3 * originally from linux source (arch/powerpc/boot/ns16550.c)
4 * modified to use CONFIG_SYS_ISA_MEM and new defines
10 #include <linux/types.h>
13 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
14 #define UART_MCRVAL (UART_MCR_DTR | \
15 UART_MCR_RTS) /* RTS/DTR */
16 #define UART_FCRVAL (UART_FCR_FIFO_EN | \
18 UART_FCR_TXSR) /* Clear & enable FIFOs */
19 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED
20 #define serial_out(x,y) outb(x,(ulong)y)
21 #define serial_in(y) inb((ulong)y)
22 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0)
23 #define serial_out(x,y) out_be32(y,x)
24 #define serial_in(y) in_be32(y)
25 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0)
26 #define serial_out(x,y) out_le32(y,x)
27 #define serial_in(y) in_le32(y)
29 #define serial_out(x,y) writeb(x,y)
30 #define serial_in(y) readb(y)
33 #ifndef CONFIG_SYS_NS16550_IER
34 #define CONFIG_SYS_NS16550_IER 0x00
35 #endif /* CONFIG_SYS_NS16550_IER */
37 void NS16550_init (NS16550_t com_port, int baud_divisor)
39 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
40 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
41 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
43 serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr);
44 serial_out(0, &com_port->dll);
45 serial_out(0, &com_port->dlm);
46 serial_out(UART_LCRVAL, &com_port->lcr);
47 serial_out(UART_MCRVAL, &com_port->mcr);
48 serial_out(UART_FCRVAL, &com_port->fcr);
49 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
50 serial_out(baud_divisor & 0xff, &com_port->dll);
51 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
52 serial_out(UART_LCRVAL, &com_port->lcr);
53 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
54 #if defined(CONFIG_APTIX)
55 serial_out(3, &com_port->mdr1); /* /13 mode so Aptix 6MHz can hit 115200 */
57 serial_out(0, &com_port->mdr1); /* /16 is proper to hit 115200 with 48MHz */
59 #endif /* CONFIG_OMAP */
62 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
63 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
65 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
66 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
67 serial_out(0, &com_port->dll);
68 serial_out(0, &com_port->dlm);
69 serial_out(UART_LCRVAL, &com_port->lcr);
70 serial_out(UART_MCRVAL, &com_port->mcr);
71 serial_out(UART_FCRVAL, &com_port->fcr);
72 serial_out(UART_LCR_BKSE, &com_port->lcr);
73 serial_out(baud_divisor & 0xff, &com_port->dll);
74 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
75 serial_out(UART_LCRVAL, &com_port->lcr);
77 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
79 void NS16550_putc (NS16550_t com_port, char c)
81 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
82 serial_out(c, &com_port->thr);
85 * Call watchdog_reset() upon newline. This is done here in putc
86 * since the environment code uses a single puts() to print the complete
87 * environment upon "printenv". So we can't put this watchdog call
94 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
95 char NS16550_getc (NS16550_t com_port)
97 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
99 extern void usbtty_poll(void);
104 return serial_in(&com_port->rbr);
107 int NS16550_tstc (NS16550_t com_port)
109 return ((serial_in(&com_port->lsr) & UART_LSR_DR) != 0);
112 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */