in_bytes << 16) | line_length;
277         clrsetbits_le32(regs + LTDC_L1CFBLR, LXCFBLR_CFBLL | LXCFBLR_CFBP, val);
278
279         /* Pixel format */
280         val = stm32_ltdc_get_pixel_format(priv->l2bpp);
281         clrsetbits_le32(regs + LTDC_L1PFCR, LXPFCR_PF, val);
282
283         /* Constant alpha value */
284         clrsetbits_le32(regs + LTDC_L1CACR, LXCACR_CONSTA, priv->alpha);
285
286         /* Blending factors */
287         clrsetbits_le32(regs + LTDC_L1BFCR, LXBFCR_BF2 | LXBFCR_BF1,
288                         BF1_PAXCA | BF2_1PAXCA);
289
290         /* Frame buffer line number */
291         clrsetbits_le32(regs + LTDC_L1CFBLNR, LXCFBLNR_CFBLN, priv->crop_h);
292
293         /* Frame buffer address */
294         writel(fb_addr, regs + LTDC_L1CFBAR);
295
296         /* Enable layer 1 */
297         setbits_le32(priv->regs + LTDC_L1CR, LXCR_LEN);
298 }
299
300 static int stm32_ltdc_probe(struct udevice *dev)
301 {
302         struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
303         struct video_priv *uc_priv = dev_get_uclass_priv(dev);
304         struct stm32_ltdc_priv *priv = dev_get_priv(dev);
305         struct udevice *panel;
306         struct clk pclk;
307         struct reset_ctl rst;
308         int rate, ret;
309
310         priv->regs = (void *)dev_read_addr(dev);
311         if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
312                 debug("%s: ltdc dt register address error\n", __func__);
313                 return -EINVAL;
314         }
315
316         ret = clk_get_by_index(dev, 0, &pclk);
317         if (ret) {
318                 debug("%s: peripheral clock get error %d\n", __func__, ret);
319                 return ret;
320         }
321
322         ret = clk_enable(&pclk);
323         if (ret) {
324                 debug("%s: peripheral clock enable error %d\n",
325                       __func__, ret);
326                 return ret;
327         }
328
329         ret = reset_get_by_index(dev, 0, &rst);
330         if (ret) {
331                 debug("%s: missing ltdc hardware reset\n", __func__);
332                 return -ENODEV;
333         }
334
335         /* Reset */
336         reset_deassert(&rst);
337
338         ret = uclass_first_device(UCLASS_PANEL, &panel);
339         if (ret) {
340                 debug("%s: panel device error %d\n", __func__, ret);
341                 return ret;
342         }
343
344         ret = panel_enable_backlight(panel);
345         if (ret) {
346                 debug("%s: panel %s enable backlight error %d\n",
347                       __func__, panel->name, ret);
348                 return ret;
349         }
350
351         ret = fdtdec_decode_display_timing(gd->fdt_blob,
352                                            dev_of_offset(dev), 0,
353                                            &priv->timing);
354         if (ret) {
355                 debug("%s: decode display timing error %d\n",
356                       __func__, ret);
357                 return -EINVAL;
358         }
359
360         rate = clk_set_rate(&pclk, priv->timing.pixelclock.typ);
361         if (rate < 0) {
362                 debug("%s: fail to set pixel clock %d hz %d hz\n",
363                       __func__, priv->timing.pixelclock.typ, rate);
364                 return rate;
365         }
366
367         debug("%s: Set pixel clock req %d hz get %d hz\n", __func__,
368               priv->timing.pixelclock.typ, rate);
369
370         /* TODO Below parameters are hard-coded for the moment... */
371         priv->l2bpp = VIDEO_BPP16;
372         priv->bg_col_argb = 0xFFFFFFFF; /* white no transparency */
373         priv->crop_x = 0;
374         priv->crop_y = 0;
375         priv->crop_w = priv->timing.hactive.typ;
376         priv->crop_h = priv->timing.vactive.typ;
377         priv->alpha = 0xFF;
378
379         debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
380               priv->timing.hactive.typ, priv->timing.vactive.typ,
381               VNBITS(priv->l2bpp), uc_plat->base);
382         debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
383               priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
384               priv->bg_col_argb, priv->alpha);
385
386         /* Configure & start LTDC */
387         stm32_ltdc_set_mode(priv);
388         stm32_ltdc_set_layer1(priv, uc_plat->base);
389         stm32_ltdc_enable(priv);
390
391         uc_priv->xsize = priv->timing.hactive.typ;
392         uc_priv->ysize = priv->timing.vactive.typ;
393         uc_priv->bpix = priv->l2bpp;
394
395         video_set_flush_dcache(dev, true);
396
397         return 0;
398 }
399
400 static int stm32_ltdc_bind(struct udevice *dev)
401 {
402         struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
403
404         uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES *
405                         CONFIG_VIDEO_STM32_MAX_YRES *
406                         (CONFIG_VIDEO_STM32_MAX_BPP >> 3);
407         debug("%s: frame buffer max size %d bytes\n", __func__, uc_plat->size);
408
409         return 0;
410 }
411
412 static const struct udevice_id stm32_ltdc_ids[] = {
413         { .compatible = "st,stm32-ltdc" },
414         { }
415 };
416
417 U_BOOT_DRIVER(stm32_ltdc) = {
418         .name                   = "stm32_display",
419         .id                     = UCLASS_VIDEO,
420         .of_match               = stm32_ltdc_ids,
421         .probe                  = stm32_ltdc_probe,
422         .bind                   = stm32_ltdc_bind,
423         .priv_auto_alloc_size   = sizeof(struct stm32_ltdc_priv),
424 };