1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright 2007-2012 Freescale Semiconductor, Inc.
8 #include <asm/fsl_serdes.h>
10 DECLARE_GLOBAL_DATA_PTR;
13 * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
15 * Initialize controller and call the common driver/pci pci_hose_scan to
16 * scan for bridges and devices.
18 * Hose fields which need to be pre-initialized by board specific code:
28 #include <asm/fsl_pci.h>
30 #ifndef CONFIG_SYS_PCI_MEMORY_BUS
31 #define CONFIG_SYS_PCI_MEMORY_BUS 0
34 #ifndef CONFIG_SYS_PCI_MEMORY_PHYS
35 #define CONFIG_SYS_PCI_MEMORY_PHYS 0
38 #if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
39 #define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
42 /* Setup one inbound ATMU window.
44 * We let the caller decide what the window size should be
46 static void set_inbound_window(volatile pit_t *pi,
50 u32 sz = (__ilog2_u64(size) - 1);
51 #ifdef CONFIG_SYS_FSL_ERRATUM_A005434
54 u32 flag = PIWAR_LOCAL;
57 flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
59 out_be32(&pi->pitar, r->phys_start >> 12);
60 out_be32(&pi->piwbar, r->bus_start >> 12);
61 #ifdef CONFIG_SYS_PCI_64BIT
62 out_be32(&pi->piwbear, r->bus_start >> 44);
64 out_be32(&pi->piwbear, 0);
66 if (r->flags & PCI_REGION_PREFETCH)
68 out_be32(&pi->piwar, flag | sz);
71 int fsl_setup_hose(struct pci_controller *hose, unsigned long addr)
73 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
75 /* Reset hose to make sure its in a clean state */
76 memset(hose, 0, sizeof(struct pci_controller));
78 pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
80 return fsl_is_pci_agent(hose);
83 static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
84 u64 out_lo, u8 pcie_cap,
87 struct pci_region *r = hose->regions + hose->region_count;
88 u64 sz = min((u64)gd->ram_size, (1ull << 32));
90 phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
91 pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
94 /* we have no space available for inbound memory mapping */
95 if (bus_start > out_lo) {
96 printf ("no space for inbound mapping of memory\n");
101 if ((bus_start + sz) > out_lo) {
102 sz = out_lo - bus_start;
103 debug ("limiting size to %llx\n", sz);
106 pci_sz = 1ull << __ilog2_u64(sz);
108 * we can overlap inbound/outbound windows on PCI-E since RX & TX
111 if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) {
112 debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
113 (u64)bus_start, (u64)phys_start, (u64)sz);
114 pci_set_region(r, bus_start, phys_start, sz,
115 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
116 PCI_REGION_PREFETCH);
118 /* if we aren't an exact power of two match, pci_sz is smaller
119 * round it up to the next power of two. We report the actual
120 * size to pci region tracking.
123 sz = 2ull << __ilog2_u64(sz);
125 set_inbound_window(pi--, r++, sz);
126 sz = 0; /* make sure we dont set the R2 window */
128 debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
129 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
130 pci_set_region(r, bus_start, phys_start, pci_sz,
131 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
132 PCI_REGION_PREFETCH);
133 set_inbound_window(pi--, r++, pci_sz);
137 phys_start += pci_sz;
139 pci_sz = 1ull << __ilog2_u64(sz);
141 debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
142 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
143 pci_set_region(r, bus_start, phys_start, pci_sz,
144 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
145 PCI_REGION_PREFETCH);
146 set_inbound_window(pi--, r++, pci_sz);
149 phys_start += pci_sz;
153 #if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
155 * On 64-bit capable systems, set up a mapping for all of DRAM
156 * in high pci address space.
