Linux-libre 5.3.12-gnu
[librecmc/linux-libre.git] / drivers / uio / uio_pdrv_genirq.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/uio/uio_pdrv_genirq.c
4  *
5  * Userspace I/O platform driver with generic IRQ handling code.
6  *
7  * Copyright (C) 2008 Magnus Damm
8  *
9  * Based on uio_pdrv.c by Uwe Kleine-Koenig,
10  * Copyright (C) 2008 by Digi International Inc.
11  * All rights reserved.
12  */
13
14 #include <linux/platform_device.h>
15 #include <linux/uio_driver.h>
16 #include <linux/spinlock.h>
17 #include <linux/bitops.h>
18 #include <linux/module.h>
19 #include <linux/interrupt.h>
20 #include <linux/stringify.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/slab.h>
23
24 #include <linux/of.h>
25 #include <linux/of_platform.h>
26 #include <linux/of_address.h>
27
28 #define DRIVER_NAME "uio_pdrv_genirq"
29
30 struct uio_pdrv_genirq_platdata {
31         struct uio_info *uioinfo;
32         spinlock_t lock;
33         unsigned long flags;
34         struct platform_device *pdev;
35 };
36
37 /* Bits in uio_pdrv_genirq_platdata.flags */
38 enum {
39         UIO_IRQ_DISABLED = 0,
40 };
41
42 static int uio_pdrv_genirq_open(struct uio_info *info, struct inode *inode)
43 {
44         struct uio_pdrv_genirq_platdata *priv = info->priv;
45
46         /* Wait until the Runtime PM code has woken up the device */
47         pm_runtime_get_sync(&priv->pdev->dev);
48         return 0;
49 }
50
51 static int uio_pdrv_genirq_release(struct uio_info *info, struct inode *inode)
52 {
53         struct uio_pdrv_genirq_platdata *priv = info->priv;
54
55         /* Tell the Runtime PM code that the device has become idle */
56         pm_runtime_put_sync(&priv->pdev->dev);
57         return 0;
58 }
59
60 static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
61 {
62         struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
63
64         /* Just disable the interrupt in the interrupt controller, and
65          * remember the state so we can allow user space to enable it later.
66          */
67
68         spin_lock(&priv->lock);
69         if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
70                 disable_irq_nosync(irq);
71         spin_unlock(&priv->lock);
72
73         return IRQ_HANDLED;
74 }
75
76 static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
77 {
78         struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
79         unsigned long flags;
80
81         /* Allow user space to enable and disable the interrupt
82          * in the interrupt controller, but keep track of the
83          * state to prevent per-irq depth damage.
84          *
85          * Serialize this operation to support multiple tasks and concurrency
86          * with irq handler on SMP systems.
87          */
88
89         spin_lock_irqsave(&priv->lock, flags);
90         if (irq_on) {
91                 if (__test_and_clear_bit(UIO_IRQ_DISABLED, &priv->flags))
92                         enable_irq(dev_info->irq);
93         } else {
94                 if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
95                         disable_irq_nosync(dev_info->irq);
96         }
97         spin_unlock_irqrestore(&priv->lock, flags);
98
99         return 0;
100 }
101
102 static int uio_pdrv_genirq_probe(struct platform_device *pdev)
103 {
104         struct uio_info *uioinfo = dev_get_platdata(&pdev->dev);
105         struct uio_pdrv_genirq_platdata *priv;
106         struct uio_mem *uiomem;
107         int ret = -EINVAL;
108         int i;
109
110         if (pdev->dev.of_node) {
111                 /* alloc uioinfo for one device */
112                 uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo),
113                                        GFP_KERNEL);
114                 if (!uioinfo) {
115                         dev_err(&pdev->dev, "unable to kmalloc\n");
116                         return -ENOMEM;
117                 }
118                 uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn",
119                                                pdev->dev.of_node);
120                 uioinfo->version = "devicetree";
121                 /* Multiple IRQs are not supported */
122         }
123
124         if (!uioinfo || !uioinfo->name || !uioinfo->version) {
125                 dev_err(&pdev->dev, "missing platform_data\n");
126                 return ret;
127         }
128
129         if (uioinfo->handler || uioinfo->irqcontrol ||
130             uioinfo->irq_flags & IRQF_SHARED) {
131                 dev_err(&pdev->dev, "interrupt configuration error\n");
132                 return ret;
133         }
134
135         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
136         if (!priv) {
137                 dev_err(&pdev->dev, "unable to kmalloc\n");
138                 return -ENOMEM;
139         }
140
141         priv->uioinfo = uioinfo;
142         spin_lock_init(&priv->lock);
143         priv->flags = 0; /* interrupt is enabled to begin with */
144         priv->pdev = pdev;
145
146         if (!uioinfo->irq) {
147                 ret = platform_get_irq(pdev, 0);
