video: mxsfb: Add an entry for mx23evk/mx28vk video modes
[oweals/u-boot.git] / drivers / video / atmel_hlcdfb.c
1 /*
2  * Driver for AT91/AT32 MULTI LAYER LCD Controller
3  *
4  * Copyright (C) 2012 Atmel Corporation
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24
25 #include <common.h>
26 #include <asm/io.h>
27 #include <asm/arch/gpio.h>
28 #include <asm/arch/clk.h>
29 #include <lcd.h>
30 #include <atmel_hlcdc.h>
31
32 /* configurable parameters */
33 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
34 #define ATMEL_LCDC_DMA_BURST_LEN        8
35 #ifndef ATMEL_LCDC_GUARD_TIME
36 #define ATMEL_LCDC_GUARD_TIME           1
37 #endif
38
39 #define ATMEL_LCDC_FIFO_SIZE            512
40
41 #define lcdc_readl(reg)         __raw_readl((reg))
42 #define lcdc_writel(reg, val)   __raw_writel((val), (reg))
43
44 /*
45  * the CLUT register map as following
46  * RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0)
47  */
48 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
49 {
50         lcdc_writel(((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk)
51                 | ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk)
52                 | ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk),
53                 panel_info.mmio + ATMEL_LCDC_LUT(regno));
54 }
55
56 void lcd_ctrl_init(void *lcdbase)
57 {
58         unsigned long value;
59         struct lcd_dma_desc *desc;
60         struct atmel_hlcd_regs *regs;
61
62         if (!has_lcdc())
63                 return;     /* No lcdc */
64
65         regs = (struct atmel_hlcd_regs *)panel_info.mmio;
66
67         /* Disable DISP signal */
68         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_DISPDIS);
69         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
70                 udelay(1);
71         /* Disable synchronization */
72         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS);
73         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
74                 udelay(1);
75         /* Disable pixel clock */
76         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_CLKDIS);
77         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
78                 udelay(1);
79         /* Disable PWM */
80         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_PWMDIS);
81         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
82                 udelay(1);
83
84         /* Set pixel clock */
85         value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
86         if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
87                 value++;
88
89         if (value < 1) {
90                 /* Using system clock as pixel clock */
91                 lcdc_writel(&regs->lcdc_lcdcfg0,
92                                         LCDC_LCDCFG0_CLKDIV(0)
93                                         | LCDC_LCDCFG0_CGDISHCR
94                                         | LCDC_LCDCFG0_CGDISHEO
95                                         | LCDC_LCDCFG0_CGDISOVR1
96                                         | LCDC_LCDCFG0_CGDISBASE
97                                         | panel_info.vl_clk_pol
98                                         | LCDC_LCDCFG0_CLKSEL);
99
100         } else {
101                 lcdc_writel(&regs->lcdc_lcdcfg0,
102                                 LCDC_LCDCFG0_CLKDIV(value - 2)
103                                 | LCDC_LCDCFG0_CGDISHCR
104                                 | LCDC_LCDCFG0_CGDISHEO
105                                 | LCDC_LCDCFG0_CGDISOVR1
106                                 | LCDC_LCDCFG0_CGDISBASE
107                                 | panel_info.vl_clk_pol);
108         }
109
110         /* Initialize control register 5 */
111         value = 0;
112
113         value |= panel_info.vl_sync;
114
115 #ifndef LCD_OUTPUT_BPP
116         /* Output is 24bpp */
117         value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
118 #else
119         switch (LCD_OUTPUT_BPP) {
120         case 12:
121                 value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
122                 break;
123         case 16:
124                 value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
125                 break;
126         case 18:
127                 value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
128                 break;
129         case 24:
130                 value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
131                 break;
132         default:
133                 BUG();
134                 break;
135         }
136 #endif
137
138         value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME);
139         value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
140         lcdc_writel(&regs->lcdc_lcdcfg5, value);
141
142         /* Vertical & Horizontal Timing */
143         value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1);
144         value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1);
145         lcdc_writel(&regs->lcdc_lcdcfg1, value);
146
147         value = LCDC_LCDCFG2_VBPW(panel_info.vl_lower_margin);
148         value |= LCDC_LCDCFG2_VFPW(panel_info.vl_upper_margin - 1);
149         lcdc_writel(&regs->lcdc_lcdcfg2, value);
150
151         value = LCDC_LCDCFG3_HBPW(panel_info.vl_right_margin - 1);
152         value |= LCDC_LCDCFG3_HFPW(panel_info.vl_left_margin - 1);
153         lcdc_writel(&regs->lcdc_lcdcfg3, value);
154
155         /* Display size */
156         value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1);
157         value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1);
158         lcdc_writel(&regs->lcdc_lcdcfg4, value);
159
160         lcdc_writel(&regs->lcdc_basecfg0,
161                         LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO);
162
163         switch (NBITS(panel_info.vl_bpix)) {
164         case 16:
165                 lcdc_writel(&regs->lcdc_basecfg1,
166                         LCDC_BASECFG1_RGBMODE_16BPP_RGB_565);
167                 break;
168         default:
169                 BUG();
170                 break;
171         }
172
173         lcdc_writel(&regs->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0));
174         lcdc_writel(&regs->lcdc_basecfg3, 0);
175         lcdc_writel(&regs->lcdc_basecfg4, LCDC_BASECFG4_DMA);
176
177         /* Disable all interrupts */
178         lcdc_writel(&regs->lcdc_lcdidr, ~0UL);
179         lcdc_writel(&regs->lcdc_baseidr, ~0UL);
180
181         /* Setup the DMA descriptor, this descriptor will loop to itself */
182         desc = (struct lcd_dma_desc *)(lcdbase - 16);
183
184         desc->address = (u32)lcdbase;
185         /* Disable DMA transfer interrupt & descriptor loaded interrupt. */
186         desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
187                         | LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
188         desc->next = (u32)desc;
189
190         lcdc_writel(&regs->lcdc_baseaddr, desc->address);
191         lcdc_writel(&regs->lcdc_basectrl, desc->control);
192         lcdc_writel(&regs->lcdc_basenext, desc->next);
193         lcdc_writel(&regs->lcdc_basecher, LCDC_BASECHER_CHEN |
194                                           LCDC_BASECHER_UPDATEEN);
195
196         /* Enable LCD */
197         value = lcdc_readl(&regs->lcdc_lcden);
198         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_CLKEN);
199         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
200                 udelay(1);
201         value = lcdc_readl(&regs->lcdc_lcden);
202         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_SYNCEN);
203         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
204                 udelay(1);
205         value = lcdc_readl(&regs->lcdc_lcden);
206         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_DISPEN);
207         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
208                 udelay(1);
209         value = lcdc_readl(&regs->lcdc_lcden);
210         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_PWMEN);
211         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
212                 udelay(1);
213 }