158 pci_sz = 1ull << __ilog2_u64(gd->ram_size);
159 /* round up to the next largest power of two */
160 if (gd->ram_size > pci_sz)
161 pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1);
162 debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n",
163 (u64)CONFIG_SYS_PCI64_MEMORY_BUS,
164 (u64)CONFIG_SYS_PCI_MEMORY_PHYS,
167 CONFIG_SYS_PCI64_MEMORY_BUS,
168 CONFIG_SYS_PCI_MEMORY_PHYS,
170 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
171 PCI_REGION_PREFETCH);
172 set_inbound_window(pi--, r++, pci_sz);
174 pci_sz = 1ull << __ilog2_u64(sz);
176 debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
177 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
178 pci_set_region(r, bus_start, phys_start, pci_sz,
179 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
180 PCI_REGION_PREFETCH);
183 phys_start += pci_sz;
184 set_inbound_window(pi--, r++, pci_sz);
188 #ifdef CONFIG_PHYS_64BIT
189 if (sz && (((u64)gd->ram_size) < (1ull << 32)))
190 printf("Was not able to map all of memory via "
191 "inbound windows -- %lld remaining\n", sz);
194 hose->region_count = r - hose->regions;
199 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
200 static void fsl_pcie_boot_master(pit_t *pi)
202 /* configure inbound window for slave's u-boot image */
203 debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
204 "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
205 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
206 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
207 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
208 struct pci_region r_inbound;
209 u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE)
211 pci_set_region(&r_inbound,
212 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
213 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
215 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
217 set_inbound_window(pi--, &r_inbound,
218 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
220 /* configure inbound window for slave's u-boot image */
221 debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
222 "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
223 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
224 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
225 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
226 pci_set_region(&r_inbound,
227 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
228 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
230 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
232 set_inbound_window(pi--, &r_inbound,
233 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
235 /* configure inbound window for slave's ucode and ENV */
236 debug("PCIEBOOT - MASTER: Inbound window for slave's "
238 "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
239 (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
240 (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
241 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
242 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE)
244 pci_set_region(&r_inbound,
245 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
246 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
248 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
250 set_inbound_window(pi--, &r_inbound,
251 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
254 static void fsl_pcie_boot_master_release_slave(int port)
256 unsigned long release_addr;
258 /* now release slave's core 0 */
261 release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
262 + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
264 #ifdef CONFIG_SYS_PCIE2_MEM_VIRT
266 release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
267 + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
270 #ifdef CONFIG_SYS_PCIE3_MEM_VIRT
272 release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
273 + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
280 if (release_addr != 0) {
281 out_be32((void *)release_addr,
282 CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
283 debug("PCIEBOOT - MASTER: "
284 "Release slave successfully! Now the slave should start up!\n");
286 debug("PCIEBOOT - MASTER: "
287 "Release slave failed!\n");
292 void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
294 u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr;
295 u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data;
299 int enabled, r, inbound = 0;
307 #if defined(CONFIG_FSL_PCIE_DISABLE_ASPM)
311 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr;
312 struct pci_region *reg = hose->regions + hose->region_count;
313 pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
315 /* Initialize ATMU registers based on hose regions and flags */
316 volatile pot_t *po = &pci->pot[1]; /* skip 0 */
319 u64 out_hi = 0, out_lo = -1ULL;
320 u32 pcicsrbar, pcicsrbar_sz;
322 pci_setup_indirect(hose, cfg_addr, cfg_data);
325 /* Configure the PCIE controller core clock ratio */
326 pci_hose_write_config_dword(hose, dev, 0x440,
327 ((gd->bus_clk / 1000000) *
328 (16 / PEX_CCB_DIV)) / 333);
330 block_rev = in_be32(&pci->block_rev1);
331 if (PEX_IP_BLK_REV_2_2 <= block_rev) {
332 pi = &pci->pit[2]; /* 0xDC0 */
334 pi = &pci->pit[3]; /* 0xDE0 */
337 /* Handle setup of outbound windows first */
338 for (r = 0; r < hose->region_count; r++) {
339 unsigned long flags = hose->regions[r].flags;
