drivers/staging/wilc1000/wlan_if.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
   4  * All rights reserved.
   5  */
   6
   7 #ifndef WILC_WLAN_IF_H
   8 #define WILC_WLAN_IF_H
   9
  10 #include <linux/netdevice.h>
  11 #include "fw.h"
  12
  13 /********************************************
  14  *
  15  *      Wlan Configuration ID
  16  *
  17  ********************************************/
  18
  19 enum bss_types {
  20         WILC_FW_BSS_TYPE_INFRA = 0,
  21         WILC_FW_BSS_TYPE_INDEPENDENT,
  22         WILC_FW_BSS_TYPE_AP,
  23 };
  24
  25 enum {
  26         WILC_FW_OPER_MODE_B_ONLY = 0,    /* 1, 2 M, otherwise 5, 11 M */
  27         WILC_FW_OPER_MODE_G_ONLY,        /* 6,12,24 otherwise 9,18,36,48,54 */
  28         WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */
  29         WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */
  30 };
  31
  32 enum {
  33         WILC_FW_PREAMBLE_SHORT = 0,     /* Short Preamble */
  34         WILC_FW_PREAMBLE_LONG = 1,      /* Long Preamble */
  35         WILC_FW_PREAMBLE_AUTO = 2,      /* Auto Preamble Selection */
  36 };
  37
  38 enum {
  39         WILC_FW_PASSIVE_SCAN = 0,
  40         WILC_FW_ACTIVE_SCAN = 1,
  41 };
  42
  43 enum {
  44         WILC_FW_NO_POWERSAVE = 0,
  45         WILC_FW_MIN_FAST_PS = 1,
  46         WILC_FW_MAX_FAST_PS = 2,
  47         WILC_FW_MIN_PSPOLL_PS = 3,
  48         WILC_FW_MAX_PSPOLL_PS = 4
  49 };
  50
  51 enum chip_ps_states {
  52         WILC_CHIP_WAKEDUP = 0,
  53         WILC_CHIP_SLEEPING_AUTO = 1,
  54         WILC_CHIP_SLEEPING_MANUAL = 2
  55 };
  56
  57 enum bus_acquire {
  58         WILC_BUS_ACQUIRE_ONLY = 0,
  59         WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
  60 };
  61
  62 enum bus_release {
  63         WILC_BUS_RELEASE_ONLY = 0,
  64         WILC_BUS_RELEASE_ALLOW_SLEEP = 1,
  65 };
  66
  67 enum {
  68         WILC_FW_NO_ENCRYPT = 0,
  69         WILC_FW_ENCRYPT_ENABLED = BIT(0),
  70         WILC_FW_WEP = BIT(1),
  71         WILC_FW_WEP_EXTENDED = BIT(2),
  72         WILC_FW_WPA = BIT(3),
  73         WILC_FW_WPA2 = BIT(4),
  74         WILC_FW_AES = BIT(5),
  75         WILC_FW_TKIP = BIT(6)
  76 };
  77
  78 enum {
  79         WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT,
  80         WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED,
  81         WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP,
  82         WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED,
  83         WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA,
  84         WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA,
  85         WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED,
  86         WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2,
  87         WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2
  88 };
  89
  90 enum authtype {
  91         WILC_FW_AUTH_OPEN_SYSTEM = 1,
  92         WILC_FW_AUTH_SHARED_KEY = 2,
  93         WILC_FW_AUTH_ANY = 3,
  94         WILC_FW_AUTH_IEEE8021 = 5
  95 };
  96
  97 enum site_survey {
  98         WILC_FW_SITE_SURVEY_1CH = 0,
  99         WILC_FW_SITE_SURVEY_ALL_CH = 1,
 100         WILC_FW_SITE_SURVEY_OFF = 2
 101 };
 102
 103 enum {
 104         WILC_FW_ACK_POLICY_NORMAL = 0,
 105         WILC_FW_ACK_NO_POLICY,
 106 };
 107
 108 enum {
 109         WILC_FW_REKEY_POLICY_DISABLE = 1,
 110         WILC_FW_REKEY_POLICY_TIME_BASE,
 111         WILC_FW_REKEY_POLICY_PKT_BASE,
 112         WILC_FW_REKEY_POLICY_TIME_PKT_BASE
 113 };
 114
 115 enum {
 116         WILC_FW_FILTER_NO = 0x00,
 117         WILC_FW_FILTER_AP_ONLY = 0x01,
 118         WILC_FW_FILTER_STA_ONLY = 0x02
 119 };
 120
 121 enum {
 122         WILC_FW_11N_PROT_AUTO = 0,      /* Auto */
 123         WILC_FW_11N_NO_PROT,            /* Do not use any protection */
 124         WILC_FW_11N_PROT_ERP,           /* Protect all ERP frame exchanges */
 125         WILC_FW_11N_PROT_HT,            /* Protect all HT frame exchanges  */
 126         WILC_FW_11N_PROT_GF             /* Protect all GF frame exchanges  */
 127 };
 128
 129 enum {
 130         WILC_FW_ERP_PROT_SELF_CTS,
 131         WILC_FW_ERP_PROT_RTS_CTS,
 132 };
 133
 134 enum {
 135         WILC_FW_11N_OP_MODE_HT_MIXED = 1,
