1 // SPDX-License-Identifier: GPL-2.0+
4 * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
12 #include "sysreset_mpc83xx.h"
14 /* Magic 4-byte word to enable reset ('RSTE' in ASCII) */
15 static const u32 RPR_MAGIC = 0x52535445;
16 /* Wait at most 2000ms for reset control enable bit */
17 static const uint RESET_WAIT_TIMEOUT = 2000;
20 * __do_reset() - Execute the system reset
22 * Return: The functions resets the system, and never returns.
24 static int __do_reset(void)
29 immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
31 puts("Resetting the board.\n");
33 /* Interrupts and MMU off */
35 msr &= ~(MSR_EE | MSR_IR | MSR_DR);
38 /* Enable Reset Control Reg */
39 out_be32(&immap->reset.rpr, RPR_MAGIC);
43 /* Confirm Reset Control Reg is enabled */
44 res = wait_for_bit_be32(&immap->reset.rcer, RCER_CRE, true,
45 RESET_WAIT_TIMEOUT, false);
47 debug("%s: Timed out waiting for reset control to be set\n",
54 /* Perform reset, only one bit */
55 out_be32(&immap->reset.rcr, RCR_SWHR);
61 static int mpc83xx_sysreset_request(struct udevice *dev, enum sysreset_t type)
68 return -EPROTONOSUPPORT;
75 * print_83xx_arb_event() - Print arbiter events to buffer
76 * @force: Print arbiter events, even if none are indicated by the system
77 * @buf: The buffer to receive the printed arbiter event information
78 * @size: The size of the buffer to receive the printed arbiter event
79 * information in bytes
81 * Return: Number of bytes printed to buffer, -ve on error
83 static int print_83xx_arb_event(bool force, char *buf, int size)
85 int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
87 int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
88 >> AEATR_MSTR_ID_SHIFT;
89 int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
91 int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
93 int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
95 int tsize_val = (tbst << 3) | tsize;
96 int tsize_bytes = tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize;
100 * If we don't force output, and there is no event (event address ==
101 * 0), then don't print anything
103 if (!force && !gd->arch.arbiter_event_address)
106 if (CONFIG_IS_ENABLED(CONFIG_DISPLAY_AER_FULL)) {
107 res = snprintf(buf, size,
108 "Arbiter Event Status:\n"
112 " %s: 0x%1x = %d bytes\n"
113 " %s: 0x%02x = %s\n",
114 "Event Address", gd->arch.arbiter_event_address,
115 "Event Type", etype, event[etype],
116 "Master ID", mstr_id, master[mstr_id],
117 "Transfer Size", tsize_val, tsize_bytes,
118 "Transfer Type", ttype, transfer[ttype]);
119 } else if (CONFIG_IS_ENABLED(CONFIG_DISPLAY_AER_BRIEF)) {
120 res = snprintf(buf, size,
121 "Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
122 gd->arch.arbiter_event_attributes,
123 gd->arch.arbiter_event_address);
129 static int mpc83xx_sysreset_get_status(struct udevice *dev, char *buf, int size)
131 /* Ad-hoc data structure to map RSR bit values to their descriptions */
132 static const struct {
133 /* Bit mask for the bit in question */
135 /* Description of the bitmask in question */
139 RSR_SWSR, "Software Soft"}, {
140 RSR_SWHR, "Software Hard"}, {
141 RSR_JSRS, "JTAG Soft"}, {
142 RSR_CSHR, "Check Stop"}, {
143 RSR_SWRS, "Software Watchdog"}, {
144 RSR_BMRS, "Bus Monitor"}, {
145 RSR_SRS, "External/Internal Soft"}, {
146 RSR_HRS, "External/Internal Hard"}
149 ulong rsr = gd->arch.reset_status;
153 res = snprintf(buf, size, "Reset Status:");
155 debug("%s: Could not write reset status message (err = %d)\n",
164 for (i = 0; i < ARRAY_SIZE(bits); i++)
165 /* Print description of set bits */
166 if (rsr & bits[i].mask) {
167 res = snprintf(buf, size, "%s%s%s", sep, bits[i].desc,
168 (i == ARRAY_SIZE(bits) - 1) ? "\n" : "");
170 debug("%s: Could not write reset status message (err = %d)\n",
180 * TODO(mario.six@gdsys.cc): Move this into a dedicated
183 if (CONFIG_IS_ENABLED(CONFIG_DISPLAY_AER_FULL) ||
184 CONFIG_IS_ENABLED(CONFIG_DISPLAY_AER_BRIEF)) {
186 * If there was a bus monitor reset event, we force the arbiter
187 * event to be printed
189 res = print_83xx_arb_event(rsr & RSR_BMRS, buf, size);
191 debug("%s: Could not write arbiter event message (err = %d)\n",
198 snprintf(buf, size, "\n");
203 static struct sysreset_ops mpc83xx_sysreset = {
204 .request = mpc83xx_sysreset_request,
205 .get_status = mpc83xx_sysreset_get_status,
208 U_BOOT_DRIVER(sysreset_mpc83xx) = {
209 .name = "mpc83xx_sysreset",
210 .id = UCLASS_SYSRESET,
211 .ops = &mpc83xx_sysreset,