340 u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
342 flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE;
343 if (flags != PCI_REGION_SYS_MEMORY) {
344 u64 start = hose->regions[r].bus_start;
345 u64 end = start + hose->regions[r].size;
347 out_be32(&po->powbar, hose->regions[r].phys_start >> 12);
348 out_be32(&po->potar, start >> 12);
349 #ifdef CONFIG_SYS_PCI_64BIT
350 out_be32(&po->potear, start >> 44);
352 out_be32(&po->potear, 0);
354 if (hose->regions[r].flags & PCI_REGION_IO) {
355 out_be32(&po->powar, POWAR_EN | sz |
356 POWAR_IO_READ | POWAR_IO_WRITE);
358 out_be32(&po->powar, POWAR_EN | sz |
359 POWAR_MEM_READ | POWAR_MEM_WRITE);
360 out_lo = min(start, out_lo);
361 out_hi = max(end, out_hi);
366 debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi);
368 /* setup PCSRBAR/PEXCSRBAR */
369 pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
370 pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
371 pcicsrbar_sz = ~pcicsrbar_sz + 1;
373 if (out_hi < (0x100000000ull - pcicsrbar_sz) ||
374 (out_lo > 0x100000000ull))
375 pcicsrbar = 0x100000000ull - pcicsrbar_sz;
377 pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz;
378 pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar);
380 out_lo = min(out_lo, (u64)pcicsrbar);
382 debug("PCICSRBAR @ 0x%x\n", pcicsrbar);
384 pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS,
385 pcicsrbar_sz, PCI_REGION_SYS_MEMORY);
386 hose->region_count++;
388 /* see if we are a PCIe or PCI controller */
389 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
390 pci_dcr = pcie_cap_pos + 0x08;
391 pci_dsr = pcie_cap_pos + 0x0a;
392 pci_lsr = pcie_cap_pos + 0x12;
394 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
396 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
397 /* boot from PCIE --master */
398 char *s = env_get("bootmaster");
400 sprintf(pcie, "PCIE%d", pci_info->pci_num);
402 if (s && (strcmp(s, pcie) == 0)) {
403 debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n",
405 fsl_pcie_boot_master((pit_t *)pi);
408 inbound = fsl_pci_setup_inbound_windows(hose,
409 out_lo, pcie_cap, pi);
413 inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi);
416 for (r = 0; r < hose->region_count; r++)
417 debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r,
418 (u64)hose->regions[r].phys_start,
419 (u64)hose->regions[r].bus_start,
420 (u64)hose->regions[r].size,
421 hose->regions[r].flags);
423 pci_register_hose(hose);
424 pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
425 hose->current_busno = hose->first_busno;
427 out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */
428 out_be32(&pci->peer, ~0x20140); /* Enable All Error Interrupts except
429 * - Master abort (pci)
430 * - Master PERR (pci)
433 pci_hose_read_config_dword(hose, dev, pci_dcr, &temp32);
434 temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
435 pci_hose_write_config_dword(hose, dev, pci_dcr, temp32);
437 #if defined(CONFIG_FSL_PCIE_DISABLE_ASPM)
438 pci_lcr = pcie_cap_pos + 0x10;
440 pci_hose_read_config_dword(hose, dev, pci_lcr, &temp32);
441 temp32 &= ~0x03; /* Disable ASPM */
442 pci_hose_write_config_dword(hose, dev, pci_lcr, temp32);
445 if (pcie_cap == PCI_CAP_ID_EXP) {
446 if (block_rev >= PEX_IP_BLK_REV_3_0) {
447 #define PEX_CSR0_LTSSM_MASK 0xFC
448 #define PEX_CSR0_LTSSM_SHIFT 2
449 ltssm = (in_be32(&pci->pex_csr0)
450 & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT;
451 enabled = (ltssm == 0x11) ? 1 : 0;
452 #ifdef CONFIG_FSL_PCIE_RESET
454 /* assert PCIe reset */
455 setbits_be32(&pci->pdb_stat, 0x08000000);
456 (void) in_be32(&pci->pdb_stat);
458 /* clear PCIe reset */
459 clrbits_be32(&pci->pdb_stat, 0x08000000);
461 for (i = 0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
462 pci_hose_read_config_word(hose, dev, PCI_LTSSM,
468 /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */
469 /* enabled = ltssm >= PCI_LTSSM_L0; */
470 pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
471 enabled = ltssm >= PCI_LTSSM_L0;
473 #ifdef CONFIG_FSL_PCIE_RESET
476 debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm);
477 /* assert PCIe reset */
478 setbits_be32(&pci->pdb_stat, 0x08000000);
479 (void) in_be32(&pci->pdb_stat);
481 debug(" Asserting PCIe reset @%p = %x\n",
482 &pci->pdb_stat, in_be32(&pci->pdb_stat));
483 /* clear PCIe reset */
484 clrbits_be32(&pci->pdb_stat, 0x08000000);
486 for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
487 pci_hose_read_config_word(hose, dev, PCI_LTSSM,
490 debug("....PCIe link error. "
491 "LTSSM=0x%02x.\n", ltssm);
493 enabled = ltssm >= PCI_LTSSM_L0;
495 /* we need to re-write the bar0 since a reset will
498 pci_hose_write_config_dword(hose, dev,
499 PCI_BASE_ADDRESS_0, pcicsrbar);
504 #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
506 serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
507 temp32 = in_be32(&srds_regs->srdspccr0);
509 if ((temp32 >> 28) == 3) {
512 out_be32(&srds_regs->srdspccr0, 2 << 28);
513 setbits_be32(&pci->pdb_stat, 0x08000000);
514 in_be32(&pci->pdb_stat);
516 clrbits_be32(&pci->pdb_stat, 0x08000000);
518 for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
519 pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
522 enabled = ltssm >= PCI_LTSSM_L0;
527 /* Let the user know there's no PCIe link for root
528 * complex. for endpoint, the link may not setup, so
529 * print undetermined.