 136         WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ,
 137         WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ,
 138 };
 139
 140 enum {
 141         WILC_FW_OBBS_NONHT_NO_DETECT = 0,
 142         WILC_FW_OBBS_NONHT_DETECT_ONLY = 1,
 143         WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2,
 144         WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3,
 145 };
 146
 147 enum {
 148         WILC_FW_HT_PROT_RTS_CTS_NONHT = 0,  /* RTS-CTS at non-HT rate */
 149         WILC_FW_HT_PROT_FIRST_FRAME_NONHT,  /* First frame at non-HT rate */
 150         WILC_FW_HT_PROT_LSIG_TXOP,          /* LSIG TXOP Protection */
 151         WILC_FW_HT_PROT_FIRST_FRAME_MIXED,  /* First frame at Mixed format */
 152 };
 153
 154 enum {
 155         WILC_FW_SMPS_MODE_STATIC = 1,
 156         WILC_FW_SMPS_MODE_DYNAMIC = 2,
 157         WILC_FW_SMPS_MODE_MIMO = 3,     /* power save disable */
 158 };
 159
 160 enum {
 161         WILC_FW_TX_RATE_AUTO = 0,
 162         WILC_FW_TX_RATE_MBPS_1 = 1,
 163         WILC_FW_TX_RATE_MBPS_2 = 2,
 164         WILC_FW_TX_RATE_MBPS_5_5 = 5,
 165         WILC_FW_TX_RATE_MBPS_11 = 11,
 166         WILC_FW_TX_RATE_MBPS_6 = 6,
 167         WILC_FW_TX_RATE_MBPS_9 = 9,
 168         WILC_FW_TX_RATE_MBPS_12 = 12,
 169         WILC_FW_TX_RATE_MBPS_18 = 18,
 170         WILC_FW_TX_RATE_MBPS_24 = 24,
 171         WILC_FW_TX_RATE_MBPS_36 = 36,
 172         WILC_FW_TX_RATE_MBPS_48 = 48,
 173         WILC_FW_TX_RATE_MBPS_54 = 54
 174 };
 175
 176 enum {
 177         WILC_FW_DEFAULT_SCAN = 0,
 178         WILC_FW_USER_SCAN = BIT(0),
 179         WILC_FW_OBSS_PERIODIC_SCAN = BIT(1),
 180         WILC_FW_OBSS_ONETIME_SCAN = BIT(2)
 181 };
 182
 183 enum {
 184         WILC_FW_ACTION_FRM_IDX = 0,
 185         WILC_FW_PROBE_REQ_IDX = 1
 186 };
 187
 188 enum wid_type {
 189         WID_CHAR                = 0,
 190         WID_SHORT               = 1,
 191         WID_INT                 = 2,
 192         WID_STR                 = 3,
 193         WID_BIN_DATA            = 4,
 194         WID_BIN                 = 5,
 195 };
 196
 197 struct wid {
 198         u16 id;
 199         enum wid_type type;
 200         s32 size;
 201         s8 *val;
 202 };
 203
 204 enum {
 205         WID_NIL                         = 0xffff,
 206
 207         /*
 208          *  BSS Type
 209          *  -----------------------------------------------------------
 210          *  Configuration : Infrastructure   Independent   Access Point
 211          *  Values to set :         0               1            2
 212          *  -----------------------------------------------------------
 213          */
 214         WID_BSS_TYPE                    = 0x0000,
 215
 216         /*
 217          *  Transmit Rate
 218          *  -----------------------------------------------------------
 219          *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
 220          *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
 221          *  -----------------------------------------------------------
 222          */
 223         WID_CURRENT_TX_RATE             = 0x0001,
 224
 225         /*
 226          *  Channel
 227          *  -----------------------------------------------------------
 228          *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 229          *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 230          *  -----------------------------------------------------------
 231          */
 232         WID_CURRENT_CHANNEL             = 0x0002,
 233
 234         /*
 235          *  Preamble
 236          *  -----------------------------------------------------------
 237          *  Configuration :    short    long      Auto
 238          *  Values to set :       0       1         2
 239          *  -----------------------------------------------------------
 240          */
 241         WID_PREAMBLE                    = 0x0003,
 242
 243         /*
 244          * 11g operating mode (ignored if 11g not present)
 245          *  -----------------------------------------------------------
 246          *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
 247          *  Values to set :          1               2               3
 248          *  -----------------------------------------------------------
