Merge branch 'iu-boot/master' into 'u-boot-arm/master'
[oweals/u-boot.git] / drivers / video / atmel_hlcdfb.c
1 /*
2  * Driver for AT91/AT32 MULTI LAYER LCD Controller
3  *
4  * Copyright (C) 2012 Atmel Corporation
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #include <common.h>
10 #include <asm/io.h>
11 #include <asm/arch/gpio.h>
12 #include <asm/arch/clk.h>
13 #include <lcd.h>
14 #include <atmel_hlcdc.h>
15
16 /* configurable parameters */
17 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
18 #define ATMEL_LCDC_DMA_BURST_LEN        8
19 #ifndef ATMEL_LCDC_GUARD_TIME
20 #define ATMEL_LCDC_GUARD_TIME           1
21 #endif
22
23 #define ATMEL_LCDC_FIFO_SIZE            512
24
25 #define lcdc_readl(reg)         __raw_readl((reg))
26 #define lcdc_writel(reg, val)   __raw_writel((val), (reg))
27
28 /*
29  * the CLUT register map as following
30  * RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0)
31  */
32 void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
33 {
34         lcdc_writel(((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk)
35                 | ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk)
36                 | ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk),
37                 panel_info.mmio + ATMEL_LCDC_LUT(regno));
38 }
39
40 void lcd_ctrl_init(void *lcdbase)
41 {
42         unsigned long value;
43         struct lcd_dma_desc *desc;
44         struct atmel_hlcd_regs *regs;
45
46         if (!has_lcdc())
47                 return;     /* No lcdc */
48
49         regs = (struct atmel_hlcd_regs *)panel_info.mmio;
50
51         /* Disable DISP signal */
52         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_DISPDIS);
53         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
54                 udelay(1);
55         /* Disable synchronization */
56         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS);
57         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
58                 udelay(1);
59         /* Disable pixel clock */
60         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_CLKDIS);
61         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
62                 udelay(1);
63         /* Disable PWM */
64         lcdc_writel(&regs->lcdc_lcddis, LCDC_LCDDIS_PWMDIS);
65         while ((lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
66                 udelay(1);
67
68         /* Set pixel clock */
69         value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
70         if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
71                 value++;
72
73         if (value < 1) {
74                 /* Using system clock as pixel clock */
75                 lcdc_writel(&regs->lcdc_lcdcfg0,
76                                         LCDC_LCDCFG0_CLKDIV(0)
77                                         | LCDC_LCDCFG0_CGDISHCR
78                                         | LCDC_LCDCFG0_CGDISHEO
79                                         | LCDC_LCDCFG0_CGDISOVR1
80                                         | LCDC_LCDCFG0_CGDISBASE
81                                         | panel_info.vl_clk_pol
82                                         | LCDC_LCDCFG0_CLKSEL);
83
84         } else {
85                 lcdc_writel(&regs->lcdc_lcdcfg0,
86                                 LCDC_LCDCFG0_CLKDIV(value - 2)
87                                 | LCDC_LCDCFG0_CGDISHCR
88                                 | LCDC_LCDCFG0_CGDISHEO
89                                 | LCDC_LCDCFG0_CGDISOVR1
90                                 | LCDC_LCDCFG0_CGDISBASE
91                                 | panel_info.vl_clk_pol);
92         }
93
94         /* Initialize control register 5 */
95         value = 0;
96
97         value |= panel_info.vl_sync;
98
99 #ifndef LCD_OUTPUT_BPP
100         /* Output is 24bpp */
101         value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
102 #else
103         switch (LCD_OUTPUT_BPP) {
104         case 12:
105                 value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
106                 break;
107         case 16:
108                 value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
109                 break;
110         case 18:
111                 value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
112                 break;
113         case 24:
114                 value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
115                 break;
116         default:
117                 BUG();
118                 break;
119         }
120 #endif
121
122         value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME);
123         value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
124         lcdc_writel(&regs->lcdc_lcdcfg5, value);
125
126         /* Vertical & Horizontal Timing */
127         value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1);
128         value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1);
129         lcdc_writel(&regs->lcdc_lcdcfg1, value);
130
131         value = LCDC_LCDCFG2_VBPW(panel_info.vl_lower_margin);
132         value |= LCDC_LCDCFG2_VFPW(panel_info.vl_upper_margin - 1);
133         lcdc_writel(&regs->lcdc_lcdcfg2, value);
134
135         value = LCDC_LCDCFG3_HBPW(panel_info.vl_right_margin - 1);
136         value |= LCDC_LCDCFG3_HFPW(panel_info.vl_left_margin - 1);
137         lcdc_writel(&regs->lcdc_lcdcfg3, value);
138
139         /* Display size */
140         value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1);
141         value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1);
142         lcdc_writel(&regs->lcdc_lcdcfg4, value);
143
144         lcdc_writel(&regs->lcdc_basecfg0,
145                         LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO);
146
147         switch (NBITS(panel_info.vl_bpix)) {
148         case 16:
149                 lcdc_writel(&regs->lcdc_basecfg1,
150                         LCDC_BASECFG1_RGBMODE_16BPP_RGB_565);
151                 break;
152         default:
153                 BUG();
154                 break;
155         }
156
157         lcdc_writel(&regs->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0));
158         lcdc_writel(&regs->lcdc_basecfg3, 0);
159         lcdc_writel(&regs->lcdc_basecfg4, LCDC_BASECFG4_DMA);
160
161         /* Disable all interrupts */
162         lcdc_writel(&regs->lcdc_lcdidr, ~0UL);
163         lcdc_writel(&regs->lcdc_baseidr, ~0UL);
164
165         /* Setup the DMA descriptor, this descriptor will loop to itself */
166         desc = (struct lcd_dma_desc *)(lcdbase - 16);
167
168         desc->address = (u32)lcdbase;
169         /* Disable DMA transfer interrupt & descriptor loaded interrupt. */
170         desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
171                         | LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
172         desc->next = (u32)desc;
173
174         lcdc_writel(&regs->lcdc_baseaddr, desc->address);
175         lcdc_writel(&regs->lcdc_basectrl, desc->control);
176         lcdc_writel(&regs->lcdc_basenext, desc->next);
177         lcdc_writel(&regs->lcdc_basecher, LCDC_BASECHER_CHEN |
178                                           LCDC_BASECHER_UPDATEEN);
179
180         /* Enable LCD */
181         value = lcdc_readl(&regs->lcdc_lcden);
182         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_CLKEN);
183         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
184                 udelay(1);
185         value = lcdc_readl(&regs->lcdc_lcden);
186         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_SYNCEN);
187         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
188                 udelay(1);
189         value = lcdc_readl(&regs->lcdc_lcden);
190         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_DISPEN);
191         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
192                 udelay(1);
193         value = lcdc_readl(&regs->lcdc_lcden);
194         lcdc_writel(&regs->lcdc_lcden, value | LCDC_LCDEN_PWMEN);
195         while (!(lcdc_readl(&regs->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
196                 udelay(1);
197 }