531 if (fsl_is_pci_agent(hose))
532 printf("undetermined, regs @ 0x%lx\n", pci_info->regs);
534 printf("no link, regs @ 0x%lx\n", pci_info->regs);
535 hose->last_busno = hose->first_busno;
539 out_be32(&pci->pme_msg_det, 0xffffffff);
540 out_be32(&pci->pme_msg_int_en, 0xffffffff);
542 /* Print the negotiated PCIe link width */
543 pci_hose_read_config_word(hose, dev, pci_lsr, &temp16);
544 printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
545 (temp16 & 0xf), pci_info->regs);
547 hose->current_busno++; /* Start scan with secondary */
548 pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
551 #ifdef CONFIG_SYS_FSL_ERRATUM_A007815
552 /* The Read-Only Write Enable bit defaults to 1 instead of 0.
553 * Set to 0 to protect the read-only registers.
555 clrbits_be32(&pci->dbi_ro_wr_en, 0x01);
558 /* Use generic setup_device to initialize standard pci regs,
559 * but do not allocate any windows since any BAR found (such
560 * as PCSRBAR) is not in this cpu's memory space.
562 pciauto_setup_device(hose, dev, 0, hose->pci_mem,
563 hose->pci_prefetch, hose->pci_io);
566 pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
567 pci_hose_write_config_word(hose, dev, PCI_COMMAND,
568 temp16 | PCI_COMMAND_MEMORY);
571 #ifndef CONFIG_PCI_NOSCAN
572 if (!fsl_is_pci_agent(hose)) {
573 debug(" Scanning PCI bus %02x\n",
574 hose->current_busno);
575 hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
577 debug(" Not scanning PCI bus %02x. PI=%x\n",
578 hose->current_busno, temp8);
579 hose->last_busno = hose->current_busno;
582 /* if we are PCIe - update limit regs and subordinate busno
583 * for the virtual P2P bridge
585 if (pcie_cap == PCI_CAP_ID_EXP) {
586 pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
589 hose->last_busno = hose->current_busno;
592 /* Clear all error indications */
593 if (pcie_cap == PCI_CAP_ID_EXP)
594 out_be32(&pci->pme_msg_det, 0xffffffff);
595 out_be32(&pci->pedr, 0xffffffff);
597 pci_hose_read_config_word(hose, dev, pci_dsr, &temp16);
599 pci_hose_write_config_word(hose, dev, pci_dsr, 0xffff);
602 pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
604 pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
608 int fsl_is_pci_agent(struct pci_controller *hose)
612 pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
614 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
615 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
616 if (pcie_cap == PCI_CAP_ID_EXP) {
619 pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE,
621 return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
625 pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
626 /* Programming Interface (PCI_CLASS_PROG)
627 * 0 == pci host or pcie root-complex,
628 * 1 == pci agent or pcie end-point
630 return (prog_if == FSL_PROG_IF_AGENT);
634 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
635 struct pci_controller *hose, int busno)
637 volatile ccsr_fsl_pci_t *pci;
638 struct pci_region *r;
639 pci_dev_t dev = PCI_BDF(busno,0,0);
643 pci = (ccsr_fsl_pci_t *) pci_info->regs;
645 /* on non-PCIe controllers we don't have pme_msg_det so this code
646 * should do nothing since the read will return 0
648 if (in_be32(&pci->pme_msg_det)) {
649 out_be32(&pci->pme_msg_det, 0xffffffff);
650 debug (" with errors. Clearing. Now 0x%08x",
654 r = hose->regions + hose->region_count;
656 /* outbound memory */
670 hose->region_count = r - hose->regions;
671 hose->first_busno = busno;
673 fsl_pci_init(hose, pci_info);
675 if (fsl_is_pci_agent(hose)) {
676 fsl_pci_config_unlock(hose);
677 hose->last_busno = hose->first_busno;
678 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
680 /* boot from PCIE --master releases slave's core 0 */
681 char *s = env_get("bootmaster");
683 sprintf(pcie, "PCIE%d", pci_info->pci_num);
685 if (s && (strcmp(s, pcie) == 0))
686 fsl_pcie_boot_master_release_slave(pci_info->pci_num);
690 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
691 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
692 printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
693 "e" : "", pci_info->pci_num,
694 hose->first_busno, hose->last_busno);
695 return(hose->last_busno + 1);
698 /* Enable inbound PCI config cycles for agent/endpoint interface */
699 void fsl_pci_config_unlock(struct pci_controller *hose)
701 pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
706 if (!fsl_is_pci_agent(hose))
709 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
710 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
711 if (pcie_cap != 0x0) {
712 ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr;
713 u32 block_rev = in_be32(&pci->block_rev1);
714 /* PCIe - set CFG_READY bit of Configuration Ready Register */
715 if (block_rev >= PEX_IP_BLK_REV_3_0)
716 setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY);
718 pci_hose_write_config_byte(hose, dev,
719 FSL_PCIE_CFG_RDY, 0x1);
721 /* PCI - clear ACL bit of PBFR */
