1 # SPDX-License-Identifier: GPL-2.0-only
2 config ARCH_HAS_RESET_CONTROLLER
5 menuconfig RESET_CONTROLLER
6 bool "Reset Controller Support"
7 default y if ARCH_HAS_RESET_CONTROLLER
9 Generic Reset Controller support.
11 This framework is designed to abstract reset handling of devices
12 via GPIOs or SoC-internal reset controller modules.
19 tristate "Altera Arria10 System Resource Reset"
20 depends on MFD_ALTERA_A10SR
22 This option enables support for the external reset functions for
23 peripheral PHYs on the Altera Arria10 System Resource Chip.
26 bool "AR71xx Reset Driver" if COMPILE_TEST
29 This enables the ATH79 reset controller driver that supports the
30 AR71xx SoC reset controller.
33 bool "AXS10x Reset Driver" if COMPILE_TEST
34 default ARC_PLAT_AXS10X
36 This enables the reset controller driver for AXS10x.
39 bool "Berlin Reset Driver" if COMPILE_TEST
42 This enables the reset controller driver for Marvell Berlin SoCs.
45 tristate "Broadcom STB reset controller"
46 depends on ARCH_BRCMSTB || COMPILE_TEST
49 This enables the reset controller driver for Broadcom STB SoCs using
50 a SUN_TOP_CTRL_SW_INIT style controller.
53 bool "Synopsys HSDK Reset Driver"
55 depends on ARC_SOC_HSDK || COMPILE_TEST
57 This enables the reset controller driver for HSDK board.
60 bool "i.MX7/8 Reset Driver" if COMPILE_TEST
62 default SOC_IMX7D || (ARM64 && ARCH_MXC)
65 This enables the reset controller driver for i.MX7 SoCs.
68 bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
71 This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
74 bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
77 This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
80 bool "Meson Reset Driver" if COMPILE_TEST
83 This enables the reset driver for Amlogic Meson SoCs.
85 config RESET_MESON_AUDIO_ARB
86 tristate "Meson Audio Memory Arbiter Reset Driver"
87 depends on ARCH_MESON || COMPILE_TEST
89 This enables the reset driver for Audio Memory Arbiter of
90 Amlogic's A113 based SoCs
95 config RESET_PISTACHIO
96 bool "Pistachio Reset Driver" if COMPILE_TEST
97 default MACH_PISTACHIO
99 This enables the reset driver for ImgTec Pistachio SoCs.
101 config RESET_QCOM_AOSS
102 bool "Qcom AOSS Reset Driver"
103 depends on ARCH_QCOM || COMPILE_TEST
105 This enables the AOSS (always on subsystem) reset driver
106 for Qualcomm SDM845 SoCs. Say Y if you want to control
107 reset signals provided by AOSS for Modem, Venus, ADSP,
108 GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
110 config RESET_QCOM_PDC
111 tristate "Qualcomm PDC Reset Driver"
112 depends on ARCH_QCOM || COMPILE_TEST
114 This enables the PDC (Power Domain Controller) reset driver
115 for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
116 to control reset signals provided by PDC for Modem, Compute,
117 Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
120 bool "Simple Reset Controller Driver" if COMPILE_TEST
121 default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
123 This enables a simple reset controller driver for reset lines that
124 that can be asserted and deasserted by toggling bits in a contiguous,
125 exclusive register space.
127 Currently this driver supports:
130 - RCC reset controller in STM32 MCUs
132 - ZTE's zx2967 family
135 config RESET_STM32MP157
136 bool "STM32MP157 Reset Driver" if COMPILE_TEST
137 default MACH_STM32MP157
139 This enables the RCC reset controller driver for STM32 MPUs.
142 bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
146 This enables the reset driver for the SoCFPGA ARMv7 platforms. This
147 driver gets initialized early during platform init calls.
150 bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
154 This enables the reset driver for Allwinner SoCs.
157 tristate "TI System Control Interface (TI-SCI) reset driver"
158 depends on TI_SCI_PROTOCOL
160 This enables the reset driver support over TI System Control Interface
161 available on some new TI's SoCs. If you wish to use reset resources
162 managed by the TI System Controller, say Y here. Otherwise, say N.
164 config RESET_TI_SYSCON
165 tristate "TI SYSCON Reset Driver"
169 This enables the reset driver support for TI devices with
170 memory-mapped reset registers as part of a syscon device node. If
171 you wish to use the reset framework for such memory-mapped devices,
172 say Y here. Otherwise, say N.
174 config RESET_UNIPHIER
175 tristate "Reset controller driver for UniPhier SoCs"
176 depends on ARCH_UNIPHIER || COMPILE_TEST
177 depends on OF && MFD_SYSCON
178 default ARCH_UNIPHIER
180 Support for reset controllers on UniPhier SoCs.
181 Say Y if you want to control reset signals provided by System Control
182 block, Media I/O block, Peripheral Block.
184 config RESET_UNIPHIER_GLUE
185 tristate "Reset driver in glue layer for UniPhier SoCs"
186 depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
187 default ARCH_UNIPHIER
190 Support for peripheral core reset included in its own glue layer
191 on UniPhier SoCs. Say Y if you want to control reset signals
192 provided by the glue layer.
195 bool "ZYNQ Reset Driver" if COMPILE_TEST
198 This enables the reset controller driver for Xilinx Zynq SoCs.
200 source "drivers/reset/sti/Kconfig"
201 source "drivers/reset/hisilicon/Kconfig"
202 source "drivers/reset/tegra/Kconfig"