 249          */
 250         WID_11G_OPERATING_MODE          = 0x0004,
 251
 252         /*
 253          *  Mac status (response only)
 254          *  -----------------------------------------------------------
 255          *  Configuration :   disconnect  connect
 256          *  Values to get :          0       1
 257          *  -----------------------------------------------------------
 258          */
 259         WID_STATUS                      = 0x0005,
 260
 261         /*
 262          *  Scan type
 263          *  -----------------------------------------------------------
 264          *  Configuration :   Passive Scanning   Active Scanning
 265          *  Values to set :                  0                 1
 266          *  -----------------------------------------------------------
 267          */
 268         WID_SCAN_TYPE                   = 0x0007,
 269
 270         /*
 271          *  Key Id (WEP default key Id)
 272          *  -----------------------------------------------------------
 273          *  Configuration :   Any value between 0 to 3
 274          *  Values to set :   Same value. Default is 0
 275          *  -----------------------------------------------------------
 276          */
 277         WID_KEY_ID                      = 0x0009,
 278
 279         /*
 280          *  QoS Enable
 281          *  -----------------------------------------------------------
 282          *  Configuration :   QoS Disable   WMM Enable
 283          *  Values to set :   0             1
 284          *  -----------------------------------------------------------
 285          */
 286         WID_QOS_ENABLE                  = 0x000A,
 287
 288         /*
 289          *  Power Management
 290          *  -----------------------------------------------------------
 291          *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
 292          *  Values to set : 0            1             2
 293          *  -----------------------------------------------------------
 294          */
 295         WID_POWER_MANAGEMENT            = 0x000B,
 296
 297         /*
 298          *  WEP/802 11I Configuration
 299          *  -----------------------------------------------------------
 300          *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
 301          *  Values (0x)  :   00     03   07     29       49       31      51
 302          *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
 303          *  Values (0x)  :      69        71
 304          *  -----------------------------------------------------------
 305          */
 306         WID_11I_MODE                    = 0x000C,
 307
 308         /*
 309          *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
 310          *  -----------------------------------------------------------
 311          *  Configuration : Open System Shared Key Any Type | 802.1x Auth
 312          *  Values (0x)   :    01             02         03 |    BIT2
 313          *  -----------------------------------------------------------
 314          */
 315         WID_AUTH_TYPE                   = 0x000D,
 316
 317         /*
 318          *  Site Survey Type
 319          *  -----------------------------------------------------------
 320          *  Configuration       :  Values to set
 321          *  Survey 1 Channel    :  0
 322          *  survey all Channels :  1
 323          *  Disable Site Survey :  2
 324          *  -----------------------------------------------------------
 325          */
 326         WID_SITE_SURVEY                 = 0x000E,
 327
 328         /*
 329          *  Listen Interval
 330          *  -----------------------------------------------------------
 331          *  Configuration :   Any value between 1 to 255
 332          *  Values to set :   Same value. Default is 3
 333          *  -----------------------------------------------------------
 334          */
 335         WID_LISTEN_INTERVAL             = 0x000F,
 336
 337         /*
 338          *  DTIM Period
 339          *  -----------------------------------------------------------
 340          *  Configuration :   Any value between 1 to 255
 341          *  Values to set :   Same value. Default is 3