722 pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
724 pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr);
728 #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || \
729 defined(CONFIG_PCIE3) || defined(CONFIG_PCIE4)
730 int fsl_configure_pcie(struct fsl_pci_info *info,
731 struct pci_controller *hose,
732 const char *connected, int busno)
736 set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
737 set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
739 is_endpoint = fsl_setup_hose(hose, info->regs);
740 printf("PCIe%u: %s", info->pci_num,
741 is_endpoint ? "Endpoint" : "Root Complex");
743 printf(" of %s", connected);
746 return fsl_pci_init_port(info, hose, busno);
749 #if defined(CONFIG_FSL_CORENET)
750 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
751 #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
752 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
753 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
754 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
756 #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
757 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
758 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
759 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
761 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
762 #elif defined(CONFIG_MPC85xx)
763 #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
764 #define _DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2
765 #define _DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3
766 #define _DEVDISR_PCIE4 0
767 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
768 #elif defined(CONFIG_MPC86xx)
769 #define _DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIE1
770 #define _DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIE2
771 #define _DEVDISR_PCIE3 0
772 #define _DEVDISR_PCIE4 0
773 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \
774 (&((immap_t *)CONFIG_SYS_IMMR)->im_gur)
776 #error "No defines for DEVDISR_PCIE"
779 /* Implement a dummy function for those platforms w/o SERDES */
780 static const char *__board_serdes_name(enum srds_prtcl device)
783 #ifdef CONFIG_SYS_PCIE1_NAME
785 return CONFIG_SYS_PCIE1_NAME;
787 #ifdef CONFIG_SYS_PCIE2_NAME
789 return CONFIG_SYS_PCIE2_NAME;
791 #ifdef CONFIG_SYS_PCIE3_NAME
793 return CONFIG_SYS_PCIE3_NAME;
795 #ifdef CONFIG_SYS_PCIE4_NAME
797 return CONFIG_SYS_PCIE4_NAME;
806 __attribute__((weak, alias("__board_serdes_name"))) const char *
807 board_serdes_name(enum srds_prtcl device);
809 static u32 devdisr_mask[] = {
816 int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
817 struct fsl_pci_info *pci_info)
819 struct pci_controller *hose;
820 int num = dev - PCIE1;
822 hose = calloc(1, sizeof(struct pci_controller));
826 if (is_serdes_configured(dev) && !(devdisr & devdisr_mask[num])) {
827 busno = fsl_configure_pcie(pci_info, hose,
828 board_serdes_name(dev), busno);
830 printf("PCIe%d: disabled\n", num + 1);
836 int fsl_pcie_init_board(int busno)
838 struct fsl_pci_info pci_info;
839 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
843 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
844 addr = &gur->devdisr3;
846 addr = &gur->devdisr;
848 devdisr = in_be32(addr);
851 SET_STD_PCIE_INFO(pci_info, 1);
852 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
854 setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
858 SET_STD_PCIE_INFO(pci_info, 2);
859 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
861 setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
865 SET_STD_PCIE_INFO(pci_info, 3);
866 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
868 setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
872 SET_STD_PCIE_INFO(pci_info, 4);
873 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
875 setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
881 int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
882 struct fsl_pci_info *pci_info)
887 int fsl_pcie_init_board(int busno)
893 #ifdef CONFIG_OF_BOARD_SETUP
894 #include <linux/libfdt.h>
895 #include <fdt_support.h>
897 void ft_fsl_pci_setup(void *blob, const char *pci_compat,
898 unsigned long ctrl_addr)
902 phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr;
903 struct pci_controller *hose;
905 hose = find_hose_by_cfg_addr((void *)(ctrl_addr));
907 /* convert ctrl_addr to true physical address */
908 p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR;
909 p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS;
911 off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr);
916 /* We assume a cfg_addr not being set means we didn't setup the controller */
917 if ((hose == NULL) || (hose->cfg_addr == NULL)) {
918 fdt_del_node(blob, off);
921 bus_range[1] = hose->last_busno - hose->first_busno;
922 fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
923 fdt_pci_dma_ranges(blob, off, hose);