2 * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
4 * Copyright (C) 2003-2005,2008 David Brownell
5 * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
6 * Copyright (C) 2008 Nokia Corporation
8 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/errno.h>
13 #include <linux/netdevice.h>
14 #include <linux/usb/ch9.h>
15 #include <linux/usb/cdc.h>
16 #include <linux/usb/gadget.h>
19 #include <linux/ctype.h>
21 #include "gadget_chips.h"
24 #define USB_NET_NAME "usb_ether"
27 extern struct platform_data brd;
30 unsigned packet_received, packet_sent;
33 * Ethernet gadget driver -- with CDC and non-CDC options
34 * Builds on hardware support for a full duplex link.
36 * CDC Ethernet is the standard USB solution for sending Ethernet frames
37 * using USB. Real hardware tends to use the same framing protocol but look
38 * different for control features. This driver strongly prefers to use
39 * this USB-IF standard as its open-systems interoperability solution;
40 * most host side USB stacks (except from Microsoft) support it.
42 * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
43 * TLA-soup. "CDC ACM" (Abstract Control Model) is for modems, and a new
44 * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
46 * There's some hardware that can't talk CDC ECM. We make that hardware
47 * implement a "minimalist" vendor-agnostic CDC core: same framing, but
48 * link-level setup only requires activating the configuration. Only the
49 * endpoint descriptors, and product/vendor IDs, are relevant; no control
50 * operations are available. Linux supports it, but other host operating
51 * systems may not. (This is a subset of CDC Ethernet.)
53 * It turns out that if you add a few descriptors to that "CDC Subset",
54 * (Windows) host side drivers from MCCI can treat it as one submode of
55 * a proprietary scheme called "SAFE" ... without needing to know about
56 * specific product/vendor IDs. So we do that, making it easier to use
57 * those MS-Windows drivers. Those added descriptors make it resemble a
58 * CDC MDLM device, but they don't change device behavior at all. (See
59 * MCCI Engineering report 950198 "SAFE Networking Functions".)
61 * A third option is also in use. Rather than CDC Ethernet, or something
62 * simpler, Microsoft pushes their own approach: RNDIS. The published
63 * RNDIS specs are ambiguous and appear to be incomplete, and are also
64 * needlessly complex. They borrow more from CDC ACM than CDC ECM.
66 #define ETH_ALEN 6 /* Octets in one ethernet addr */
67 #define ETH_HLEN 14 /* Total octets in header. */
68 #define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
69 #define ETH_DATA_LEN 1500 /* Max. octets in payload */
70 #define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */
72 #define DRIVER_DESC "Ethernet Gadget"
73 /* Based on linux 2.6.27 version */
74 #define DRIVER_VERSION "May Day 2005"
76 static const char shortname[] = "ether";
77 static const char driver_desc[] = DRIVER_DESC;
79 #define RX_EXTRA 20 /* guard against rx overflows */
81 #ifndef CONFIG_USB_ETH_RNDIS
82 #define rndis_uninit(x) do {} while (0)
83 #define rndis_deregister(c) do {} while (0)
84 #define rndis_exit() do {} while (0)
87 /* CDC and RNDIS support the same host-chosen outgoing packet filters. */
88 #define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
89 |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
90 |USB_CDC_PACKET_TYPE_PROMISCUOUS \
91 |USB_CDC_PACKET_TYPE_DIRECTED)
93 #define USB_CONNECT_TIMEOUT (3 * CONFIG_SYS_HZ)
95 /*-------------------------------------------------------------------------*/
98 struct usb_gadget *gadget;
99 struct usb_request *req; /* for control responses */
100 struct usb_request *stat_req; /* for cdc & rndis status */
103 struct usb_ep *in_ep, *out_ep, *status_ep;
104 const struct usb_endpoint_descriptor
107 struct usb_request *tx_req, *rx_req;
109 struct eth_device *net;
110 struct net_device_stats stats;
111 unsigned int tx_qlen;
116 unsigned suspended:1;
117 unsigned network_started:1;
121 #define WORK_RX_MEMORY 0
123 u8 host_mac[ETH_ALEN];
127 * This version autoconfigures as much as possible at run-time.
129 * It also ASSUMES a self-powered device, without remote wakeup,
130 * although remote wakeup support would make sense.
133 /*-------------------------------------------------------------------------*/
134 static struct eth_dev l_ethdev;
135 static struct eth_device l_netdev;
136 static struct usb_gadget_driver eth_driver;
138 /*-------------------------------------------------------------------------*/
140 /* "main" config is either CDC, or its simple subset */
141 static inline int is_cdc(struct eth_dev *dev)
143 #if !defined(CONFIG_USB_ETH_SUBSET)
144 return 1; /* only cdc possible */
145 #elif !defined(CONFIG_USB_ETH_CDC)
146 return 0; /* only subset possible */
148 return dev->cdc; /* depends on what hardware we found */
152 /* "secondary" RNDIS config may sometimes be activated */
153 static inline int rndis_active(struct eth_dev *dev)
155 #ifdef CONFIG_USB_ETH_RNDIS
162 #define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev))
163 #define cdc_active(dev) (is_cdc(dev) && !rndis_active(dev))
165 #define DEFAULT_QLEN 2 /* double buffering by default */
167 /* peak bulk transfer bits-per-second */
168 #define HS_BPS (13 * 512 * 8 * 1000 * 8)
169 #define FS_BPS (19 * 64 * 1 * 1000 * 8)
171 #ifdef CONFIG_USB_GADGET_DUALSPEED
172 #define DEVSPEED USB_SPEED_HIGH
174 #ifdef CONFIG_USB_ETH_QMULT
175 #define qmult CONFIG_USB_ETH_QMULT
180 /* for dual-speed hardware, use deeper queues at highspeed */
181 #define qlen(gadget) \
182 (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
184 static inline int BITRATE(struct usb_gadget *g)
186 return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
189 #else /* full speed (low speed doesn't do bulk) */
193 #define DEVSPEED USB_SPEED_FULL
195 #define qlen(gadget) DEFAULT_QLEN
197 static inline int BITRATE(struct usb_gadget *g)
203 /*-------------------------------------------------------------------------*/
206 * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
207 * Instead: allocate your own, using normal USB-IF procedures.
211 * Thanks to NetChip Technologies for donating this product ID.
212 * It's for devices with only CDC Ethernet configurations.
214 #define CDC_VENDOR_NUM 0x0525 /* NetChip */
215 #define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
218 * For hardware that can't talk CDC, we use the same vendor ID that
219 * ARM Linux has used for ethernet-over-usb, both with sa1100 and
220 * with pxa250. We're protocol-compatible, if the host-side drivers
221 * use the endpoint descriptors. bcdDevice (version) is nonzero, so
222 * drivers that need to hard-wire endpoint numbers have a hook.
224 * The protocol is a minimal subset of CDC Ether, which works on any bulk
225 * hardware that's not deeply broken ... even on hardware that can't talk
226 * RNDIS (like SA-1100, with no interrupt endpoint, or anything that
227 * doesn't handle control-OUT).
229 #define SIMPLE_VENDOR_NUM 0x049f /* Compaq Computer Corp. */
230 #define SIMPLE_PRODUCT_NUM 0x505a /* Linux-USB "CDC Subset" Device */
233 * For hardware that can talk RNDIS and either of the above protocols,
234 * use this ID ... the windows INF files will know it. Unless it's
235 * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
236 * the non-RNDIS configuration.
238 #define RNDIS_VENDOR_NUM 0x0525 /* NetChip */
239 #define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
242 * Some systems will want different product identifers published in the
243 * device descriptor, either numbers or strings or both. These string
244 * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
248 * Emulating them in eth_bind:
249 * static ushort idVendor;
250 * static ushort idProduct;
253 #if defined(CONFIG_USBNET_MANUFACTURER)
254 static char *iManufacturer = CONFIG_USBNET_MANUFACTURER;
256 static char *iManufacturer = "U-boot";
259 /* These probably need to be configurable. */
260 static ushort bcdDevice;
261 static char *iProduct;
262 static char *iSerialNumber;
264 static char dev_addr[18];
266 static char host_addr[18];
269 /*-------------------------------------------------------------------------*/
272 * USB DRIVER HOOKUP (to the hardware driver, below us), mostly
273 * ep0 implementation: descriptors, config management, setup().
274 * also optional class-specific notification interrupt transfer.
278 * DESCRIPTORS ... most are static, but strings and (full) configuration
279 * descriptors are built on demand. For now we do either full CDC, or
280 * our simple subset, with RNDIS as an optional second configuration.
282 * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet. But
283 * the class descriptors match a modem (they're ignored; it's really just
284 * Ethernet functionality), they don't need the NOP altsetting, and the
285 * status transfer endpoint isn't optional.