 342          *  -----------------------------------------------------------
 343          */
 344         WID_DTIM_PERIOD                 = 0x0010,
 345
 346         /*
 347          *  ACK Policy
 348          *  -----------------------------------------------------------
 349          *  Configuration :   Normal Ack            No Ack
 350          *  Values to set :       0                   1
 351          *  -----------------------------------------------------------
 352          */
 353         WID_ACK_POLICY                  = 0x0011,
 354
 355         /*
 356          *  Reset MAC (Set only)
 357          *  -----------------------------------------------------------
 358          *  Configuration :   Don't Reset       Reset   No Request
 359          *  Values to set :       0               1         2
 360          *  -----------------------------------------------------------
 361          */
 362         WID_RESET                       = 0x0012,
 363
 364         /*
 365          *  Broadcast SSID Option: Setting this will adhere to "" SSID element
 366          *  -----------------------------------------------------------
 367          *  Configuration :   Enable             Disable
 368          *  Values to set :   1                  0
 369          *  -----------------------------------------------------------
 370          */
 371         WID_BCAST_SSID                  = 0x0015,
 372
 373         /*
 374          *  Disconnect (Station)
 375          *  -----------------------------------------------------------
 376          *  Configuration :   Association ID
 377          *  Values to set :   Association ID
 378          *  -----------------------------------------------------------
 379          */
 380         WID_DISCONNECT                  = 0x0016,
 381
 382         /*
 383          *  11a Tx Power Level
 384          *  -----------------------------------------------------------
 385          *  Configuration : Sets TX Power (Higher the value greater the power)
 386          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 387          *  -----------------------------------------------------------
 388          */
 389         WID_TX_POWER_LEVEL_11A          = 0x0018,
 390
 391         /*
 392          *  Group Key Update Policy Selection
 393          *  -----------------------------------------------------------
 394          *  Configuration : Disabled timeBased packetBased timePacketBased
 395          *  Values to set :   1            2          3              4
 396          *  -----------------------------------------------------------
 397          */
 398         WID_REKEY_POLICY                = 0x0019,
 399
 400         /*
 401          *  Allow Short Slot
 402          *  -----------------------------------------------------------
 403          *  Configuration : Disallow Short Slot      Allow Short Slot
 404          *          (Enable Only Long Slot) (Enable Short Slot if applicable)
 405          *  Values to set :    0         1
 406          *  -----------------------------------------------------------
 407          */
 408         WID_SHORT_SLOT_ALLOWED          = 0x001A,
 409
 410         WID_PHY_ACTIVE_REG              = 0x001B,
 411
 412         /*
 413          *  11b Tx Power Level
 414          *  -----------------------------------------------------------
 415          *  Configuration : Sets TX Power (Higher the value greater the power)
 416          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 417          *  -----------------------------------------------------------
 418          */
 419         WID_TX_POWER_LEVEL_11B          = 0x001D,
 420
 421         /*
 422          *  Scan Request
 423          *  -----------------------------------------------------------
 424          *  Configuration : Request default scan
 425          *  Values to set : 0
 426          *  -----------------------------------------------------------
 427          */
 428         WID_START_SCAN_REQ              = 0x001E,
 429
 430         /*
 431          *  Rssi (get only)
 432          *  -----------------------------------------------------------
 433          *  Configuration :
 434          *  Values to get : Rssi value
 435          *  -----------------------------------------------------------
 436          */
 437         WID_RSSI                        = 0x001F,
 438
 439         /*
 440          * Join Request
 441          *  -----------------------------------------------------------
 442          *  Configuration : Request to join
 443          *  Values to set : index of scan result
 444          *  -----------------------------------------------------------
 445          */
 446         WID_JOIN_REQ                    = 0x0020,
 447
 448         WID_LINKSPEED                   = 0x0026,
 449
 450         /*
 451          *  Enable User Control of TX Power
 452          *  -----------------------------------------------------------
 453          *  Configuration : Disable                  Enable
 454          *  Values to set :    0                       1
 455          *  -----------------------------------------------------------
 456          */
 457         WID_USER_CONTROL_ON_TX_POWER    = 0x0027,
 458
 459         WID_MEMORY_ACCESS_8BIT          = 0x0029,
 460
 461         /*
 462          *  Enable Auto RX Sensitivity feature
 463          *  -----------------------------------------------------------
 464          *  Configuration : Disable                  Enable
 465          *  Values to set :    0                       1
 466          *  -----------------------------------------------------------
 467          */
 468         WID_AUTO_RX_SENSITIVITY         = 0x0032,
 469
 470         /*
 471          *  Receive Buffer Based Ack
 472          *  -----------------------------------------------------------
 473          *  Configuration : Disable                  Enable
 474          *  Values to set :    0                       1
 475          *  -----------------------------------------------------------
 476          */
 477         WID_DATAFLOW_CONTROL            = 0x0033,
 478
 479         /*
 480          *  Scan Filter
 481          *  -----------------------------------------------------------
 482          *  Configuration : Class       No filter   AP only   Station Only
 483          *  Values to set :                0           1           2
 484          *  Configuration : Priority    High Rssi   Low Rssi     Detect
 485          *  Values to set :                0          0x4         0x0
 486          *  Configuration : Channel     filter off  filter on
 487          *  Values to set :                0          0x10
 488          *  -----------------------------------------------------------
 489          */
 490         WID_SCAN_FILTER                 = 0x0036,
 491
 492         /*
 493          *  Link Loss Threshold (measure in the beacon period)
 494          *  -----------------------------------------------------------
 495          *  Configuration : Any value between 10 and 254(Set to 255 disable)
 496          *  Values to set : Same value. Default is 10
 497          *  -----------------------------------------------------------
 498          */
 499         WID_LINK_LOSS_THRESHOLD         = 0x0037,
 500
 501         WID_ABORT_RUNNING_SCAN          = 0x003E,
 502
 503         /* NMAC Character WID list */
 504         WID_WPS_START                   = 0x0043,
 505
 506         /*
 507          *  Protection mode for MAC
 508          *  -----------------------------------------------------------
 509          *  Configuration :  Auto  No protection  ERP    HT    GF
 510          *  Values to set :  0     1              2      3     4
 511          *  -----------------------------------------------------------
 512          */
 513         WID_11N_PROT_MECH               = 0x0080,
 514
 515         /*
 516          *  ERP Protection type for MAC
 517          *  -----------------------------------------------------------
 518          *  Configuration :  Self-CTS   RTS-CTS
 519          *  Values to set :  0          1
 520          *  -----------------------------------------------------------
 521          */
 522         WID_11N_ERP_PROT_TYPE           = 0x0081,
 523
 524         /*
 525          *  HT Option Enable
 526          *  -----------------------------------------------------------
 527          *  Configuration :   HT Enable          HT Disable
 528          *  Values to set :   1                  0
