Merge branch 'master' of git://git.denx.de/u-boot
[oweals/u-boot.git] / drivers / rtc / ds1307.c
1 /*
2  * (C) Copyright 2001, 2002, 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  * Keith Outwater, keith_outwater@mvis.com`
5  * Steven Scholz, steven.scholz@imc-berlin.de
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 /*
11  * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
12  * DS1307 and DS1338/9 Real Time Clock (RTC).
13  *
14  * based on ds1337.c
15  */
16
17 #include <common.h>
18 #include <command.h>
19 #include <dm.h>
20 #include <rtc.h>
21 #include <i2c.h>
22
23 enum ds_type {
24         ds_1307,
25         ds_1337,
26         ds_1340,
27         mcp794xx,
28 };
29
30 /*
31  * RTC register addresses
32  */
33 #define RTC_SEC_REG_ADDR        0x00
34 #define RTC_MIN_REG_ADDR        0x01
35 #define RTC_HR_REG_ADDR         0x02
36 #define RTC_DAY_REG_ADDR        0x03
37 #define RTC_DATE_REG_ADDR       0x04
38 #define RTC_MON_REG_ADDR        0x05
39 #define RTC_YR_REG_ADDR         0x06
40 #define RTC_CTL_REG_ADDR        0x07
41
42 #define RTC_SEC_BIT_CH          0x80    /* Clock Halt (in Register 0)   */
43
44 #define RTC_CTL_BIT_RS0         0x01    /* Rate select 0                */
45 #define RTC_CTL_BIT_RS1         0x02    /* Rate select 1                */
46 #define RTC_CTL_BIT_SQWE        0x10    /* Square Wave Enable           */
47 #define RTC_CTL_BIT_OUT         0x80    /* Output Control               */
48
49 /* MCP7941X-specific bits */
50 #define MCP7941X_BIT_ST         0x80
51 #define MCP7941X_BIT_VBATEN     0x08
52
53 #ifndef CONFIG_DM_RTC
54
55 #if defined(CONFIG_CMD_DATE)
56
57 /*---------------------------------------------------------------------*/
58 #undef DEBUG_RTC
59
60 #ifdef DEBUG_RTC
61 #define DEBUGR(fmt, args...) printf(fmt, ##args)
62 #else
63 #define DEBUGR(fmt, args...)
64 #endif
65 /*---------------------------------------------------------------------*/
66
67 #ifndef CONFIG_SYS_I2C_RTC_ADDR
68 # define CONFIG_SYS_I2C_RTC_ADDR        0x68
69 #endif
70
71 #if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
72 # error The DS1307 is specified only up to 100kHz!
73 #endif
74
75 static uchar rtc_read (uchar reg);
76 static void rtc_write (uchar reg, uchar val);
77
78 /*
79  * Get the current time from the RTC
80  */
81 int rtc_get (struct rtc_time *tmp)
82 {
83         int rel = 0;
84         uchar sec, min, hour, mday, wday, mon, year;
85
86 #ifdef CONFIG_RTC_MCP79411
87 read_rtc:
88 #endif
89         sec = rtc_read (RTC_SEC_REG_ADDR);
90         min = rtc_read (RTC_MIN_REG_ADDR);
91         hour = rtc_read (RTC_HR_REG_ADDR);
92         wday = rtc_read (RTC_DAY_REG_ADDR);
93         mday = rtc_read (RTC_DATE_REG_ADDR);
94         mon = rtc_read (RTC_MON_REG_ADDR);
95         year = rtc_read (RTC_YR_REG_ADDR);
96
97         DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
98                 "hr: %02x min: %02x sec: %02x\n",
99                 year, mon, mday, wday, hour, min, sec);
100
101 #ifdef CONFIG_RTC_DS1307
102         if (sec & RTC_SEC_BIT_CH) {
103                 printf ("### Warning: RTC oscillator has stopped\n");
104                 /* clear the CH flag */
105                 rtc_write (RTC_SEC_REG_ADDR,
106                            rtc_read (RTC_SEC_REG_ADDR) & ~RTC_SEC_BIT_CH);
107                 rel = -1;
108         }
109 #endif
110
111 #ifdef CONFIG_RTC_MCP79411
112         /* make sure that the backup battery is enabled */
113         if (!(wday & MCP7941X_BIT_VBATEN)) {
114                 rtc_write(RTC_DAY_REG_ADDR,
115                           wday | MCP7941X_BIT_VBATEN);
116         }
117
118         /* clock halted?  turn it on, so clock can tick. */
119         if (!(sec & MCP7941X_BIT_ST)) {
120                 rtc_write(RTC_SEC_REG_ADDR, MCP7941X_BIT_ST);
121                 printf("Started RTC\n");
122                 goto read_rtc;
123         }
124 #endif
125
126
127         tmp->tm_sec  = bcd2bin (sec & 0x7F);
128         tmp->tm_min  = bcd2bin (min & 0x7F);
129         tmp->tm_hour = bcd2bin (hour & 0x3F);
130         tmp->tm_mday = bcd2bin (mday & 0x3F);
131         tmp->tm_mon  = bcd2bin (mon & 0x1F);
132         tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
133         tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
134         tmp->tm_yday = 0;
135         tmp->tm_isdst= 0;
136
137         DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