288 #define STRING_MANUFACTURER 1
289 #define STRING_PRODUCT 2
290 #define STRING_ETHADDR 3
291 #define STRING_DATA 4
292 #define STRING_CONTROL 5
293 #define STRING_RNDIS_CONTROL 6
295 #define STRING_SUBSET 8
296 #define STRING_RNDIS 9
297 #define STRING_SERIALNUMBER 10
299 /* holds our biggest descriptor (or RNDIS response) */
300 #define USB_BUFSIZ 256
303 * This device advertises one configuration, eth_config, unless RNDIS
304 * is enabled (rndis_config) on hardware supporting at least two configs.
306 * NOTE: Controllers like superh_udc should probably be able to use
307 * an RNDIS-only configuration.
309 * FIXME define some higher-powered configurations to make it easier
310 * to recharge batteries ...
313 #define DEV_CONFIG_VALUE 1 /* cdc or subset */
314 #define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */
316 static struct usb_device_descriptor
318 .bLength = sizeof device_desc,
319 .bDescriptorType = USB_DT_DEVICE,
321 .bcdUSB = __constant_cpu_to_le16(0x0200),
323 .bDeviceClass = USB_CLASS_COMM,
324 .bDeviceSubClass = 0,
325 .bDeviceProtocol = 0,
327 .idVendor = __constant_cpu_to_le16(CDC_VENDOR_NUM),
328 .idProduct = __constant_cpu_to_le16(CDC_PRODUCT_NUM),
329 .iManufacturer = STRING_MANUFACTURER,
330 .iProduct = STRING_PRODUCT,
331 .bNumConfigurations = 1,
334 static struct usb_otg_descriptor
336 .bLength = sizeof otg_descriptor,
337 .bDescriptorType = USB_DT_OTG,
339 .bmAttributes = USB_OTG_SRP,
342 static struct usb_config_descriptor
344 .bLength = sizeof eth_config,
345 .bDescriptorType = USB_DT_CONFIG,
347 /* compute wTotalLength on the fly */
349 .bConfigurationValue = DEV_CONFIG_VALUE,
350 .iConfiguration = STRING_CDC,
351 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
355 #ifdef CONFIG_USB_ETH_RNDIS
356 static struct usb_config_descriptor
358 .bLength = sizeof rndis_config,
359 .bDescriptorType = USB_DT_CONFIG,
361 /* compute wTotalLength on the fly */
363 .bConfigurationValue = DEV_RNDIS_CONFIG_VALUE,
364 .iConfiguration = STRING_RNDIS,
365 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
371 * Compared to the simple CDC subset, the full CDC Ethernet model adds
372 * three class descriptors, two interface descriptors, optional status
373 * endpoint. Both have a "data" interface and two bulk endpoints.
374 * There are also differences in how control requests are handled.
376 * RNDIS shares a lot with CDC-Ethernet, since it's a variant of the
377 * CDC-ACM (modem) spec. Unfortunately MSFT's RNDIS driver is buggy; it
378 * may hang or oops. Since bugfixes (or accurate specs, letting Linux
379 * work around those bugs) are unlikely to ever come from MSFT, you may
380 * wish to avoid using RNDIS.
382 * MCCI offers an alternative to RNDIS if you need to connect to Windows
383 * but have hardware that can't support CDC Ethernet. We add descriptors
384 * to present the CDC Subset as a (nonconformant) CDC MDLM variant called
385 * "SAFE". That borrows from both CDC Ethernet and CDC MDLM. You can
386 * get those drivers from MCCI, or bundled with various products.
389 #ifdef CONFIG_USB_ETH_CDC
390 static struct usb_interface_descriptor
392 .bLength = sizeof control_intf,
393 .bDescriptorType = USB_DT_INTERFACE,
395 .bInterfaceNumber = 0,
396 /* status endpoint is optional; this may be patched later */
398 .bInterfaceClass = USB_CLASS_COMM,
399 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
400 .bInterfaceProtocol = USB_CDC_PROTO_NONE,
401 .iInterface = STRING_CONTROL,
405 #ifdef CONFIG_USB_ETH_RNDIS
406 static const struct usb_interface_descriptor
407 rndis_control_intf = {
408 .bLength = sizeof rndis_control_intf,
409 .bDescriptorType = USB_DT_INTERFACE,
411 .bInterfaceNumber = 0,
413 .bInterfaceClass = USB_CLASS_COMM,
414 .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
415 .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR,
416 .iInterface = STRING_RNDIS_CONTROL,
420 static const struct usb_cdc_header_desc header_desc = {
421 .bLength = sizeof header_desc,
422 .bDescriptorType = USB_DT_CS_INTERFACE,
423 .bDescriptorSubType = USB_CDC_HEADER_TYPE,
425 .bcdCDC = __constant_cpu_to_le16(0x0110),
428 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
430 static const struct usb_cdc_union_desc union_desc = {
431 .bLength = sizeof union_desc,
432 .bDescriptorType = USB_DT_CS_INTERFACE,
433 .bDescriptorSubType = USB_CDC_UNION_TYPE,
435 .bMasterInterface0 = 0, /* index of control interface */
436 .bSlaveInterface0 = 1, /* index of DATA interface */
439 #endif /* CDC || RNDIS */
441 #ifdef CONFIG_USB_ETH_RNDIS
443 static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
444 .bLength = sizeof call_mgmt_descriptor,
445 .bDescriptorType = USB_DT_CS_INTERFACE,
446 .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
448 .bmCapabilities = 0x00,
449 .bDataInterface = 0x01,
452 static const struct usb_cdc_acm_descriptor acm_descriptor = {
453 .bLength = sizeof acm_descriptor,
454 .bDescriptorType = USB_DT_CS_INTERFACE,
455 .bDescriptorSubType = USB_CDC_ACM_TYPE,
457 .bmCapabilities = 0x00,
462 #ifndef CONFIG_USB_ETH_CDC
465 * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
466 * ways: data endpoints live in the control interface, there's no data
467 * interface, and it's not used to talk to a cell phone radio.
470 static const struct usb_cdc_mdlm_desc mdlm_desc = {
471 .bLength = sizeof mdlm_desc,
472 .bDescriptorType = USB_DT_CS_INTERFACE,
473 .bDescriptorSubType = USB_CDC_MDLM_TYPE,
475 .bcdVersion = __constant_cpu_to_le16(0x0100),
477 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
478 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
483 * since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
484 * can't really use its struct. All we do here is say that we're using
485 * the submode of "SAFE" which directly matches the CDC Subset.
487 static const u8 mdlm_detail_desc[] = {
490 USB_CDC_MDLM_DETAIL_TYPE,
493 0, /* network control capabilities (none) */
494 0, /* network data capabilities ("raw" encapsulation) */
499 static const struct usb_cdc_ether_desc ether_desc = {
500 .bLength = sizeof(ether_desc),
501 .bDescriptorType = USB_DT_CS_INTERFACE,
502 .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
504 /* this descriptor actually adds value, surprise! */
505 .iMACAddress = STRING_ETHADDR,
506 .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
507 .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN),
508 .wNumberMCFilters = __constant_cpu_to_le16(0),
509 .bNumberPowerFilters = 0,
512 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
515 * include the status endpoint if we can, even where it's optional.
516 * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
517 * packet, to simplify cancellation; and a big transfer interval, to
518 * waste less bandwidth.
520 * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
521 * if they ignore the connect/disconnect notifications that real aether
522 * can provide. more advanced cdc configurations might want to support
523 * encapsulated commands (vendor-specific, using control-OUT).
525 * RNDIS requires the status endpoint, since it uses that encapsulation
526 * mechanism for its funky RPC scheme.
529 #define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
530 #define STATUS_BYTECOUNT 16 /* 8 byte header + data */
532 static struct usb_endpoint_descriptor
534 .bLength = USB_DT_ENDPOINT_SIZE,
535 .bDescriptorType = USB_DT_ENDPOINT,
537 .bEndpointAddress = USB_DIR_IN,
538 .bmAttributes = USB_ENDPOINT_XFER_INT,
539 .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
540 .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
544 #ifdef CONFIG_USB_ETH_CDC
546 /* the default data interface has no endpoints ... */
548 static const struct usb_interface_descriptor
550 .bLength = sizeof data_nop_intf,
551 .bDescriptorType = USB_DT_INTERFACE,
553 .bInterfaceNumber = 1,
554 .bAlternateSetting = 0,
556 .bInterfaceClass = USB_CLASS_CDC_DATA,
557 .bInterfaceSubClass = 0,
558 .bInterfaceProtocol = 0,
561 /* ... but the "real" data interface has two bulk endpoints */
563 static const struct usb_interface_descriptor
565 .bLength = sizeof data_intf,
566 .bDescriptorType = USB_DT_INTERFACE,
568 .bInterfaceNumber = 1,
569 .bAlternateSetting = 1,
571 .bInterfaceClass = USB_CLASS_CDC_DATA,
572 .bInterfaceSubClass = 0,
573 .bInterfaceProtocol = 0,
574 .iInterface = STRING_DATA,
579 #ifdef CONFIG_USB_ETH_RNDIS
581 /* RNDIS doesn't activate by changing to the "real" altsetting */
583 static const struct usb_interface_descriptor
585 .bLength = sizeof rndis_data_intf,
586 .bDescriptorType = USB_DT_INTERFACE,
588 .bInterfaceNumber = 1,
589 .bAlternateSetting = 0,
591 .bInterfaceClass = USB_CLASS_CDC_DATA,
592 .bInterfaceSubClass = 0,
593 .bInterfaceProtocol = 0,
594 .iInterface = STRING_DATA,
599 #ifdef CONFIG_USB_ETH_SUBSET
602 * "Simple" CDC-subset option is a simple vendor-neutral model that most
603 * full speed controllers can handle: one interface, two bulk endpoints.
