3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 # See file CREDITS for list of people who contributed to this
8 # This program is free software; you can redistribute it and/or
9 # modify it under the terms of the GNU General Public License as
10 # published by the Free Software Foundation; either version 2 of
11 # the License, or (at your option) any later version.
13 # This program is distributed in the hope that it will be useful,
14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 # GNU General Public License for more details.
18 # You should have received a copy of the GNU General Public License
19 # along with this program; if not, write to the Free Software
20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 # File: drivers/sk98lin/Makefile
25 # Makefile for the SysKonnect SK-98xx device driver.
30 OBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
31 ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
32 skxmac2.o skcsum.o #skproc.o
34 OBJS += uboot_skb.o uboot_drv.o
41 -DSK_DEBUG_CHKMOD=0x00000000L \
42 -DSK_DEBUG_CHKCAT=0x00000000L
46 # **** possible debug modules for SK_DEBUG_CHKMOD *****************
47 # SK_DBGMOD_MERR 0x00000001L /* general module error indication */
48 # SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
49 # SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
50 # SK_DBGMOD_VPD 0x00000008L /* VPD module */
51 # SK_DBGMOD_I2C 0x00000010L /* I2C module */
52 # SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
53 # SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
54 # SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
55 # SK_DBGMOD_DRV 0x00010000L /* DRV module */
57 # **** possible debug categories for SK_DEBUG_CHKCAT **************
58 # *** common modules ***
59 # SK_DBGCAT_INIT 0x00000001L module/driver initialization
60 # SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL)
61 # SK_DBGCAT_ERR 0x00000004L error handling paths
62 # SK_DBGCAT_TX 0x00000008L transmit path
63 # SK_DBGCAT_RX 0x00000010L receive path
64 # SK_DBGCAT_IRQ 0x00000020L general IRQ handling
65 # SK_DBGCAT_QUEUE 0x00000040L any queue management
66 # SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump
67 # SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump
69 # *** driver (file skge.c) ***
70 # SK_DBGCAT_DRV_ENTRY 0x00010000 entry points
71 # SK_DBGCAT_DRV_??? 0x00020000 not used
72 # SK_DBGCAT_DRV_MCA 0x00040000 multicast
73 # SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path
74 # SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path
75 # SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime
76 # SK_DBGCAT_DRV_??? 0x00400000 not used
77 # SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode
78 # SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames
79 # SK_DBGCAT_DRV_ERROR 0x02000000 error conditions
80 # SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
81 # SK_DBGCAT_DRV_EVENT 0x08000000 driver events
83 EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
85 CFLAGS += $(EXTRA_CFLAGS)
93 #########################################################################
95 .depend: Makefile $(OBJS:.o=.c)
96 $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
100 #########################################################################