138                 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
139                 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
140
141         return rel;
142 }
143
144
145 /*
146  * Set the RTC
147  */
148 int rtc_set (struct rtc_time *tmp)
149 {
150         DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
151                 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
152                 tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
153
154         if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
155                 printf("WARNING: year should be between 1970 and 2069!\n");
156
157         rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
158         rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
159 #ifdef CONFIG_RTC_MCP79411
160         rtc_write (RTC_DAY_REG_ADDR,
161                    bin2bcd (tmp->tm_wday + 1) | MCP7941X_BIT_VBATEN);
162 #else
163         rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
164 #endif
165         rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
166         rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
167         rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
168 #ifdef CONFIG_RTC_MCP79411
169         rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec) | MCP7941X_BIT_ST);
170 #else
171         rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
172 #endif
173
174         return 0;
175 }
176
177
178 /*
179  * Reset the RTC. We setting the date back to 1970-01-01.
180  * We also enable the oscillator output on the SQW/OUT pin and program
181  * it for 32,768 Hz output. Note that according to the datasheet, turning
182  * on the square wave output increases the current drain on the backup
183  * battery to something between 480nA and 800nA.
184  */
185 void rtc_reset (void)
186 {
187         struct rtc_time tmp;
188
189         rtc_write (RTC_SEC_REG_ADDR, 0x00);     /* clearing Clock Halt  */
190         rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS0);
191
192         tmp.tm_year = 1970;
193         tmp.tm_mon = 1;
194         tmp.tm_mday= 1;
195         tmp.tm_hour = 0;
196         tmp.tm_min = 0;
197         tmp.tm_sec = 0;
198
199         rtc_set(&tmp);
200
201         printf ( "RTC:   %4d-%02d-%02d %2d:%02d:%02d UTC\n",
202                 tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
203                 tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
204
205         return;
206 }
207
208
209 /*
210  * Helper functions
211  */
212
213 static
214 uchar rtc_read (uchar reg)
215 {
216         return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
217 }
218
219
220 static void rtc_write (uchar reg, uchar val)
221 {
222         i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
223 }
224
225 #endif /* CONFIG_CMD_DATE*/
226
227 #endif /* !CONFIG_DM_RTC */
228
229 #ifdef CONFIG_DM_RTC
230 static int ds1307_rtc_set(struct udevice *dev, const struct rtc_time *tm)
231 {
232         int ret;
233         uchar buf[7];
234         enum ds_type type = dev_get_driver_data(dev);
235
236         debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
237               tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
238               tm->tm_hour, tm->tm_min, tm->tm_sec);
239
240         if (tm->tm_year < 1970 || tm->tm_year > 2069)
241                 printf("WARNING: year should be between 1970 and 2069!\n");
242
243         buf[RTC_YR_REG_ADDR] = bin2bcd(tm->tm_year % 100);
244         buf[RTC_MON_REG_ADDR] = bin2bcd(tm->tm_mon);
245         buf[RTC_DAY_REG_ADDR] = bin2bcd(tm->tm_wday + 1);
246         buf[RTC_DATE_REG_ADDR] = bin2bcd(tm->tm_mday);
247         buf[RTC_HR_REG_ADDR] = bin2bcd(tm->tm_hour);
248         buf[RTC_MIN_REG_ADDR] = bin2bcd(tm->tm_min);
249         buf[RTC_SEC_REG_ADDR] = bin2bcd(tm->tm_sec);
250
251         if (type == mcp794xx) {
252                 buf[RTC_DAY_REG_ADDR] |= MCP7941X_BIT_VBATEN;
253                 buf[RTC_SEC_REG_ADDR] |= MCP7941X_BIT_ST;
254         }
255
256         ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
257         if (ret < 0)
258                 return ret;
259
260         return 0;
261 }
262
263 static int ds1307_rtc_get(struct udevice *dev, struct rtc_time *tm)
264 {
265         int ret;
266         uchar buf[7];
267         enum ds_type type = dev_get_driver_data(dev);
268
269 read_rtc:
270         ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