605 * To assist host side drivers, we fancy it up a bit, and add descriptors
606 * so some host side drivers will understand it as a "SAFE" variant.
609 static const struct usb_interface_descriptor
611 .bLength = sizeof subset_data_intf,
612 .bDescriptorType = USB_DT_INTERFACE,
614 .bInterfaceNumber = 0,
615 .bAlternateSetting = 0,
617 .bInterfaceClass = USB_CLASS_COMM,
618 .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM,
619 .bInterfaceProtocol = 0,
620 .iInterface = STRING_DATA,
625 static struct usb_endpoint_descriptor
627 .bLength = USB_DT_ENDPOINT_SIZE,
628 .bDescriptorType = USB_DT_ENDPOINT,
630 .bEndpointAddress = USB_DIR_IN,
631 .bmAttributes = USB_ENDPOINT_XFER_BULK,
632 .wMaxPacketSize = __constant_cpu_to_le16(64),
635 static struct usb_endpoint_descriptor
637 .bLength = USB_DT_ENDPOINT_SIZE,
638 .bDescriptorType = USB_DT_ENDPOINT,
640 .bEndpointAddress = USB_DIR_OUT,
641 .bmAttributes = USB_ENDPOINT_XFER_BULK,
642 .wMaxPacketSize = __constant_cpu_to_le16(64),
645 static const struct usb_descriptor_header *fs_eth_function[11] = {
646 (struct usb_descriptor_header *) &otg_descriptor,
647 #ifdef CONFIG_USB_ETH_CDC
648 /* "cdc" mode descriptors */
649 (struct usb_descriptor_header *) &control_intf,
650 (struct usb_descriptor_header *) &header_desc,
651 (struct usb_descriptor_header *) &union_desc,
652 (struct usb_descriptor_header *) ðer_desc,
653 /* NOTE: status endpoint may need to be removed */
654 (struct usb_descriptor_header *) &fs_status_desc,
655 /* data interface, with altsetting */
656 (struct usb_descriptor_header *) &data_nop_intf,
657 (struct usb_descriptor_header *) &data_intf,
658 (struct usb_descriptor_header *) &fs_source_desc,
659 (struct usb_descriptor_header *) &fs_sink_desc,
661 #endif /* CONFIG_USB_ETH_CDC */
664 static inline void fs_subset_descriptors(void)
666 #ifdef CONFIG_USB_ETH_SUBSET
667 /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
668 fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
669 fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
670 fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
671 fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
672 fs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc;
673 fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc;
674 fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc;
675 fs_eth_function[8] = NULL;
677 fs_eth_function[1] = NULL;
681 #ifdef CONFIG_USB_ETH_RNDIS
682 static const struct usb_descriptor_header *fs_rndis_function[] = {
683 (struct usb_descriptor_header *) &otg_descriptor,
684 /* control interface matches ACM, not Ethernet */
685 (struct usb_descriptor_header *) &rndis_control_intf,
686 (struct usb_descriptor_header *) &header_desc,
687 (struct usb_descriptor_header *) &call_mgmt_descriptor,
688 (struct usb_descriptor_header *) &acm_descriptor,
689 (struct usb_descriptor_header *) &union_desc,
690 (struct usb_descriptor_header *) &fs_status_desc,
691 /* data interface has no altsetting */
692 (struct usb_descriptor_header *) &rndis_data_intf,
693 (struct usb_descriptor_header *) &fs_source_desc,
694 (struct usb_descriptor_header *) &fs_sink_desc,
700 * usb 2.0 devices need to expose both high speed and full speed
701 * descriptors, unless they only run at full speed.
704 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
705 static struct usb_endpoint_descriptor
707 .bLength = USB_DT_ENDPOINT_SIZE,
708 .bDescriptorType = USB_DT_ENDPOINT,
710 .bmAttributes = USB_ENDPOINT_XFER_INT,
711 .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
712 .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
714 #endif /* CONFIG_USB_ETH_CDC */
716 static struct usb_endpoint_descriptor
718 .bLength = USB_DT_ENDPOINT_SIZE,
719 .bDescriptorType = USB_DT_ENDPOINT,
721 .bmAttributes = USB_ENDPOINT_XFER_BULK,
722 .wMaxPacketSize = __constant_cpu_to_le16(512),
725 static struct usb_endpoint_descriptor
727 .bLength = USB_DT_ENDPOINT_SIZE,
728 .bDescriptorType = USB_DT_ENDPOINT,
730 .bmAttributes = USB_ENDPOINT_XFER_BULK,
731 .wMaxPacketSize = __constant_cpu_to_le16(512),
734 static struct usb_qualifier_descriptor
736 .bLength = sizeof dev_qualifier,
737 .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
739 .bcdUSB = __constant_cpu_to_le16(0x0200),
740 .bDeviceClass = USB_CLASS_COMM,
742 .bNumConfigurations = 1,
745 static const struct usb_descriptor_header *hs_eth_function[11] = {
746 (struct usb_descriptor_header *) &otg_descriptor,
747 #ifdef CONFIG_USB_ETH_CDC
748 /* "cdc" mode descriptors */
749 (struct usb_descriptor_header *) &control_intf,
750 (struct usb_descriptor_header *) &header_desc,
751 (struct usb_descriptor_header *) &union_desc,
752 (struct usb_descriptor_header *) ðer_desc,
753 /* NOTE: status endpoint may need to be removed */
754 (struct usb_descriptor_header *) &hs_status_desc,
755 /* data interface, with altsetting */
756 (struct usb_descriptor_header *) &data_nop_intf,
757 (struct usb_descriptor_header *) &data_intf,
758 (struct usb_descriptor_header *) &hs_source_desc,
759 (struct usb_descriptor_header *) &hs_sink_desc,
761 #endif /* CONFIG_USB_ETH_CDC */
764 static inline void hs_subset_descriptors(void)
766 #ifdef CONFIG_USB_ETH_SUBSET
767 /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
768 hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
769 hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
770 hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
771 hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
772 hs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc;
773 hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc;
774 hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc;
775 hs_eth_function[8] = NULL;
777 hs_eth_function[1] = NULL;
781 #ifdef CONFIG_USB_ETH_RNDIS
782 static const struct usb_descriptor_header *hs_rndis_function[] = {
783 (struct usb_descriptor_header *) &otg_descriptor,
784 /* control interface matches ACM, not Ethernet */
785 (struct usb_descriptor_header *) &rndis_control_intf,
786 (struct usb_descriptor_header *) &header_desc,
787 (struct usb_descriptor_header *) &call_mgmt_descriptor,
788 (struct usb_descriptor_header *) &acm_descriptor,
789 (struct usb_descriptor_header *) &union_desc,
790 (struct usb_descriptor_header *) &hs_status_desc,
791 /* data interface has no altsetting */
792 (struct usb_descriptor_header *) &rndis_data_intf,
793 (struct usb_descriptor_header *) &hs_source_desc,
794 (struct usb_descriptor_header *) &hs_sink_desc,
800 /* maxpacket and other transfer characteristics vary by speed. */
801 static inline struct usb_endpoint_descriptor *
802 ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
803 struct usb_endpoint_descriptor *fs)
805 if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
810 /*-------------------------------------------------------------------------*/
812 /* descriptors that are built on-demand */
814 static char manufacturer[50];
815 static char product_desc[40] = DRIVER_DESC;
816 static char serial_number[20];
818 /* address that the host will use ... usually assigned at random */
819 static char ethaddr[2 * ETH_ALEN + 1];
821 /* static strings, in UTF-8 */
822 static struct usb_string strings[] = {
823 { STRING_MANUFACTURER, manufacturer, },
824 { STRING_PRODUCT, product_desc, },
825 { STRING_SERIALNUMBER, serial_number, },
826 { STRING_DATA, "Ethernet Data", },
827 { STRING_ETHADDR, ethaddr, },
828 #ifdef CONFIG_USB_ETH_CDC
829 { STRING_CDC, "CDC Ethernet", },
830 { STRING_CONTROL, "CDC Communications Control", },
832 #ifdef CONFIG_USB_ETH_SUBSET
833 { STRING_SUBSET, "CDC Ethernet Subset", },
835 #ifdef CONFIG_USB_ETH_RNDIS
836 { STRING_RNDIS, "RNDIS", },
837 { STRING_RNDIS_CONTROL, "RNDIS Communications Control", },
839 { } /* end of list */
842 static struct usb_gadget_strings stringtab = {
843 .language = 0x0409, /* en-us */
847 /*============================================================================*/
848 DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ);
850 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
851 DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT);
854 /*============================================================================*/
857 * one config, two interfaces: control, data.