 529          *  -----------------------------------------------------------
 530          */
 531         WID_11N_ENABLE                  = 0x0082,
 532
 533         /*
 534          *  11n Operating mode (Note that 11g operating mode will also be
 535          *  used in addition to this, if this is set to HT Mixed mode)
 536          *  -----------------------------------------------------------
 537          *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
 538          *  Values to set :     1         2               3
 539          *  -----------------------------------------------------------
 540          */
 541         WID_11N_OPERATING_MODE          = 0x0083,
 542
 543         /*
 544          *  11n OBSS non-HT STA Detection flag
 545          *  -----------------------------------------------------------
 546          *  Configuration :  Do not detect
 547          *  Values to set :  0
 548          *  Configuration :  Detect, do not protect or report
 549          *  Values to set :  1
 550          *  Configuration :  Detect, protect and do not report
 551          *  Values to set :  2
 552          *  Configuration :  Detect, protect and report to other BSS
 553          *  Values to set :  3
 554          *  -----------------------------------------------------------
 555          */
 556         WID_11N_OBSS_NONHT_DETECTION    = 0x0084,
 557
 558         /*
 559          *  11n HT Protection Type
 560          *  -----------------------------------------------------------
 561          *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
 562          *  Values to set :  0         1
 563          *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
 564          *  Values to set :  2         3
 565          *  -----------------------------------------------------------
 566          */
 567         WID_11N_HT_PROT_TYPE            = 0x0085,
 568
 569         /*
 570          *  11n RIFS Protection Enable Flag
 571          *  -----------------------------------------------------------
 572          *  Configuration :  Disable    Enable
 573          *  Values to set :  0          1
 574          *  -----------------------------------------------------------
 575          */
 576         WID_11N_RIFS_PROT_ENABLE        = 0x0086,
 577
 578         /*
 579          *  SMPS Mode
 580          *  -----------------------------------------------------------
 581          *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
 582          *  Values to set :  1        2         3
 583          *  -----------------------------------------------------------
 584          */
 585         WID_11N_SMPS_MODE               = 0x0087,
 586
 587         /*
 588          *  Current transmit MCS
 589          *  -----------------------------------------------------------
 590          *  Configuration :  MCS Index for data rate
 591          *  Values to set :  0 to 7
 592          *  -----------------------------------------------------------
 593          */
 594         WID_11N_CURRENT_TX_MCS          = 0x0088,
 595
 596         WID_11N_PRINT_STATS             = 0x0089,
 597
 598         /*
 599          *  11n Short GI Enable Flag
 600          *  -----------------------------------------------------------
 601          *  Configuration :  Disable    Enable
 602          *  Values to set :  0          1
 603          *  -----------------------------------------------------------
 604          */
 605         WID_11N_SHORT_GI_ENABLE         = 0x008D,
 606
 607         /*
 608          *  11n RIFS Enable Flag
 609          *  -----------------------------------------------------------
 610          *  Configuration :  Disable    Enable
 611          *  Values to set :  0          1
 612          *  -----------------------------------------------------------
 613          */
 614         WID_RIFS_MODE                   = 0x0094,
 615
 616         /*
 617          *  TX Abort Feature
 618          *  -----------------------------------------------------------
 619          *  Configuration :  Disable Self CTS    Enable Self CTS
 620          *  Values to set :             0                      1
 621          *  Configuration :  Disable TX Abort    Enable TX Abort
 622          *  Values to set :             2                      3
 623          *  Configuration :  Enable HW TX Abort Enable SW TX Abort
 624          *  Values to set :             4                      5
 625          *  -----------------------------------------------------------
 626          */
 627         WID_TX_ABORT_CONFIG             = 0x00A1,
 628
 629         WID_REG_TSSI_11B_VALUE          = 0x00A6,
 630         WID_REG_TSSI_11G_VALUE          = 0x00A7,
 631         WID_REG_TSSI_11N_VALUE          = 0x00A8,
 632         WID_TX_CALIBRATION              = 0x00A9,
 633         WID_DSCR_TSSI_11B_VALUE         = 0x00AA,
 634         WID_DSCR_TSSI_11G_VALUE         = 0x00AB,
 635         WID_DSCR_TSSI_11N_VALUE         = 0x00AC,
 636
 637         /*
 638          *  Immediate Block-Ack Support
 639          *  -----------------------------------------------------------
 640          *  Configuration : Disable                  Enable
 641          *  Values to set :    0                       1
 642          *  -----------------------------------------------------------
 643          */
 644         WID_11N_IMMEDIATE_BA_ENABLED    = 0x00AF,
 645
 646         /*
 647          *  TXOP Disable Flag
 648          *  -----------------------------------------------------------
 649          *  Configuration : Disable                  Enable
 650          *  Values to set :    1                        0
 651          *  -----------------------------------------------------------
 652          */
 653         WID_11N_TXOP_PROT_DISABLE       = 0x00B0,
 654
 655         WID_TX_POWER_LEVEL_11N          = 0x00B1,
 656
 657         /* Custom Character WID list */
 658         /* SCAN Complete notification WID*/
 659         WID_SCAN_COMPLETE               = 0x00C9,
 660
 661         WID_DEL_BEACON                  = 0x00CA,
 662
 663         WID_LOG_TERMINAL_SWITCH         = 0x00CD,
 664         WID_TX_POWER                    = 0x00CE,
 665         /*  EMAC Short WID list */
 666         /*  RTS Threshold */
 667         /*
 668          *  -----------------------------------------------------------
 669          *  Configuration :   Any value between 256 to 2347
 670          *  Values to set :   Same value. Default is 2347
 671          *  -----------------------------------------------------------
 672          */
 673         WID_RTS_THRESHOLD               = 0x1000,
 674
 675         /*
 676          *  Fragmentation Threshold
 677          *  -----------------------------------------------------------
 678          *  Configuration :   Any value between 256 to 2346
 679          *  Values to set :   Same value. Default is 2346
 680          *  -----------------------------------------------------------
 681          */
 682         WID_FRAG_THRESHOLD              = 0x1001,
 683
 684         WID_SHORT_RETRY_LIMIT           = 0x1002,
 685         WID_LONG_RETRY_LIMIT            = 0x1003,
 686         WID_BEACON_INTERVAL             = 0x1006,
 687         WID_MEMORY_ACCESS_16BIT         = 0x1008,
 688         WID_PASSIVE_SCAN_TIME           = 0x100D,
 689         WID_JOIN_START_TIMEOUT          = 0x100F,
 690         WID_ASOC_TIMEOUT                = 0x1011,
 691         WID_11I_PROTOCOL_TIMEOUT        = 0x1012,
 692         WID_EAPOL_RESPONSE_TIMEOUT      = 0x1013,
 693
 694         /* NMAC Short WID list */
 695         WID_11N_SIG_QUAL_VAL            = 0x1085,
 696         WID_CCA_THRESHOLD               = 0x1087,
 697
 698         /* Custom Short WID list */
 699
 700         /* EMAC Integer WID list */
 701         WID_FAILED_COUNT                = 0x2000,
 702         WID_RETRY_COUNT                 = 0x2001,
 703         WID_MULTIPLE_RETRY_COUNT        = 0x2002,
 704         WID_FRAME_DUPLICATE_COUNT       = 0x2003,
 705         WID_ACK_FAILURE_COUNT           = 0x2004,
 706         WID_RECEIVED_FRAGMENT_COUNT     = 0x2005,
 707         WID_MCAST_RECEIVED_FRAME_COUNT  = 0x2006,
 708         WID_FCS_ERROR_COUNT             = 0x2007,
 709         WID_SUCCESS_FRAME_COUNT         = 0x2008,
 710         WID_HUT_TX_COUNT                = 0x200A,
 711         WID_TX_FRAGMENT_COUNT           = 0x200B,
 712         WID_TX_MULTICAST_FRAME_COUNT    = 0x200C,
 713         WID_RTS_SUCCESS_COUNT           = 0x200D,