271         if (ret < 0)
272                 return ret;
273
274         if (type == ds_1307) {
275                 if (buf[RTC_SEC_REG_ADDR] & RTC_SEC_BIT_CH) {
276                         printf("### Warning: RTC oscillator has stopped\n");
277                         /* clear the CH flag */
278                         buf[RTC_SEC_REG_ADDR] &= ~RTC_SEC_BIT_CH;
279                         dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR,
280                                          buf[RTC_SEC_REG_ADDR]);
281                         return -1;
282                 }
283         }
284
285         if (type == mcp794xx) {
286                 /* make sure that the backup battery is enabled */
287                 if (!(buf[RTC_DAY_REG_ADDR] & MCP7941X_BIT_VBATEN)) {
288                         dm_i2c_reg_write(dev, RTC_DAY_REG_ADDR,
289                                          buf[RTC_DAY_REG_ADDR] |
290                                          MCP7941X_BIT_VBATEN);
291                 }
292
293                 /* clock halted?  turn it on, so clock can tick. */
294                 if (!(buf[RTC_SEC_REG_ADDR] & MCP7941X_BIT_ST)) {
295                         dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR,
296                                          MCP7941X_BIT_ST);
297                         printf("Started RTC\n");
298                         goto read_rtc;
299                 }
300         }
301
302         tm->tm_sec  = bcd2bin(buf[RTC_SEC_REG_ADDR] & 0x7F);
303         tm->tm_min  = bcd2bin(buf[RTC_MIN_REG_ADDR] & 0x7F);
304         tm->tm_hour = bcd2bin(buf[RTC_HR_REG_ADDR] & 0x3F);
305         tm->tm_mday = bcd2bin(buf[RTC_DATE_REG_ADDR] & 0x3F);
306         tm->tm_mon  = bcd2bin(buf[RTC_MON_REG_ADDR] & 0x1F);
307         tm->tm_year = bcd2bin(buf[RTC_YR_REG_ADDR]) +
308                               (bcd2bin(buf[RTC_YR_REG_ADDR]) >= 70 ?
309                                1900 : 2000);
310         tm->tm_wday = bcd2bin((buf[RTC_DAY_REG_ADDR] - 1) & 0x07);
311         tm->tm_yday = 0;
312         tm->tm_isdst = 0;
313
314         debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
315               tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
316               tm->tm_hour, tm->tm_min, tm->tm_sec);
317
318         return 0;
319 }
320
321 static int ds1307_rtc_reset(struct udevice *dev)
322 {
323         int ret;
324         struct rtc_time tmp = {
325                 .tm_year = 1970,
326                 .tm_mon = 1,
327                 .tm_mday = 1,
328                 .tm_hour = 0,
329                 .tm_min = 0,
330                 .tm_sec = 0,
331         };
332
333         /* clear Clock Halt */
334         ret = dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, 0x00);
335         if (ret < 0)
336                 return ret;
337         ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR,
338                                RTC_CTL_BIT_SQWE | RTC_CTL_BIT_RS1 |
339                                RTC_CTL_BIT_RS0);
340         if (ret < 0)
341                 return ret;
342
343         ret = ds1307_rtc_set(dev, &tmp);
344         if (ret < 0)
345                 return ret;
346
347         debug("RTC:   %4d-%02d-%02d %2d:%02d:%02d UTC\n",
348               tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
349               tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
350
351         return 0;
352 }
353
354 static int ds1307_probe(struct udevice *dev)
355 {
356         i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
357                            DM_I2C_CHIP_WR_ADDRESS);
358
359         return 0;
360 }
361
362 static const struct rtc_ops ds1307_rtc_ops = {
363         .get = ds1307_rtc_get,
364         .set = ds1307_rtc_set,
365         .reset = ds1307_rtc_reset,
366 };
367
368 static const struct udevice_id ds1307_rtc_ids[] = {
369         { .compatible = "dallas,ds1307", .data = ds_1307 },
370         { .compatible = "dallas,ds1337", .data = ds_1337 },
371         { .compatible = "dallas,ds1340", .data = ds_1340 },
372         { .compatible = "microchip,mcp7941x", .data = mcp794xx },
373         { }
374 };
375
376 U_BOOT_DRIVER(rtc_ds1307) = {
377         .name   = "rtc-ds1307",
378         .id     = UCLASS_RTC,
379         .probe  = ds1307_probe,
380         .of_match = ds1307_rtc_ids,
381         .ops    = &ds1307_rtc_ops,
382 };
383 #endif /* CONFIG_DM_RTC */