858 * complications: class descriptors, and an altsetting.
861 config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
864 const struct usb_config_descriptor *config;
865 const struct usb_descriptor_header **function;
868 if (gadget_is_dualspeed(g)) {
869 hs = (g->speed == USB_SPEED_HIGH);
870 if (type == USB_DT_OTHER_SPEED_CONFIG)
873 #define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
875 if (index >= device_desc.bNumConfigurations)
878 #ifdef CONFIG_USB_ETH_RNDIS
880 * list the RNDIS config first, to make Microsoft's drivers
881 * happy. DOCSIS 1.0 needs this too.
883 if (device_desc.bNumConfigurations == 2 && index == 0) {
884 config = &rndis_config;
885 function = which_fn(rndis);
889 config = ð_config;
890 function = which_fn(eth);
893 /* for now, don't advertise srp-only devices */
897 len = usb_gadget_config_buf(config, buf, USB_BUFSIZ, function);
900 ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
904 /*-------------------------------------------------------------------------*/
906 static void eth_start(struct eth_dev *dev, gfp_t gfp_flags);
907 static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
910 set_ether_config(struct eth_dev *dev, gfp_t gfp_flags)
913 struct usb_gadget *gadget = dev->gadget;
915 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
916 /* status endpoint used for RNDIS and (optionally) CDC */
917 if (!subset_active(dev) && dev->status_ep) {
918 dev->status = ep_desc(gadget, &hs_status_desc,
920 dev->status_ep->driver_data = dev;
922 result = usb_ep_enable(dev->status_ep, dev->status);
924 debug("enable %s --> %d\n",
925 dev->status_ep->name, result);
931 dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
932 dev->in_ep->driver_data = dev;
934 dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
935 dev->out_ep->driver_data = dev;
938 * With CDC, the host isn't allowed to use these two data
939 * endpoints in the default altsetting for the interface.
940 * so we don't activate them yet. Reset from SET_INTERFACE.
942 * Strictly speaking RNDIS should work the same: activation is
943 * a side effect of setting a packet filter. Deactivation is
944 * from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG.
946 if (!cdc_active(dev)) {
947 result = usb_ep_enable(dev->in_ep, dev->in);
949 debug("enable %s --> %d\n",
950 dev->in_ep->name, result);
954 result = usb_ep_enable(dev->out_ep, dev->out);
956 debug("enable %s --> %d\n",
957 dev->out_ep->name, result);
964 result = alloc_requests(dev, qlen(gadget), gfp_flags);
966 /* on error, disable any endpoints */
968 if (!subset_active(dev) && dev->status_ep)
969 (void) usb_ep_disable(dev->status_ep);
971 (void) usb_ep_disable(dev->in_ep);
972 (void) usb_ep_disable(dev->out_ep);
975 } else if (!cdc_active(dev)) {
977 * activate non-CDC configs right away
978 * this isn't strictly according to the RNDIS spec
980 eth_start(dev, GFP_ATOMIC);
983 /* caller is responsible for cleanup on error */
987 static void eth_reset_config(struct eth_dev *dev)
989 if (dev->config == 0)
992 debug("%s\n", __func__);
994 rndis_uninit(dev->rndis_config);
997 * disable endpoints, forcing (synchronous) completion of
998 * pending i/o. then free the requests.
1002 usb_ep_disable(dev->in_ep);
1004 usb_ep_free_request(dev->in_ep, dev->tx_req);
1009 usb_ep_disable(dev->out_ep);
1011 usb_ep_free_request(dev->out_ep, dev->rx_req);
1016 usb_ep_disable(dev->status_ep);
1019 dev->cdc_filter = 0;
1024 * change our operational config. must agree with the code
1025 * that returns config descriptors, and altsetting code.
1027 static int eth_set_config(struct eth_dev *dev, unsigned number,
1031 struct usb_gadget *gadget = dev->gadget;
1033 if (gadget_is_sa1100(gadget)
1035 && dev->tx_qlen != 0) {
1036 /* tx fifo is full, but we can't clear it...*/
1037 error("can't change configurations");
1040 eth_reset_config(dev);
1043 case DEV_CONFIG_VALUE:
1044 result = set_ether_config(dev, gfp_flags);
1046 #ifdef CONFIG_USB_ETH_RNDIS
1047 case DEV_RNDIS_CONFIG_VALUE:
1049 result = set_ether_config(dev, gfp_flags);
1061 eth_reset_config(dev);
1062 usb_gadget_vbus_draw(dev->gadget,
1063 gadget_is_otg(dev->gadget) ? 8 : 100);
1068 power = 2 * eth_config.bMaxPower;
1069 usb_gadget_vbus_draw(dev->gadget, power);
1071 switch (gadget->speed) {
1072 case USB_SPEED_FULL:
1073 speed = "full"; break;
1074 #ifdef CONFIG_USB_GADGET_DUALSPEED
1075 case USB_SPEED_HIGH:
1076 speed = "high"; break;
1082 dev->config = number;
1083 printf("%s speed config #%d: %d mA, %s, using %s\n",
1084 speed, number, power, driver_desc,
1089 : "CDC Ethernet Subset"));
1094 /*-------------------------------------------------------------------------*/
1096 #ifdef CONFIG_USB_ETH_CDC
1099 * The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
1100 * only to notify the host about link status changes (which we support) or
1101 * report completion of some encapsulated command (as used in RNDIS). Since
1102 * we want this CDC Ethernet code to be vendor-neutral, we don't use that
1103 * command mechanism; and only one status request is ever queued.
1105 static void eth_status_complete(struct usb_ep *ep, struct usb_request *req)
1107 struct usb_cdc_notification *event = req->buf;
1108 int value = req->status;
1109 struct eth_dev *dev = ep->driver_data;
1111 /* issue the second notification if host reads the first */
1112 if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION
1114 __le32 *data = req->buf + sizeof *event;
1116 event->bmRequestType = 0xA1;
1117 event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
1118 event->wValue = __constant_cpu_to_le16(0);
1119 event->wIndex = __constant_cpu_to_le16(1);
1120 event->wLength = __constant_cpu_to_le16(8);
1122 /* SPEED_CHANGE data is up/down speeds in bits/sec */
1123 data[0] = data[1] = cpu_to_le32(BITRATE(dev->gadget));
1125 req->length = STATUS_BYTECOUNT;
1126 value = usb_ep_queue(ep, req, GFP_ATOMIC);
1127 debug("send SPEED_CHANGE --> %d\n", value);
1130 } else if (value != -ECONNRESET) {
1131 debug("event %02x --> %d\n",
1132 event->bNotificationType, value);
1133 if (event->bNotificationType ==
1134 USB_CDC_NOTIFY_SPEED_CHANGE) {
1135 l_ethdev.network_started = 1;
1136 printf("USB network up!\n");
1139 req->context = NULL;
1142 static void issue_start_status(struct eth_dev *dev)
1144 struct usb_request *req = dev->stat_req;
1145 struct usb_cdc_notification *event;
1151 * FIXME ugly idiom, maybe we'd be better with just
1152 * a "cancel the whole queue" primitive since any
1153 * unlink-one primitive has way too many error modes.
1154 * here, we "know" toggle is already clear...
1156 * FIXME iff req->context != null just dequeue it
1158 usb_ep_disable(dev->status_ep);
1159 usb_ep_enable(dev->status_ep, dev->status);
1162 * 3.8.1 says to issue first NETWORK_CONNECTION, then
1163 * a SPEED_CHANGE. could be useful in some configs.
1166 event->bmRequestType = 0xA1;
1167 event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
1168 event->wValue = __constant_cpu_to_le16(1); /* connected */
1169 event->wIndex = __constant_cpu_to_le16(1);
1172 req->length = sizeof *event;
1173 req->complete = eth_status_complete;
1176 value = usb_ep_queue(dev->status_ep, req, GFP_ATOMIC);
1178 debug("status buf queue --> %d\n", value);
1183 /*-------------------------------------------------------------------------*/
1185 static void eth_setup_complete(struct usb_ep *ep, struct usb_request *req)
1187 if (req->status || req->actual != req->length)
1188 debug("setup complete --> %d, %d/%d\n",
1189 req->status, req->actual, req->length);
1192 #ifdef CONFIG_USB_ETH_RNDIS
1194 static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req)
1196 if (req->status || req->actual != req->length)
1197 debug("rndis response complete --> %d, %d/%d\n",
1198 req->status, req->actual, req->length);
1200 /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */
1203 static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
1205 struct eth_dev *dev = ep->driver_data;
1208 /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
1209 status = rndis_msg_parser(dev->rndis_config, (u8 *) req->buf);
1211 error("%s: rndis parse error %d", __func__, status);
1217 * The setup() callback implements all the ep0 functionality that's not
1218 * handled lower down. CDC has a number of less-common features:
1220 * - two interfaces: control, and ethernet data
1221 * - Ethernet data interface has two altsettings: default, and active
1222 * - class-specific descriptors for the control interface
1223 * - class-specific control requests
1226 eth_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
1228 struct eth_dev *dev = get_gadget_data(gadget);
1229 struct usb_request *req = dev->req;
1230 int value = -EOPNOTSUPP;
1231 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1232 u16 wValue = le16_to_cpu(ctrl->wValue);
1233 u16 wLength = le16_to_cpu(ctrl->wLength);
1236 * descriptors just go into the pre-allocated ep0 buffer,
1237 * while config change events may enable network traffic.
1240 debug("%s\n", __func__);
1242 req->complete = eth_setup_complete;
1243 switch (ctrl->bRequest) {
1245 case USB_REQ_GET_DESCRIPTOR:
1246 if (ctrl->bRequestType != USB_DIR_IN)
1248 switch (wValue >> 8) {
1251 value = min(wLength, (u16) sizeof device_desc);
1252 memcpy(req->buf, &device_desc, value);
1254 case USB_DT_DEVICE_QUALIFIER:
1255 if (!gadget_is_dualspeed(gadget))
1257 value = min(wLength, (u16) sizeof dev_qualifier);
1258 memcpy(req->buf, &dev_qualifier, value);
1261 case USB_DT_OTHER_SPEED_CONFIG:
1262 if (!gadget_is_dualspeed(gadget))
1266 value = config_buf(gadget, req->buf,
1269 gadget_is_otg(gadget));
1271 value = min(wLength, (u16) value);
1275 value = usb_gadget_get_string(&stringtab,
1276 wValue & 0xff, req->buf);
1279 value = min(wLength, (u16) value);
1285 case USB_REQ_SET_CONFIGURATION:
1286 if (ctrl->bRequestType != 0)
1288 if (gadget->a_hnp_support)
1289 debug("HNP available\n");
1290 else if (gadget->a_alt_hnp_support)
1291 debug("HNP needs a different root port\n");
1292 value = eth_set_config(dev, wValue, GFP_ATOMIC);
1294 case USB_REQ_GET_CONFIGURATION:
1295 if (ctrl->bRequestType != USB_DIR_IN)
1297 *(u8 *)req->buf = dev->config;
1298 value = min(wLength, (u16) 1);
1301 case USB_REQ_SET_INTERFACE:
1302 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1306 if (!cdc_active(dev) && wIndex != 0)
1310 * PXA hardware partially handles SET_INTERFACE;
1311 * we need to kluge around that interference.
1313 if (gadget_is_pxa(gadget)) {
1314 value = eth_set_config(dev, DEV_CONFIG_VALUE,
1317 * PXA25x driver use non-CDC ethernet gadget.
1318 * But only _CDC and _RNDIS code can signalize
1319 * that network is working. So we signalize it
1322 l_ethdev.network_started = 1;
1323 debug("USB network up!\n");
1327 #ifdef CONFIG_USB_ETH_CDC
1329 case 0: /* control/master intf */
1333 usb_ep_disable(dev->status_ep);
1334 usb_ep_enable(dev->status_ep, dev->status);
1339 case 1: /* data intf */
1342 usb_ep_disable(dev->in_ep);
1343 usb_ep_disable(dev->out_ep);
1346 * CDC requires the data transfers not be done from
1347 * the default interface setting ... also, setting
1348 * the non-default interface resets filters etc.
1351 if (!cdc_active(dev))
1353 usb_ep_enable(dev->in_ep, dev->in);
1354 usb_ep_enable(dev->out_ep, dev->out);
1355 dev->cdc_filter = DEFAULT_FILTER;
1357 issue_start_status(dev);
1358 eth_start(dev, GFP_ATOMIC);
1365 * FIXME this is wrong, as is the assumption that
1366 * all non-PXA hardware talks real CDC ...
1368 debug("set_interface ignored!\n");
1369 #endif /* CONFIG_USB_ETH_CDC */
1373 case USB_REQ_GET_INTERFACE:
1374 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1378 if (!(cdc_active(dev) || rndis_active(dev)) && wIndex != 0)
1381 /* for CDC, iff carrier is on, data interface is active. */
1382 if (rndis_active(dev) || wIndex != 1)
1383 *(u8 *)req->buf = 0;
1385 /* *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0; */
1386 /* carrier always ok ...*/
1387 *(u8 *)req->buf = 1 ;
1389 value = min(wLength, (u16) 1);
1392 #ifdef CONFIG_USB_ETH_CDC
1393 case USB_CDC_SET_ETHERNET_PACKET_FILTER:
1395 * see 6.2.30: no data, wIndex = interface,
1396 * wValue = packet filter bitmap
1398 if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
1403 debug("packet filter %02x\n", wValue);
1404 dev->cdc_filter = wValue;
1410 * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
1411 * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
1412 * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
1413 * case USB_CDC_GET_ETHERNET_STATISTIC:
1416 #endif /* CONFIG_USB_ETH_CDC */
1418 #ifdef CONFIG_USB_ETH_RNDIS
1420 * RNDIS uses the CDC command encapsulation mechanism to implement
1421 * an RPC scheme, with much getting/setting of attributes by OID.
1423 case USB_CDC_SEND_ENCAPSULATED_COMMAND:
1424 if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
1425 || !rndis_active(dev)
1426 || wLength > USB_BUFSIZ
1428 || rndis_control_intf.bInterfaceNumber
1431 /* read the request, then process it */
1433 req->complete = rndis_command_complete;
1434 /* later, rndis_control_ack () sends a notification */
1437 case USB_CDC_GET_ENCAPSULATED_RESPONSE:
1438 if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)
1439 == ctrl->bRequestType
1440 && rndis_active(dev)
1441 /* && wLength >= 0x0400 */
1443 && rndis_control_intf.bInterfaceNumber
1448 /* return the result */
1449 buf = rndis_get_next_response(dev->rndis_config, &n);
1451 memcpy(req->buf, buf, n);
1452 req->complete = rndis_response_complete;
1453 rndis_free_response(dev->rndis_config, buf);
1456 /* else stalls ... spec says to avoid that */
1462 debug("unknown control req%02x.%02x v%04x i%04x l%d\n",
1463 ctrl->bRequestType, ctrl->bRequest,
1464 wValue, wIndex, wLength);
1467 /* respond with data transfer before status phase? */
1469 debug("respond with data transfer before status phase\n");
1470 req->length = value;
1471 req->zero = value < wLength
1472 && (value % gadget->ep0->maxpacket) == 0;
1473 value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1475 debug("ep_queue --> %d\n", value);
1477 eth_setup_complete(gadget->ep0, req);
1481 /* host either stalls (value < 0) or reports success */
1485 /*-------------------------------------------------------------------------*/
1487 static void rx_complete(struct usb_ep *ep, struct usb_request *req);
1489 static int rx_submit(struct eth_dev *dev, struct usb_request *req,
1492 int retval = -ENOMEM;
1496 * Padding up to RX_EXTRA handles minor disagreements with host.
1497 * Normally we use the USB "terminate on short read" convention;
1498 * so allow up to (N*maxpacket), since that memory is normally
1499 * already allocated. Some hardware doesn't deal well with short
1500 * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
1501 * byte off the end (to force hardware errors on overflow).
1503 * RNDIS uses internal framing, and explicitly allows senders to
1504 * pad to end-of-packet. That's potentially nice for speed,
1505 * but means receivers can't recover synch on their own.
1508 debug("%s\n", __func__);
1512 size = (ETHER_HDR_SIZE + dev->mtu + RX_EXTRA);
1513 size += dev->out_ep->maxpacket - 1;
1514 if (rndis_active(dev))
1515 size += sizeof(struct rndis_packet_msg_type);
1516 size -= size % dev->out_ep->maxpacket;
1519 * Some platforms perform better when IP packets are aligned,
1520 * but on at least one, checksumming fails otherwise. Note:
1521 * RNDIS headers involve variable numbers of LE32 values.