 714         WID_RTS_FAILURE_COUNT           = 0x200E,
 715         WID_WEP_UNDECRYPTABLE_COUNT     = 0x200F,
 716         WID_REKEY_PERIOD                = 0x2010,
 717         WID_REKEY_PACKET_COUNT          = 0x2011,
 718         WID_1X_SERV_ADDR                = 0x2012,
 719         WID_STACK_IP_ADDR               = 0x2013,
 720         WID_STACK_NETMASK_ADDR          = 0x2014,
 721         WID_HW_RX_COUNT                 = 0x2015,
 722         WID_MEMORY_ADDRESS              = 0x201E,
 723         WID_MEMORY_ACCESS_32BIT         = 0x201F,
 724
 725         /* NMAC Integer WID list */
 726         /* Custom Integer WID list */
 727         WID_GET_INACTIVE_TIME           = 0x2084,
 728         /* EMAC String WID list */
 729         WID_SSID                        = 0x3000,
 730         WID_FIRMWARE_VERSION            = 0x3001,
 731         WID_OPERATIONAL_RATE_SET        = 0x3002,
 732         WID_BSSID                       = 0x3003,
 733         WID_WEP_KEY_VALUE               = 0x3004,
 734         WID_11I_PSK                     = 0x3008,
 735         WID_11E_P_ACTION_REQ            = 0x3009,
 736         WID_1X_KEY                      = 0x300A,
 737         WID_HARDWARE_VERSION            = 0x300B,
 738         WID_MAC_ADDR                    = 0x300C,
 739         WID_HUT_DEST_ADDR               = 0x300D,
 740         WID_PHY_VERSION                 = 0x300F,
 741         WID_SUPP_USERNAME               = 0x3010,
 742         WID_SUPP_PASSWORD               = 0x3011,
 743         WID_SITE_SURVEY_RESULTS         = 0x3012,
 744         WID_RX_POWER_LEVEL              = 0x3013,
 745         WID_SET_STA_MAC_INACTIVE_TIME   = 0x3017,
 746         WID_ADD_WEP_KEY                 = 0x3019,
 747         WID_REMOVE_WEP_KEY              = 0x301A,
 748         WID_ADD_PTK                     = 0x301B,
 749         WID_ADD_RX_GTK                  = 0x301C,
 750         WID_ADD_TX_GTK                  = 0x301D,
 751         WID_REMOVE_KEY                  = 0x301E,
 752         WID_ASSOC_REQ_INFO              = 0x301F,
 753         WID_ASSOC_RES_INFO              = 0x3020,
 754         WID_MANUFACTURER                = 0x3026, /* Added for CAPI tool */
 755         WID_MODEL_NAME                  = 0x3027, /* Added for CAPI tool */
 756         WID_MODEL_NUM                   = 0x3028, /* Added for CAPI tool */
 757         WID_DEVICE_NAME                 = 0x3029, /* Added for CAPI tool */
 758
 759         /* NMAC String WID list */
 760         WID_SET_OPERATION_MODE          = 0x3079,
 761         WID_11N_P_ACTION_REQ            = 0x3080,
 762         WID_HUT_TEST_ID                 = 0x3081,
 763         WID_PMKID_INFO                  = 0x3082,
 764         WID_FIRMWARE_INFO               = 0x3083,
 765         WID_REGISTER_FRAME              = 0x3084,
 766         WID_DEL_ALL_STA                 = 0x3085,
 767         WID_REMAIN_ON_CHAN              = 0x3996,
 768         WID_SSID_PROBE_REQ              = 0x3997,
 769         WID_JOIN_REQ_EXTENDED           = 0x3998,
 770
 771         WID_IP_ADDRESS                  = 0x3999,
 772
 773         /* Custom String WID list */
 774
 775         /* EMAC Binary WID list */
 776         WID_UAPSD_CONFIG                = 0x4001,
 777         WID_UAPSD_STATUS                = 0x4002,
 778         WID_WMM_AP_AC_PARAMS            = 0x4003,
 779         WID_WMM_STA_AC_PARAMS           = 0x4004,
 780         WID_NETWORK_INFO                = 0x4005,
 781         WID_STA_JOIN_INFO               = 0x4006,
 782         WID_CONNECTED_STA_LIST          = 0x4007,
 783
 784         /* NMAC Binary WID list */
 785         WID_11N_AUTORATE_TABLE          = 0x4080,
 786
 787         WID_SCAN_CHANNEL_LIST           = 0x4084,
 788
 789         WID_INFO_ELEMENT_PROBE          = 0x4085,
 790         WID_INFO_ELEMENT_ASSOCIATE      = 0x4086,
 791         WID_ADD_STA                     = 0X4087,
 792         WID_REMOVE_STA                  = 0X4088,
 793         WID_EDIT_STA                    = 0X4089,
 794         WID_ADD_BEACON                  = 0x408a,
 795
 796         WID_SETUP_MULTICAST_FILTER      = 0x408b,
 797
 798         /* Miscellaneous WIDs */
 799         WID_ALL                         = 0x7FFE,
 800         WID_MAX                         = 0xFFFF
 801 };
 802
 803 #endif