148                 uioinfo->irq = ret;
149                 if (ret == -ENXIO && pdev->dev.of_node)
150                         uioinfo->irq = UIO_IRQ_NONE;
151                 else if (ret < 0) {
152                         dev_err(&pdev->dev, "failed to get IRQ\n");
153                         return ret;
154                 }
155         }
156
157         uiomem = &uioinfo->mem[0];
158
159         for (i = 0; i < pdev->num_resources; ++i) {
160                 struct resource *r = &pdev->resource[i];
161
162                 if (r->flags != IORESOURCE_MEM)
163                         continue;
164
165                 if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
166                         dev_warn(&pdev->dev, "device has more than "
167                                         __stringify(MAX_UIO_MAPS)
168                                         " I/O memory resources.\n");
169                         break;
170                 }
171
172                 uiomem->memtype = UIO_MEM_PHYS;
173                 uiomem->addr = r->start;
174                 uiomem->size = resource_size(r);
175                 uiomem->name = r->name;
176                 ++uiomem;
177         }
178
179         while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
180                 uiomem->size = 0;
181                 ++uiomem;
182         }
183
184         /* This driver requires no hardware specific kernel code to handle
185          * interrupts. Instead, the interrupt handler simply disables the
186          * interrupt in the interrupt controller. User space is responsible
187          * for performing hardware specific acknowledge and re-enabling of
188          * the interrupt in the interrupt controller.
189          *
190          * Interrupt sharing is not supported.
191          */
192
193         uioinfo->handler = uio_pdrv_genirq_handler;
194         uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
195         uioinfo->open = uio_pdrv_genirq_open;
196         uioinfo->release = uio_pdrv_genirq_release;
197         uioinfo->priv = priv;
198
199         /* Enable Runtime PM for this device:
200          * The device starts in suspended state to allow the hardware to be
201          * turned off by default. The Runtime PM bus code should power on the
202          * hardware and enable clocks at open().
203          */
204         pm_runtime_enable(&pdev->dev);
205
206         ret = uio_register_device(&pdev->dev, priv->uioinfo);
207         if (ret) {
208                 dev_err(&pdev->dev, "unable to register uio device\n");
209                 pm_runtime_disable(&pdev->dev);
210                 return ret;
211         }
212
213         platform_set_drvdata(pdev, priv);
214         return 0;
215 }
216
217 static int uio_pdrv_genirq_remove(struct platform_device *pdev)
218 {
219         struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
220
221         uio_unregister_device(priv->uioinfo);
222         pm_runtime_disable(&pdev->dev);
223
224         priv->uioinfo->handler = NULL;
225         priv->uioinfo->irqcontrol = NULL;
226
227         return 0;
228 }
229
230 static int uio_pdrv_genirq_runtime_nop(struct device *dev)
231 {
232         /* Runtime PM callback shared between ->runtime_suspend()
233          * and ->runtime_resume(). Simply returns success.
234          *
235          * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
236          * are used at open() and release() time. This allows the
237          * Runtime PM code to turn off power to the device while the
238          * device is unused, ie before open() and after release().
239          *
240          * This Runtime PM callback does not need to save or restore
241          * any registers since user space is responsbile for hardware
242          * register reinitialization after open().
243          */
244         return 0;
245 }
246
247 static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
248         .runtime_suspend = uio_pdrv_genirq_runtime_nop,
249         .runtime_resume = uio_pdrv_genirq_runtime_nop,
250 };
251
252 #ifdef CONFIG_OF
253 static struct of_device_id uio_of_genirq_match[] = {
254         { /* This is filled with module_parm */ },
255         { /* Sentinel */ },
256 };
257 MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
258 module_param_string(of_id, uio_of_genirq_match[0].compatible, 128, 0);
259 MODULE_PARM_DESC(of_id, "Openfirmware id of the device to be handled by uio");
260 #endif
261
262 static struct platform_driver uio_pdrv_genirq = {
263         .probe = uio_pdrv_genirq_probe,
264         .remove = uio_pdrv_genirq_remove,
265         .driver = {
266                 .name = DRIVER_NAME,
267                 .pm = &uio_pdrv_genirq_dev_pm_ops,
268                 .of_match_table = of_match_ptr(uio_of_genirq_match),
269         },
270 };
271
272 module_platform_driver(uio_pdrv_genirq);
273
274 MODULE_AUTHOR("Magnus Damm");
275 MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
276 MODULE_LICENSE("GPL v2");
277 MODULE_ALIAS("platform:" DRIVER_NAME);