1524 req->buf = (u8 *) NetRxPackets[0];
1526 req->complete = rx_complete;
1528 retval = usb_ep_queue(dev->out_ep, req, gfp_flags);
1531 error("rx submit --> %d", retval);
1536 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
1538 struct eth_dev *dev = ep->driver_data;
1540 debug("%s: status %d\n", __func__, req->status);
1541 switch (req->status) {
1542 /* normal completion */
1544 if (rndis_active(dev)) {
1545 /* we know MaxPacketsPerTransfer == 1 here */
1546 int length = rndis_rm_hdr(req->buf, req->actual);
1549 req->length -= length;
1550 req->actual -= length;
1552 if (req->actual < ETH_HLEN || ETH_FRAME_LEN < req->actual) {
1554 dev->stats.rx_errors++;
1555 dev->stats.rx_length_errors++;
1556 debug("rx length %d\n", req->length);
1560 dev->stats.rx_packets++;
1561 dev->stats.rx_bytes += req->length;
1564 /* software-driven interface shutdown */
1565 case -ECONNRESET: /* unlink */
1566 case -ESHUTDOWN: /* disconnect etc */
1567 /* for hardware automagic (such as pxa) */
1568 case -ECONNABORTED: /* endpoint reset */
1573 dev->stats.rx_over_errors++;
1576 dev->stats.rx_errors++;
1580 packet_received = 1;
1583 static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
1586 dev->tx_req = usb_ep_alloc_request(dev->in_ep, 0);
1591 dev->rx_req = usb_ep_alloc_request(dev->out_ep, 0);
1599 usb_ep_free_request(dev->in_ep, dev->tx_req);
1601 error("can't alloc requests");
1605 static void tx_complete(struct usb_ep *ep, struct usb_request *req)
1607 struct eth_dev *dev = ep->driver_data;
1609 debug("%s: status %s\n", __func__, (req->status) ? "failed" : "ok");
1610 switch (req->status) {
1612 dev->stats.tx_errors++;
1613 debug("tx err %d\n", req->status);
1615 case -ECONNRESET: /* unlink */
1616 case -ESHUTDOWN: /* disconnect etc */
1619 dev->stats.tx_bytes += req->length;
1621 dev->stats.tx_packets++;
1626 static inline int eth_is_promisc(struct eth_dev *dev)
1628 /* no filters for the CDC subset; always promisc */
1629 if (subset_active(dev))
1631 return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
1635 static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
1637 struct eth_dev *dev = netdev_priv(net);
1638 int length = skb->len;
1640 struct usb_request *req = NULL;
1641 unsigned long flags;
1643 /* apply outgoing CDC or RNDIS filters */
1644 if (!eth_is_promisc (dev)) {
1645 u8 *dest = skb->data;
1647 if (is_multicast_ether_addr(dest)) {
1650 /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
1651 * SET_ETHERNET_MULTICAST_FILTERS requests
1653 if (is_broadcast_ether_addr(dest))
1654 type = USB_CDC_PACKET_TYPE_BROADCAST;
1656 type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
1657 if (!(dev->cdc_filter & type)) {
1658 dev_kfree_skb_any (skb);
1662 /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
1665 spin_lock_irqsave(&dev->req_lock, flags);
1667 * this freelist can be empty if an interrupt triggered disconnect()
1668 * and reconfigured the gadget (shutting down this queue) after the
1669 * network stack decided to xmit but before we got the spinlock.
1671 if (list_empty(&dev->tx_reqs)) {
1672 spin_unlock_irqrestore(&dev->req_lock, flags);
1676 req = container_of (dev->tx_reqs.next, struct usb_request, list);
1677 list_del (&req->list);
1679 /* temporarily stop TX queue when the freelist empties */
1680 if (list_empty (&dev->tx_reqs))
1681 netif_stop_queue (net);
1682 spin_unlock_irqrestore(&dev->req_lock, flags);
1684 /* no buffer copies needed, unless the network stack did it
1685 * or the hardware can't use skb buffers.
1686 * or there's not enough space for any RNDIS headers we need
1688 if (rndis_active(dev)) {
1689 struct sk_buff *skb_rndis;
1691 skb_rndis = skb_realloc_headroom (skb,
1692 sizeof (struct rndis_packet_msg_type));
1696 dev_kfree_skb_any (skb);
1698 rndis_add_hdr (skb);
1701 req->buf = skb->data;
1703 req->complete = tx_complete;
1705 /* use zlp framing on tx for strict CDC-Ether conformance,
1706 * though any robust network rx path ignores extra padding.
1707 * and some hardware doesn't like to write zlps.
1710 if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
1713 req->length = length;
1715 /* throttle highspeed IRQ rate back slightly */
1716 if (gadget_is_dualspeed(dev->gadget))
1717 req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
1718 ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
1721 retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
1724 DEBUG (dev, "tx queue err %d\n", retval);
1727 net->trans_start = jiffies;
1728 atomic_inc (&dev->tx_qlen);
1733 dev->stats.tx_dropped++;
1734 dev_kfree_skb_any (skb);
1735 spin_lock_irqsave(&dev->req_lock, flags);
1736 if (list_empty (&dev->tx_reqs))
1737 netif_start_queue (net);
1738 list_add (&req->list, &dev->tx_reqs);
1739 spin_unlock_irqrestore(&dev->req_lock, flags);
1744 /*-------------------------------------------------------------------------*/
1747 static void eth_unbind(struct usb_gadget *gadget)
1749 struct eth_dev *dev = get_gadget_data(gadget);
1751 debug("%s...\n", __func__);
1752 rndis_deregister(dev->rndis_config);
1755 /* we've already been disconnected ... no i/o is active */
1757 usb_ep_free_request(gadget->ep0, dev->req);
1760 if (dev->stat_req) {
1761 usb_ep_free_request(dev->status_ep, dev->stat_req);
1762 dev->stat_req = NULL;
1766 usb_ep_free_request(dev->in_ep, dev->tx_req);
1771 usb_ep_free_request(dev->out_ep, dev->rx_req);
1775 /* unregister_netdev (dev->net);*/
1776 /* free_netdev(dev->net);*/
1779 set_gadget_data(gadget, NULL);
1782 static void eth_disconnect(struct usb_gadget *gadget)
1784 eth_reset_config(get_gadget_data(gadget));
1785 /* FIXME RNDIS should enter RNDIS_UNINITIALIZED */
1788 static void eth_suspend(struct usb_gadget *gadget)
1793 static void eth_resume(struct usb_gadget *gadget)
1798 /*-------------------------------------------------------------------------*/
1800 #ifdef CONFIG_USB_ETH_RNDIS
1803 * The interrupt endpoint is used in RNDIS to notify the host when messages
1804 * other than data packets are available ... notably the REMOTE_NDIS_*_CMPLT
1805 * messages, but also REMOTE_NDIS_INDICATE_STATUS_MSG and potentially even
1806 * REMOTE_NDIS_KEEPALIVE_MSG.
1808 * The RNDIS control queue is processed by GET_ENCAPSULATED_RESPONSE, and
1809 * normally just one notification will be queued.
1812 static void rndis_control_ack_complete(struct usb_ep *ep,
1813 struct usb_request *req)
1815 struct eth_dev *dev = ep->driver_data;
1817 debug("%s...\n", __func__);
1818 if (req->status || req->actual != req->length)
1819 debug("rndis control ack complete --> %d, %d/%d\n",
1820 req->status, req->actual, req->length);
1822 if (!l_ethdev.network_started) {
1823 if (rndis_get_state(dev->rndis_config)
1824 == RNDIS_DATA_INITIALIZED) {
1825 l_ethdev.network_started = 1;
1826 printf("USB RNDIS network up!\n");
1830 req->context = NULL;
1832 if (req != dev->stat_req)
1833 usb_ep_free_request(ep, req);
1836 static char rndis_resp_buf[8] __attribute__((aligned(sizeof(__le32))));
1838 static int rndis_control_ack(struct eth_device *net)
1840 struct eth_dev *dev = &l_ethdev;
1842 struct usb_request *resp = dev->stat_req;
1844 /* in case RNDIS calls this after disconnect */
1846 debug("status ENODEV\n");
1850 /* in case queue length > 1 */
1851 if (resp->context) {
1852 resp = usb_ep_alloc_request(dev->status_ep, GFP_ATOMIC);
1855 resp->buf = rndis_resp_buf;
1859 * Send RNDIS RESPONSE_AVAILABLE notification;
1860 * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too
1863 resp->complete = rndis_control_ack_complete;
1864 resp->context = dev;
1866 *((__le32 *) resp->buf) = __constant_cpu_to_le32(1);
1867 *((__le32 *) (resp->buf + 4)) = __constant_cpu_to_le32(0);
1869 length = usb_ep_queue(dev->status_ep, resp, GFP_ATOMIC);
1872 rndis_control_ack_complete(dev->status_ep, resp);
1880 #define rndis_control_ack NULL
1884 static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
1886 if (rndis_active(dev)) {
1887 rndis_set_param_medium(dev->rndis_config,
1889 BITRATE(dev->gadget)/100);
1890 rndis_signal_connect(dev->rndis_config);
1894 static int eth_stop(struct eth_dev *dev)
1896 #ifdef RNDIS_COMPLETE_SIGNAL_DISCONNECT
1898 unsigned long timeout = CONFIG_SYS_HZ; /* 1 sec to stop RNDIS */
1901 if (rndis_active(dev)) {
1902 rndis_set_param_medium(dev->rndis_config, NDIS_MEDIUM_802_3, 0);
1903 rndis_signal_disconnect(dev->rndis_config);
1905 #ifdef RNDIS_COMPLETE_SIGNAL_DISCONNECT
1906 /* Wait until host receives OID_GEN_MEDIA_CONNECT_STATUS */
1908 while (get_timer(ts) < timeout)
1909 usb_gadget_handle_interrupts();
1912 rndis_uninit(dev->rndis_config);
1919 /*-------------------------------------------------------------------------*/
1921 static int is_eth_addr_valid(char *str)
1923 if (strlen(str) == 17) {
1928 /* see if it looks like an ethernet address */
1932 for (i = 0; i < 6; i++) {
1933 char term = (i == 5 ? '\0' : ':');
1935 ea[i] = simple_strtol(p, &q, 16);
1937 if ((q - p) != 2 || *q++ != term)
1943 /* Now check the contents. */
1944 return is_valid_ether_addr(ea);
1949 static u8 nibble(unsigned char c)
1951 if (likely(isdigit(c)))
1954 if (likely(isxdigit(c)))
1955 return 10 + c - 'A';
1959 static int get_ether_addr(const char *str, u8 *dev_addr)
1964 for (i = 0; i < 6; i++) {
1967 if ((*str == '.') || (*str == ':'))
1969 num = nibble(*str++) << 4;
1970 num |= (nibble(*str++));
1973 if (is_valid_ether_addr(dev_addr))
1979 static int eth_bind(struct usb_gadget *gadget)
1981 struct eth_dev *dev = &l_ethdev;
1982 u8 cdc = 1, zlp = 1, rndis = 1;
1983 struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
1984 int status = -ENOMEM;
1988 /* these flags are only ever cleared; compiler take note */
1989 #ifndef CONFIG_USB_ETH_CDC
1992 #ifndef CONFIG_USB_ETH_RNDIS
1996 * Because most host side USB stacks handle CDC Ethernet, that
1997 * standard protocol is _strongly_ preferred for interop purposes.
1998 * (By everyone except Microsoft.)
2000 if (gadget_is_pxa(gadget)) {
2001 /* pxa doesn't support altsettings */
2003 } else if (gadget_is_musbhdrc(gadget)) {
2004 /* reduce tx dma overhead by avoiding special cases */
2006 } else if (gadget_is_sh(gadget)) {
2007 /* sh doesn't support multiple interfaces or configs */
2010 } else if (gadget_is_sa1100(gadget)) {
2011 /* hardware can't write zlps */
2014 * sa1100 CAN do CDC, without status endpoint ... we use
2015 * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
2020 gcnum = usb_gadget_controller_number(gadget);
2022 device_desc.bcdDevice = cpu_to_le16(0x0300 + gcnum);
2025 * can't assume CDC works. don't want to default to
2026 * anything less functional on CDC-capable hardware,
2027 * so we fail in this case.
2029 error("controller '%s' not recognized",
2035 * If there's an RNDIS configuration, that's what Windows wants to
2036 * be using ... so use these product IDs here and in the "linux.inf"
2037 * needed to install MSFT drivers. Current Linux kernels will use
2038 * the second configuration if it's CDC Ethernet, and need some help
2039 * to choose the right configuration otherwise.
2042 #if defined(CONFIG_USB_RNDIS_VENDOR_ID) && defined(CONFIG_USB_RNDIS_PRODUCT_ID)
2043 device_desc.idVendor =
2044 __constant_cpu_to_le16(CONFIG_USB_RNDIS_VENDOR_ID);
2045 device_desc.idProduct =
2046 __constant_cpu_to_le16(CONFIG_USB_RNDIS_PRODUCT_ID);
2048 device_desc.idVendor =
2049 __constant_cpu_to_le16(RNDIS_VENDOR_NUM);
2050 device_desc.idProduct =
2051 __constant_cpu_to_le16(RNDIS_PRODUCT_NUM);
2053 sprintf(product_desc, "RNDIS/%s", driver_desc);
2056 * CDC subset ... recognized by Linux since 2.4.10, but Windows
2057 * drivers aren't widely available. (That may be improved by
2058 * supporting one submode of the "SAFE" variant of MDLM.)
2061 #if defined(CONFIG_USB_CDC_VENDOR_ID) && defined(CONFIG_USB_CDC_PRODUCT_ID)
2062 device_desc.idVendor = cpu_to_le16(CONFIG_USB_CDC_VENDOR_ID);
2063 device_desc.idProduct = cpu_to_le16(CONFIG_USB_CDC_PRODUCT_ID);
2066 device_desc.idVendor =
2067 __constant_cpu_to_le16(SIMPLE_VENDOR_NUM);
2068 device_desc.idProduct =
2069 __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM);
2073 /* support optional vendor/distro customization */
2075 device_desc.bcdDevice = cpu_to_le16(bcdDevice);
2077 strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
2079 strlcpy(product_desc, iProduct, sizeof product_desc);
2080 if (iSerialNumber) {
2081 device_desc.iSerialNumber = STRING_SERIALNUMBER,
2082 strlcpy(serial_number, iSerialNumber, sizeof serial_number);
2085 /* all we really need is bulk IN/OUT */
2086 usb_ep_autoconfig_reset(gadget);
2087 in_ep = usb_ep_autoconfig(gadget, &fs_source_desc);
2090 error("can't autoconfigure on %s\n",
2094 in_ep->driver_data = in_ep; /* claim */
2096 out_ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
2099 out_ep->driver_data = out_ep; /* claim */
2101 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
2103 * CDC Ethernet control interface doesn't require a status endpoint.
2104 * Since some hosts expect one, try to allocate one anyway.
2107 status_ep = usb_ep_autoconfig(gadget, &fs_status_desc);
2109 status_ep->driver_data = status_ep; /* claim */
2111 error("can't run RNDIS on %s", gadget->name);
2113 #ifdef CONFIG_USB_ETH_CDC
2115 control_intf.bNumEndpoints = 0;
2116 /* FIXME remove endpoint from descriptor list */
2122 /* one config: cdc, else minimal subset */
2124 eth_config.bNumInterfaces = 1;
2125 eth_config.iConfiguration = STRING_SUBSET;
2128 * use functions to set these up, in case we're built to work
2129 * with multiple controllers and must override CDC Ethernet.
2131 fs_subset_descriptors();
2132 hs_subset_descriptors();
2135 device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
2136 usb_gadget_set_selfpowered(gadget);
2138 /* For now RNDIS is always a second config */
2140 device_desc.bNumConfigurations = 2;
2142 if (gadget_is_dualspeed(gadget)) {
2144 dev_qualifier.bNumConfigurations = 2;
2146 dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
2148 /* assumes ep0 uses the same value for both speeds ... */
2149 dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
2151 /* and that all endpoints are dual-speed */
2152 hs_source_desc.bEndpointAddress =
2153 fs_source_desc.bEndpointAddress;
2154 hs_sink_desc.bEndpointAddress =
2155 fs_sink_desc.bEndpointAddress;
2156 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
2158 hs_status_desc.bEndpointAddress =
2159 fs_status_desc.bEndpointAddress;
2163 if (gadget_is_otg(gadget)) {
2164 otg_descriptor.bmAttributes |= USB_OTG_HNP,
2165 eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
2166 eth_config.bMaxPower = 4;
2167 #ifdef CONFIG_USB_ETH_RNDIS
2168 rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
2169 rndis_config.bMaxPower = 4;
2174 /* network device setup */
2175 dev->net = &l_netdev;
2181 dev->out_ep = out_ep;
2182 dev->status_ep = status_ep;
2185 * Module params for these addresses should come from ID proms.
2186 * The host side address is used with CDC and RNDIS, and commonly
2187 * ends up in a persistent config database. It's not clear if
2188 * host side code for the SAFE thing cares -- its original BLAN
2189 * thing didn't, Sharp never assigned those addresses on Zaurii.
2191 get_ether_addr(dev_addr, dev->net->enetaddr);
2193 memset(tmp, 0, sizeof(tmp));
2194 memcpy(tmp, dev->net->enetaddr, sizeof(dev->net->enetaddr));
2196 get_ether_addr(host_addr, dev->host_mac);
2198 sprintf(ethaddr, "%02X%02X%02X%02X%02X%02X",
2199 dev->host_mac[0], dev->host_mac[1],
2200 dev->host_mac[2], dev->host_mac[3],
2201 dev->host_mac[4], dev->host_mac[5]);
2204 status = rndis_init();
2206 error("can't init RNDIS, %d", status);
2212 * use PKTSIZE (or aligned... from u-boot) and set
2213 * wMaxSegmentSize accordingly
2215 dev->mtu = PKTSIZE_ALIGN; /* RNDIS does not like this, only 1514, TODO*/
2217 /* preallocate control message data and buffer */
2218 dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
2221 dev->req->buf = control_req;
2222 dev->req->complete = eth_setup_complete;
2224 /* ... and maybe likewise for status transfer */
2225 #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS)
2226 if (dev->status_ep) {
2227 dev->stat_req = usb_ep_alloc_request(dev->status_ep,
2229 if (!dev->stat_req) {
2230 usb_ep_free_request(dev->status_ep, dev->req);
2234 dev->stat_req->buf = status_req;
2235 dev->stat_req->context = NULL;
2239 /* finish hookup to lower layer ... */
2240 dev->gadget = gadget;
2241 set_gadget_data(gadget, dev);
2242 gadget->ep0->driver_data = dev;
2245 * two kinds of host-initiated state changes:
2246 * - iff DATA transfer is active, carrier is "on"
2247 * - tx queueing enabled if open *and* carrier is "on"
2250 printf("using %s, OUT %s IN %s%s%s\n", gadget->name,
2251 out_ep->name, in_ep->name,
2252 status_ep ? " STATUS " : "",
2253 status_ep ? status_ep->name : ""
2255 printf("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
2256 dev->net->enetaddr[0], dev->net->enetaddr[1],
2257 dev->net->enetaddr[2], dev->net->enetaddr[3],
2258 dev->net->enetaddr[4], dev->net->enetaddr[5]);
2261 printf("HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
2262 dev->host_mac[0], dev->host_mac[1],
2263 dev->host_mac[2], dev->host_mac[3],
2264 dev->host_mac[4], dev->host_mac[5]);
2269 /* FIXME RNDIS vendor id == "vendor NIC code" == ? */
2271 dev->rndis_config = rndis_register(rndis_control_ack);
2272 if (dev->rndis_config < 0) {
2275 debug("RNDIS setup failed\n");
2280 /* these set up a lot of the OIDs that RNDIS needs */
2281 rndis_set_host_mac(dev->rndis_config, dev->host_mac);
2282 if (rndis_set_param_dev(dev->rndis_config, dev->net, dev->mtu,
2283 &dev->stats, &dev->cdc_filter))
2285 if (rndis_set_param_vendor(dev->rndis_config, vendorID,
2288 if (rndis_set_param_medium(dev->rndis_config,
2289 NDIS_MEDIUM_802_3, 0))
2291 printf("RNDIS ready\n");
2296 error("%s failed, status = %d", __func__, status);
2301 /*-------------------------------------------------------------------------*/
2303 static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
2305 struct eth_dev *dev = &l_ethdev;
2306 struct usb_gadget *gadget;
2308 unsigned long timeout = USB_CONNECT_TIMEOUT;
2311 error("received NULL ptr");
2315 /* Configure default mac-addresses for the USB ethernet device */
2316 #ifdef CONFIG_USBNET_DEV_ADDR
2317 strlcpy(dev_addr, CONFIG_USBNET_DEV_ADDR, sizeof(dev_addr));
2319 #ifdef CONFIG_USBNET_HOST_ADDR
2320 strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
2322 /* Check if the user overruled the MAC addresses */
2323 if (getenv("usbnet_devaddr"))
2324 strlcpy(dev_addr, getenv("usbnet_devaddr"),
2327 if (getenv("usbnet_hostaddr"))
2328 strlcpy(host_addr, getenv("usbnet_hostaddr"),
2331 if (!is_eth_addr_valid(dev_addr)) {
2332 error("Need valid 'usbnet_devaddr' to be set");
2335 if (!is_eth_addr_valid(host_addr)) {
2336 error("Need valid 'usbnet_hostaddr' to be set");
2340 if (usb_gadget_register_driver(ð_driver) < 0)
2343 dev->network_started = 0;
2345 packet_received = 0;
2348 gadget = dev->gadget;
2349 usb_gadget_connect(gadget);
2351 if (getenv("cdc_connect_timeout"))
2352 timeout = simple_strtoul(getenv("cdc_connect_timeout"),
2353 NULL, 10) * CONFIG_SYS_HZ;
2355 while (!l_ethdev.network_started) {
2356 /* Handle control-c and timeouts */
2357 if (ctrlc() || (get_timer(ts) > timeout)) {
2358 error("The remote end did not respond in time.");
2361 usb_gadget_handle_interrupts();
2364 packet_received = 0;
2365 rx_submit(dev, dev->rx_req, 0);
2371 static int usb_eth_send(struct eth_device *netdev, void *packet, int length)
2374 void *rndis_pkt = NULL;
2375 struct eth_dev *dev = &l_ethdev;
2376 struct usb_request *req = dev->tx_req;
2378 unsigned long timeout = USB_CONNECT_TIMEOUT;
2380 debug("%s:...\n", __func__);
2382 /* new buffer is needed to include RNDIS header */
2383 if (rndis_active(dev)) {
2384 rndis_pkt = malloc(length +
2385 sizeof(struct rndis_packet_msg_type));
2387 error("No memory to alloc RNDIS packet");
2390 rndis_add_hdr(rndis_pkt, length);
2391 memcpy(rndis_pkt + sizeof(struct rndis_packet_msg_type),
2394 length += sizeof(struct rndis_packet_msg_type);
2397 req->context = NULL;
2398 req->complete = tx_complete;
2401 * use zlp framing on tx for strict CDC-Ether conformance,
2402 * though any robust network rx path ignores extra padding.
2403 * and some hardware doesn't like to write zlps.
2406 if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
2409 req->length = length;
2411 /* throttle highspeed IRQ rate back slightly */
2412 if (gadget_is_dualspeed(dev->gadget))
2413 req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
2414 ? ((dev->tx_qlen % qmult) != 0) : 0;
2420 retval = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
2423 debug("%s: packet queued\n", __func__);
2424 while (!packet_sent) {
2425 if (get_timer(ts) > timeout) {
2426 printf("timeout sending packets to usb ethernet\n");
2429 usb_gadget_handle_interrupts();
2436 dev->stats.tx_dropped++;
2440 static int usb_eth_recv(struct eth_device *netdev)
2442 struct eth_dev *dev = &l_ethdev;
2444 usb_gadget_handle_interrupts();
2446 if (packet_received) {
2447 debug("%s: packet received\n", __func__);
2449 NetReceive(NetRxPackets[0], dev->rx_req->length);
2450 packet_received = 0;
2452 rx_submit(dev, dev->rx_req, 0);
2454 error("dev->rx_req invalid");
2459 void usb_eth_halt(struct eth_device *netdev)
2461 struct eth_dev *dev = &l_ethdev;
2464 error("received NULL ptr");
2468 /* If the gadget not registered, simple return */
2473 * Some USB controllers may need additional deinitialization here
2474 * before dropping pull-up (also due to hardware issues).
2475 * For example: unhandled interrupt with status stage started may
2476 * bring the controller to fully broken state (until board reset).
2477 * There are some variants to debug and fix such cases:
2478 * 1) In the case of RNDIS connection eth_stop can perform additional
2479 * interrupt handling. See RNDIS_COMPLETE_SIGNAL_DISCONNECT definition.
2480 * 2) 'pullup' callback in your UDC driver can be improved to perform
2481 * this deinitialization.
2485 usb_gadget_disconnect(dev->gadget);
2487 /* Clear pending interrupt */
2488 if (dev->network_started) {
2489 usb_gadget_handle_interrupts();
2490 dev->network_started = 0;
2493 usb_gadget_unregister_driver(ð_driver);
2496 static struct usb_gadget_driver eth_driver = {
2500 .unbind = eth_unbind,
2503 .disconnect = eth_disconnect,
2505 .suspend = eth_suspend,
2506 .resume = eth_resume,
2509 int usb_eth_initialize(bd_t *bi)
2511 struct eth_device *netdev = &l_netdev;
2513 strlcpy(netdev->name, USB_NET_NAME, sizeof(netdev->name));
2515 netdev->init = usb_eth_init;
2516 netdev->send = usb_eth_send;
2517 netdev->recv = usb_eth_recv;
2518 netdev->halt = usb_eth_halt;
2520 #ifdef CONFIG_MCAST_TFTP
2521 #error not supported
2523 eth_register(netdev);